|
| 1 | Electrical Items : |
| 2 | DISMANTLING AND DEMOLISHINGDemolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 3 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials away from the site etc complete as per ADA instructions. |
| 4 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete as per ADA instructions. And installation of 1 toilet door as per ADA instructions.Of area 3 sq. meters and below |
| 5 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing, false ceiling includingdisposl of unserviceable material and stacking of serviceable material within 50 meters lead as directed by Engineer-in-charge. |
| 6 | Dismantling of existing wooden Partition: Dismantling of 75mm thick wooden partition and door including glassand strengthening of the existing partition with additional supports and necessary hardwares, complete all as per sample available at ADA. |
| 7 | Re-assembling of existing wooden Partition: Re-assembling of 75mm thick wooden partition and door including strengthening of the existing partition with additional supports and necessary hardwares, complete all as per sample available at ADA. |
| 8 | Dismantling tile work in floors and roofs laid in cement mortar and disposing away from the site |
| 9 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by manual or mechanical means, including loading, transporting, unloading away from the site or as approved by Engineer-in-charge. |
| 10 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in Cement mortar 1:4 (1 cement :4 coarse sand). |
| 11 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete as per ADA instructions. |
| 12 | Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws with two rubber stopper etc complete as per ADA instructions. |
| 13 | Providing and fixing of Hydraulic door closer ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) of required colour and shade, with necessary screws etc complete as per ADA instructions. |
| 14 | Providing and fixing of Tower bolt ISI marked, of required colour and shade, with necessary screws with two rubber stopper etc complete as per ADA instructions. |
| 15 | FLOORINGProviding and laying vitrified floor tiles of size 600x600 mm with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colors and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc complete as per ADA instructions. |
| 16 | FINISHING12 mm cement plaster of mix for Internal plastering with 1:4 (1 cement: 4 fine sand)etc complete as per ADA instructions. |
| 17 | PAINTING WORKS : New worksApplying one coat of water thinnable cement primer of approved brand and manufacture on wall surface with Water thinnable cement primer etc complete as per ADA instructions. |
| 18 | Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives. |
| 19 | French spirit polishing of approved shade with two or more coats including a coat of wood filler etc complete as per ADA instructions. |
| 20 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 21 | Providing and fixing mirror of superior glass (of approved quality) of rectangular shape 1500x450 mm with plastic moulded frame of approved make and shade with 6 mm thick hard board backing including all accessories etc complete as per ADA instructions. |
| 22 | Providing and fixing of White Vitreous China Wash basin size 550x400 mm with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require etc complete as per ADA instructions. |
| 23 | Providing and fixing 100 mm sand cast Iron grating for gully trap. |
| 24 | Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres),including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. |
| 25 | Providing and fixing SS towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour with 600 mm long towel rail with total length of 645 mm, width78 mm and effective height of 88 mm, weighing not less than 190 gms including all accessories etc complete as per ADA instructions. |
| 26 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge etc complete as per ADA instructions. |
| 27 | Providing and fixing brass stop cock of approved quality with 15 mm nominal bore including all accessories etc complete as per ADA instructions. |
| 28 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 with 15 mm nominal bore including all accessories etc complete as per ADA instructions. |
| 29 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms including all accessories etc complete as per ADA instructions. |
| 30 | P/FPVC Multitrap (floortrap ) of approvedqualityandmake and confirming to ISI specificationsincluding construction ofCC : 1:2:4as directedby Engineer-in – charge |
| 31 | Providing and Fixing C.P health fauset of approved quality conforming to IS:8931. 15mm nominal bore ( jaquar make cat no : ALD -CHR-573)as directed by engineer in charge. |
