|
| 1 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as specified and directed. |
| 2 | Taking down chowkats/frames with shutters (without taking off shutters from the frames) area n\"exc 1.5 Sqm each complete all as specified and directed. |
| 3 | Taking down shutters of any description area exceeding 1.0 Sqm and not exceeding 2.0 Sqm each complete all as specified and directed. |
| 4 | Taking down shutters of any description areanot exceeding 1.0 Sqm each complete all as specified and directed. |
| 5 | Taking down shutters of any description area exceeding 1.0 Sqm and not exceeding 2.0 Sqm each,resecuring or easing & adjusting and refixing in the same opening complete all as specified and directed. |
| 6 | Taking down shutters of any description area notexceeding 1 Sqm each, resecuring or easing & adjusting and refixing in the same opening complete all as specified and directed. |
| 7 | S&F 2nd class soft wood plain, solid, straight chowkets and frames,battens for grids of ceiling & lining wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed. |
| 8 | S&F for 35 mm thick2nd class Hardwood plain framed paneled shutters (any number ofpanels) with panels of timber flat on both sides (feather edged), or ofveneered particle board medium density, wood particle board with commercial face veneers, Supply and fixed to chowkats , complete all as specified and directed. |
| 9 | S&F 2nd class Hard wood 35 mm thick Glazed and skelton shutter, open and prepared to receive the glass, gauze etc.(without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc complete all as specified and directed |
| 10 | S&F for 30 mm thick Flush shutters, solid core construction ,with block board core and plywood face panels commercial type on both sides, Supply and fixed to chowkats complete all as specified and directed |
| 11 | Material & labour PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) as in hold fast bed block and like including dismantling of any description complete all as specified and directed. |
| 12 | S&F Plain Sheet glass 4.80 mm thick, selected quality and glazing with oil pane putty,glazing clips/beading in squares not exceeding 0.5 Sqm in each pane complete incl hacking out old broken glass, complete all as specified and as directed. |
| 13 | S&F Plain Sheet glass 4.80 mm thick, selected quality and glazing with oil pane putty, glazing clips/beading in squares exceeding 0.5 Sqm in each pane complete incl hacking out old broken glass, complete all as specified and as directed. |
| 14 | S&F Plain Sheet glass 4.00 mm thick, ordinary quality in steel or wooden frames and glazing with oil pane putty in squares not exceeding 0.5 Sqm in each pane, complete incl hacking out old broken glass, complete all as specified and as directed. |
| 15 | S&F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples. |
| 16 | S&Fmild steel butt hinges, medium weight cold rolled 100mm sizecomplete all as specified and as directed. |
| 17 | S&Fmild steel butt hinges, medium weight cold rolled 75mm sizecomplete all as specified and as directed. |
| 18 | S&F 150mm long aluminium anodized, barrel tower bolt of extruded sectioncompleteall as specified and as directed. |
| 19 | S&F 100mm long aluminium anodized, barrel tower bolt of extruded section completeall as specified and as directed. |
| 20 | S&F 150mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed. |
| 21 | S&F 100mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed. |
| 22 | S&F 200mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy fixed complete all as specified and as directed. |
| 23 | S&F in repairs 250mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy fixed complete all as specified and as directed. |
| 24 | S&F in repair aluminium door closer (aluminium extruded section) hydraulically regulated designation No 3, universe type, suitable for door shutte of 851 mm to 1000 in width and of weight 61 to 80 kg. |
| 25 | M&L double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed. |
| 26 | S&F floor door stopper 150mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed complete all as specified and as directed. |
| 27 | S&F in repairs brass mortice lock 4 levers (Harrison) vertical type size 100 mm or above in old or new position complete all as specified and as directed. |
| 28 | S&F in repairs 25mm dia powder coated mild steel, chromium platedcurtain rod including brackets as in repairs. |
| 29 | S&F in repair 200mm long mild steel ordinary rat tail rodpattern springs including roller and roller plate complete all as specified and as directed. |
| 30 | S&F fabricate & fix in position anodised aluminium powder coated (minimum thickness of powder coating50 micron of approved colour) door shutter with frame, partly glazed with 5mm thick tinted glass and partly panelled with 12mm thick prelaminated particle board with both side decorative laminated including rubber bead joining cleat for fixing in position, aluminium door handle 150mm size, aluminium barrel tower bolt 200mm size, including hydrolic door closer all as specified and directed. (a) Frame ( top & side) section shall of size 101.60 x 44.75 x 2.4mm (Section No 14021) (b)Vertical Members of shutter section shall be of size 85.00x44.45x2.00mm (section No 19560) (c) Top Members of shutter Section shall be of size 83.50 x 44.45 x 2.00mm (section No 19581) (d)Lock rail (Middle member) of shutter section shall be of size 150.00x44.45x3.00mm (section No 19596) (e) Bottom Members of shutter section shall be of size 150.00x44.45x3.10mm (section No 19584) (f) Glazing clip for securing glass of shutters shall be of 0.80mm thick (section No 19370). |
