|
| 1 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \\"T\\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \\"T\\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.52.2 GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece. |
| 2 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 3 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 4 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :13.43.1Water thinnable cement primer |
| 5 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :13.60.1 Two or more coats on new work |
| 6 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :13.99.1 One or more coats on old work |
| 7 | Floor polishing on masonry or concrete floors with wax polish of approved brand and manufacture. |
| 8 | Float glass panes9.7.7.2 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm). |
| 9 | Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete. |
| 10 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 17.2.1 W.C. pan with ISI marked white solid plastic seat and lid |
| 11 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mix |
| 12 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.18.50.1 15 mm nominal bore |
| 13 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Oval shape 450x350 mm (outer dimensions) |
| 14 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 17.73.1 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms |
| 15 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. |
| 16 | Providing fitting fixing PVC panels for wall and ceiling (plain) with material & installation including labour,carriage etc as directed and specified. |
| 17 | Supplying fitting and fixing Johnson Zebra Roller Blinds(Combi Blackout) make and shade, design as per choice complete as specified and directed by the department at all levels. |
| 18 | Providing erecting cutting and fixing of 420 mm depth free standing file cabinate/rack with laminated finished,erected/making to be made with 19mm thick Greenply plywood on all frame structure and required partition with self member as per required height with providing fixing of edge binding in all plywood edges cuitting and pasting with fixing for 1.5mm thick decorative laminated sheet in both side of ply surface including all hardware fittings like,nails,fevicol,pesting tap,handle,lock,hinges,tower bolt,magnate catcher etc. as a complete with all necessary required materials and labour as directed by the concern department. |
| 19 | Finishing of 35mm thick flush Door bothside with 6mm Plyboard Pasting and 1.5mm decorative laminate Pasting,finished with PU polish as per desired colour and shade as per Archietcts instructions and provided with Concealed Door Clouser, Magnetic Door Stopper,125mm long 2.9mm thick Heavy Duty S.S Bearing Hings, Mortice Lock with Handle (All fittings to be of DORMA make as specified in the drawings), complete with all other necessary hardwares as per design,specified and directed by the department/conultant(1x2.1x1.00=2.10M2) |
| 20 | PRODUCT -AL-60 WORKSTATION:- Table top and 1200 HT Partitions Specification : Partition : AL 60, Height 1200 mm Table top 25mm thick Pre-laminate particle board finished with 2mm edge lipping. Tile Finishers Partitions : Partitions is made of 60mm thick with fabric above and laminate below the table top. Fabric magnetic and laminate board markers are provided for each workstation .Return and end screen : 525L x 12mm fabric magnetic screens. Support : MS Brackets and gable ends Wire Management : Grommet Hole provided on table top. Raceway provided below table top. MOBILE PEDESTAL 2D+ 1F SIZE: 400Wx 450D X 600 HT Pedestal: Pedestal are made of 18mm thick. PLB with 2 drawer units and 1 filling folder unit. The Drawer units are made mobile with the use of castors. The drawer units are provided finger grooved handle and suitable locks. CPU TROLLEY AND KEYBOARD TRAY .1500/1350 L x 600/450 D x 750 Ht |
| 21 | Chairs Model: Astro Hb. High mesh back chair Additional lumbar support Single lock synchro mechanism Adjustable arms Nylon base. |
| 22 | ELECTRICAL WORKS Wiring for light point/ fan point/ exhaust fan point/ call bellpoint with 1.5 sq.mm FRLS PVC insulated copper conductorsingle core cable in surface / recessed medium class PVCconduit, with modular switch, modular plate, suitable GI boxand earthing the point with 1.5 sq.mm FRLS PVC insulatedcopper conductor single core cable etc. as required.Group C |
| 23 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 24 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 25 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.4 X 10 sq. mm + 2 X 6 sq. mm earth wire |
| 26 | Supplying and drawing following sizes of FRLS PVC insulatedcopper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required.2 x 1.5 sq. mm |
| 27 | Supplying and fixing following modular switch/ socket on theexisting modular plate & switch box including connections butexcluding modular plate etc. as required.5/6 A switch |
| 28 | Supplying and fixing following modular switch/ socket on theexisting modular plate & switch box including connections butexcluding modular plate etc. as required.15/16 A switch |
| 29 | Supplying and fixing following modular switch/ socket on theexisting modular plate & switch box including connections butexcluding modular plate etc. as required.3 pin 5/6 A socket outlet |
| 30 | Supplying and fixing following modular switch/ socket on theexisting modular plate & switch box including connections butexcluding modular plate etc. as required.6 pin 15/16 A socket outlet |
| 31 | Supplying and fixing following modular switch/ socket on theexisting modular plate & switch box including connections butexcluding modular plate etc. as required.Bell push |
| 32 | Supplying and fixing two module stepped type electronic fanregulator on the existing modular plate switch box includingconnections but excluding modular plate etc. as required. |
| 33 | Supplying and fixing modular blanking plate on the existingmodular plate & switch box excluding modular plate asrequired. |
| 34 | Supplying and fixing following size/ modules, GI box alongwithmodular base & cover plate for modular switches in recess etc.as required.1 or 2 Module (75mmX75mm) |