| 32 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer\"s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) |
| 33 | Providing, fabricating and installation of MS frame structure using I section, Hallow, angle sections and suitable anchoring nuts and HILTI Bolts of ISI make incl civil work grouting to First floor, scaffolding required for erection of structure, curing, etc, 5mm Aluminum chequered sheet for finishing level complete. All other details as per Drawing attached. |
| 34 | Providing and laying in position specified grade of reinforcement cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement.1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate) |
| 35 | Steel reinforcement for R.C.C. work including straightening, cutting, Bending, placing in position and binding all complete up to plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 36 | Providing, fabrication and installation of Vista or Finesta or Hunter Douglus make Manual operated Roller Blinds, Translucent lighter shade fabric incl removal existing blinds, accessories, all as per OEM specification, etc complete. |
| 37 | Providing, fabricating & installation of wall mounted wooden storage units of depth 450 mm, made out of 18mm thick ply wood, external surface finish with 01mm thick laminate and all exposed side finish with teakwood beading, internal surface finished with 0.80 mm laminate, with standard hardware’s such as lock, C type PC handles, piano hinges, skirting, locking arrangement, etc. complete neat and attractive finish, including transportation, shifting, labor etc,. And as per sample available at ADA. |
| 38 | Providing and applying two component high performance polymer modified cementitious waterproofing, Fosroc Nitocoat CM 210 or equivalent having minimum parameter \"(a) Resistance to positive water pressure bar(DIN 1048)Pt 5: 5 (50 m head of water).(b) Resistance to negative water pressure (ITM / FTM-181): 3 bar (30 m head of water).(c) Static crack accommodation: 0.9mm.(d) Abrasion resistance (ASTM D4060): Wear Index (equivalent to 40 N conc).(e) CO diffusion resistance (Taywood method) :> 50 m - after 5,000 hrs QUV2.(f) BS 6920: 1990 Effect on Water Quality.(g) Water Byelaws Scheme approved, product listing No. 0510522.(h) DIN 1048: Water Penetration Test.(i) Fire Tested to BS 476: 1987 Parts f and g. The system includes base preparation of cleaning, brushing and removal of flakyMaterials, grouting the porous area with cementitious grout, proper coving between slab and wall junctions and applying Fosroc Nitocoat CM210 in two coats with total Consumption @ 3.8kg/M2. Coating shall be done on the Entire horizontal surface and vertical surface. |
| 39 | Provision of wooden pedestal/table of size 1200 x 1200 x 450mm made out of 25mm thick ply table top and understructure made out of 25mm ply with approved shade laminate incl all materal, labor and tools,.etc all complete as per Engineer in charge. |
| 40 | Providing and fixing factory made uPVC white color casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be madeCasement cum fixed panel window having both end single casement panel, middle fixed panels and at top completely fixed ventilator with S.S friction hinges (350 x 19 x 1.9) made of (big series) frame 67 x 60 mm , sash 67 x 80 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 3.00 sqm up to 5.00 sqm). |
| 41 | ELECTRICAL WORKS:Supply, Installation & Commissioning of 2x2 feet LED Fittings for False Ceiling 36watt,Cool White light (6500k) & up to 4kv surge protection including 3 core PVC insulating Copper flexible wire connection on existing light pointetc.,with all respects Make Wipro/Philips/Crompton |
| 42 | Supply & laying of Sub main wiring with PVC insulated FRstranded copper conductor of size 2.5 Sq mm x 2 runs + 1 run of 1.5 sq mm for earth wire in 25mm dia PVC casing N capping / conduit pipe complete with all fixing accessorieslike elbow, bent, tee etc complete.(UPS POWER CIRCUIT) |
| 43 | Supply & drawing ofSub – Circuit 2 runs of 1.5 Sq.mm FRLSPVC insulated copper conductor, single core cable in the existing surface/recessed steel/PVC conduit as required.(For lighting points) |
| 44 | Lighting point wiring, the point wiring includes 20 mm thick PVC conduit pipe in ceiling/ wall concealed type, for main circuit 2.5 sq mm multi stand copper wire, for control wire 1.5 sq mm including switch, hylem plate, modular boxes etc., complete in all respect. |
| 45 | Supply & installation of 5/15A Power socket outlet controlled by 20A single pole switch with indicator housed in PVC boxes, Fitted at sitting desk as required by client (3 modular box for RAW Power Points) |
