|
| 1 | Taking down chowkhats or frames with shutter (without taking off shutter from the frame)exe 1.50but n. exc. 4sqm in each complete all as specified & directed. |
| 2 | Taking down chowkhats or frames with shutter (without taking off shutter from the frame) n. exe 1.50 sqm in each complete all as specified & directed. |
| 3 | S&F Factory made single extruded WPC (WoodPolymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applyingPVC solvent cement and screwed with fullbody threaded star headed SS screwshaving minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules ofelasticity 900 N/mm2 and resistance tospread of flame of Class A category withproperty of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia andlength complete as per direction ofEngineer-in-Charge. (M.S. hold fast/ lugsor SS dash fasteners shall be paid forseparately).Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e. depth and width of profile shall beacceptable. Variation in profile dimensionson plus side shall be acceptable but no extrapayment on this account shall be made complete all as specified and directed. |
| 4 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) complete all as specified and directed. |
| 5 | S&F Factory made solid panel PVC wire gauzed door shutter30 mm thick (style) consisting of framemade out of M.S. tubes for top & bottomrails. M.S. frame shall be covered with heatmoulded plain colour PVC ‘C’ channelhaving a PVC sheet strip of 20mm widthstuck inside with solvent cement for stilesand plain colour PVC sheets for top rail,lock rail & bottom rail on either side & asgap insert for top rail & bottom rail; but wire gauzed i.e. panel will be of wire gauze in lieu ofPVC sheet panel. The wire gauze shallbe wrapped on an additional square8mm M.S. Solid tube and this tube shallbe welded to M.S. tubes. The wire gaugeshall be stretched to tighten firmly complete all as specified and directed. |
| 6 | M&L for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 7 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 8 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etccomplete all as specified and directed |
| 9 | M&L for 25 mm thick PCC (1:2:4)type B0 using 12.5 mm graded stone aggt as in floors finished even and fair without using extra cement, complete all as specified and directed. |
| 10 | S&F roof trusses (framed), trussed, purlins, crane fantries, rails and fastenings and heavy bracket fraking (Beam, tee, angle, using steel confirming to Fe 290 (Gde E-162)channel or flat sections) including distance pieces, cleats etc complete all as specified and directed. |
| 11 | S&F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 incljuding fabrication etc. |
| 12 | M&L for 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 13 | Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and as directed. |
| 14 | S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed. |
| 15 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end screwed the other, or screwed both to be fitted with washers and one hexagonal or square nut, not exc 5 cm long coomplete all as specified and directed. |
| 16 | M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying twocoatsof synthetic enamel paint over acoat of red oxide primer complete all as specified and directed by Engr-in- charge. |
| 17 | S&F3 mm thick sheet glass ordinary quality and glazing with oil putty in squareexc 0.5 sqm each pane complete all as specified and directed. |
| 18 | S&Fstainlesssteel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 19 | M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying twocoatsof synthetic enamel paint over acoat of red oxide primer complete all as specified and directed. |
| 20 | S&F powder coating Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified including powder coating of minimum 50 micron thickness complete all as specified and directed. |
| 21 | S&F Powder coating anodised aluminium window and ventilator shutters, side hung type without sash,aluminium sectiion weighihg 0.55 Kg/m including necessary jointing cleats, glazing clips, rubber e packing, anodised handles 2 nos in each door, hinges, anodised aluminium snap beading screws etc, complete all as specified and directed. |
| 22 | Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed. |
| 23 | S&F 100 mm size, butt hinges, extruded medium weight cold rolled mild steeletc complete all as specified and directed. |
| 24 | S&F 150mm size, aluminium anodised handle,fabricated type complete all as specified and directed. |
| 25 | M&L 150 mm long mild steel, barrel tower bolts of extruded section etc complete complete all as specified and directed. |
