|
| 1 | Note 1: (Applicable for all parts/items) : The bidders/contractors are advised to read tender document, all drawings & all corrigendum/amendments and general condition of contracts before entry/quoting the rates.Note 2:- Attention to bidder is hereby invited to upload revised BOQ if published during their bid submission. Uploading ofincorrect/ pre-revised BOQ shall be treated as non bonafide and rejected. Fixed credit has been given in technical documents which shall be taken into account during acceptance of bid/tender. |
| 2 | Surface excavationn.exc 30 cm deep and averaging 15 cm deep getting out in soft/loose soil complete all as specified and directed. |
| 3 | Excavating in trenches, n. exc 1.5 m wide and n. exc 1.5 m in depth; for foundation, etc. and getting out in soft/loose soilcomplete in all respect as specified and directed |
| 4 | All as per item No. 2 here-in-before but depth exc 1.5m and n.exc. 3.0m complete all as specified and directed. |
| 5 | Excavating over areas, n exc 1.5 m deep and getting out in soft/loose soil complete all as specified and directed. |
| 6 | Excavating over areas, exc 1.5 m but n.exc 3.0 m deep and getting out in soft/loose soil complete all as specified and directed. |
| 7 | Removing excavated material (soils) n. exc 50 m depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed. |
| 8 | Removing excavated material (soils) exc 50 m but not exc 250 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed. |
| 9 | Removing excavated material (soils) exc 250 m but not exc 500 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed. |
| 10 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete in all respect as specified and directed. |
| 11 | M&L for PCC (1:4:8) type D2 (using 40mm crushed and graded stone aggregate)as in foundaion and mass fillingcomplete in all respect as specified and directed |
| 12 | Providing and laying for M20 reinforced cement concrete (using 20mm nominal size crushed and graded stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns etc complete all as specified and directed. |
| 13 | Providing and laying for M-20 reinforced cement concrete(using 20mm nominal size crushed and graded stone aggregate) in columns, posts, struts etc. complete in all respect as specifified and directed. |
| 14 | Providing and laying for M-20 reinforced cement concrete(using 20mm nominal size crushed and graded stone aggregate) in beams, lintels, etc.complete all as specified and directed. |
| 15 | M&L for RCC M20 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate as in chajjas complete all as specified and as directed. |
| 16 | M&L for deformed TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirallyfor hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete in all respect as specifified and directed. |
| 17 | M&L for deformed TMT steel bars 5mm dia and over upto and including 10mm dia in stirrups, cut to length, bent to shape required, including cranking, bending spirallyfor hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete in all respect as specifified and directed. |
| 18 | M&L for plinth protection or in foot path of 75 mm thick of cement concrete using type C-1, 1:3:6 (using 20 mm nominal size crushed and graded stone aggregate) in alternate penals and finished fair and even complete in all respect as specified and directed. |
| 19 | M&L forformwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter in rough finished flat surface of concrete complete in all respect as specifified and directed. |
| 20 | M&L forformwork to sides of pillars, posts, struts, piers,columns and stanchionsin rough finished flat surface of concrete complete in all respect as specifified and directed. |
| 21 | M&L forformwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. in rough finished flat surface of concrete complete in all respect as specifified and directed. |
| 22 | M&L brick work with sub-class \"B\" old size bricks of class designation 75, straight or curved on plan exc. 6m mean radiusbuilt in CM (1:6) including dismantling of existing surface complete all as specified and directed. |
| 23 | M&L for half brick work with subclass ‘B’ old size bricks of class designation 75, straight or curved on plan exc. 6m mean radius built in CM (1:4) including dismantling of existing surface complete all as specified and directed. |
| 24 | Providing and laying 40mm thick damp proof course to horizontal or vertical surfaces including necessary formwork using type B-0, 1:2:4 concrete(using 12.5mm nominal size crushed and graded stone aggregate) mixed with water proofing compound complete in all respect as specifified and directed. (Water proofing compound shall be measured & paid separately under supply only item) |
