Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frame with shutters (without taking off shutters from the frame not exceeding 1.50 sqm each & removing to store etc complete all as specifid & directed by Eng-In-Charge. |
| 2 | Taking down chowkatswith shutters (without taking off shutters from the frame exceeding 1.50 sqm each but not exceeding 4 sqm) etc complete all as specifid & directed by Eng-in-Charge |
| 3 | Taking down shutters of any description exc 1 sqm and n exc 2 sqm each and removing from site etc complete all as specifid & directed by Eng-In-Charge. |
| 4 | S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fixed in opening as per specification complete all as specified and directed by Eng-in-charge. |
| 5 | Supply and fixing Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet of any colour as approved by Engr in charge on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification etc complete all as specified and directed. |
| 6 | Supply and fixing Aluminium handle cast type anodized 150 mm long complete all as specified and directed by Eng-in-charge. |
| 7 | Supply and fixing tower bolt Aluminum anodised of150 mm long complete all as specified and directed by Eng-in-charge. |
| 8 | Supply and fixing 100 mm long stainless stel butt hinges anodised and fixed complete all as specified and directed by Eng-in-charge. |
| 9 | Supply and fixing 4.0 mm thick Figured glass in glazing to aluminium door, window & partition including pad, gasket complete all as specified and directed by Eng-in-charge. |
| 10 | S&F 12mm thick toughened glass door with film of size exceeding 2 Sqm but not exceeding 4.0 Sqm including steel connectors, top and bottom pivots, stoppers, other fixtures required and all type of locking arrangement & brass handles fancy type 300mm long hole to hole on both side complete including taking down old unserviceable glass door complete all as specified and directed.Note:- Old glass door / partitions be removed and making good jambs, cills with the similar adjacent materials. |
| 11 | All as per serila item No. 10.00 here-in-before but sensor opreated door etc complete complete all as specified and directed. |
| 12 | S&F in repairs powder coated aluminum partition using 95.6mmx 44.8mm x 1.00-1.2mm frame work with 12mm thick exterior grade veneered particle board with decorative veneers on both face/5.5mm thick frosted glass including aluminum beading for fixing board each panel n. exc 1.2 sqm complete all as specified and directed by Engr-in-Charge. |
| 13 | S&F 5 mm thick frosted glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed by Engr-in-Charge. |
| 14 | S&F Sheet glass 5.5mm thick in glazing to aluminium/MS door, window & partition including pad, gasket complete all as specified and directed by Engr-in-charge. |
| 15 | S&F 6 mm thick coloured ACP(Aluminium Composite pannel) sheet using aluminium partition including joining cleats for fixing etc. Note : colour of sheet approved by GE. |
| 16 | S& F aluminiummotrice lock4 levers and 100 mm size for aluminium doors complete all as specified and directed by Engr-in-Charge. |
| 17 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of window n exc 2 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100x8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality,including all accesories i.e lock , handle, etc as directed by Engr-in-charge complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 18 | Supply and fixing factory made uPVC white colourdoor with4 Nos of 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.(Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape &size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100x8 mm size for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality and including all fittings i.e 02 x handles , multiple locks option ,door stopper etccomplete all as specified and directed by Engineer-in- Charge. (Glass shall be paid separately) |
| 19 | Supply and fixing factory made uPVC white colour openable glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazi ng bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mildsteel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc.Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusionwelded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality,including all fittings and accesories i.e lock ,handle etc all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid for separately) |
| 20 | S&F in repair CP curtain rods (medium weight) 20mm dia with fixing with decorative CP brackets, holders & knobs etc fixed complete all as specified and directed by Engr-in-Charge. |
| 21 | Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed. |
| 22 | M&L for Brick work using Old size burnt clay bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6)etc complete all as specified and directed by Engineer-in-Charge. |
| 23 | All as per serial item No 22.00 here-in-before but except brick only complete all as specified and directed by Engineer-in-Charge. |
| 24 | Taking down cement plaster on brick/stone walls etc including racking out joints, haking for key, scrubbing down with water etc. complete all as specified and directed by Engineer-in-Charge. |
| 25 | M&L for rendering 10 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces, finished surface even & fair without using extra cement internal surface etc complete all as specified and as directed by Engr-in-Charge. |
