|
| 1 | TOTAL QUOTED AMOUNT |
| 2 | FURNITURE |
| 3 | Single Bed - |
| 4 | Single Bed Matres : 78\\" x 38\\" x 6\\"' (Kurlon) |
| 5 | WARDROBE: Supply and fixing of wooden cupboard size 9' x 4' depth 2' double door finish with 19mm thick plywood side , top,bottam, shutter back side 12mm ply outside finish with 1.5mm veneer and inside 1.0mm thick laminate ,finish veneer pu polish finish as per design. |
| 6 | SIDE UNIT : Supply and fixing of Side Table size 2' x 1'-6\\" depth 1'-6\\" finish with 19mm thick plywood side , top,bottam, back side 12mm ply outside finish with 1.5mm veneer and inside veneer ,finish veneer pu polish finish as per design. |
| 7 | LAUGAGE RACK : Supply and fixing of Laugage Rack size 4' x 2'-6\\" depth 2' double door finish with 19mm thick plywood side , top,bottam, shutter back side 12mm ply outside finish with 1.5mm veneer and inside 1.0mm thick laminate ,finish veneer pu polish finish as per design. |
| 8 | Bed Sheet (Single) |
| 9 | Pillow |
| 10 | Pillow Cover |
| 11 | Bath Towel |
| 12 | Revolving Chair |
| 13 | Visitor's Chair |
| 14 | 3 SEATER SOFA : Supply and fixing of Single seater sofa wooden frame works with pu polish and seat ,back 3\\" HD foam with cloth finish as per design. |
| 15 | CENTRE TABLE: Supply and fixing of Center table wooden frame works with pu polish and top 12mm thick colour glass as per design. |
| 16 | STUDY TABLE: (600MM X 1050MM) Supplying, fitting & fixing Study Table with 19 mm thick ply board with polish as per direction of EIC |
| 17 | Study Table |
| 18 | ELECTRICAL WORKS |
| 19 | SUPPLYING OF FOLLOWING XLPE INSULATED ALUMINUM CONDUCTOR ARMORED CABLES OF1.1 KV GRADE (Rate in Rs. Per Mtr) [ Make - Finolex/ KEI/ Gloster/Havells/ as per choice of EIC].a) 4 core 25sqmm |
| 20 | b) 4 core 16sqmm |
| 21 | Supply of LED Bulk-head 10 Watt,IP-66 protection,wall mounting or fixing.(make-Philips,cat-WT202W LED10S CW PSU S3 PC/CG/Havells as per choice of EIC) |
| 22 | Supply of 20 Watt LED Tube Light/ Essential Smart Bright batten.(make-Philips,cat-BN170C LED20S-6500 PSU L120/CG/Havells as per choice of EIC) |
| 23 | Supply of 40 Watt LED Tube Light/ Essential Smart Bright batten.(make-Philips,cat-BN170C LED40S-6500 PSU L120/CG/Havells as per choice of EIC) |
| 24 | Supply of 6\\"x6\\" 12-16 watt recessed Led light Square light.(make-Philips,cat-SM251/261 LED16S 6500 PSU WH/CG/Havells) |
| 25 | Supply & Fixing of 5mtr Led strip light with driver and necessary items .(make-Philips, (Tunable)/CG/Havells) |
| 26 | Supply of 230-250V, 400mm sweep, high speed WALL FAN/Cabin fan.(make-Usha, /Orient/Crompton/EPC as per choice of EIC) |
| 27 | Supply of 230-250V, 900/1400 RPM, 230mm sweep Exhaust fan.(make-Usha/Orient/Crompton/EPC as per choice of EIC) |
| 28 | Supply of 230-250V, 900/1400 RPM, 300 mm sweep Exhaust fan.(make-Usha/Orient/Crompton/EPC as per choice of EIC) |
| 29 | Supply of 230-250V, 450mm sweep Pedestal.(make-Usha/Orient/Crompton/EPC as per choice of EIC) |
| 30 | Supply and Installation of 1.9/2 TON Split type air conditioning machine of following tonnage capacity 3 star rating filled with rotary crompresser and cooling capacity min. (6600 k cal/Hr., minimum discharge air flow 800cum mtr) compressor warrenty 5 years,as per direction of the EIC. Make- Mitsubishi/ O General or 2 ton equivalent as per direction of EIC.2.0 Ton 3 star non-inverter type |
| 31 | Supply and Installation of 1.5 TON Split type air conditioning machine of following tonnage capacity 3 star rating filled with rotary crompresser and cooling capacity min. (6600 k cal/Hr., minimum discharge air flow 800cum mtr) compressor warrenty 5 years,as per direction of the EIC. Make- Mitsubishi/ O General or 1.5 ton equivalent as per direction of EIC.1.5 Ton 3 star non-inverter type |
| 32 | Supply, Installation, Testing, Commissioning of 15L Vertical Energy Efficient Storage Water Heater(Geyser) with Standard Installation & Pipes | Temperature Display | Temperature Knob | Titanium Enameled Coating, [Make: Recold/ Usha / Jaguar /Havells Equiv. as per EIC choice] |
| 33 | Supply of Beetel Telephone set, Model no : C11 |
| 34 | Supplying of Beetel make M78/B77 Rossefle Box |
| 35 | CIVIL WORKS |