| 25 | M&L 15mm thick plastering on brick/stone/concrete surafces of wall in cement mortar (1:6) finished even and smooth without using extra cement complete in all respect as specifified and directed. |
| 26 | M&L 15mm thick plastering on brick/stone/concrete surafces of wall in cement mortar(1:4) finished even and smooth without using extra cement complete in all respect as specifified and directed. |
| 27 | M&L for preparation of newly undecorated plastered surface of wall and applying two coats of oil bound distemper finished with spunge roller over a coat of alkali resistant priming paint over 2mm thick (in two layers), wall care putty complete in all respect as specifified and directed. |
| 28 | M&L for preparation of new plastered surface of walland applyingtwocoats of weather coat over two coat of home shield over 2mm thick (in two layers), wall care putty over a coat of primer complete in all respect as specifified and directed. |
| 29 | Supply only water proofing compound complete in all respect as specifified and directed. |
| 30 | M&L for Broken stone orboulders hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete in all respect as specified and directed |
| 31 | Providing and laying 75mm thick cement concrete type C-2, 1:3:6 (using 40mm nominal size crushed and graded stone aggregate) and finished even and fair in base concrete complete in all respect as specifified and directed. |
| 32 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including taking down existing sheet complete all as specified and directed. |
| 33 | S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in eves covering or of similar type, fixed with self tapping screws including necessary mild steel flats and screws for fixing with framed structure ncluding taking down existing sheet complete all as specified and directed. |
| 34 | S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, tubular/hollow section, channel or flat sections) including distance pieces, cleats etc. using FE-410W (Grade E-250 quality \"A\") including dismantling of existing surface complete all as specified and directed. |
| 35 | Material and labour for preparation of new undecorated painted steel surface of any description not otherwise described,over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat ofred oxideprimercomplete in all respect as specified and directed. |
| 36 | S&F powder coated aluminium ventilator with half portion louvered (adjustable)with 4mm thick glass in louver and balanced portion fixed 4mm thick frosted glass glazing including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings complete in all respect as specified and directed. |
| 37 | M&L for any colour of granite stone without white spots Granite stone slab 17 to 19 mm thick, as in floor, dado, steps, laid over and including screed bed 15 mm thick in cement mortar (CM) 1:6, jointed and pointed with white cement mixed with pigment to match the shade of stone including cuttingl rubbing and polishing surface, including cutting for wash hand basin, sink, gas pipe hole etc., to the entire satisfaction of the Engineer-in-Charge, complete in all respect as specified and directed. |
| 38 | M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match respect as specified and directed. |
| 39 | S&F CP finish cast copper alloy, two way bib cock complete in all respect as specified and directed. |
| 40 | S&F 5.50 mm thick of 1.40 m x 1.0 m size bevelled edge mirror of selected quality decorative type designer mirror with chromium plated brass screws and cup washerscomplete all as specified and directed. |
| 41 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant complete all as specified and directed. |
| 42 | S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing inframe at site as per specification & drawing, complete in all respect as specified and directed. |
| 43 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails.M.S. frame shall be covered with heat moulded plain colour PVC \"C\" channel haivng a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and botom rail on either side & as gap insert for top rail & bottom rails; Panelling of plain colour PVC sheet to be fitted in the M.S. frame weloded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling and fixing in the frame at site as per specification & drawing, complete in all respcet as specified and directed. |
| 44 | S&F for solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, supplying & fixing in opening as per specification & drawing, complete in all respect as specified and directed. |
