|
| 1 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 sqm each complete all as specified and as directed(unit rate shall be inclusive of demolition of cement concrete blocks for embedding hold fasts complete.) |
| 2 | Taking down shutters of any description exc 1 sq. m and not exc 2 sq. m each .complete all as specified and directed. |
| 3 | Taking down chowkats of frames wth shutters (without taking out off shutters from the frame) exc 1.5 sqm and n exc 4.00 sqm each including hold fasts and removing the same from site complete all as specified and as directed. (unit rate shall be inclusive of demolition of cement concrete blocks for embedding hold fasts complete.) |
| 4 | S & F pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.25 mm thickness, size 105 mm X 60 mm, Profile C, single rebateor moreincluding hinges, mortar guards, lock strike plate, shock absorbers complete all as specified and as directed. |
| 5 | S & F pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.25 mm thickness, size 125 mm X 60 mm, Profile C, single rebateor moreincluding hinges, mortar guards, lock strike plate, shock absorbers complete all as specified and as directed. |
| 6 | M & L for plain, solid, straight chowkats and frames made out of timber species of group I as per IS 12896: 1990 and first grade as per IS 4021: 1995, wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed. |
| 7 | M & L for 35 mm thick,Factory madetimber species of super group and durability class I as per IS 12896: 1990 and first grade as per IS 1003 (Part-1): 2003, factory made, glazed and skeleton shutters, open rebated and prepared to receive glass, wire gauze, etc. (without sash bar), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part-I section 8 Clause 8.24 (a) complete all as specified and as directed by the Engineer-in-Charge. |
| 8 | S & F 35 mm thick, timber species of super group and durability class I as per IS 12896: 1990 and first grade as per IS 1003 (Part-1): 2003, factory made, panelled shutters (two panels) with lock rail and panel of 12 mm thick veneered particle board, Grade -I, Type -I (solid core, general purpose), designation (SO GP-I) conforming to IS 3097 supplied and fixed to chowkhats. The size of style and rail as per IS 1003 (Part I) kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 9 | S & F 100 mm medium weight mild steel butt hinges made out of cold reduced low carbon steel or hot rolled carbon steel as per IS 1341: 1992 complete all as specified and as directed. |
| 10 | S&F 150mm aluminum extruded aluminium alloy handles (fabricated type) anodised of mat finish not be less than Grade AC 10 of IS 1868 : 1996 complete all as specified and as directed. |
| 11 | S & F aluminium alloy sliding door bolts with hasp, staple and fixing clips of sheets, or extruded sections and fixing bolts and sliding bolts of extruded sections of aluminium alloy, 300 mm long, anodized to a bright natural, mat finish not be less than Grade AC 10 of IS 1868 : 1996 complete all as specified and as directed. |
| 12 | S & F aluminium barrel tower bolts with barrel and bolt of extruded sections of aluminium alloys, 150 mm long, anodized finish not be less than Grade AC 10 of IS 1868 : 1996 with transparent anodic film complete all as specified and as directed. |
| 13 | S & F Mild Steel Helical Door Spring 300mm long ordinary rat tail pettern inclduing roller and roller plate to be fixed toMS chowkhat with necessary welding work complete all as specified and as directed. |
| 14 | S &F 150 mm Floor door stopper of aluminiumalloy body and tongue, anodised,with hard drawn steel spring, fixed in floor complete all as specified and as directed. |
| 15 | S & F hot rolled medium and high tensile structural steel of grade E165 as per IS 15911: 2010 as in framed work such as grills, grating, etc., with ends of bars of shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework water tanks and similar work complete all as specified and directed by Engineer-in-charge. |
| 16 | M & L for preparation of new or previously untreated wood or wooden surfaces, of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 17 | Material and Labour for applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel and iron surface exceeding 10 cm in width or girth including preparation of surfaces complete all as specified and directed. |
| 18 | Materials and Labour for plain cement concrete (1:2:4) type B0 using 12.5 mm graded aggregate in lintels up to 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered anglesthroating,and roof padding as directed including necessary from work complete all as specified and directed. |