| 36 | Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75m. |
| 37 | Dismanting all types of plain cement concrete works. Stacking servicable materials at site and removing rubbish as directed within a lead of 75m.(a) upto 150 mm. thick |
| 38 | Stripping off worn out plaster and raking out joints of wall, celings, etc. upto any height and in any floor including removing rubbish and stacking any where within the compound as directed. |
| 39 | Cleaning the exposed reinforcement preferably upto full diameter by wire brush, applying two coats of polymer based rust removing compound left for 24 hours,removing the coating and then applying two (2) coats of polymer modified anti corrosive protective coating formulated to inhibit the corrosion of reinforcement as per manufacturer's specification] |
| 40 | Applying epoxy based reactive jointing agent for jointing the old concrete with fresh concrete to be applied within manufacturer’s specified time as per manufacturers specification. |
| 41 | Dismantling artificial stone flooring upto 50 mm. thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75 m. In ground floor including roof. |
| 42 | Taking out Mirzapur or glazed porcelain tiles carefully by chiselling from walls or floor including stacking serviceable material as directed. |
| 43 | Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound , in conformity with the Municipal/ Corporation Rules for such disposal , loading into truck and cleaning the site in all respect as per direction of E.I.C. |
| 44 | Post Constructional Measures :d) Anti-termite treatment to the junction of wood work and masonry walls with chemical emulsion by admixing chloropyrofos emulsifiable concentrates (1% concentration) with water by weight including spraying at the points of contact with the adjoining masonry by drilling 6m. dia holes at a downward angle of about 45 degree at the junction of woodwork and masonry and squirting chemical emulsion into these holes at the rate of half litre per hole. The entire work is to be carried out as per specification of Code I.S.-6313 (Part-III)-1981. The shutters are to be sprayed with emulsion. on both sides. All wooden fixtures like almirahs, racks etc. are also to be throughly sprayed with chemical emulsion. (Payment will be made on the basis of outside measurements of doors and windows) |
| 45 | (e) Spot application for insecticides using Aqua base spray for pest (for bugs, cockroaches, silverfish, spider, termites, mosquitoes) to walls and ceiling etc. with chemical emulsion by admixing chloropyrofos emulsifiable concentrates (1% concentration) with water by weight including spraying the emulsified chemical @ 0.5 litres per sq.m. by a hand operated pressure pump on wall surfaces, ceiling, electrical fixture,electrical lines including drilling holes inplaces where source of termite is detected squirting chemical solution into the holes and sealing the holes with cement grout. (Rate is per sq.m. of the floor area while actual work will be all walls ceiling, rack, partition and furniture). |
| 46 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. |
| 47 | Brick work with 1st class bricks in cement mortar (1:6) |
| 48 | Labour for Chipping of concrete surface before taking up Plastering work. |
| 49 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary.With 1:6 cement mortar(b) 20 mm thick plasterFirst Floor including roof Roof ( Roof, Stair Room & Parapet ) |
| 50 | With 1:4 cement mortar(c) 10 mm thick plaster - only rcc surface |
| 51 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by syntheticadhesive & grout materials etc.(B) WallWith Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.mArea of each tile above 0.09 Sqm , (ii) Other than Coloured decorative including white 1st Floor |
| 52 | Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finishcomplete including the cost of materials, labour and all otherincidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor.) (I) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment. |