| 45 | M&L for 110 mm Bore PVC (SWR) pipe single socket in any length with rubber ring joints fixed to wall complete all as specified and directed. |
| 46 | S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 47 | S&F 110mm PVC (SWR) WC connector bent type complete all as specified and directed. |
| 48 | S&F PVC(SWR) junction single (single \"T\") equal or unequal 110mm bore complete all as specified and directed. |
| 49 | S&F PVC (SWR) 110 mm dia vent cowl complete all as specified and directed. |
| 50 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 75 mm bore complete in all respect as specified and directed. |
| 51 | S&F PVC (SWR) 75mm dia bent type complete all as specified and directed. |
| 52 | S&F PVC (SWR) 75 mm dia vent cowl complete all as specified and directed. |
| 53 | S&F PVC (SWR) branch piece with access door, single (Single Tee) equal or unequal 75mm bore pipe complete in all respect as specified and directed. |
| 54 | S&F 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches with all fittings fixed complete to walls and ceiling or laid in floors including necessary cutting, chasing etc complete all as specified and directed. |
| 55 | S&F 20mm GI tube medium grade complete in all respect as specified and directed. |
| 56 | S&F 20mm dia of gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron/CPVC pipe/fittings and fixed complete all as specified and directed. |
| 57 | S&F in repair table top wash hand basins (WHB), vitreous china of size 500x400 mm x 150 mm ,Waste coupling 32 mm SS and SS bottle trap including 15 mm bore dia fancy type CP finish swan neck basin mixer, cast copper alloy with capstand heads, screw down high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts, screw for iron pipes complete in all respect as specified and directed. |
| 58 | S&F aluminium anodised, barrel tower bolt of extruded section 200 mm long, complete in all respect as specified and directed. |
| 59 | S&F Aluminium handle cast type anodised 125 mm, complete in all respect as specified and directed. |
| 60 | S&F three layered white in colour rotational moulded made out from LLDPE material water storage tanks of capacity 500 ltr (cylindrical vertical with closed top) including three tank nipples of 20 mm nominal bore dia hoisted and fixed in position including dismantling/ taking down all as specified in SSR part I, complete in all respect as specified and directed. |
| 61 | S&F PTMT ball valve high pressure 20 mm bore with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe, complete in all respect as specified and directed. |
| 62 | S&F in repair vitreous chinaware sqatting pan of size 580 x 440 mm, \"ORISSA PATTERN\" with new PVC \"P\" or \"S\" trap bedded in cement concrete with integral foot rests, complete in all respect as specified and directed. |
| 63 | S&F Vitreous China wash down water closet pan (pedestal pattern), white with toilet seat coverwith integral foot rests, complete in all respect as specified and directed. |
| 64 | S&F in repair Health faucet cast coper alloy CP finish 15 mm dia fancy type with brass plated flexible hose and wall hook, 1.00 mtr complete, in all respect as specified and directed. |
| 65 | S&F in repair PVC valveless, syphonic action type, low level dual flush cistern 10 ltr capacity, white, wtih inlet, ball valve, float and handle including bracketS&Flush pipe of polyethylene for low or high level cistern of required height of high density PVC, 32 mm dia pipe, complete in all respect as specified and directed. |
| 66 | S&F PVC connection 15 mm size with PTMT nuts of length 450 mm, complete in all respect as specified and directed. |
| 67 | S&F in repairs 15 mm bore fancy type CP finished angle valves, cast copper alloy, screwed down, high pre-ssure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete in all respect as specified and directed. |
| 68 | S&F in repairs long body Bib taps of 15 mm bore, fancy type CP finish cast copper alloy with crutch handle, screwed down, screwed for iron pipes, complete in all respect as specified and directed. |
| 69 | Providing & laying heavy duty non skid coloured digital printed floor tiles of size 300mmX300mm ,8 to 10mm thick set and jointed in neat cement slurry and pointed with white cement with pigment to match the tiles colour over and including 15mm thick screed bedding in cm 1:6 and dismentling of existing tiles/blocks of any discription complete in all respect as specified and directed. |
| 70 | Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., n exc. 1.5 m high from base complete all as specified and directed. |
| 71 | Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., exc. 1.5 m high but n.exc 3.0m from base complete all as specified and directed. |