| 46 | Supply & installation of 5/15A Power socket outlet controlled by 20A single pole switch with indicator housed in PVC boxes and dummy platesFitted at sitting desk as required by client (8 modular box white colour for UPS Power Points) |
| 47 | Supply, Alteration, fixing & Commissioning of existing LDB with5 No’s of 6Amps 1 way switches, 1 No’s indicator and 1 No 5/15Amps socket including 12 modulor hylum plate ,PVC frame and all respects |
| 48 | Supply, Installation & Commissioning of 1x1 feet LED Fittings for True Ceiling 20watt,Cool White light (6500k) & up to 4kv surge protection including 3 core PVC insulating Copper flexible wire connection on existing light pointetc.,with all respects Make Wipro/Philips/Crompton |
| 49 | NETWORK SYSTEMSupply and installation of 24 Port 100/1000 Managed switch with 4 combo SFP slots( 24 RJ-45 10/100/1G Base T, 2xSFP(1G) and 4xSFP+ (1G/10G) uplink/ stacking ports) |
| 50 | Supply and installation of CAT6 UTP 24AWG Patch cord 1 meters. Plug 30U Snagless |
| 51 | Supply and installation of CAT6 UTP 24AWG Patch cord 2meters. Plug 30U Snagless |
| 52 | Supply and installation of Ethernet cable CAT6E UTP 23AWG |
| 53 | Supply and installation of 24Port Cat6 UTP Patch Panel Fully Loaded |
| 54 | Supply and installation of IO/Kye stone |
| 55 | Supply and installation of 24-slot Cables manager |
| 56 | Supply and installation of PVC Conduit pipe with accessories |
| 57 | Supply and installation of CAT6 Dual IO/ Face plate |
| 58 | Supply and installation of CAT6 4*4 IO/ Back Box |
| 59 | Supply and installation of Jackpanel |
| 60 | Installation & Configuration |
| 61 | FURNITURE WORKS:Sc ‘G’ TableDesking -Premium suit model of size 210*210*75 cm (Main Table +ELU+PED).Primary Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Soft closing access flap with in-build power box are provided on work surface for wire managementSecondary Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top.Modesty Panel Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top.Under structure Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Integrated Pedestal Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming toIS-14587:1998 with 0.4mm PVC membrane pressed on to topPedestal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metalPanel Drawer Slides. Drawer extension is 325 MM.Drawers have a soft closing & anti slam mechanism.Handles are provided for ease of opening.Pedestals are provided with lock for security.Brands: Godrej/Featherlite/Durian/Damro/Wipro |
| 62 | Sc ‘G’Back unitBack unit-Premium suite model of size 165cm (Back unit)The Back unit size shall be of : 1850 Width mm x 560 Depth mm x 670 Height mm. The door shall be 23 mm thick ( 18 mm thick Batons + 4 mm Veneer + 1 mm Backing Decorated ( BDL) ) . The Shelves and Partitions should be of 18 mm thick MDF (Medium density fiber) + Pigmented Black and coated with Melamine.Top Panel-Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Slide Door Unit-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping for body panels like side, bottom, back and shelves.Shutters are made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Shutters have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Storage is provided with lock for security. Display/Storage Unit-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping for body panels like side, back and shelves. Doors are made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on top.Top panel of display unit Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. |
| 63 | Supply & Installation of High Back revolving chair. Overall Dimensions of Chair-Seat Height - min 49.9 to max 58.9 cm. Total Height - min 134.9 to 143.9 cm. Width & Depth of Chair as measured from pedestal - Width 77 cm and Depth 77 cm• Seat/back assembly: The seat should be made up of 1.2 ± 0.1cm. Thick hot-pressed plywood and upholstered with leather and moulded polyurethane foam. The back foam should be designed with contoured lumber support for extra comfort.back size:53.0cm.(w) x 95.4cm.(h) seat size:54.6cm.(w) x 49.0cm.(d) the hr polyurethane foam should be moulded with density = 45 +/-2 kg/m³ and hardness load 16 ± 2 kgf for 25% compression the seat and back should be arrested together with spine made of 0.8 ±0.05 cm thkhr steel and should be black powder-coated (dft 40-60 microns) Armrest assay: the armrest assy. should comprise of three parts viz. the armrest support tube and p.u. armrest and the armrest top. The armrest tube assy. should be made of 2.54±0.03cm x 0.16±0.0128cm m.s.e.r.w. support tubes and chrome plated. The p.u. armrest should be made of black integral skin polyurethane with 50-70 shore hardness and reinforced with m.s. insert. the armrest top should be made of abs & upholstered with foam & leather The mechanism should be designed with the following features: * 360° revolving type, * seat back tilting ratio of 1 : 1.5* Front pivot for tilt with feet resting on ground ensuring more comfort, * tilt tension adjustment.