| 26 | M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces, finished surface even & fair without using extra cement external surfacer height upto G+2 Story Bldg complete all as specified and as directed by Engr-in-Charge. |
| 27 | M&L for rendering 5mm thick in CM 1:3 on fair faces of brick work or concrete surfaces, finished surface even & fair without using extra cement on ceiling surfaces complete all as specified and as directed by Engr-in-Charge. |
| 28 | M&L for Providing 1.0mm to 1.5mm thick dune plaster, ready mixed product with natural stone granules, minerals in partical size of 400-600, 600-800, 1000-1200microns consisting of excellent synthetic/ acrylicbinder anti cracking, anti foaming, anti fungal, anti rusting agent and applied directlely over the cement plaster/ stone surface over a coat aof base coatincluding necessary steel scaffolding work , repair to plaster in CM 1:4 if reqd, complete all as sepecified and directed. |
| 29 | Supplying and applying, SmartCare Damp Block 2K, two component elastomeric acrylic polymer modified cementitious waterproofing coating, having 80 % elongation as per ASTM D412, resisting 5 bars hyrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2mm as per ASTM 4548.5. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc., complete as per manufacturers specifications. Sprinkle sand at 10-15 gram per sqft for better grip with plaster complete all as specified and directed by Engineer-in-Charge. |
| 30 | M&L for preparation of new plastered surfaces of walls and applying two coats oil bound distemper over a coatof chalk whiteningprepartory to distemper completeall as specified and directed. |
| 31 | M&L for preparation of newly plastered surfaces on ceiling and applying three coats of white wash on ceiling complete all as specified and directed by Engr-in-Charge. |
| 32 | M&L for complete removal of existing treatment and preparartion of old surfaces of walls and applying two coats of APEX of Dark Shade on walls for height upto G+2 Story Bldg complete all as specified and directed by Engr-in-Charge. |
| 33 | M&L for preparartion of new surfaces of walls and applying two coats of Exterior grade weather proof distemper on walls for height upto G+2 Story Bldg complete all as specified and directed by Engr-in-Charge. |
| 34 | Dismantiling floor, hearth or wall tiling including cement motar bedding(but not backing ) removing serviceable tiles to store and rubbish off the premishes complete all as specified and directed by Engr-in-Charge. |
| 35 | M&L for glazed ceramic coloured tiles in vertical surface 1200mmx600mm of premium quality 9-10mm thick set and jointed in neat tile adhesive as per direction by Engr-in-charge mixed with cement slurry, clips and pointed in coloured cement to match incl 10mm thick renderingin cement mortor 1:4 including joint grouting in epoxy resin for skirting /dado finishes complete all as specified & directed by Engr-in-Charge. |
| 36 | M&L for coloured Non-skid Ceramic tiles 7 to 8mm thick of premium quality of size exceeding 0.18 sqm but n. exceeding, 0.38 sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement and sand mortor 1:4 for layiong floor finishes complete all as specified & directed by Engr-in-Charge. |
| 37 | M&L for Double Charge Light shade vitrified ceramic tiles 9 to 10mm thick (Square/ rectangular) polished,area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in paste pigmented to tile shade over and including 15mm thick cement and sand screed (1:4) complete all as specified and directed. |
| 38 | All as per serial item No. 37.00 here-in-before but as in skirting over 10 mm cement and sand mortar backing (1:3) complete all as specified and directed. |
| 39 | Taking down steel tubing and connections 15 mm bore tube complete all as specified and directed. |
| 40 | Taking down steel tubing and connections 20 mm bore tube complete all as specified and directed. |
| 41 | Refixing old steel tubing and connections in new or old position (walls, ceiling , floors, etc.) 15 mm nominal bore complete all as specified and directed by Engr-in-charge. |
| 42 | Refixing old steel tubing and connections in new or old position (walls, ceiling , floors, etc.) 20 mm nominal bore complete all as specified and directed by Engr-in-charge. |
| 43 | S&F GI tubes medium grade, with all fittings and fixed complete to wall and ceiling/floor 15mm bore complete all as specified and directed by Engr-in-Charge. |
| 44 | S&FGI tubes medium grade, with all fittings and fixed complete to wall and ceiling/floor 20mm bore complete all as specified and directed by Engr-in-Charge. |
| 45 | Labour only for disconnecting existing water tank, setting asides for repair after removing all scale and dirf etc from tanks and mouth and reconnecting and re-fixing in position of capacity exceeding 500 ltr and n.exc. 1000 ltrs in all necessary GI fittings for re-fixings as socket/tank nipple etc (includingwriting with white paint date of cleaning) complete all as specified and directed by Eng-in-charge. |
| 46 | S&F rotational moulded polyethylene water storage tank 750 Litre capacity in white colour (cylindrical vertical with closed top) hoisted and fixed in position with all necessary GI fittings complete all as specified in SSR Part-I including dismantling water tank complete all as specified and directed by Engr-in-Charge. |