| 26 | S&F Mild steel sliding door bolts,250mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 27 | S&F in repairs 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 28 | Dismantling of plain or corrugated roof steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 29 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with L-type or J-type or cranked hook bolts in lieu of screw complete all as specified and directed. |
| 30 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ as in ridge, fixed with L-type or J-type or cranked hook bolts in lieu of screw complete all as specified and directed. |
| 31 | M&L for preparation of old wooden surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 32 | M&L for preparation of old steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 33 | Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 34 | M&L for PCC 1:3:6 type C-2 (50 mm) thick ( 40mm graded aggregate) thick as in plinth protection/Hard standing , etc finishing cement concrete surface even & fair whthout using extra cementmaking joints with bitumastic filling in proportion of bitumen and sand 1:2 complete all as specified and directed. |
| 35 | M&L for PCC 1:3:6 type C-2 (75 mm) thick ( 40mm graded aggregate) thick as in plinth protection/Hard standing , etc finishing cement concrete surface even & fair whthout using extra cementmaking joints with bitumastic filling in proportion of bitumen and sand 1:2 complete all as specified and directed. |
| 36 | M&L for PCC 1:3:6 type D-2 (100 mm) thick ( 40mm graded aggregate) thick as in plinth protection/Hard standing , etc finishing cement concrete surface even & fair whthout using extra cementmaking joints with bitumastic filling in proportion of bitumen and sand 1:2 complete all as specified and directed. |
| 37 | M&L for machine pressed concrete coloured and polished interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 Grade with grey cement and pigment. |
| 38 | M&L for prepolished, chequered cement concrete tiles of size 20cmx20cmx25mm thick, as in floors etc, over and including 15 mm thick screed bed or bedding layer in cement mortar (1:6) and set and jointed in neat cement slurry and pointed in grey cement and pigments to match with the shade of tiles complete all as specified and as directed. |
| 39 | M&L for form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. rough finished flat surface of concrete complete all as specified and as directed. |
| 40 | M&L for RCC (1:2:4) (nominal mix) type B1 (20 mm graded aggregate) in Beams, cantilevers, bressummer, lintels over 1.5 span complete all as specified and directed. |
| 41 | M&L for colouredthick glazed ceramic tiles 450x350x7-8 mm on vertical surfaces such as skirting, dado and risers to steps etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over and including 10mm thickbacking coat in cement mortar (1:4) , complete all as specified and directed. |
| 42 | M&Lfor 20 mm thick granite (of any type) work (table rubbed and polished) in steps, Jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 20mm thick screed bedin cement mortar (1:4) complete all as specified and directed. |
| 43 | M&L forsand filling under floors in layers n.exc 15 cm thick,spred,level and rammed including watering and consolidationcomplete all as specified and directed. |
| 44 | M&L for broken stone bolder as hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick,wateredand rammed to a true surfacecomplete all as specified and directed. |
| 45 | Dismantling wall and celling board (fibre, pulp, insulation etc) any thickness including cover fillets complete all as specified and directed. |
| 46 | M&L for 100mm thick PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in sub base of flooringcomplete all as specified and directed. |
| 47 | M&L for 75mm thick PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in sub base of flooringcomplete all as specified and directed. |
| 48 | S&F 605x605mm Anodised aluminium snap grid frame work for false ceiliong all as speecified. |
| 49 | S&F Hangers 6mm dia G.I (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilinhg cleats made out of G.I. flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified. |
| 50 | M&L for 6mm thickhigh pressutre, oceanic pre-primed, self embossed, non-asbestos fibrecement decorative board , water, termite and fire resistant for insulatrion and acoustic piurpose fixed or laiod/inserted to timber/GI/Aluminium framework with screws complete all as specified and as directed. |