| 31 | S&F Anodised aluminium powder coated window with Aluminium griland ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified. |
| 32 | S&F factory made single extruded WPC ( Wood Polymer Composite) solid decorative type flush door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 ( suspention Grade), calcium carbonate and natural fibres ( wood power/ rice husk/wheat husk) and non toxic additives ( maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strenth of 1800 N ( face) & 900 N ( Edge), minimum compressive strenth 50 n/mm2 modulus of elasticity 850 n/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhessive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screw, all as per direction of Engr-in-Charge. |
| 33 | Dismantling wrought iron or mild steel work of any description not otherwise provided for. |
| 34 | S&F mild steel work as in hold fastsand similar work confirming to Fe-290 or Gd -E 165 complete.all as specified and as directed by the Engr-in-Chage |
| 35 | S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails.M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling& fixing in the frame at site complete all as specified and as directed by Engineer-in-Charge. |
| 36 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed by Engineer-in-Charge. |
| 37 | M&L for 2nd class soft wood clean sawn as in beeding for edges of Ceiling ,lining ,or wooden flooring work fixed with nails exc 6 sqcm and n exc 13 sqcm in sectionincluding dismantlng complete all as specified and as directed. |
| 38 | M&L for9mm thick prelaminated particle boardmedium interior grade, prelaminated oneside with decorated choice lamination & other side balancing whitelamination fixed with screws to timber frame work as in wall panelling, shelves/boardingincluding dismantlng complete all as specified and as directed. |
| 39 | M&L for9mm thick prelaminated particle boardmedium interior grade, prelaminated oneside with decorated choice lamination & other side balancing whitelamination fixed with screws to timber frame work as in ceiling, shelves/boardingincluding dismantlng complete all as specified and as directed. |
| 40 | M&L 6mm (5 ply) thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed with nails to timber frame work as in walls, including dismantlng complete all as specified and as directed. |
| 41 | M&L 6mm (5 ply) thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed with nails to timber frame work as in ceiling, including dismantlng complete all as specified and as directed. |
| 42 | S&F gypsum ceiling board 8 to 9 mm thick in 600 x 600 mm panneldesigner ceiling tiles laminated with white colour PVC film on the face side and a metalised polyster film on the back side, conforming to IS-14862 type B category three including suspended false ceiling using E-grid suspended ceilinggrid system of gridsize 600x600mm with GI frame work of main runner 38 x 24mm sheet thickness 0.4mm, cross Tee 28 x 24mm sheet thickness 0.3mm and wall angle 24 x 24mm to be placed in the grid suspended by 4mm GI wire hanger to be fixed as per site requirement including taking down of old false ceiling complete all as specified and directed. |
| 43 | M&L for wooden floor tiles 7 mm thick with dove tailed joints laid over 150 micron polythene film and3 mm thick foam as per manufacturer\"s instructions, and fixed with decorative wooden beadings as per site requirement including taking down of wooden floor tiles/boarding any type/description complete all as specified and directed. Make and shade of tiles be all as approved. Make : Action tesa/Kajaria/Armstrong. |
| 44 | Provn of wooden panelling on wall/ceiling using following specifications including taking down old wooden panelling complete all as specified and directed:-(a)S&F 2nd class hard wood wooden gutties of size 25mmx25mmx 200mm depth fixedin wall by making holes in brick wall and making good in cement mortar 1:3 complete all as specified and directed.(b)S&F horizontal runner 2nd class soft wood (Kali at 120 c/c of sectional area exc. 13 Sqm and n. exc 25 Sqm clean sawn treated with two coats of creoste oil mixed with good quality pesticide for antitermite treatment.(c) S&F 1st class soft wood (Deodar) boarding 12mm to 15mm thick as in wall panelling planed one side, wrought and other side clean sawn and applying two coats of good quality varnish on plain surfaces over a coat of primer mixed with good quality pesticide for antitermite treatment on the other side and fixed with screws/nails on wooden runners.(d) S&F 1st class soft wood (Deodar) decorative beading 40mm wide on top surface of wall panelling including two coats of varnish complete all as specified and directed. |
| 45 | M&L for preperation of new or old untreated wood or wood based surface of any description over 10cm width or girth and applying two coat of synthetic enamal paint over a coat of pink primer complete all as specified and as directed. |