| 47 | S & F in repair 20mm dia PTMT ball PVC valve, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed by Eng-in-charge. |
| 48 | S&F in repair brass 20mm Gate valves, high pressure, with polytheene float and flynut complete, screwed for iron pipe orr brass ferrule and fixed. |
| 49 | Taking down eaves gutters and rain water pipes, soil, waste and vent pipe ( any size or pattern) , including all fittings , heads, shoes, bends, swan necks, etc., including cleaning for refixing ( measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed. |
| 50 | Supply and fixing PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or fixed to wall of 110 mm bore complete all as specified and directed by Engr-in-Charge. |
| 51 | Supply and fixing PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or fixed to wall of 75 mm bore complete all as specified and directed by Engr-in-Charge. |
| 52 | S&F PVC (SWR) bends any radius of 110 mm bore complete all as specified and directed by Engr-in-Charge. |
| 53 | S&F PVC (SWR) bends any radius of 75 mm bore complete all as specified and directed by Engr-in-Charge. |
| 54 | S&F in repair 15mm bore CP bib tap long body cast copper alloy fancy type screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engr-in-Charge. |
| 55 | S&F 15mm bore in repair CP WHB mixerFancy typelong neck for center hole wash basin 30cm length copper alloy along screwed down high pressure with hot & cold with long screwed shanks and fly nuts screwed for GI pipe complete all as specified and directed by Engr-in-Charge. |
| 56 | S&F in repair CP anglefancy type 15 mm bore high pressure screwed for iron pipe complete all as specified and directed by Engr-in-Charge. |
| 57 | S&F in repair 2 way 15mm CP angle fancy type 15 mm bore high pressure screwed for iron pipe complete all as specified and directed by Engr-in-Charge. |
| 58 | S&F in repair 2 way 15mmCP fancy bib tap 15 mm bore high pressure screwed for iron pipe complete all as specified and directed by Engr-in-Charge. |
| 59 | S & F in repair of PVCconnection pipe 15 mm size with nuts, washers of length 450 mm pipe complete all as specified and directed by Engr-in-Charge. |
| 60 | S&F in repair vitreous china wash down, water closet pan (pedestal pattern single piece), white including fixing bolts and connection to flush pipe and drain out going pipe and closet seat cover black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engr-in-Charge. |
| 61 | S&F in repair vitreous chinacounter top wash hand basin, white, size and design as approved by GEincluding waste pipeand brackets butexcluding tapes, chain and plug etc complete all as specified and directed by Engr-in-Charge. |
| 62 | S&F in repair CP Jet spray butter fly design fixed on EWC with stanless screw as approve complete all as specified and directed by Engr-in-Charge. |
| 63 | S&F in repair CP Health faucet with stand fixed on wall in CP hose pipe 1 mtr length and stainless steel screw as approve complete all as specified and directed by Engr-in-Charge. |
| 64 | S&F in repairs peg set of five of stainless steel bright finished, fixed complete all as specified and directed by Engr-in-Charge. |
| 65 | M&L for Bands, straps, supports or stays, for rainwater, ventilating pipes, including bolts, if required hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming toFe-290 Gde-E-165 complete all as specified and directed. |
| 66 | S&F in repairs towel rail chromium plated 20mm dia ‘D’ type, 600mm long complete all as specified and directed by Engr-in-Charge. |
| 67 | S&F in repairs Bevelled edge looking mirror of 5 to 6 mm thick selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to SS plugs with chromium plated brass screws and cup washers complete all as specified and directed by Engr-in-Charge. |
| 68 | S&F in repair Glass shelf 450mm long x 100 mm wide includingbrackets fixed to wall with sleeves and screws complete all as specified and directed by Engr-in-Charge. |
| 69 | S&F in repair corner glass shelf of size 300X300 mm including brackets fixed to wall with pvc sleeves and stainless steel screw complete all as specified and directed by Engr-in-Charge. |
| 70 | S&F in repairs vitreous china urinal Half stall type, white incl CP spreader screwed for iron pipe and fixed complete including providing and fixing plugs with and including 60mm long brass screws, pointed around urinal back in cement; fixinf discharge pipr, flush pipe, grating and union for discharge complete all as specified and directed by Eng-in-Charge. |
| 71 | S&F in repair stainless steel grating 100mm bore size fixed with white cement complete all as specified and directed by Engr-in-Charge. |
| 72 | M&L for cement concrete tiles 25cm x 25cm x 22 mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors/roof, and cut and polished including 20 mm screed bedding layer in CM 1:4 complete all as specified and directed. |
| 73 | Dismantling of ceiling boards/panelling/ boards of any type and any thickness including cover fillets and timber frame work complete complete all as specified and directed. |