| 72 | M&L Boulder pitching, laid dry, hand packed tightlycomplete all as specified and directed. |
| 73 | M&L Boulder pitching, laid dry, hand packed tightly and pitching is grouted with cement & sand mortar 1:6all as specified and directed. |
| 74 | Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 75 | M&L 40 mm thick flooring in Plain Cement concrete type B-1,( 1:2:4) (using 20mm graded stone aggregate) finished even and smooth using extra cement complete all as specified and directed. |
| 76 | S&F 110mm bore PVC SWR pipes single socketed, in any length with rubber ring joints laid in trenches or floors complete all as specified and directed. |
| 77 | S&F in repair for second class hardwood plain,solid ,straight,chowkats and frames,wrought, framed rebated on the solid ,rounded or chamfered,put together with glue pinned at joints, complete in all respect as specified and directed. |
| 78 | S&F Vitreous China urinals, full stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern complete all as specified and directed |
| 79 | S&F 8 mm thick curved shaped urinal partition with frosted glass size 900 x 450 mm including stainless steel fixing brackets complete in all respect as specified and directed. |
| 80 | S&F Tubular towel rail, 20 mm dia, D type, 60 cm long between flanges cast copper alloy, chromium plated finish, complete in all respect as specified and directed. |
| 81 | Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm and n.exc 4 sqm each, complete in all respect as specified and directed. |
| 82 | Taking down chowkats and shutters (without taking off shutters from the frame) n.exc 1.5 sqm each, complete in all respect as specified and directed. |
| 83 | S&F 16mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches with all fittings fixed complete to walls and ceiling or laid in floors including necessary cutting, chasing etc complete all as specified and directed. |
| 84 | M&L for 25 mm thick of cement concreteflooring using type B 0, 1:2:4 (using 12.5 mm nominal size crushed and graded stone aggregate) and finished fair and even without using extra cement, complete in all respect as specified and directed. |
| 85 | Providing and laying skid/non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floor etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match tile colour over 15 mm thick screed bed in cement mortar (CM) 1:6, complete in all respect as specified and directed. |
| 86 | Providing and laying coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.08 sqm but not exceeding 0.15 sqm, in skrting/dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match tile colour over 15 mm thick rendering in cement mortar (CM) 1:4, complete in all respect as specified and directed. |
| 87 | M&L for coloured ceramic tiles 8 to 10 mm thick (square/ rectangular) area of eachtile exceeding 0.18 Sqm but not exceeding 0.72 Sqm, in dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile colour complete in all respect as specified and directed. |
| 88 | M&L for Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles complete in all respect as specified and directed. |
| 89 | S&F PVC coloured insulated over MS pipe 20mm dia curtain rod with fixing bracket, stops, rollers etc. complete in all respect as specified and directed |
| 90 | Providing and fixing false ceiling at all height including fixing of frame work made of special section power press from m.s Sheets and galvanized with zing coating of 120 gram g.m.s /sqm includind fixing Perimeter channels 0.5 mm thick 27mm height Heading flages of 20 mm and 30mm long, the Perimeter of ceiling fix to wall with the Help of rawl plugs including fixing of 12mm Gypsum board including jointing and Finishing to a flush finish. With putty , Primer and double coat ceiling paint finish including dismantlling of existing false ceiling complete in all respect as specified and directed. |
| 91 | S&F Itched toughened frosted glass 12mm thick for partition and door fixed with stainless steel hinges ,handle and stainless steel fixing cleat complete in all respect as specified and directed. |
| 92 | S&F of powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in ewach door, hinges, anodised aluminium snap beading screws etc. complete all as specified and directed. |
| 93 | S&F powder coated aluminium sliding window with/without sash bars, aluminium sections of thickness 2mmincluding necessary joining cleats, glazing clips, EPDM rubber packing (of 50 No grade), powder coated aluminium snap beading, screws, center grooved stainless steel ball-bearing double roller2 position height adjustment, sound/dust brush, recessed handle with locking arrangement complete in all respect as specified and directed. (Powder coating shall be min 50micron) (Note:all external members to be joined at 45 degree angle at corner) |
