|
| 1 | Civil WorksExcavating in post holes (or similar holes) each not exceeding 0.5 cubic metre getting out soft/ disintegrated rock, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus rock to a distance not exceeding 50 m and making good surface etc. complete all as specified and as directed. |
| 2 | Material and labour for plain cement concrete 1:4:8, type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and as directed. |
| 3 | Material and labour for mild steel rolled joist, channel, angle or tee sections, fixed independently without connecting plates, cut to ordinary lengths i.e. within 20mm of the length indicated etc, conforming to Fe 410-W Grade, E-250 quality - A complete all as specified and as directed. |
| 4 | Supply and fix in rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates conforming to Fe 410-W (GradeE- 250) quality-A complete all as specified and as directed. |
| 5 | Supply and fix Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick as per approved profile of any colour having tensile strength of 550 Mpa as in roof covering/ on Chajjas, fixed with self tapping screws or L type or J type or cranked hook bolts or as per manufacture instruction complete all as specified and as directed by Engineer-in-Charge |
| 6 | Material and labour for surfaces of any description, over 10cm in width or girth, not otherwise described applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed. |
| 7 | Material and labour for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering doors, etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing conforming to Fe-410-W(Gde-E-250) quality-B complete all as directed by the Engineer-in-Charge.) quality A complete all as specified and directed |
| 8 | Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation, manholes etc., not exceeding 10 square metre on plan and getting out in soft/ disintegrated rock complete all as specified and as directed. |
| 9 | Material and labour for reinforced cement concrete (M-30 design mix) using 20mm graded aggregates as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete Complete all as specified and directed. |
| 10 | Material and labour for reinforced cement concrete (M-30 design mix) using 20mm graded aggregates as in columns, pillars, piers, posts, struts and the like complete all as specified and as directed. |
| 11 | Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter for rough finished concrete surfaces complete all as specified and as directed. |
| 12 | Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished concrete surfaces complete all as specified and as directed. |
| 13 | Material and labour TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 14 | All as per Item No 13.00 described here-in-before but6 to 10mm dia as in stirrups, sapcers and binders etc |
| 15 | Material and labour for precast cement concrete block masonry with solid blocks made out of plain cement concrete 1:3:6, type C-1 with using 20mm graded stone aggregate, exceeding 10cm in width and setting in cement mortar 1:6 etc. complete all as specified and as directed. |
| 16 | Material and labour for rendering 15mm thick in cement mortar 1:6 on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and as directed |
| 17 | Material and labour for preparation of newly plastered surface of wall and applying two coats of cement based paint over one coat of alkali resistant primer to match the surfaces complete all as specified and as directed. |
| 18 | Material and labour for Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed |
| 19 | Material and labour for 100mm thick plain cement concrete 1:4:8, type D-2, using 40mm graded stone aggregate as in sub base of flooring, finished even and fair etc. complete all as specified and as directed. |
| 20 | Material and labour for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 Grade with grey cement and pigment complete all as specified and as directed |
| 21 | Material and labour for Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars and like including 20mm thick screed bed in cement mortar 1:4 with pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc complete all as specified and directed. |
| 22 | Removing excavated surplus soft/ disintegrated rock not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed. |
| 23 | Returning filling in including spreading, levelling, watering and well ramming in layer not exceeding 25 cm thick for soft/ disintegrated rock complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 24 | Returning filling in including spreading, levelling, watering and well ramming in layer not exceeding 25 cm thick for soft/ disintegrated rock complete all as specified and as directed. Please Enable Macros to View BoQ information |