| 19 | S & Fin repair factory made steel windows with side hung shutters including projectingtype hinges with mild steel handle, and steel peg stay complete without glazing bars dovetailed or weldedand making good the disturbed wall surfaces in CM (1:2) or PCC (1:2:4) type B1( including necessary arrangements to fix the same in multy storey bldgs up to G+2 with safety measures ) complete all as specified and as directed. |
| 20 | S & F in repair factory made steel windows with side hung shutters including projectingtype hinges with mild steel handle, and steel peg stay complete with glazing bars dovetailed or weldedand making goodthe disturbed wall surfaces in CM (1:2) or PCC (1:2:4) type B1 ( including necessary arrangements to fix the same in multy storey bldgs up to G+2 with safety measures ) complete all as specified and as directed. ` |
| 21 | S & F for aluminium window shutters, side hung typewithout sash bars, aluminium sectionsweighing 0.55 kg/m includingnecessary joining cleats, glazing clips,rubber packing, anodised aluminiumsnap beading, screws, anodised aluminium fittings such as peg stays150mm long (1 no.). hinges type B-21100mm long (2 no.) suitable handle (1no.) completeallasspecified |
| 22 | S & F for aluminiumventilator shutters, side hung typewithout sash bars, aluminium sectionsweighing 0.55 kg/m includingnecessary joining cleats, glazing clips,rubber packing, anodised aluminiumsnap beading, screws, anodised aluminium fittings such as peg stays150mm long (1 no.). hinges type B-21100mm long (2 no.) suitable handle (1no.) completeallasspecified |
| 23 | Supply and fixing of aluminium sliding window three track with powder coating (minimum thickness of powder coating 50 micron) including following components / specifications complete all as specified and as directed.(i) Two leaf glazed sliding shutter and one leaf gauged (fly proofing) sliding shutter with andincluding three track frame(ii) Opening of windows exceeding 0.90Sqm but not exceeding1.50 Sqm(iii) Thickness and weight per metre length of aluminium frame and section of shutter all as shown on drawing.(iv) All vertical/ horizontal joints shall be of extruded aluminium section so as to avoid any play between jointed members.(v) All other accessories such as jointing cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws, etc(vi).Glazing with sheet glass 5 mm thick ordinary quality in panels of aluminium windows, , etc. fixed with glazing clips, rubber beading and EDPM gasket(vii) Mild Steel grill shall be provided of size and design as shown on drawing (viii)Stainless steel wire cloth, 0.36 mm nominal dia of wire and avergae width of aperture 1.40 mm and fixed with stainless steel wire staples.(ix)Rest all as specified in drawing no CE (AF) SZ drawing No - AF/TD/242/15 (R), Sheet No- 1/6, 2/6, 3/6, 4/6, 5/6 & 6/6 dated 14 Feb 2017.Note for item ser No.to :-1. Sheet glass, MS grill and stainless steel wire mesh and all other items as shown on drawing shall be included in quoated rate.2. Mode of Measurement : Only opening size of window shall be measured. |
| 24 | M & L for4 mm sheetglasse ordinary quality, in squares exc 0.5 sqm each pane for windows including necessary arrangements to fix the same in multy storey bldgs up to G+2 with safety measures complete all as specified and as directed. |
| 25 | S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 26 | Supply and fix in repair for 2nd class HW plain fillets,square,rectangular, triangular in section exc 06 Sqcm but n exc 13 Sqcmgroup B, first or second choice as per IS 3629: 1986, wrought finished fixed with nail including dismantling the existing fillets all as specified and directed. |
| 27 | S & F 18/19 mm thick Veneered particle board, interior grade, solid core, with decorative veneers on both faces fix with screw to timber frame workas in shutter, shelves of cupboard including suitable beading to cover the exposed edges including taking down old boarding of any description and in any position complete all as specified and as directed. |
| 28 | S&F 150mm aluminum extruded aluminium alloy handles (fabricated type) anodised of mat finish not be less than Grade AC 10 of IS 1868 : 1996 complete all as specified and as directed. |
| 29 | S & F 50mm dia, polished, hard wood knobs fixed with screws complete all as specified and as directed |
| 30 | S & F 75 mm medium weight stainless steel butt hinges made out of cold reduced low carbon steel or hot rolled carbon steel as per IS 1341: 1992 complete all as specified and as directed. |
| 31 | Supply and Fix, solid PVC door frame of size 50 mm X 47 mm made out of 5 mm Prelam PVC sheet reinforced with MS square tube, fixed in opening all as specified and directed. |
| 32 | Supply and Fix, factory made solid panelprelam PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded prelam PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail: Panelling of both sides plain PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, fixed to door frame complete all as specified and directed. |