| 94 | S&F aluminium anodised sliding door bolts with hasp and staple (boil type) 19mm dia bolt 300 mm long complete allas specified and directed. |
| 95 | S&F 30mm thick flush shutter, solid core construction, with block board core with decorative face veneers with lippingon both sides complete allas specified and directed. |
| 96 | S&F 100mm size Stainless steel butt hinges complete allas specified and directed. |
| 97 | M&L for complete removal of existing treatment on wall and applying two coats of oil bound distemper (OBD) and finished another one coat with spunge roller over one coat of alkali resistant priming paint over 2 mm thick (in two layers) wall care putty, complete in all respect as specified and directed. |
| 98 | M&L for preparation of old decorated plastered surface of wall after complete removal of existing treatment and applying two coats of weather coat over 2 mm thick wall care putty (in two layers) over a coat of primer including preparation of surface, complete in all respect as specified and directed. |
| 99 | S&F 5.50 mm thick bevelled edge mirror of selected quality decorative type designer mirror with chromium plated brass screws and cup washerscomplete all as specified and directed. |
| 100 | S&F in repair Counter Top Basin, Size: 600x400x185 mm including Waste coupling 32 mm SS and Bottle Trap 32mm Size with 300mm & 190mm Long Wall Connection Pipes & Wall Flange ,complete in all respect as specified and directed. |
| 101 | M&L for preparation of new undecorated wooden surfaces with pre mixed wood filler used as putty of grith exc 10cmand applyingtwo coats of synthetic enamel paintover one coat of pink primer before painting complete all as specified and directed. |
| 102 | S&F 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane, complete in all respect as specified and directed. |
| 103 | S&F stainless steel wire cloth,0.36 mm nominal dia of wire and average width aperture 1.40 mm and fixed with stainless steel wire staples fixing withbeads, complete in all respect as specified and directed. |
| 104 | S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; and similar work conforming to Fe. 290, Gde-E-165complete in all respect as specifified and directed. |
| 105 | M&L in replacement of point wiring with 1.5 sqmmFRLSH, PVC insulated stranded copper conductor single core including non metalic PVC conduit medium grade (MMS ISI) of size not less than 20 mm dia(or as site requirement) concealed in wall/over ceiling, metal flush boxes of required size and with modular plates incl of all accessories and all as specified including 1.5 sqmm FRLSH PVC insulated sheathed multistranded copper earth conductor to common earth and connected to earth dollyfor light / fan point controlled by one switch.Note:- (i) Cost of PVC conduit, modular plates,frames, cover plates etc; are deemed to be included in the quoted rate.(ii) M&L for cutting chases on walls / ceilingand making good disturbed surfaces including finishing with cement mortar (1:3) etc; are deemed to be included in the quoted rate. |
| 106 | All as per item 104 above but for 3 pin 5 Amps switch socket on independent board with 1.5 sq mm copper cable complete all as specified and directed. |
| 107 | All as per item 104 above but for 3 pin 16 Amps switch socket combination on independent board with 2.5 sq mm copper cable complete all as specified and directed. |
| 108 | All as per item 104 above but for 3 pin 5 Amps switch socket on same board with 1.5 sq mm copper cable complete all as specified and directed. |
| 109 | S&F in replacement of modular switch in replacement,10A,1 module single pole, one waycomplete all as specified and directed. |
| 110 | S&F in replacement of modular socket outlet in replacement ,5 pin ,10 Amps,2 module, 240 Volts complete all as specified and directed. |
| 111 | S&F in replacement of modular switch in replacement 16A,1 module single pole, one waycomplete all as specified and directed. |
| 112 | S&F in replacement of modular socket outlet in replacement ,5 pin ,16 Amps,2 module, 240 Volts complete all as specified and directed. |
| 113 | S&F in replacement of in replacement ofceiling rose polycarbonate typethree terminals complete all as specified and directed. |