| 53 | Supplying, fitting and fixing Marble Slab/tile of 15 to 18 mm thickness in floor, lobby, stair, landing & treads etc. over 20 mm (av.) thck base of Cement mortar (1:2) laid with white cement slurry @ 4.4 kg/Sq.m before placing marble & jointed with white cement slurry @ 2.0 kg/Sq.m with necessary pigments including grinding and Granite polishing as per direction of Engineering -in -Charge in Ground Floor. {White cement and Pigment to be supplied by the Agency](a) With Makrana plain pink / Adranga Pink / Garbh Gulabi / Udaypur pink / Udaypur Green / Black Bhaslanaiii) Area of each Slab/tile exceeding 0.60 sq.m but not exceeding 1.00 sq.m. |
| 54 | Extra cost of labour for prefinished and premoulded Nosing to treads of steps, railing, window sill etc. of Marble Stone. |
| 55 | Extra cost of labour for Marble Stone Floor in treads of Steps |
| 56 | Supplying, fitting and fixing fibre reinforced polymer (FRP) Composite door frame as per approved section with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to safisfy IS: 4020 door testing performance criteria..(i) 66mm x 90mm |
| 57 | Supplying solid flush type doors of deluxe decorative (both side) quality, conforming to I:S 2202 timber frame consisting of top and bottom rail and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 27.5mm wide battens places both ways in order to made the door of solid core and internal lipping with teak, mahogony or rose wood approved decorative veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing the shutters in position but excluding the cost of hinges and other fittings in ground floor:(a) 35mm thick shutters (Double leaf) |
| 58 | Supplying, fitting & fixing fibre reinforced polymer (FRP) Composite door shutters as per approved design with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to satisfy IS:4020 door testing performance criteria.In ground floor(i) 32 mm thick |
| 59 | Oxidised Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark.(viii) 100mm. X 75mm. X 3.50mm. |
| 60 | ii) Brass hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting.(c) 300mm long. |
| 61 | (b) Supplying 'Godrej' mortice lock chromium plated with keys 6 levers including fitting & fixing complete |
| 62 | Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws:(iv) 150mm long x 10mm dia. bolt. |
| 63 | (ix) 300mm long x 10mm dia. bolt. |
| 64 | Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete : (vii) 150 mm grip x 12 mm dia rod. |
| 65 | (ii) 100 mm grip x 10 mm dia rod. |
| 66 | Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle/MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-incharge.The rate includes the cost of labour, adhesive and all incidental charges thereof.Glossy/Matt/Suede excluding surface texture or metallic lustre.(i) Thickness of laminate 1.5mm |
| 67 | M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.(ii) Grill weighing above 16 Kg./sq.mtr and above |
| 68 | Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottom guide rail, 20mm x 10mm x 2mm vertical channels 100mm apart in fully stretched position 20mm x 5mm M.S. flats as collapsible bracings properly rivetted and washered including 38mm steel rollers including locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc. and making good damages complete. |
| 69 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. |
| 70 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primerb) Premium 100% Acrylic Emulsion |
| 71 | Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand (1.5mm thick) |
| 72 | Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.i) Water based interior grade Acrylic Primer a) One Coat |
| 73 | Applying Acrylic Emulsion Paint of approved make and brand on walls and celling sand papering in intermediate coats including putty.ii) Luxary Quality ( Two coats) |
| 74 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 75 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(b) On steel or other metal surface :With super gloss (hi-gloss) -(iv) Two coats (with any shade except white) |
| 76 | Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer-In-Charge. (Payment will be made on finished length of the work).(A) In 10-12 Micron thickness Annodizing film I) Natural white a) 2-track Sliding Window ii) Bottom Frame in 1200 mm x 1200 mm Window |
| 77 | ii) Top and side frame in 1000 mm X 1200 mm Window &ii) Top and side frame in 1200 mm X 1200 mm Window |