| 74 | S&F 605X605 mm size of grid GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended form soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section ( not exc 1.2 m length ) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Hangers 6 mm dia. GI (up to 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GIflat 40X 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long etc complete all as spd and as directed. Incl providing and fixing coloured designer board(everest artescape) 4 mm thick in ceiling fixed with screw as per manufacturer\"s instructions complete all as specified and directed by Engr-in-Charge. |
| 75 | S&F GI lay in metal ceiling system of 600 x 600mm module which includes provides and fixing \"C\" wall angle of size 20 x 30 x 20 mm of 0.5 mm thick prepainted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm c/c , suspending the main main C carrier os size 10 x 38 x 10 mm made of GI steel 0.7mm thick from the soffit with help of soffit cleat 37 x 27 x 25 x 1.6mm, rawl plugs of size 38 x 12 mm and C carrier suspension clip and main carrier bracket at 1000mm c/c. Inverted triangle shaped spring Tee having height of 24mm and width of 34 mm made of GI steel 0.45mm thick is then fixed to main C carrier and in direction to perpendicular to it at 600mm c/c with help of suspension brackets. Where ever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120gm/sqm(both side inclusive, fixing with clip in tiles into spring T with :- |
| 76 | S&F GI metal ceiling lay in plain beveled edge global white colour tiles of size 600 x 600mm and 0.5mm thick with 25mm height, made of GI sheet having galvanizing of 100gm/sqm (Both side inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending complete all as specified and directed by Engr-in-Charge. |
| 77 | S&F GI metal ceiling lay in plain beveled edge global white colour tiles of size 600 x 600mm and 0.5mm thick with 25mm height, made of GI sheet having galvanizing of 100gm/sqm (Both side inclusive) and 20% perforation area with 1.8mm dia holes and having NRC of 0.5 electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation complete all as specified and directed by Engr-in-Charge. |
| 78 | Dismantling of brick tiles or terracing tiles single layer on roofs, complete all as specified and as directed. |
| 79 | Demolition of cement concrete (unreinforced ) in ground floors and pavings not exceeding 15 cm thick above or below ground level complete all as specified and directed. |
| 80 | M&L for Providing, cement concrete (1:2:4) type B0 using 12.5mm graded stone aggregate in coping, coving, roof padding, padding in sunken slab, complete all as specified and directed by Engr-in-Charge. |
| 81 | M&L for APP based polymeric membrane minimum weighing 3 Kg/sqm and minimum 3mm thickreinforced with polyster non wove fabric (wt. notless than 150 gms/sqm) land on primed surface by forced application complete all as specified incl Priming surfaces and applyingnormal treatment (for moderateconditions) using glass fibre base bitumen felt, grade 2 solvent @ 0.4 kg /Sqm incl Wire brushing and cleaning top surfaceof tiles, lime terracing or cement concrete, including flashings and junction ofparapets, etc., and surface painting, witha layer of blown grade bitumen of anypenetration applied hot @ 1.7 kg per sq.m, blinded with grit or pea size gravel @0.006 cu.m per sq.m, and lightly tampered etc complete all as specified and as directed. |
| 82 | Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for including reinforcement cut as required to facilitate demolition complete all as specified and directed. |
| 83 | M&L for 50 mm thick sand stone slab as in chajja/cover slab set and jointed over supports in CM (1:4) complete all as specified and directed. |
| 84 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 85 | M&L for Mild steel TMT bars 6 to 8mm dia cut to length bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified. |
| 86 | M&L for reinforced cement concrete (Nominal Mix) (1:2:4) type B1 using 20mm graded crushed stone aggregate in chajjas and the like complete all as specified & as directed.Note:- Reinforcement & formwork shall be measured and paid for separately. |
| 87 | M&L for reinforced cement concrete (Nominal Mix) (1:2:4) type B1 using 20mm graded crushed stone aggregate as in slab supported on walls, beams, columns in floors, roofs, landings, cantilevers, bressummers, lintel over 1.5m span and the like complete all as specified & as directed.Note :- Reinforcement & formwork shall be measured and paid for separately. |
| 88 | M&L for Formwork to soffits of chajjas and such as roof slabs, landings and similar work: not exceeding 200 mm thick (Horizontal or sloping) for fair finished flat surfaces of concrete complete all as specified & directed by Engr-in-Charge. |
| 89 | M&L for Formwork to edges of concrete flats, floor slabs, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc. 10cm but n exc. 20cm wide for fair finished flat surfaces of concrete all as specified & directed by Engr-in-Charge. |
| 90 | M&L for 16-18mm thick Granite (of any type) work (table rubbed and polished) for Shelves (veneering to wall) including 12mm thick plaster in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified & directed by Engr-in-Charge. |
| 91 | M&L for glass partition for urinals of fancy type as approved by GE. |
| 92 | S&F in replacement 18 mm thick PVC Celuka board of single side prelam/rigidlam color fixed with screws, solvent cement/adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinet, cupboard shutters/frames, (Density- 575 to 600 Kg/ CBM), complete all asdirected by Engineer-in-Charge. |