| 46 | M&L for 2nd class hard wood clean sawn as in scantling fixed with nails, framed and fixed as in framed work including dismantling of existing timber scantlings 40 Sqcm and over in section, in any position complete all as specified and directed. |
| 47 | M&L vitrified light shade ceramic tiles 10mm thick (square /rectangular) polished area of each tiles n exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colours of tilesincluding 15 mm thick screed bed and bedding layer in CM 1:6 for laying floor finishes incl dismantling floor tiling including cement mortar bedding (but not backing), removing serviceable tile to store and rubbish off the premises complete all as specified and directed. |
| 48 | M&L Non-Skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed or bedding layer in Cement Mortar1:6 for laying floor finishes incl incl dismantling floor tiling including cement mortar bedding (but not backing), removing serviceable tile to store and rubbish off the premises complete all as specified and directed. |
| 49 | M&L Non-Skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed or bedding layer in Cement Mortar1:6 for laying floor finishes incl dismantling floor tiling including cement mortar bedding (but not backing), removing serviceable tile to store and rubbish off the premises complete all as specified and directed. |
| 50 | M&L for (450mmx350mmx 7mm thick ) glazed ceramic tiles on vetical surfaces set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments.(Note: Any disturbed surfaces shall be matched w/o any extra cost to the govt) incl 10mm thck backing coat bed below tile for dado/skirting CM 1:4. incl dismantling wall tiling including cement mortar bedding (but not backing), removing serviceable tile to store and rubbish off the premises complete all as specified and directed. |
| 51 | S&F 0.63 mm thick black, corrugated mild steel sheeting with two corrugations side lap, fixed with J or L hooks, in roofs, walls etc. with grade of zinc coating 275 including dismantling of existing plain or corrugated steel sheeting any guage thickness including nanital or similar pattern complete all as specified and directed. |
| 52 | S&F 0.63mm thick plain black, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 indlucing dismantling of existing plain or corrugated sheeting any gauge thickness including nanital or similar pattern complete all as specified and directed. |
| 53 | M&L Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screwsincluding dismantling of existing plain or corrugated sheet of any description complete all as specified and directed by Engr-in-Charge. |
| 54 | M&L Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screwsincluding dismantling of existing plain or corrugated sheet any description complete all as specified and directed by Engr-in-Charge. |
| 55 | Taking up or down steel/PPR tubing 25mm to 32 mm bore including cleaning for refixing or removal to store. complete all as specified. |
| 56 | S&F 25mm bore 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene incl all random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified. |
| 57 | S&F in repairsPVC waste pipe 32mm bore with cup and washers complete on new or old locations.complete all as specified. |
| 58 | S&F in repairsfor viterous china wash hand basinflat backsize 550x480mm excluding traps, waste, chain, plug and porcelain stopper incl brackets, complete all as specified. |
| 59 | S&F in repair 10 ltrs capacity incl PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets including flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern, complete all as specified |
| 60 | S&F in repair viterous China squatting pan or Orissa patten 580 x 440 mm white with integral foot rest (excluding cistern)with front or back inlet ant pattern as in repairs incl bedding with PCC type B-I 1:2:4 using 20 mm graded crushed stone aggregate. |
| 61 | S&F in repair PVC connection 15mm bore with ptmt nuts of length 600mm complete all as specified and directed by Engr-in-Charge. |
| 62 | S&F in repair Vitreous China urinal half stall, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) (back or corner wall type),complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive offixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed. |
| 63 | S&Fin repairs 15mm bore bib taps long or short bodyfancey typechromium plated with capstan head chromium plated screwed down screwed for iron pipe or brass ferrule. (Minm wt 350 Gms)complete all as specified and directed. |
| 64 | S&F in repairs 15mm bore pillar tap fancy type cast copper alloy with capstan head chromium plated screwed down under high pressure with or without lettered hot or cold with long shank and fly nuts screwed for iron pipecomplete all as specified and directed. |
| 65 | S&F Grating doom 125 mm with waste hole of PTMT complete all as specified and as directed. |
| 66 | S&F in repairs 15mm bore stop cockor angle valve fancy type chromium plated cast copper alloy screw down under high pressure with crutch or butter fly handle screwed both ends for iron pipe or brass ferrule complete all as specified and directed by Engr-in-Charge. |
| 67 | Deduct Schedule of Credit of Rs (-) 62925.00 (Minus) as listed in Schedule \"A\" (Contd). Contract Sum shall be arrived after deducting the credit amount.Note :- Tenderers will not quote against this item being a firm amount. |