| 51 | Dismantling floor, hearth or wall tiling including cement mortar bedding (dut not backing), removing rubish of the premises complete all as specified and as directed. |
| 52 | M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles all as specified and directed. |
| 53 | M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding0.18 sqm but notexceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles all as specified and directed. |
| 54 | M&L for Pre-cast (Factory casted) cement concrete Kerb stone casted in PCC (1:2:4) Type B-1 using 20mm graded stone aggregates with plan or interlocking joints (as directed)with solid blocks, exc. 10 cm in width and setting and jointedin cement mortar 1:6, complete all as specified & directed. |
| 55 | M&L screed bed 10mm thick in cement mortar (1:3) on fair faces of brick work or concrete surfaces as in vertical surfaces for laying tiles as directed. |
| 56 | M&L 15 mm thick, screed bed or bedding layer of cement mortar 1:4,for laying floor finishes as directed. |
| 57 | M&L for Kota stone slab 20-25mm thick in floor laid over and including 20 mm thick screed bed or bedding layer of cement morter (1:6)and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing all as specified and directed. |
| 58 | S&FAluminium Door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed complete all as specified and directed. |
| 59 | Dismantlingtimber scantlings 40 Sq. cm and over in section and in any position in unframed work as directed. |
| 60 | M&L 2nd class hardwood, scantlings, wrought, timber fixed, complete as specified and directed. |
| 61 | Dismantling of timber fillets, rails, posts, rafters, purlins etc under 40 sqcm in section as directed. |
| 62 | S&F Second class hard wood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails, cross sectional area exc 6and n.exc 13 Sqcm as specified and directed. |
| 63 | M & L preparing new wood & wood based surfaces of any descriptions but not exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primercomplete as specified. |
| 64 | Dismantling water tanks and removing to store Exc 500 & n.exc 1000 Ltrs complete all as specified and directed. |
| 65 | S&F Rotational moulded polyethylene water storage tanks 1000 Ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed. |
| 66 | S&F 15mm bore ball brass valves high pressure, with polythene float & fly nuts complete, screwed for iron pipe or brass ferrulecomplete all as specified and directed. |
| 67 | S&F 20mm bore ball brass valves high pressure, with polythene float & fly nuts complete, screwed for iron pipe or brass ferrulecomplete all as specified and directed. |
| 68 | M&L for TMT bars 10 mm dia and over, as in-reinforcement for concrete cut to length, bent to shape required including cranking, bending, spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and directed. |
| 69 | M&L for TMT bars 6 to 8 mm dia , as in-reinforcement for concrete cut to length, bent to shape required including cranking, bending, spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and directed. |
| 70 | S&F 15mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 71 | S&F 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 72 | Demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing complete all as specified and directed. |
| 73 | Demolition of brick work built in cement mortercomplete all as specified and directed. |
| 74 | M&L for brickwork with flyashbricks, straight or curved on plan to any radius inhalf brick thick walls, built in built in CM 1:4 complete all as specified and directed. |
| 75 | M&L for brick work with subclass \"B\" bricks well burnt straight or curved on plan exc 6 m mean radious, built in CM (1:6) complete all as specified and directed. |
| 76 | M&L for brick work with sub class \"B\" well burnt clay bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed. |
| 77 | Taking down cement plaster on brick or stone or concrete surfaces of wall etc ,icluding raking out joints , hacking for key, scrubbing down with wateretc complete all as specified and directed. |
| 78 | M&L for rendering 10mm thick on fair face of brick worksor concretesurfaces of wallswith CM (1:4) anf finished even and smoothwithout using extra cement complete all as specified and directed. |
| 79 | M&L for rendering 15mm thick on other than fair face of brick worksor concretesurfaces of wallswith CM (1:6) and finished even and smoothwithout using extra cement complete all as specified and directed. |
| 80 | Supply only liquid Water Proofing Compound ISI marked of approved make complete all as specified and directed. |