| 93 | S&F in replacement 18 mm thickPVC Celuka board ofplain white color both side fixed with screws, solvent cement/ adhesive to make kitchen cabinet/cupboard sides, top and bottom and shelves inside the cabinets, cupboard shutters/frames (Density- 575 to 600 Kg/ CBM), complete all asdirected by Engineer-in-Charge. |
| 94 | Taking down carefully existing unserviceable/perished surface conduit/concealed conduit/ batten/casing caping aluminium/copper point wiring any type for light, fan, bell, socket, power point etc complete including all fixtures and fittings such as batten/conduit/casing caping, switches, sockets, ceiling rose, pendent holder, lamp holders, bracket holders, light fittings, top sheet covers, fan regulators, wooden boxes, MS sunken boxes, etc and making good the disturbed surfaces of wall, floors, ceiling, etc to match with the adjoining surfaces, complete all as specified and as directed. |
| 95 | M&L for Modular point wiring for one light/fan/bell/buzzer point controlled by one, one way switch with 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLSH cable 1100 Volt grade (ISI marked) including 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLSH cable 1100 Volt grade (ISI marked) as continuous earth wire in green colour to common earth and connected to earth dolly laid/drawn into and including non-metallic rigid PVC concealed conduit (medium duty, ISI marked, not less than 20mm dia) with all fittings such as tee, bends, etcall as per IS, terminated in & including new modular metal flush boxes of requisite module concealed in wall for mounting fittings like modular switches, sockets, regulators etc with and including modular cover plates with frame of requisite module, complete all as specified and as directed.Notes : (i) Cost of cutting/leaving forming chases for conduits, sinking for modular metal flush boxes and making good in CM 1:4 shall deemed to be included in quoted rate of this item. (ii) The quoted rates of this item shall deemed to include for modular metal flush boxes of requisite module and modular cover plates with frame of requisite module of colour as approved by GE. |
| 96 | All as per serial item No. 95.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on same board with other switches complete all as specified and directed. |
| 97 | All as per serial item No. 95.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on independent board complete all as specified and directed. |
| 98 | All as per serial item No. 95.00 here-in-before but for one 3 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 2.5 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade (ISI marked) including 2.5 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade (ISI marked) as continuous earth wire in green colour complete all as specified and directed. |
| 99 | S&F in repairs Modular Bell push flush type 6 Amp, 1 module, 230 volts complete all as specified and directed. |
| 100 | S&F in repair modular type 6A one way SP switch 1 module confirming to IS: 3854-1997 with finger proof terminal complete all as specified and directed. |
| 101 | S&F in repair modular type 16A one way SP switch 1 module confirming to IS: 3854-1997 with finger proof terminal complete all as specified and directed. |
| 102 | S&F in repair modular type 2/3 pin 6 Amps socket 2 module conforming to IS : 1293-2005 complete all as specified and directed. |
| 103 | S&F in repair modular type 2/3 pin 16 Amps socket 2 module conforming to IS : 1293-2005 complete all as specified and directed. |
| 104 | S&F in repairs Bell ‘Ding Dong’ / ‘Multi Music’ Type, AC, 230 Volts, ISI marked, complete all as specified and as directed. |
| 105 | S&F in repairs modular type 120W step fan regulator of 2 module size conformng to IS : 11037-1984 complete all as specified and directed. |
| 106 | S&F in repair ceiling rose three terminal, 230 Volts PVC / Polycarbonate body, complete all as specified and directed. |
| 107 | S&F in repair Fency Jumbo Batten holder metal ring suitable for LED bulb of 10 Watt including LED bulb base B22 of capacity 10 watts not less than 700 lumens output at 6500 K colour temp, complete all as specified and directed. |
| 108 | Supply and fixing in repair wall light stainless stell, mirror finish, Frosted glass, with Bulb type E 27,(115x120x255mm) (lxwxh) single phase 220V including taking down Down complete all as specified and directed. |
| 109 | Supply and fixing in repair LED luminaire 600 mmx600 mm, 40 watt, 220 V, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete including taking Down complete all as specified and directed. |
| 110 | Supply and fixing in repair round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 111 | S&F in repair LED (1.2 M) smartbrite extra batten made of CRCA sheet housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumen/20 watt at a minimum system efficacy of 2000 lumen per 20 watt and total power consumption not more than 20 watt including driver of capacity 10 KA. it has a rated system life time of 25000 burning hours at L70 and should have a colour temperature of 6500 K, CRI>80, THD<10% AND PF>0.95 complete all as specified and directed. |