| 78 | b) 3-track Sliding Window ii) Bottom Frame in 1900 mm x 1200 mm Window &ii) Bottom Frame in 1800 mm x 1200 mm Window |
| 79 | ii) Top and side frame in 1900 mm X 1200 mm Window &ii) Top and side frame in 1800 mm X 1200 mm Window |
| 80 | d) Shutter for all track sliding window.i) Bottom & Top member. |
| 81 | ii) Style side member. |
| 82 | iii) Interlock member. |
| 83 | h) Louvered window.i) Top, bottom and side member |
| 84 | ii) Louvered Section. In Ventilators |
| 85 | iii) Cleat angle ( Non-annodized). In Ventilators |
| 86 | Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units:- (A) Glazed aluminium sliding windows made of extruded and annodized alloy aluminium sectios, fabrications, including cutting to proper shape and size, drilling and aligning of window shutter frame fitted with in built locking arrangements, sliding rollers and other necessary fittings, fixture, adhesives and joineries along with extruded neoprine or EPDM gasketing in between window frame and masonry work (walls, column, beam.lintels etc.) as well as between glass and shutter frame for fixing glass and Polysulphide sealant and in between shutter and window frame where necessary including cutting to requisite size and fixing glass as per drawing, specification and direction of EIC. The rate includes the hire charge of all tools and plants, including all incidental charges, adhesive, joineries such as screw, cleat angle etc. but excluding the cost of extruded aluminium sections, glass, neoprene / EPDM gasket, locking arrangement and rollers.i ) 2 track sliding window. |
| 87 | ii ) 3 /4 track sliding window. |
| 88 | v ) Louvered Window |
| 89 | Supplying PVC rollers for sliding windows as per direction of Engineer in charge. |
| 90 | Supplying maruti lock (100mm) |
| 91 | Supplying EPDM gusket of approved make and brand as per direction of Engineer in charge. i) For sliding windowsa) ' T' shaped EPDM gasket for frames |
| 92 | Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987. |
| 93 | Filling the gap in between aluminium frame & adjacent RCC / Brick/ Stone work by providing weather silicon sealant over 6mm dia backer rod of approved quality as per architectural drawings and direction of Engineer-in-Charge complete. Upto 5 mm depth and 5 mm width.ii) In First Floor |
| 94 | (e) Supplying ,fitting & fixing Eco-friendly, Water Resistance and Incombustable Calcium Silicate board/tiles (Density >900 Kg per Cu.m.) of approved design and brand finished with calcium silicate jointing compound to form a joint less false ceiling all complete as per drawing & direction of Engineer - in- Charge. False ceiling with (ii) 8mm thick square edged Calcium Silicate Board |
| 95 | Supplying fitting & fixing concealed False ceiling Framework with G.I. Section (perimeter channels having one flange of 20 mm. and another flange of 30 mm. with thickness of 0.55 mm. and web of length 27 mm., along the perimeter of the ceiling, screws fixed to the wall with help of nylon sleeves or PVC dash fastners @ 610 mm c/c. then suspend G.I. intermidiate 'C' section with web 90 mm. and flanges of 15 mm. each from soffit @ 1200 mm c/c with ceiling angle of size 25 mm. X 10 mm. X 0.55 mm. fixed to soffit G.I. Cleat and Steel expansion fasteners. Ceiling section of 0.55 mm. thickness having web of 51.5 mm. and two flanges of 26 mm. each with lips of 10.55 mm., are then fixed on to the intermediate channel with the help of connecting clips in the direction perpendicular to the intermidiate channel @ 610 mm c/c) with fully threaded fiber cement screws @ 300 mm c/c. all complete as per the drawing and direction of Engineer-in-Charge. Section specification :- Perimeter Channel :- 30 mm X 20 mm X 27 mm, thickness 0.55 mm (min), Intermidiate Channel :- 15 mm X 90 mm, thickness 0.90 mm (min), Ceiling Section :- 51.5 mm X 26 mm X 10.55 mm, thickness 0.55 mm (min), Ceiling Angle :- 25 mm X 10 mm, thickness 0.55 mm (min). |