* 5-position locking with anti-shock back mechanism, which prevents the backrest from impacting the user when the lock should be released* Static seat depth adjustment = 5.0 ± 0.5cm with 5 position locking. it has an adjustment stroke of 9.0 ± 0.3cm the bellow should be 1 piece and blow moulded in black polypropylene the pedestal should be made of die-cast aluminum with buffing finish. it should be fitted with 5nos. twin wheel castor. the pedestal should be 67.0 ± 0.5cm pitch-centre dia. (77.0 ± 1.0cm with castors) the twin wheel castors should be injection moulded in black nylon. |
| 64 | Supply& installation Mid Back revolving chair without Tilting Mechanism. The seat should be made up of 1.2 ± 0.1cm. Thick hot pressed plywood and upholstered with leather and moulded polyurethane foam. The back foam should be designed with contoured lumber support for extra comfort. Back size:53.0cm.(w) x 73.0cm.(h) seat size:54.6cm.(w) x 49.0cm.(d)thehr polyurethane foam should bemoulded with density = 45 +/-2 kg/m³ and hardness load 16 ± 2 kgffor 25% compression the seat and back should bearrested together with spine made of 0.8 ±0.05 cm thkhr steel and should beblack powder-coated ( dft 40-60 microns )the armrest assy. should comprise of three parts viz. the armrest support tube and p.u. armrest and the armrest top. The armrest tube assy. should be made of 2.54±0.03cm x 0.16±0.0128cm m.s.e.r.w. support tubes and chrome plated. The p.u. armrest should be made of black integral skin polyurethane with 50-70 shore hardness and reinforced with m.s. insert. The armrest top should be made of abs & upholstered with foam & leather the seat base assy. should be designed with following features: 360° revolving type without back tilt. It has an adjustment stroke of 12.0 ± 0.3cm the bellow should be 3 piece telescopic types and injection moulded in black polypropylene the pedestal should be made of die-cast aluminum with buffing finish. it should be fitted with 5nos. twin wheel castor. the pedestal should be67.0 ± 0.5cm pitch-centre dia. (77.0 ± 1.0cm with castors) the twin wheel castors should beinjection moulded in black nylon.Overall Dimensions of ChairSeat Height - min 43.4 to max 55.4 cm. Back Height - min 99.4 to 111.4 cm. |
| 65 | Sc ‘E’TableDesking -Premium suit model of size 165*180*75 cm (Main Table +ELU+PED).Supply of ‘L’ shaped Table of size shall be 1650mm(L) x 750mm(D) and Return Table 1200mm(L) x 450mm(D) with one side attached Frame of Fabric Magnetic and White board. Work top shall be made up of 25mm thick prelaminated particle board interior grade (As per IS: 12823). Bottom shall have a backing laminate ofminimum 0.6mm thickness. All the edges of work surface shall be provided with machine pressed 2mm thick PVC Edge band with glue of standard quality. The single side legs shall be used for supporting panels & work surface onone side only. Single side legs shall be fabricated by CO2weldinginMSTubeofsection38mmx25mm(IS:7138 ERWTube)withthebaseplateoftheMSplateof 35x22x5mm (IS: 2062, 5 mm HR) over whichan M8 Leveler shallbe fitted, which shall allow for adjustment of the height by50mmandthisshallbecoatedwithminimum45micronthicknessofepoxypowdercoating.BodyPanelStructure: uprights and horizontals shall be made of aluminum extrusion having material AL96063-T6 or equivalent and shall have an average wall thickness of 1.2 mm and also powder coated with epoxy-polyester powder. Fabricated bottom frame for 52.4mm shall be comprisesofL-Channels and it shall be made of 2mm thick CRCA steel (IS:513), formed plates of 3mm thick HR steel (IS:2062) & ERW steel tube of size 35x15x1.6mm in oval cross section (IS:7138) welded together. This shall be coated withaverage50to60micronthicknessofepoxypowdercoating.The52.4mmpanelhasmoreelaborateandflexible construction offering various functional and decorative finishes as well as cable management capacity. |
