|
| 1 | Earthwork in excavation of foundation trenches or drains in all sorts of soil (including mixed soil but excluding laterite or sand stone ) including removing spreading or stacking the spoils within a lead of 75 metre as per direction.The items includes necessary trimming the sides of trenches, levelling , dressing & ramming the bottom , bailing out water as required complete. |
| 2 | Depth of excavation not exceeding 1500 mm |
| 3 | Earth work in filling in foundation trenches or plinth with goode earth , in layers not exceeding 150 mm. Including watering and ramming etc. layer by layer, complete. |
| 4 | With earth obtained from excavation of foundation. |
| 5 | Flling in foundation or plinth by Fine sand in layers not exceeding 150 mm as directed and consolidating same by through saturation with water and ramming complete including cost of sand. |
| 6 | By Fine sand . |
| 7 | Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand . |
| 8 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground flooras per relevant IS codes. [ Pakur variety] |
| 9 | 1:2:4 proportion. |
| 10 | Brick work with 1st class bricks in cement mortar (1:6) |
| 11 | In foundation and plinth |
| 12 | Ordinary cement concrete ( mix 1:1.5:3) with graded stone chips ( 20 mm nominal size) excluding shuttering & reinforcement if any.Pakur Variety Ground floor. |
| 13 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with rewuired bracing for concrete slabs, beams, columns, lintels, curved or straight including fitting , fixing and stricking out after completion of works. |
| 14 | 25 mm to 30 mm wooden shuttering |
| 15 | Upto Ground floor roof level |
| 16 | 25 mm to 30 mm shuttering without staging in foundation etc. |
| 17 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, strips binders etc. including supplying of roads, initial straightening and removal of loose rust (if necessary) cutting to requisite length hooking and bending etc. complete as per drawing and direction. |
| 18 | For M.S. / Tor steel. |
| 19 | Upto Ground floor roof level. |
| 20 | Plaster (to wall, floor, etc.) with sand and cement mortar including rounding off or chamfering corners, as directed and racking out joints roughening of concrete surface including chipping and application of cement slurry where necessary etc. complete. |
| 21 | With 6:1 cement mortar. |
| 22 | 20 mm thick plaster |
| 23 | In ground floor. |
| 24 | 10 mm thick plaster in (1:4)(Celing) |
| 25 | In ground floor. |
| 26 | Neat cement punning about 1.5 mm thick in wall , dado, window sills, floor, drain etc. |
| 27 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or concrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface thoroughly, complete as per manufacturer's specification and as per direction of the EIC. |
| 28 | One Coat |
| 29 | Ground floor |
| 30 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer |
| 31 | Two Coat Normal Acrylic Emulsion |
| 32 | Ground floor |
| 33 | Supplying and laying Polythene Sheet over damp proof course or below flooring or in foundation trenches |
| 34 | Supplying fitting and fixing UPVC pipes A type and fitting conforming to Is: 13592-1992 with all necessary clamps nails, including making holes in walls, floors etc. cutting trenches in any soil thorugh masonry concrete structure etc. .f necessary and mending good damages including jointing with jointing materials(Spun yarn,valamoid / bitumen / M.seal etc.) complete. |
| 35 | 110 mm diameter. |
| 36 | Supplying ,fitting and fixing UPVC fittings conforming to IS 13592-1992. |
| 37 | Plain Bend 110 mm |
| 38 | Shoe 110 mm dia |
| 39 | Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work). (i) In Roof:-. a) With 0.5 mm thick sheet |
| 40 | 0.65 mm thick |
| 41 | M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete. |
| 42 | Span upto 12 Mtr |
| 43 | Galvanised iron sheet eaves gutter fitted and fixed with necessary 50 mm X 6 mm M.S flat bar clamps bent to design, bolts, nuts, washers etc. complete. Eaves gutter made of 0.63 mm. sheets.(300mm End lapping) 225 mm. wide gutter |
| 44 | Priming one coat on steel or other metal surface with synthetic enamel/ oil bound primer of approved quality including smoothening surfaces by sand papering etc |
| 45 | On steel surface |
| 46 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary |
| 47 | On Steel surface / hi- gloss |
| 48 | Two coats (with any shade except white). |
| 49 | Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. |
| 50 | In ground floor. |
| 51 | 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement). Using grey cement |
| 52 | 25 mm. thick |
| 53 | Supplying fitting and fixing plaque made of Granite slabs ( single piece) of 15 mm to 18 mm thick with uniform texture and without decorative veins in facia etc fixing with using Cement slurry at back side of granite @4.4 kg/sq.m and white cement slurry for joint filling @1.8 kg/sq.m.including making lettering , sign marks etc as per direction in the granite slabs with fixed at brick wall (in 1:6) as directed including earth cutting , 75 mm thick sand filling , 75 mm thick Cement concrete (1:2:4) and plastering with 20 mm thick sand cement mortar (6:1) as specifed by the Department including wall putty , Acrylic primer & Super Protective 100% Acrylic Emulsion two coats including all incedential charges for labours , materials , machinaries & transportig charges complete in all respect as per direction of EIC. |
| 54 | Sub Total |
| 55 | Add GST @ 18% on Sub-Total Cost, i.e. |
| 56 | Add Labour Welfare Cess @ 1% on Total cost after GST, i.e. Please Enable Macros to View BoQ information |