| 114 | S&F in replacement of point wiringwith 1.5 Sqmm multi stranded copper conductor 1100 V grade, ISI marked , PVC insulated unsheathed cable (with approved colour code) FRLSH cable drawn in & including PVC casing caping of 25/32 mm wide, with double locking type, includingall accessories casing caping as approved by EIC, with PVC 1.5 mm multi stranded insulated unsheathed copper wire, ISI marked of green colour for continous earth, PVC terminal box and modular board making good disturbed surface to match with the existing surface for one light /fan/bell point controlled by oneswitch complete all as directed by Engineer-In-charge. |
| 115 | S&F in replacement of replacement of modular switch10A,1 module single pole, one waycomplete all as specified and directed. |
| 116 | S&F in replacement of replacement ofceiling rose polycarbonate typethree terminals complete all as specified and directed. |
| 117 | S&F in replacement of exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mmincluding cutting into wall/wooden surface etc complete as specified and directed. |
| 118 | S&F in replacement of electric water heater storage type ABS body(as directed by Engineer-In-charge) with glasslined stainless steel inner tank capacity 25 litres, heating element of 2 KW, BEE 5 star rated with all accessories such as safety valve , thermostat , NRV , SS 304 connection pipe , nut bolt with metalic anchor fasterner etc for fixing on wall& testing , Make- Usha Model No 44871WB25AX26N - SWH WARMBOY 25L WHITE /Havells Model No- GHWAFATWB025 Fabia /Crompton Arno Neo, 2000W Storage Water Heateror of equivalent make as approved by GE from the list of approved makes complete all as specified and directed. Note: Warranty of 2 year on geyser and 07 year on geyser tank shall be submitted by the contractor complete all as directed by Engineer-In-charge. |
| 119 | S&F in replacement of steel water tubing 15mm bore \"medium grade\" galvanised with all GI fittings (such as bends, elbows, tees, conectors, short pieces, back nuts, unions, caps & plugs etc) fixed complete to wall and ceiling or laid infloor including cutting, threading and testing complete all as specified and directed. |
| 120 | S&F in replacement of stop cock, cast copper alloy screwed down, high pressure with crutch or butter fly handle, crewed both ends for iron pipe or unions fixed of 15 mm bore dia of pipe chromium plated fancy type complete all as specified and directed. |
| 121 | S&F in replacement ofsingle pole and neutral enclouser with atwo pin and earth plug and socket complete with one pole MCB 20 Amps \"C\" curve complete all as specified and directed . |
| 122 | S&F in replacement of Bib taps, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed of size 15 mm complete all as specified and directed. |
| 123 | S&F in replacement of LED lights fitting 1x 20W, 220V, AC with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 124 | S&F in replacement of LED Building light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. |
| 125 | S&F in replacement of mirror light batten type 10W 230V AC, 50Hz, Pf >0.98, THD <10% on wall complete all as specified and directed by Engineer in charge. |
| 126 | Supply and fixing in replacement LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC in warm white color recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as directed by Engineer-In-charge. |
| 127 | M&L for refixing of Split Acs (Indoor &Outdoor)after dismantling carefully with all accessories incl gas charging/insulation of existing copper pipes complete all as specified and directed. |
| 128 | M&L for Laying and testing ofXLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 50 sq. mm,3.5/4 core complete all as specified and directed. |
| 129 | Material and labour for sand cushioning for cable protection using clean dry sand complete all as specified and directed. |
| 130 | Supply and laying in trenches brick common burnt clay building brick, subclass \"B\" designated- 75 with width equal to length of brick for cable protection complete all as directed by Engineer-In-charge. |
| 131 | S&F in replacement of ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) In Replacement Of Old Fans.Old Fans Will be Credited to AGE E/M complete all as directed by Engineer-In-charge. |
| 132 | S&F in replacement of single pole and neutral enclouser with atwo pin and earth plug and socket complete with one pole MCB 20 Amps complete all as spd and directed . |
| 133 | S&F in replacement of sheet metal enclosure for Ekinox TPN DB-VTPN 4 way 415 V, double door , 250 A copper bus bar , IP 43 , including 100 Amp MCCB as incomerflush mounted complete all as specified and as directed. |
| 134 | S&F in replacement of sheet metal enclosure double doorfor MCB DBs SPN 4 way 240 V, complete flush mounted all as specified and as directed. |
| 135 | S&F in replacement of sheet metal enclosure double doorfor MCB DBs SPN 12 way 240 V, complete flush mounted all as specified and as directed. |