| 35 | Supplying and fixing following size/ modules, GI box alongwithmodular base & cover plate for modular switches in recess etc.as required.3 Module (100mmX75mm) |
| 36 | Supplying and fixing following size/ modules, GI box alongwithmodular base & cover plate for modular switches in recess etc.as required.6 Module (200mmX75mm) |
| 37 | Supplying and fixing following size/ modules, GI box alongwithmodular base & cover plate for modular switches in recess etc.as required.8 Module (125mmX125mm) |
| 38 | Supplying and fixing following size/ modules, GI box alongwithmodular base & cover plate for modular switches in recess etc.as required.12 Module (200mmX150mm) |
| 39 | Supplying and fixing following Modular base & cover plate onexisting modular metal boxes etc. as required.1or 2 Module |
| 40 | Supplying and fixing following Modular base & cover plate onexisting modular metal boxes etc. as required.3 Module |
| 41 | Supplying and fixing following Modular base & cover plate onexisting modular metal boxes etc. as required.6 Module |
| 42 | Supplying and fixing following Modular base & cover plate onexisting modular metal boxes etc. as required.8 Module |
| 43 | Supplying and fixing following Modular base & cover plate onexisting modular metal boxes etc. as required.12 Module |
| 44 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. |
| 45 | Supplying and fixing call bell/ buzzer suitable for single phase,230 V, complete as required. |
| 46 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)8 way (4 + 24), Double door |
| 47 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\"curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing MCB DB complete withconnections, testing and commissioning etc. as required. Single pole |
| 48 | Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63A |
| 49 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 50 | Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 51 | Supplying and drawing of UTP 4 Pair CAT 6 Cable in the existing surface/recessed/recessed steel/PVC conduit as required. 1 Run of Cable |
| 52 | Supplying and installation of 1200 mm Service value including parts and accessories Electric Ceiling type fan as per IS 374 as specified and directed by the Department.(GEM PRODUCT ID 5116877-27701688893) (ORIENT/CROMPTON or equivalent make) |
| 53 | Supplying and installation of 18W Lighting Fixtures and accessories general lighting and fixtures LED round Luminaire(Recessed Luminaire) Rev 1 as specified and directed by the Department.(GEM PRODUCT ID 5116877-1118099557) (ORIENT/CROMPTON/LEDURE or equivalent make) |
| 54 | Supplying and installation of 22 W 6500K LED Tube Light in the wall or Ceiling as specified and directed by the department.(GEM PRODUCT ID 5116877-54514503502) (BAJAJ/ CROMPTON/HALONIX or equivalent make) |
| 55 | Supplying including installation of 250 mm size Air Circulation Parts and Accessories Propeller Type AC Ventilating Fan-Exhaust as per 2312 as specified and directed by the Department.(GEM PRODUCT ID 5116877-91357083604)(BAJAJ/CROMPTON/ORIENT or equivalent make) |
| 56 | Supplying including installation of 24 Ports Web Managed Non PoE Layer 2 Access Switch as Specified & Directed by the Department.(GEM Product ID 5116877-71712613760) |
| 57 | Supplying including installation of Home Domestic Appliances and Supplies and Consumer Electronic Products Domestic Appliances other Domestic Household Appliances Wall Fan as specified and directed by the Department.(GEM PRODUCT ID 5116877-47365460713)(CROMPTON/BAJAJ/ORIENT or equivalent make) |
| 58 | Supplying with fitting and fixing of Single Phase Modular Motor Starter switch MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department. |
| 59 | Supplying including installation of Home Distribution and Conditioning Systems and Equipment and Heating and Ventilation and Air Circulation Matelic Mount Suitable for Air Conditioner (Accessories) as specified and directed by the Department.(GEM PRODUCT ID 5116877-74236143769)(VOLTAZ/CARRIER/BLUESTAR or equivalent make) |
| 60 | Supplying including installation of 2 Ton with 5 BEE Star rating Split Type Air Conditioners including Green AC and Air Circulation Cooling Equipment and Parts and Accessories as specified and directed by the Department.(GEM PRODUCT ID 5116877-32630235651)(VOLTAZ/CARRIER/BLUESTAR or equivalent make) |
| 61 | Supplying including installation of Digital Voltmeter with selector switch to measure input/output voltage 5.0 KVA Automatic Line Voltage Corrector or Step Type Auto Transformer as specified and directed by the Department.(GEM PRODUCT ID 5116877-16964573993)(MICROTECH/V GUARD or equivalent make) |
| 62 | Supplying including installation of Home Distribution and Conditioning Systems and Equipment and Componets Heating and Ventilation and Air Circulation Extra Refrigerant Pipe for Air Conditioners (Accessories) as specified and directed by the Department.(GEM PRODUCT ID 5116877-93181769304)(PANASONIC/CARRIER/GODREJ or equivalent make) |
| 63 | Supplying including installation of 16 A, 250V PP Single Multi Pin Electrical Top for industrial application as specified and directed by the Department.(GEM PRODUCT ID 5116877-143845831)(GREATWHITE/HAVELL's/C&S or equivalent make) |
| 64 | Supplying including installation of 3J3 CAT6 U/UTP Patch Cord of 3.0 Mtrs.length as Specified & Directed by the Department.(GEM Product ID 5116877-32478887937) |
| 65 | Supplying including installation of RJ 45 based Surge Supressor as Specified & Directed by the Department.(GEM Product ID 5116877-26019079636) |
| 66 | Supplying including installation of Surface Mount box along with face plate as Specified & Directed by the Department.(D-Link NBB-011) |
| 67 | Supplying including installation of 48U Rack Enclosures Networking/Server Rack as Specified & Directed by the Department.(GEM Product ID 5116877-92274766441) |
| 68 | Supplying including installation of Datacom and Network Connectivity installation Device and Equipment 24 Port Rock mounted Fibre Patch Panel(LIU) as Specified & Directed by the Department.(GEM Product ID 5116877-62140525595) Please Enable Macros to View BoQ information |