| 81 | M&L for applying three coats of white wash on new Wall surfaces including preparation of surface, complete all as specified and directed. |
| 82 | M&L for preparation of new plastered surfaces of walls and applying two coats of cement based paint over a coat of cement primer on wall complete all specified and directed. |
| 83 | M&L for preparation newly plaster surfaces of wall, chajja facia etc with putty 1-2mm thick and applying two coats of 100%premium Acrylic emulsion paint having VOC less than 50 gm/litre and UV resistant as per IS-15489=2004 alkali and fungal resistant exterior paint of required shed (company depot limited)with silicon additives 1/43 litres/10 Sqm over and including primer applied 0.90 litres/.10 sqm over new surfaces using Airless spray technology with maximum working pressure of 3300 PSI and capable of operating single spray gun with a maximum material hose length of 30 Mtr, the spray machine whould be of reputed manufacturer with pro guaeds technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and acessories complete all as specified and directed. |
| 84 | M&L for Complete removal of existing treatment and treating from walls and applying 1-2mm thick wall putty and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new plastered surface even and smooth complete all as specified and directed |
| 85 | M&L for preparing of new plastered surfaces of walls &applying plaster of paris puttyof 1 mm thickness over plastered surface toprepare the surface even and smooth etc and applying two coats of oil bound distemper etc complete all as specified and directed. |
| 86 | M&L for cement concrete Type B1 (1:2:4) 20mm graded stone aggregate plinth courses, string courses, lacing courses, parapets andrailings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not providedfor in Item 04028, watertroughs and the like includingweathering,slightly roundedor chamfered angles andthroating, complete all as specified and directed. |
| 87 | S & F 15 mm bore Bip taps, Chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferruleand fixed complete all as specified and directed. |
| 88 | M&L for drilling and tapping cast iron water mains (in position) for branch connection of the internal dia of 20mm bore GI pipe complete all as specified and directed. |
| 89 | Dismantling 110mm bore, PVCor reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches if required. |
| 90 | S&F 110mm PVC (SWR) pipes single sockets, in any length with rubber ring joints, fixed to wall complete as specified and directed. |
| 91 | S&F 110mm PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in trenches complete as specified and directed. |
| 92 | S&F 75mm PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in trenches complete as specified and directed. |
| 93 | S&F 110mm bore PVC (SWR) bends of any radius complete as specified and directed. |
| 94 | S&F 75mm bore PVC (SWR) bends of any radius complete as specified and directed. |
| 95 | S&F 110mm bore, PVC (SWR) pipes type \"B\", single socketed in any length with rubber ring joints fixed to walls using MS holder bat, fixed complete all as specified and directed. |
| 96 | S&F in repairs, PVC (SWR) junction, single T equal or unequal 110mm bore. |
| 97 | Taking up or down 15 mm bore steel tubing and connections, including removal to store complete all as specified and directed. |
| 98 | Re-fixing 15mm bore serviceable steeltubes,with all new fittrings and fixed, to walls or laying in floors complete all as specified and directed. |
| 99 | S&F steel tubes, galvanised 15 mm bore, medium grade with all fittings & fixed complete to wall or laid in floors etc complete as specified and directed. |
| 100 | S&F in repairs curtain rails, mild steel, aluminium alloy chromium platedwith and including fancy type brackets, stops, rollers etc complete all as specified and directed. |
| 101 | Supplying and laying of CPVC pipes 20mm outer dia, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all fittings complete all as specified and directed. |
| 102 | Supplying and laying of CPVC pipes 25mm outer dia, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all fittings complete all as specified and directed. |
| 103 | M&L for cutting chases, pinning in making good to facings where required and pointing in cement motar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exc 10 cm girth in brick walls complete all as specified and directed. |
| 104 | S&F, stop valves, 15 mm bore cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions as specified and directed. |
| 105 | M&L for PVC (SWR) floor trap 75 dia, with CPgrating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed. |