| 96 | Supplying & laying as per IRC-SP:063-2004 paver unit of any shade of approved quality as per relevant IS code, laid in pattern as directed in pavement, footpath, driveway (paver block only), etc including necessary underlay complete in all respect with all labour and material. [Border concrete if necessary to be paid separately]. Note: Sub-grade CBR should not be less than 5. (c) Supplied and laying in the specified pattern of Interlocking Concrete Block Pavement (ICBP) with concrete blocks (with Concrete as specified as per Table-1 of IS :15658 : 2006) manufactured from BIS Licence Manufacturer, with spacer nib (Small protruding profiles on the vertical face of a Paver Block used as a device for keeping minimum joint gap between the Paving Blocks, as per Cl. No. 3.26 of IS 15658) and of specifed size and shape with aspect Ratio (The ratio of length to thickness of a Paver Block, as per Cl. No. 3.3 of IS 15658) as per Table - 2 of IS :15658 : 2006 with flexural strength / breaking load as per Annexure - G of IS 15658 on the prepared Base Course of specified CBR as per Table-1 of IRC SP 63 (2018) or else as mentioned in design and drawing with a cushing of compacted bedding sand of 25-35 mm thick (grading of the bedding sand as per Cl. No. 6.5.1 of IRC SP 63) and filling up the gaps in between Paver Blocks with joint filling sand (grading of the bedding sand as per Cl. No. 6.5.2 of IRC SP 63) and completing the edges with cut blocks as per Cl. No. 8.7 of IRC SP - 63 (2018) with proper confinement of bedding and joint filling sand, compacting, levelling and filling up the edge gap.60 mm thick (ii) Coloured Decorative |
| 97 | M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete. Payment to be made on the basis of calculated weight of structural memebrs of MS Holow Section as specified in relevent IS code in finished work. Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weight of finished structural members. The rates are considered for a hight of erection 8 m. / 2nd floor level from the ground. Add 1.5 % extra over the rate for each additional floor or 4m. beyond the initial 8 m. or part thereofFor roof truss worksa) Span up to 12 Mtr (Roof truss) |
| 98 | Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make as per IS: 15965: 2012 and IS: 14246: 2013 (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work). (i) In Roof:- |
| 99 | Galvanised iron sheet ridging fitted with necessary bolts, screws, washers etc complete.(225mm end lapping)(A) 300 mm lapping each way(b) With 0.63 mm sheet |
| 100 | Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. [excluding the cost of supporting frame work and teak wood batten/Lipping] (iv) 12mm |
| 101 | (vi) 19mm |
| 102 | Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle/MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-in charge.The rate includes the cost of labour, adhesive and all incidental charges thereof.Glossy/Matt/Suede excluding surface texture or metallic lustre.(i) Thickness of laminate 1.5mm |
| 103 | Partition of teak veneer [1 mm] as per design fitted and fixed complete (excluding the supporting frame work & necessary teak wood battens):(i) 4mm thick commercial quality |
| 104 | Polyurethane Polishing to woodwork with required colour as approved by Engineer-in-Charge with preparing surface including scaffolding and hire charges of compressor machine including cost of filler and hardener material such as P. U. Sealing, P. U. Top coat (Matt/Glossy), Thinner,Spirit etc. and inclusive of all operation, material and labour complete as per direction of Engineer-in- Charge. |
| 105 | Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987.xiii) 12mmthickcleared toughenedglass coforming to IS: 2553-1992 (Part-II) |
| 106 | SANITARY & PLUMBING WORKS |
| 107 | Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc.(b) With 'S' trap |
| 108 | Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc. |
| 109 | Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete.(a) E.W.C.(iv) Bestolite (solid type) white |
| 110 | Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint.(iii) 630 mm X 450 mm size |
| 111 | Supplying, fitting and fixing pedestal of approved make for wash basin (white) |
| 112 | Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete.(i) 635 mm X 395 mm X 420 mm |
| 113 | Supplying, fitting and fixing 18 mm thick marble partition slab with chawk doongri marbel square cut, both sides polished with two front corners rounded and edges polished. |