| 136 | S&F in replacement oft MCB single pole (SP) 5 to 40 Amps,240 volts , C curve , AC , 50 Hz ,10 kA complete all as specified and directed. |
| 137 | S&F in replacement of ofMCB Single pole & neutral (SPN)32 Amps, 240 volts , C Curve, AC , 10 kA complete all as specified and directed. |
| 138 | Supply, laying and testing in replacement of cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 4 core incl necessary excavation and sand cushioning complete all as directed by Engineer-In-charge. |
| 139 | M&L for in replacement of 25 mm dia GI tubing light grade with all necessary fittings laid in trenches, fixed to walls/ poles/ under road/ floor etc complete all as specified and directed. |
| 140 | Supply and fix Valve, stop, screwed,25 mm (1.25) dia pipe all complete all as directed by Engineer-In-charge. |
| 141 | M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6mm thick buried directly in ground ( earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less than 1.5 Metre below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 15 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as shown on electrical plate No. 3 of SSR part - I , including taking out old U/s complete alll as specified and directed . |
| 142 | Supply and fixing in replacement round shape 10/15 watt 220 volts AC recessed type in warm white color with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as directed by Engineer-In-charge. |
| 143 | Supply and fixing in replacement decorative wall light fixture metalic body single head wall light suitable for 20 watt maximun wattagecomplete all as specified and as directed. |
| 144 | Supply and draw submain wiring in replacement of old wiring with two single core 6 sq mm FRLSH PVC insulated copper cable 1100 volts grade multi stranded, sheathed conductor in PVC conduit of suitable sizeincluding 6 sq mm multi-strand FRLSHPVC insulated copper wire for earth continuity conductor connected to common earth dolly complete and making good disturbed surface complete incl taking out old unserviceable submain wiring of any type.Note:- Cost of PVC conduit, cutting chases on walls and making good disturbed wall surfaces including finishing with cement mortar (1:4) matching with the existing shade / tint are deemed to be included in the rates quoted. |
| 145 | Supply and draw submain wiring in replacement of old wiring with two single core 4 sq mm FRLSH PVC insulated copper cable 1100 volts grade multi stranded, sheathed conductor in PVC conduit of suitable sizeincluding 4 sq mm multi-strand FRLSHPVC insulated copper wire for earth continuity conductor connected to common earth dolly complete and making good disturbed surface complete incl taking out old unserviceable submain wiring of any type.Note:- Cost of PVC conduit, cutting chases on walls and making good disturbed wall surfaces including finishing with cement mortar (1:4) matching with the existing shade / tint are deemed to be included in the rates quoted. |
| 146 | Supply and laying of DWC (double wall corrugated) Pipe in cable protection of size 40mm dia all complete as specified and directed. |
| 147 | Supply and lay 3 layer ( inner antimicrobial, outer UV stabilized) ISI marked,IS-15801, PP-R pipes SDR 7.4 (PN-16) and PP-R plain fittings in trenches/walls/cellings or laying in floors complete of size outer dia 63 mm ,including all necessary fitiings to be considered all as specified and directed by Engr-in-Charge. |
| 148 | M&L for Installation of Pumping sets, centrifugal, electric driven,of capacity 5 HP make KirloskarKDS 515+, 5 HP, Three Phase, 400 Volts, Size 100mm X 100mm inclusive of outdoor starter panel having 63Amp 4P MCBvoltmeter with selector switch and ammeter,suitable 3 core copper cable ,outdoor protection structure for pumping set and PCC foundation all complete as specified and directed. |
| 149 | Supply and fix Sluice Valve, flanged of class 1.6 PN, 65 mm complete as specified and directed. |
| 150 | Supply and fix Non Return Sluice Valve, flanged of class 1.6 PN, 65 mm complete as specified and directed. |
| 151 | Supply and fix Foot Valve conforming to IS 4038, 65 mm all complete as specified and directed. |
| 152 | M&L for construction of valve chamber1000 x 1000 x 1000 mm internal dimensions,3 mm thick MS sheet cover with 2 Nos MS hinges welded to angle iron frame of 40mm x 40mm x 5 mm thick with lifting hook and locking arrangement complete with necessary earth work, brick work in CM (1:6), 230 mm thick,PCC bed (1:4:8) type D2 150 mm thick, cement plastering, finishing 15 mm thick in CM (1:4) and applying a coat of black bituminous paint to the steel surfaces all as specified and directed at site. |
