|
| 1 | Excavation in foundation in ordinary soil (loam clay or sand) including lift upto 1.50 meter and lead upto 30 meter and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of sur-plus earth as directed by the Engineer incharge up to a distance of 30 meters from the foundation trenches. |
| 2 | Providing and laying in cement concrete 1:4:8 (1 cement : 4 coarse sand :8 graded Stone aggregate 40 mm nominal size) and curing complete,including cost of form- work, in foundation and floors. |
| 3 | Ordinary Soil Filling:Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. |
| 4 | Brick Work in Foundation:Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: 6.1.1 Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 5 | providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-iii) derived from natural sources : 4 graded stone aggregate 20mm nominal size derived from natural sources). |
| 6 | 230THK Brick Work in Super Structure :Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 6.4.1 Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 7 | Plaster on Internal Wall:12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) |
| 8 | Plaster on External Side:15 mm cement plaster on rough side of single or half brick wall of mix:1:4 (1 cement: 4 coarse sand) |
| 9 | Putty Work:Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 10 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) |
| 11 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding. |
| 12 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. |
| 13 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :(Two or more coats on new work an under coat of suitable shade with ordinary paint of approved brand and manufacture). |
| 14 | Earth work in filling with ordinary soil with approved material up to 100 meter lead , laying in cm thick compacted layers, breaking clods, dressing to required lines, curves , grade & section, watering and compaction to meet requirements as per MORD Specification . |
| 15 | Providing & laying granular sub-base by well graded material grade-I, spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotavator at OMC,and compacted with smooth wheel roller to achieve the desired density,complete as per Technical Soecification clause 401 of MORD [Sr No 4.1] |
| 16 | S/Laying of 80mm thick precast cement concrete I-shape Interlocking pane blocks with to layer of minimum 8mm thickness having plan dimension 200x(160+120mm) of O.P. cement ,smooth high gloss finish, skid resistant manufactured from ruber moulds thriugh vibro-compression mechanisam, the compressive strength of concrete paver block shall not be less than 30Mpa(M-30)and weight 5kg per nos.confiming to IS15658-2006 I/c cost material,with ablanket layer of 4.00 Cm thick fine sand labour,T&P and Vat ctc required for proper completion of the work.Si no-N.Item. |
| 17 | M-150 class Brick work in 1:4 cement and Coarse sand mortor. |
| 18 | 12mm thick cement plaster 1:4 in cement & coarse sand mortor. Please Enable Macros to View BoQ information |