| 114 | Supplying, fitting and fixing shower of approved brand and make. (a) (i) Chromium plated round shower with revolving joint 100 mm dia with rubid cleaning system (Equivalent to Code No. 542(N) & Model - Tropical / Sumthing Special of ESSCO or similar brand). |
| 115 | Supplying, fitting and fixing bib cock or stop cock. (a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand). |
| 116 | (a) (ii) Chromium plated Bib Cock long body with wall flange with aerator (Equivalent to Code No. 512 & Model - Tropical / Sumthing Special of ESSCO or similar brand) |
| 117 | (b) (i) Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar |
| 118 | (b) (ii) Chromium plated Concealed Stop Cock (Equivalent to Code No. 514(A) & Model - Tropical / Sumthing Special of ESSCO or similar brand) |
| 119 | Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.(ii) 450 mm long |
| 120 | Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps.(iii) 900 mm long |
| 121 | Supplying, fitting and fixing complete Bottle waste trap (Heavy Quality) (a) Chromium plated Bottle trap 32 mm with 190 mm long connecting pipe and wall flange (Equivalent to Code No. 545 & Model - Tropical / Sumthing Special of ESSCO or similar brand). |
| 122 | Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges.(ii) 600 mm X 450 mm |
| 123 | Supplying, fitting and fixing glass shelf with aluminium guard rails.(a) Ordinary type with 5.5 mm sheet glass |
| 124 | Supplying, fitting and fixing liquid soap container.(a) Cromium plated. |
| 125 | Supplying, fitting and fixing towel rail with two brackets.(a) C.P. over brass(iii) 25 mm dia. and 750 mm long |
| 126 | Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only).(iv) 50 mm dia |
| 127 | (vi) 32 mm dia |
| 128 | (vii) 25 mm dia |
| 129 | Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. (a) For Exposed Work(ii) CPVC Pipes Class-2, SDR-13.525 mm Dia |
| 130 | 32 mm Dia |
| 131 | 50 mm Dia |
| 132 | (b) For Concealed Work(ii) CPVC Pipes Class-2, SDR-13.520 mm Dia |
| 133 | 25 mm Dia |
| 134 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (A) (i) Single Socketed 3 Meter Length(b) 110 mm |
| 135 | (ii) Double Socketed 3 Meter Length(b) 110 mm |
| 136 | (iii) Single Socketed 1.8 Meter Length(b) 110 mm |
| 137 | (iv) Double Socketed 1.8 Meter Length(b) 110 mm |
| 138 | (v) Double Socketed 1.2 Meter Length(b) 110 mm |
| 139 | (vi) Double Socketed 0.9 Meter Length(b) 110 mm |
| 140 | (vii) Double Socketed 0.60 Meter Length(b) 110 mm |
| 141 | (B) Fittings(ii) Plain Tee(b) 110 mm |
| 142 | (iii) Door Tee(b) 110 mm |
| 143 | v) Plain Y(b) 110 mm |
| 144 | x) Bend 87.5º(b) 110 mm |
| 145 | xii) Door Bend (LH) & (RH)(b) 110 mm |
| 146 | xiii) Cross Tee(b) 110 mm |
| 147 | Supplying, fitting and fixing pillar cock of approved makec) CP Pillar Cock - 15 mm. (Code No. 5011 & Model - FLORENTINE of JAQUAR or equivalent). |
| 148 | Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges.(ii) 600 mm X 450 mm |
| 149 | ELECTRICAL WORKS |
| 150 | Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed |
| 151 | Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting |
| 152 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :a) For 4 core upto 25 sqmm |
| 153 | b) For 4 core upto 16 sqmm |
| 154 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :a) 4 core 25 sqmm cable |
| 155 | b) 4 core 16 sqmm cable |
| 156 | Supplying and fixing double door Vertical TPN MCBDistribution board for MCCB incomer with IP-42/43protection, on angle iron frame on wall & mending goodthe damages to original finish incl. Inter connection withsuitable size of copper wire and neutral link & provisionfor earthing attachment (Legrand)Up to 160A4 way |
| 157 | Supplying and fixing double door Horizontal TPN MCBDistribution board with IP-42/43 protection, concealedin wall after cutting the wall & mending good thedamages to original finish incl. Inter connection withsuitable size of copper wire and neutral link & provisionfor earthing attachment (Legrand)a) 4 way |
| 158 | b) 6 way |
| 159 | Supplying and fixing double-door SPN MCB DistributionBoard with IP-42/43 protection, concealed in wall aftercutting the wall & mending good the damages tooriginal finish incl. Inter connection with suitable size ofcopper wire and neutral link & provision for earthingattachment. (Legrand)a) 2+8 way |