| 66 | HB Chair for Sc ‘E’Chair: large seat Depth + cross headrestSEAT/BACK ASSEMBLY: The seat is made up of 1.2 * 0 fern thk hot pressed plywood measured as per QA method described in OCP-QLTA-PL14-18 The Back is made up of injection moulded glass filled nylon & upholstered using Micro mesh fabric with high tenacity yarn with 28 density foam Sandwich in lumbar area.* SEAT SIZE(Larger Seat Depth) : 47.0 cm. (W) x 51.5 cm (D)* SEAT SIZE(StandardSeat Depth) 47 0 cm. (W) x 49.5 cm. (D) ” BACK SIZE : 45.0 cm. ”(W) x 65.3 cm. (M)HIGH RESILIENCE (HR) POLYURETHANE FOAM The HR poly methane seat foam is moulded with density 45+/-2 kg/m\"\" and hardness 16 + 2 kgf as per IS:7888 for 25% compression.ARMRESTS: The adjustable armrest is designed with the following features» Up-Down adjustment— 8 steps (8.0+0.Scm range)• Height adjustable armrest structure which is Powder Coated & fitted with an armrest top.• Fixed Armrest Top is PU moulded over metal insert.LUMBAR SUPPORT ASSEMBLY: The Lumbar support consists of polypropylene pad The Height of Lumbar pad can be adjusted through two projecting knobs provided on the rear side of the pad Lumbar pad has an adjustment of 8 0 + 0.5 cm in height. FRONT PIVOT SY!’JCHRO MECHANISM: The adjustable tilting mechanism is designed with the following features. |
| 67 | MB Chair for Sc ‘E’Supply of Mid Back Chair of size shall be: SEAT SIZE (Larger Seat Depth): 47.00cm (W) x 51.50cm (D), SEAT SIZE (Standard Seat Depth) 47.00cm. (W) x 49.50cm.(D), BACK SIZE: 45.00 cm(W) x 65.3cm(H). The seat shall be made up of 1.2 + 0.1cm thick hot-pressed plywood. The Back shall be made up of injection moulded glass filled nylon & upholstered using Mesh fabric with high tenacity yarn.HIGH RESILIENCE (HR) POLYURETHANE FOAM:The HR polyurethane seat foam shall be moulded with density 45+/-2 kg/cum and hardness 16 + 2 kgfasperIS:7888for 25% compression. ARMRESTS: The adjustable armrest shall be designed with the following features: Up-Down adjustment— 8 steps (8 0+0.Scm range). Height adjustable armrest structure which shall be powder coated & fitted with an armrest top. Fixed Armrest Top shall be PU moulded over metal insert. LUMBAR SUPPORT ASSEMBLY: The Lumbar support consists of polypropylene pad with moulded polyurethane foam & covered with polyester fabric. The Height of Lumbar pad can be adjusted through two projecting knobs provided on the rear side. Lumbar pad shall be an adjustment of 8.0 + 0.5 cm in height. |
| 68 | Providing, fabrication and installation of computer table of size approximately 1200 x 600 x 750 mm, made out of 18mm thick MDF Board and edges finish with 0.5 mm thick solid edge banding, exposed edges finished with 02 mm thick PVC edge banding including keyboard tray, handle, 02 nos wire manager, Foot rest etc including transportation, loading and unloading. |
| 69 | Providing & fixing of modular \"L\" Type customized modular work station of size 1750mm (L) x 600mm (W) x 750mm (H) each, the table top made out of 25mm thick pre-laminated particle board with PVC edge, the under structure made out of 25mm thick Pre-laminated particle board, Cable manager to be provided on the work surface and accessed through grommet cut out on the worktop, incl vertical movements of wires including Keyboard tray and CPU Trolly. Partition should be 75mm thick, made out of PLB either side, one number white board per person rest fabric magnetic, all bottom tile metal powder coated, partition height 1.20 m height with cable race ways at two level for drawing power / data / voice cable, height adjustable fixtures as per existing arrangement / shade. Stability of the structure individually and totally will be the responsibility of the vendor. All as per OEMs specification and sample available at ADA.The work includes provision of 03 Drawer Mobile pedestal of size 390mm (L) x 435mm (W) x 646mm (H) (Box + Box + File) all as per OEM Specification and sample available at ADA. |
| 70 | 6 seater rectangular meeting table (210 x 115 x 74) in cm Work top--Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Soft closing dual access flap provided for access to power supply and data cables.Under structure-The Under-structure consists of mixture of 25mm and 18mm Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Anodised aluminium alloy 63400 - WP profile is added at bottom edges for improving the aesthetics. The product has a knock-down construction.Wire Management-A wire raiser made of 0.8mm CRCA MS IS: 513. It is epoxy polyester powder coated (DFT 40-60 microns) for flow of wires and cables. A Power box with 2 cutouts on either side for standard 8 modules Anchor Roma is provided. Beside each cutout, an additional cutout with plate is provided for mounting Audio Visual Cables (eg. HDMI, VGA-A, etc). |
| 71 | Conference chairsCharges towards supply of Mid back chair for office meeting room chair. The knee tilt multi lock mechanism makes you feel like you are sitting on a cushion of air as it creates a smooth and balanced feel as you move from one position to the next Push the left-side lever up/down to unlock/lock reclining at multiple positions Seat:Depth- 45 cm, Width- 51 cm Dimensions: Width- 59 cm, Depth- 53 cmMinimum Height- HB: 112 cm; MB: 100 cmMaximum Height- HB: 107 cm; MB: 91 cmMinimum Seat Height- 52 cmMaximum Seat Height- 59 cmWidth (Arm to Arm)- 52 cmArm Rest Height- 23 cm |