| 112 | S & F in repair of LED (0.6 M)/ 2 ft smartbrite extra batten made of CRCA sheet housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 1150 lumen/10 watt at a minimum system efficacy of 1150 lumen per 10 watt and total power consumption not more than 10 watt including driver of 5 KA capacity. it has a rated system life time of 25000 burning hours at L70 and should have a colour temperature of 6500 K, CRI>80, THD<10% AND PF>0.95 complete all as specified and directed. |
| 113 | S&F in repair Security Light of 60 watts of new generation energy saving & environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having IP65 protection and impact resistance of IK07 with 10KV Built -in-Surge Protection Devision,should have a colour temperature of 6500 K, CRI>80, THD<10% AND PF>0.95 including suitable pipe, clamps, nut and bolts for mounting the light all as specified and directed |
| 114 | S&F in repair LED bulk Head 10W HEXA environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagon bulk head back-lit LED luminaire comprising of high brightness LEDs with all connected accessories all as directed and specified. |
| 115 | NOTES FOR LED LIGHT FITTINGS :(i) All LED light/luminare shall meet the provision laid down in IS - 16101, 16102 Part-I/II, 16103 Part-I, 16104, 16105, 16106, 16108/2012 and 15885 Part -II / Section 13.(ii) Contractor shall submit test report of LED street light fitting from Government accredited test laboratory for LM-79 and LM-80.(iii) Contractor has to furnish a replacement warranty of 05 years for LED light fittings complete including lamps from the date of completion of contract. The product will be replaced on site free of cost in the following case :-(a) Manufacturing defects.(b) Failure due to mechanical and electrical impact.(c) Drop in lumen (or lux at 1 m) below 90% of claimed values of lumen (or lux at 1 m) of the LED /Luminaries. |
| 116 | S&F in repair modular type 3/5 pin socket with one single pole MCB 20 Amp 230 Volts complete all as specified including concealing in wall suitable for AC and Domestic appliances complete all as specified and directed. |
| 117 | M&L for concealed submain wiring with two single core PVC insulated FRLSH multi stranded copper conductor cable of size 4.0 Sqmm drawing into and includingrigid non metallic PVC conduit, medium grade not less than 25 mm dia ISI marked ivory colour with all conduit fittings and fixing accessories and 4.0 Sqmm FRLSH multistranded copper conductor cable as continuous earth wire including taking down,cutting chasing and making existing colour on the wall complete all as specified and directed.(Note :- two runs of 4.0 Sqmm copper wire and one run of 4.0 sqmm copper earth wire alongwith PVC conduit shall be meausred as one unit) |
| 118 | M&L for concealed submain wiring with two single core PVC insulated FRLSH multi stranded copper conductor cable of size 06 Sqmm drawing into and includingrigid non metallic PVC conduit, medium grade not less than 25 mm dia ISI marked ivory colour with all conduit fittings and fixing accessories and 06 Sqmm FRLS-H multistranded copper conductor cable as continuous earth wire including taking down, cutting chasing and making existing colour on the wall complete all as specified and directed.(Note :- two runs of 06 Sqmm copper wire and one run of 06 sqmm copper earth wire alongwith PVC conduit shall be meausred as one unit) |
| 119 | M&L for concealed submain wiring with two single core PVC insulated FRLSH multi stranded copper conductor cable of size 10 Sqmm drawing into and includingrigid non metallic PVC conduit, medium grade not less than 25 mm dia ISI marked ivory colour with all conduit fittings and fixing accessories and 10 Sqmm FRLS-H multistranded copper conductor cable as continuous earth wire including taking down,cutting chasing and making existing colour on the wall complete all as specified and directed.(Note :- Two runs of 10 Sqmm copper wire and one run of 10 sqmm copper earth wire alongwith PVC conduit shall be meausred as one unit) |
| 120 | M&L for concealed submain wiring with four single core PVC insulated FRLSH multi stranded copper conductor cable of size 06 Sqmm drawing into and includingrigid non metallic PVC conduit, medium grade not less than 25 mm dia ISI marked ivory colour with all conduit fittings and fixing accessories and 06 Sqmm FRLS-H multistranded copper conductor cable as continuous earth wire including taking down,cutting chasing and making existing colour on the wall complete all as specified and directed.(Note :- Four runs of 06 Sqmm copper wire and one run of 06 sqmm copper earth wire alongwith PVC conduit shall be meausred as one unit) |
| 121 | M&L for concealed submain wiring with four single core PVC insulated FRLSH multi stranded copper conductor cable of size 10 Sqmm drawing into and includingrigid non metallic PVC conduit, medium grade not less than 25 mm dia ISI marked ivory colour with all conduit fittings and fixing accessories and 10 Sqmm FRLS-H multistranded copper conductor cable as continuous earth wire including taking down,cutting chasing and making existing colour on the wall complete all as specified and directed.(Note :- Four runs of 10 Sqmm copper wire and one run of 10 sqmm copper earth wire alongwith PVC conduit shall be meausred as one unit) |
| 122 | S&F in repair DBs factory made, 4 way sheet steel distribution boards double door, protection class IP-42 suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 200 Amps rating copper bus bar including taking down completeall as specified and directed. |