| 160 | b) 2+12 way |
| 161 | Supplying and fixing 240/415 V MCB of Breakingcapacity 10kA & C characteristics on din rail ofexisting DBs and necessary connection (Legrand)a) 63 A FP |
| 162 | b) 63 A TP |
| 163 | c) 40 A TP |
| 164 | d) 6-32 A DP |
| 165 | e) 6-32 A SP |
| 166 | Supplying and fixing 415 V Four Pole MCCB ofBreaking capacity 25kA/35kA with fixed thermaland fixed magnetic / adjustable thermal and fixedmagnetic setting in existing DBs / enclosure andnecessary connection (Legrand)100 A |
| 167 | Supplying and Drawing 1.1 KV single core stranded 'FR'PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as requireda) 3 x 22/0.3 (1.5 sqmm) |
| 168 | b) 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC |
| 169 | c) 2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC |
| 170 | Cutting Channel of size (40 mm x 40 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 19 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles19 mm dia 3 mm thick polythene pipe without earthcontinuity wire |
| 171 | Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board complete with 2 no. suitable size “Ph & N” copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish.[only PVC Rigid Conduit on ceiling and remaining portionconcealed]a)Average run 5 mtr |
| 172 | b)Average run 8 mtr |
| 173 | Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point incl. S&F 240 V 6A 3 pin Modular type plug socket & Modular type switch (Brand approved by EIC) incl. S&F earth continuity wire, fixed on 4 Module GI switch board with 3/4 Module top cover plate flushed in wall incl. mending good damages to original finish2x22/0.3 (Ph. & N) and 1x22/0.3 as ECCOn Board |
| 174 | Supply & Fixing 240 V, 6 A, 3 pin Modular type plugsocket (Brand approved by EIC) with 6A Modular typeswitch, without plug top on 4 Module GI Modular typeswitch board with 3 Module top cover plate flushed inwall incl. S&F switch board and cover plate and makingnecy. connections with PVC Cu wire and earth continuitywire etc. |
| 175 | Supply & Fixing 240 V, 16 A, 3 pin Modular type plugsocket (Brand approved by EIC) with 16A Modular typeswitch, without plug top on 4 Module GI Modular typeswitch board with top cover plate flushed in wall incl.S&F switch board and cover plate and making necy.connections with PVC Cu wire and earth continuity wireetc. |
| 176 | Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket with 20/25A Modular switch (Brand approved by EIC) type SP MCB (C-Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. |
| 177 | Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. |
| 178 | Supplying & Drawing 2-pair Telephone cables with highdensity polyethylene insulated solid annealed high conductivity bare copper of dia 0.5mm in prelaid PVC rigid conduit/ in polythene pipe embeded in wall. |
| 179 | Supply & Fixing Telephone socket (RJ11) Modular type(Brand approved by EIC) with PVC board and top coverplate on wall and making necessary connections &testing as required |
| 180 | Modular TV socket |
| 181 | Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works20mm size |
| 182 | Supplying & fixing medium gauge GI Pipe ( ISI-Medium)Protection with necessary fittings and jointing metarials asrequired50 mm dia Fixing only single/twin fluorescent light fitting complete with all accessories directly on wall/ceiling by screws etc. Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter:23 cm (9\\") 30 cm Exhaust fan (12\\") Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long)For Al23 cm Exhaust fan (9\\") 30 cm Exhaust fan (12\\") Excavation of soil for installation of Earth Electrode and filling & ramming. Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below:By ISI-Medium GI pipe Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe Extra for treatment of soil by using salt & charcoal or coke for plate electrode Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damagesSolid GI wireNo. 8 SWG |
| 183 | Sub Total |
| 184 | Add GST @18% . |
| 185 | Sub Total |
| 186 | Add labour welfare Cass @ 1% Please Enable Macros to View BoQ information |