| 106 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed. |
| 107 | Taking down carefully MCB DBs any type and size complete all as specified and directed. |
| 108 | Taking down old unserviceable fan, any type including cable end, dismantling blades and removing fan and blades to store complete all as specified and as directed |
| 109 | M&Lfor concealed point wiring with two runs of FRLSH PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm and one single core FRLSH PVC insulated unsheathed stranded copper conductor of size 1.50 sqmm green in colour as earth lead, drawing through in and including PVC rigid conduit of size not less than 20mm, with all fittings & accessories including provn of MS sunk terminal box of suitable size with cover and cover plate of appropriate size suitable for switch fixed flush to wall for mounting switch, sockets, fan regulators etc including cutting chases and making good by using cement mortar 1:4 complete for one light / fan point / call bell complete all as specified and directed. |
| 110 | All as per Item No.109above but for One 2/3 pin socket outlet 5/6Amps on independent board |
| 111 | All as per Item No.109above but forOne 2/3 pin socket outlet 5/6 Amps on the same board with other switches. |
| 112 | All as per Item No.109here in before but for one switch socket combination 15/16 Amps on independent board with cable 2.5 sq mm size and earth wire 2.5 sqmm |
| 113 | All as per Item No.109here in above but for one switch socket combination 15/16 Amps on independent board with cable 4 sq mm size and earth wire 4 sqmm |
| 114 | S&F for modular switch 1 way 6 A, 1 Module ISI marked complete all as specified and as directed. |
| 115 | S&F for modular socket 6-A, 2/3 Pin 2 module ISI marked complete all as specified and as directed. |
| 116 | S&F for modular socket 6-A, 2/3 Pin combined 2 module ISI marked complete all as specified and as directed. |
| 117 | S&F for modular switch 1 way 16 A, 1 Module ISI marked complete all as specified and as directed. |
| 118 | S&F modular socket 6 A/16 A, 2/3 Pin combined 2 module in existing location, complete all as specified and as directed. |
| 119 | S&F surface mounting LED adgelit slim round downlighter made of PDC AL with huge efficient LEDs and glare free opal diffuser, IP20 including all the accessories needed for its installation complete all as specified and directed. |
| 120 | S&F MCB Distribution board TPN 4 Way for mountingSPN/ SP/TPN/TP MCBs as Incoming / outgoing, factory made, confirming to IS, fabricated out of CRCA sheet , fitted with DIN channel, neutral link and suitable rated bus bar, DBs shall be semi glossyfinished with epoxy polyester based powder paint sprayed and backed at high temperature, between powder paint process the sheet steel having to go through the anti rust conditioning in not less than seven tank process to ensure smoothfinish and protection against corrosion atmosphere. The DBs shall be double door type with hinged door with locking arrangement. The DBs shall be of IP 43 - IK 09 with metal door complete all as specified and directed. |
| 121 | S&F in repair of MCB Distribution board SPN 08 Way for mountingSPN/ SP MCBs as Incoming / outgoing, factory made, confirming to IS, fabricated out of CRCA sheet , fitted with DIN channel, neutral link and suitable rated bus bar, DBs shall be semi glossyfinished with epoxy polyester based powder paint sprayed and backed at high temperature, between powder paint process the sheet steel having to go through the anti rust conditioning in not less than seven tank process to ensure smoothfinish and protection against corrosion atmosphere. The DBs shall be double door type with hinged door with locking arrangement. The DBs shall be of IP 43 - IK 09 with metal door complete all as specified and directed. |
| 122 | S&F in repair of MCB Distribution board SPN 12 Way for mountingSPN/ SP MCBs as Incoming / outgoing, factory made, confirming to IS, fabricated out of CRCA sheet , fitted with DIN channel, neutral link and suitable rated bus bar, DBs shall be semi glossyfinished with epoxy polyester based powder paint sprayed and backed at high temperature, between powder paint process the sheet steel having to go through the anti rust conditioning in not less than seven tank process to ensure smoothfinish and protection against corrosion atmosphere. The DBs shall be double door type with hinged door with locking arrangement. The DBs shall be of IP 43 - IK 09 with metal door complete all as specified and directed. |