| 123 | S&F in repair DBs factory made, 8 way sheet steel distribution boards double door, protection class IP-42 suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 200 Amps rating copper bus bar including taking down completeall as specified and directed. |
| 124 | S&F in repair DBs factory made, 12 way sheet steel distribution boards double door, protection class IP-42 suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 200 Amps rating copper bus bar including taking down completeall as specified and directed. |
| 125 | S&F in repair MCB \"C\" series SPN 32 amps having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified and directed. |
| 126 | S&F in repair MCB \"C\" series single pole 6 to 32 amps having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified and directed. |
| 127 | Supply and fixing in repair Isolator TPN 40 Amp complete all as specified and directed. |
| 128 | Supply and fixing in repair Isolator TPN 63 Amp complete all as specified and directed. |
| 129 | Supply and fixing in repair Isolator TPN 100 Amp complete all as specified and directed. |
| 130 | M&L in replacement of Earthing complete with galvanized steel earth plate electrode 60cmx60cmx 6 mm thick buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 meter below normal ground level, connected to galvanised earth strip 25x4 mmby means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in elecrical plate No 3 of MES SSR Part I connected to main DB or main control board all as specified and testing on completion including provision of earth wire portected by galvanised iron 40 mm bore light grade pipe with all fittings from the earth electrode fixed along pole with and including 25x4mm flat iron clamp, bolts, nuts and washers and watering pipe shall be 20 mm bore GI medium grade from Top of the earth electrode to bottom of the earth pit and earth electrode shall be surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides including all excavation and earth work in any type of soil and removal of soil upto 50 metre, PCC pit with pre-cast RCC cover with handle with 10mm dia, charcoal/salt, funnel, CI frame etc complete all as specified and directed. |
| 131 | Supply and fixing exhaust fans 300 mm sweep metallic body, heavy duty, four blade, double ball bearing, 1400 RPM, minimum air delivery discharge 1710 CMH suitable for SP, 230/250V, 50 Hz AC supply with protective bird guard with louver shutters including grouting of frame in walland connecting with and including 3 run 1.5 Sq mm single core, PVC insulated but unsheathered FRLSH multistranded copper conductors cable from ceiling rose to exhaust fan including taking down complete all as specified and directed. |
| 132 | Supply and fixing exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm including taking down complete all as specified and directed. |
| 133 | Supply and fixing ceiling fans complete with blades, down rods,remote, electronic regulator and accessories, 230 Volt, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 or more BEE Five star rated with brushless direct current motor(BLDC) complete all as specified & directed.Note : The old unserviceable C/Fan shall be deposited in MES store yard. |
| 134 | S&F in repair VTPN DB 4 Way Double Door with MCCB incommer complete all as specified and directed. |
| 135 | S&F in repair MCCB 4 Pole, 415 Volt, Adjustable type, 63 Amps with breaking capacity 36 KA including taking down complete all as specified and directed by Engr-in-Charge. |
| 136 | S&F in repair MCCB 4 Pole, 415 Volt, Adjustable type, 100 Amps with breaking capacity 36 KA including taking down complete all as specified and directed by Engr-in-Charge. |
| 137 | S&F in repair MCCB 4 Pole, 415 Volt, Adjustable type, 160 Amps with breaking capacity 36 KA including taking down complete all as specified and directed by Engr-in-Charge. |
| 138 | S & F in repair MCCB 4 Pole, 415 V, Adjustable type, 200 Amps with breaking capacity 36 KA including taking down complete all as specified and directed by Engr-in-Charge. |
| 139 | Supply and fixing in replacement of PVC conduit with Non Metallic Rigid PVC conduit, ISI Marked, conforming to IS 9537, medium grade of size 25 mm outer dia including all fittings/accessories like bends, elbow reducer, junction boxes, tee bell mouth, coupler lock, nuts, space bar saddles, pipe hooks etc complete all as specified and directed. |
| 140 | Supply and fixing in replacement of PVC conduit with Non Metallic Rigid PVC conduit, ISI Marked, conforming to IS 9537, medium grade of size 20 mm outer dia including all fittings/accessories like bends, elbow reducer, junction boxes, tee bell mouth, coupler lock, nuts, space bar saddles, pipe hooks etc complete all as specified and directed. |
| 141 | Cutting & Chasing required on brick wall not exceeding 10 cm girth to conceal the cable /PVC conduit and making good to disturbed surface with cement and sand mortar 1:3 including facing / finishing where as requiredincluding colour wash to match with existing surfaces complete all as specified and directed. |
| 142 | Supply and laying in replacement of LT cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sqmm 3.5 core complete all as specified and directed. |
| 143 | Supply and fixing in repair 35 watt Suspended LED Downlighter cool white,aluminiun body, fixture form ceiling complete all as specified and directed. |