| 33 | S & F aluminium barrel tower bolts with barrel and bolt of extruded sections of aluminium alloys, 125mm long, anodized finish not be less than Grade AC 10 of IS 1868 : 1996 with transparent anodic film complete all as specified and as directed. |
| 34 | S & F 100 mm medium weight stainless steel butt hinges made out of cold reduced low carbon steel or hot rolled carbon steel as per IS 1341: 1992 complete all as specified and as directed. |
| 35 | S&F 150mm aluminum extruded aluminium alloy handles (fabricated type) anodised of mat finish not be less than Grade AC 10 of IS 1868 : 1996 complete all as specified and as directed. |
| 36 | M & Lfor 3mm thick, sheet glass ordinaryquality,glazing with oil putty in square n exe 0.5 Sqm in each pane including hacking out old broken glass from metal frame and punching and drilling out old glazing pins / spring clips and providing and fixing new ones complete all as specified and as directed. |
| 37 | S & F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 38 | Supply and Fix 25mm dia stainless steel tublar type curtain road complete all as specified and as directed |
| 39 | Material and labour for structural timbers of group B, first or second choice as per IS 3629: 1986, clean sawn in scantlings and timber framed and fixed complete including dismantlingframe work timber scantling 40 Sqcm and over in sectioncomplete all as specified and as directed. |
| 40 | S& F Solid PVC Wall Lining consisting of 5mm thick prelam colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per direction of Engr in charge ,with and including taking down existing wall panneling ,complete all as specified and as directed |
| 41 | Materials and Labourfor,anodised aluminium snap gridframework for false ceiling,size of grid 605 mm x 605 mm as per clause 10.38 of SSR Part-I (2009) including 6 mm thick, high pressure steam cured (HPSC) non asbestos fibre cement building boards fixed or laid to aluminium framework with screws and including dismantling existing wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness including cover fillets, complete all as specified and directed. |
| 42 | S & F in repair exposed type hydraulically regulated door closers, universal closer, bottle type (type A), Designation No. 3, suitable for 61 kg to 80 kg mass of doors & 851 mm to 1000 mm width of door, aluminium alloy non porous body and black plate, aluminium alloy piston or pack piston/ pillion, anodized finish not be less than Grade AC 15 of IS 1868 : 1996 with transparent anodic film as per IS 3564: 1995 complete all as specified and as directed. |
| 43 | S & Fin repairaluminium alloy sliding door bolts with hasp, staple and fixing clips of sheets, or extruded sections and fixing bolts and sliding bolts of extruded sections of aluminium alloy, 300 mm long, anodized to a bright natural, mat finish not be less than Grade AC 10 of IS 1868 : 1996 complete all as specified and as directed. |
| 44 | Supply and fix in repair Brass type 4 lever mortice door lock for fixing in aluminium door/ wooden door including necessary grooving, screwing in aluminium door and aluminium frame for adjusting or fixing of mortice door lock complete all as specified and as directed. |
| 45 | S & F in repairs aluminium barrel tower bolts with barrel and bolt of extruded sections of aluminium alloys, 150mm long, anodized finish not be less than Grade AC 10 of IS 1868 : 1996 with transparent anodic film complete all as specified and as directed. |
| 46 | S & F in repairs aluminium barrel tower bolts with barrel and bolt of extruded sections of aluminium alloys, 100mm long, anodized finish not be less than Grade AC 10 of IS 1868 : 1996 with transparent anodic film complete all as specified and as directed. |
| 47 | S & F in repair for Mild Steel Helical Door Spring 300mm long ordinary rat tail pettern inclduing roller and roller plate to be fixed toMS chowkhat with necessary welding work complete all as specified and as directed. |
| 48 | Materials and Labour for,4 mm thick, Asbestos cement cement designer (primered) building boards, fixed to timber framework with screws in ceiling flat or sloping including dismantling existing wall and ceiling boards (fibre,pulp,insuration,etc.) insulation boards/slabs/blankets,any thickness, including cover fillets, complete all as specified and directed. |
| 49 | Materials and Labour for rendering 8 mm thick, cement plaster, in cement mortar (1:4) mixed with water proofing compound as per manufactures instructions over and including 12 mm thick backing coat in cement mortar (1:4) on fair faces of brick work or concrete surface in walls, complete all as specified and directed.Note: - (Water proofing compound will be measured and paid separately) |