| 123 | S&F miniature circuit breaker (MCB) 415 Volts, 10KA \"C\" curveTPN 4 Pole 160 AMPin the DB complete with connection, testing and commissioning all as specified and directed. |
| 124 | S&F miniature circuit breaker (MCB)SPN 32 to 40 Amps\"B\" Series 10 KA 240 volts complete all as specified and directed. |
| 125 | S&F miniature circuit breaker (MCB)SP 06 to 32 Amps\"C\" Series 10 KA 240 volts complete all as specified and directed. |
| 126 | S&F miniature circuit breaker (MCB)SPN 06 to 32 Amps\"C\" Series 10 KA 240 volts complete all as specified and directed. |
| 127 | M&L for earthing complete with GI earth plate electrode 600mm x 600mm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25m below ground levelwith the top edge of earth plate at depth not less than 1.5m below ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers protected by 15mm bore light grade GI pipe, funnel with 20mm bore GI medium grade pipe for watering, wire mesh, including concrete pit in PCC (1:3:6) type C-1, pre-cast RCC 1:2:4 type B-1 cover slab of size 350x350x50mm reinforced with 8mm dia TMT steel bars @ 15cm centre to centre in both direction and 10mm dia MS handle of suitable size, charcoal or coke and salt in alternative layers, necessary earth work in soft/loose soil all as shown in Electrical Plate No 3 of MES Schedule Part I and testing the base in which pit cover rests made up of MS angle iron (Frame) complete as specified and as directed. |
| 128 | S&F electronic step regulator (speed regulation in 5 steps) socket type suitable for ceiling fan 1200 sweep/1400 mm, 120 Watt ISI marked complete all as specified and as directed. |
| 129 | S&F angular/batten holderPVC/Polycarbonate suitable for batten fittings including oneLED Lamp of 9W minimum 4 hrs backup of complete all as specified and directed. |
| 130 | S&F LED light fitting mirror type with high ouput diffuser 2 feet, 10 watts 220 volts AC decorative type with aliminium housing with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable of suitable size complete all as specified and directed. |
| 131 | S&F invertor type LED fitting 1x18 watts, 220volts AC decorative box type with driver and of aluminium housing, holder LED tube light conncting up to 3 core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 132 | S&F Recess mounted 2x2 ceiling light 42 Watt deep drawn CRCA housing with higher power LED Seamless front frame with flat white hight transmission acrylic cover all as specified and directed. (Make : Havells Cat No PLANO2X2PLR42WLED865S or equivalent model in make Crompton/Phillips/Bajaj) |
| 133 | S&F Ceiling rose surface PVC, 3 terminals 65x50mm ISI marked complete all as specified and as directed. |
| 134 | S&F 35 Watt LED building security light new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embeded PC cover having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK08. including all fixing arrangement and taking down old light fittings of any type complete all as specified and as directed. |
| 135 | S&F Bldg light bracket fabricated out of GI Tubing light grade 32 mm bore Bend to the shape as directed and of length 1.5 mtrcomplete with mounting MS clamp of flat iron size 40X5mm of suitable length 02 pairs incl nut bolts etc of suitable size, including taking down old corroded one all as specified and directed. |
| 136 | M&L for sub main wiring with two run of 6 Sqmm (Nominal area) single core cable PVC insulated, multistranded, unsheathed, copper conductor cables (FRLSH), 1100 Volts grade drawn through PVC casing-caping/conduit of suitable size,fixed to wall/ceiling etc including one run of 6 Sqmm (nominal area) single core, PVC insulated, multistranded, unsheathed, copper conductor(FRLSH) as earth wire and duly connected to common earth point complete all as specified and as directed.Note : (a) PVC Casing-caping/conduit, two run wiring cables and one run of earth wire will be measured as one length (b) All incoming and outgoing cable shall be connected by using proper lugs & sockets. |
| 137 | Supply, laying, jointing, testing and commissioning cross-linked polyethylene (XLPE) insulated, armoured, nominal cross sectional area of main conductor 35 Sqmm, 3.5 core stranded aluminium conductor, ISI marked as per IS-7098 (Part-I) 1988 including cable glands, lugs etc to suit the cable size and to be laid in trenches, under floors, through GI pipe complete all as specified and as directed. Note : (1) Pipes shall be measured and paid separately under relevant items.(2) Excavation and earth work shall be measured and paid separately. |
