|
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil |
| 2 | Providing and laying Stone solling Hand packed including compacting, watering including all carriages of material complete. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level (1:4:8) (1Cement: 4 fine sand: 8 grade stone aggregate 40mm nominal size) |
| 4 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 5.1.2 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size 20mm nominal size) Crushed. (All Works up to Plinth level) |
| 5 | Providing/laying in position specified grade excluding the cost of centering & shuttering . (M-10 Mix) 1:3:6 (1 Cement: 3 Coarse Sand: 6 graded stone aggregate 20mm nominal size- crushed.) |
| 6 | Centering and shuttering including strutting propping etc. removal of form work in Raft,foundation and plinth (All works upto Plinth level) |
| 7 | Back filling with 2nd class sand/ stone dust/boulders inside plinth including watering, ramming rolling etc including all carriages and costs complete job. |
| 8 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: 1:4 (1 cement and 4 coarse Sand ) including curing incl Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto first floor level |
| 9 | Providing and fixing of wood work in frames of door/ window /arch windows /ventilator wrought frames (chowkats) imported Kd Wood. |
| 10 | Providing and fixing 40 x5mm flat iron hold fast including fixing of frames with nuts and bolts. |
| 11 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, Coloumns, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 12 | Steel reinforcement for R.C.C. work ready to use \\"cut and bend\\" rebars of approved make from factory/workshop to construction site including placing in position and binding all complete above plinth level. 5.22C.1Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 13 | Centering and shuttering including strutting propping etc. removal of form work in in lintel bands, roof bands etc (Above plinth level) Lintel, beams, plinth beams, girders, bressumers and cantilevers |
| 14 | Structural steel work welded in built up sections and frame work including cutting, hoisting fixing in position all complete in angles / flats / tubes including MS sheet for chejja,soffits and eveas boarding complete job etc. |
| 15 | Providing and fixing with High rib colored profile sheet roofing including vertical/curved surface including polymer coated J. or L hooks,fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters 0.50mm Thick including cost of ridge hips and valleys. |
| 16 | CEMENT PLASTER (IN FINE SAND)12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) |
| 17 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 13.88.2 2 mm thick |
| 18 | Finishing walls with waterproof cement paint of approved brand and manufacture of required shade to give an even shade on new works all complete job. |
| 19 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 20 | Providing and fixing 30 mm thick Imported KD panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws including cost of 12mm thick Pre-laminated particle board both sides laminated for door shutters. |
| 21 | Applying Priming coat with ready mixed colour primer of approved brand and manufacture on steel and wood work. |
| 22 | Painting with synthetic enamel paint to give an even shade two or more coates of approved brand and manufacture on wood. |
| 23 | Providing and fixing aluminium harware fittingsAldrop with lock |
| 24 | Tower bolt 150mmx10mm |
| 25 | Tower bolt 100mmx10mm |
| 26 | Handle 125mm |
| 27 | Handle100mm |
| 28 | Hooks |
| 29 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50 mm thick with 20mm nominal size stone aggregat |
| 30 | Providing /F Heavy duty glass panes 3.5 mm thick )instead of ordinary glass panes13.75kg/sqm in doors windows and clerestory window shutters (Area of opening for glass panes excld portion inside shall be measured)incl cost of beading nails complete |
| 31 | Carriage of materials by Mechanical Transport including loading, unloading and stackinga)Sand |
| 32 | b)Aggregates |
| 33 | c)Bricks |
| 34 | d)Steel |
| 35 | e)Cement |
| 36 | Lighting point (one lighting point includes wiring of lighting point in 1.5 sq.mm PVC insulated copper wire and 2.5 sq.mm PVC insulated multistrand copper wire,6 amp one way swittch6 amp S pole MCB,10 amp DP MCB,2 way DB MCB and hylem sheet with 16/15 Watt LED surface lights.including cost of channelsas per requirement.One point controlled by one 6 amp switch.( upto 10 meters)including Placing and fixing in position 25mm PVC Conduit pipes with necessary bends and other fittings in RCC Work |
| 37 | Providing and fixing one fan point includes wiring for lighting points in 1.5sqmm pvc insulated copper wire and 2.5sqmm pvc in multi -strant copper wire 1200mm ceilling fan electronic fan dimmer.6Amp s pole MCB-10AMP DP MCB 2 Way DB for housing MCB or lightting circuits and hylem sheet.including Placing and fixing in position Fan clamp boxes with MS Fan clamps connected with network Conduit pipes with necessary fittings in RCC Work Please Enable Macros to View BoQ information |