| 138 | Supply, laying, jointing, testing and commissioning cross-linked polyethylene (XLPE) insulated, armoured, nominal cross sectional area of main conductor 16 Sqmm, 2 core stranded aluminium conductor, ISI marked as per IS-7098 (Part-I) 1988 including cable glands, lugs etc to suit the cable size and to be laid in trenches, under floors, through GI pipe complete all as specified and as directed. Note : (1) Pipes shall be measured and paid separately under relevant items.(2) Excavation and earth work shall be measured and paid separately. |
| 139 | Excavating in trenches not exc 1.5m wide and n.exc 1.5 m in depth, for foundations, etc, or for shafts, wells, cesspits, manholes, pier holes, cable trench etc and not exceeding 10 square meter on plan for manholes etc and not exceeding 1.5m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 140 | Returning filling in with approved excavated soil including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed. |
| 141 | Removing excavated soils to a distance not exceeding 50 metres and depositing where directed at a level n. exc. 1.5 metre above the starting point complete all as specified and directed. |
| 142 | M&L for clear sand cushioningfor protection of cable complete all as specified and directed. (only punned down thickness shall be measured) |
| 143 | S&F Sub-Class B brick, well burnt, laid breadth-wise along the axis of Cable laid in Trenches over Sand Cushion for laying UG Cable Protection, complete all as specified and as directed. |
| 144 | M&L for Boring of holes horizontal for laying not less than 40mm pipe (minimum depth 0.75 mtr from top level) under the road pavement, hard standing using trenchless technology complete all as specified and as directed.Note : cost of accessories required for making hole/bore deemed to be included in the quoted rate. |
| 145 | S&F 50 mm bore, steel tubes, galvanised, light grade with all fittings, laid in floor /road crossing /drain etc as in protection of UG cable complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 146 | S&F 40 mm bore, steel tubes, galvanised, light grade with all fittings, laid in floor /road crossing /drain etc as in protection of UG cable complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 147 | M&L for point wiring with 1.5 Sqmm (nominal area), FRLSH PVC insulated, multistranded, single core unsheathed, copper conductor cables passing through and including PVC casing caping with all fittings and accessories of PVC casing caping (like Tee, bend etc.) fixed to walls /ceiling etc. with and including 1.5 Sqmm (nominal area) FRLHSPVC insulated, unsheathed, stranded, single core, copper cable green in colour as earth continuity wire connecting to common earth point terminated in and including 1.6mm thick mild steel sunken terminal box of suitable size with 3mm thick hylam sheet top cover fixed with suitable size ofbrass screws suitable sizes cadmium plated iron screws and washers etc.for mounting switches, sockets, regulators etc complete for one light/fan/bell/buzzer point controlled by one ,one way switches complete all as specified and as directed. |
| 148 | All as per Item No.147here in above but for One 2/3 pin socket outlet 5/6Amps on independent board |
| 149 | All as per Item No.147here in above but forOne 2/3 pin socket outlet 5/6 Amps on the same board with other switches. |
| 150 | All as per item No. 147 above but wiring with cables of size 2.5 sqmm & cables of size 2.5 sqmm as continuous earth wire for one 5/16 Amps switch socket combination on Independent board complete all as specfied and as directed. |
| 151 | S&F Switch piano, flush type, single pole, one way switch5 Amps ISI marked complete all as specified and as directed. |
| 152 | S&F Bell Push Flush type 5 Amp, 240 volt ISI marked complete all as specified and as directed. |
| 153 | S&F for socket outlet, 2 in 1, 3 pin, 5 Amps, 240V bearing ISI marked complete all as specified and as directed. |
| 154 | S&F Switch socketcombination 2 in 1,5 Amps flush type, ISI marked complete all as specified and as directed. |
| 155 | S&F switch socket combination 2 in 1, 6 pin, 6/16 Amps,flush type, bearing ISI marked 240 volts complete all as specified and as directed. |
| 156 | S&F Bell Ding-Dong AC 230 V Single Pole ISI marked complete all as specified and as directed. |
| 157 | S&F 18/20 W surface and wall mounted LED batten with extruded aluminium housing having efficiency 125lm/W and integrated driver complete all as specified and directed. |
| 158 | S&FPVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 350 mm x 300 mm and 50 mm deep, including taking down old unserviceable one complete all as specified and directed. |