| 144 | Supply and fixing in repair LED track light metal 30W 360 Degree rotation ,high voltage protection, surge protection upto 4 kv warm white 2700K |
| 145 | Supply & fixing in repair track light channel material aluminium complete all as specified and directed. |
| 146 | Supply and fixing in repair LED Strip light with uniform brightness at 600 Lm/m and 120 LEDs per meter complete all as specified and directed. |
| 147 | Supply and fixing in repair driver for LED strip light complete all as specified and directed. |
| 148 | Material and labour for shifting outdoor unit aside 11/8.5 TR and placing back to original location complete all as specified and directed. Note : Any damage due to mishandling should be bear by the contractor without any extra cost. |
| 149 | Material and labour for taking down split AC by disconnecting all electric and refrigerant connection after restoring the refrigerant gas and refixing the same as original complete all as specified and directed. |
| 150 | Material and labour for refrigerant gas filling as existing complete all as specified and directed. |
| 151 | Supply and fixing in repair copper refrigerant pipe (suction and discharge) with niterate rubber for 1.5/2.0 TR Split AC as per existing size and specification complete all as specified and direced. Note : Suction,discharge and nitrate rubber measured as one unit |
| 152 | Supply and fixing in repair AC stand for outdoor unit 1.5/2.0 TR heavy duty complete all as specified and directed. |
| 153 | Supply and fixing detectors complying with and typecertified to EN-45 addressable type multisensor detectors with heat and smoke combination including taking down old unserviceable complete all as specified and directed. |
| 154 | S&F dual LED type response indicator including taking down old unserviceable complete all as specified and directed. |
| 155 | Supply and fixing Addressable manual call point break glass type with alarm LED complete having Surface or flush mounting Option fully complaint to EN54 with Back Box for Mounting Complete as required conforming to BS5839 Standards and Duly Approved by EN54/LPCB including taking down old unserviceable complete all as specified and directed. |
| 156 | Supply and fixing of fault isolator base with termination preferably after every 10-15 devices and shall be able to isolate electrical short circuit in the wiring etc. as required including taking down old unserviceable complete all as specified and directed. |
| 157 | S&F in replacement of 2 Loop Micro processor based 1 wire fault tolerant loop, required loop networkable type(each loop accessing99 detectors and 99 modules ) fire alarm/ detection control panel.The panel shall be able to givelocation ofall fire/fault conditions of addressable units via the address codes.Further, the panel must be able to automatically switch ON /OFF respective control modulewhen ever any alarm is triggered.The panel shall have rectifier, Loop cards, 80 character LCD unit to indicate Fire/Fault Signal with addresses. The Panel Shall be Sheet Steel Painted, sealed to IP30. The panel have provision to integrate with PA System. The panel shall have a built in power supply and battery charger along withmaintenance free 24 AH, 2x 12 volt SMF dry batteries capable of running for a minimum of 48 hours with battery charger complete as required. and conforming to BS5839 Standards and Duly Approved byEN54/LPCB. GSM Auto dialer intigration required. |
| 158 | Supply and fixing in repair Active Repeator panel with backlit LCD display,operation and appearance is identical to the FACPs built -in annunciator,initiate and end fire drill with single key complete all as specified and directed. |
| 159 | Supply, install, testing and commissioning Addressable electronic sounder cumstrobe complete as required and directed. |
| 160 | S&F in repair Electric siren system, AC, 415 V, 50 HZ, including necessary foundation and protection from rain water of DB range 65 to 120 measured at 1.5 mtrs with sound output variation of + 5 db for range 2 Kms installed at roof ofBldg including civil work & suitable canopy & neccessary foundation complete all as specified and directed. |
| 161 | Supply and fixing and drawing flame retardent low smoke, FRLS cables of 2 core 1.5 sqmm ATC cable unaurmored flexible/stranded bare copper conductor PVC insulated, multistranded twisted pair shielded cable 1100 volts grade drawn through in the surface / concealed conduit as required including cutting chasing for concelead Wiring & finished to good surface complete all as specified and directed. |
| 162 | Supply & fixing in repair of Addressable Type Loop Powered Sounder complete with Mounting Base as required conforming to BS5839 Standards and Duly Approved by EN54/LPCB complete all as specified and directed. |
| 163 | Supply & fixing in repair Output control module for Lift, Ahu, pressure fan/Exast fan etc. complete all as specified and directed. |
| 164 | Supply & fixing in repair input monitor module for FA panel intigration with fire fighting flow switch complete all as specified and directed. |
| 165 | Supply and fixing in repair 6 Watt wall mount CD Speaker including wiring complete all as specified and directed. |
| 166 | Supply and fixing in repair Beam Master detector with Transmitter and receiver with power supply units & Module complete all as specified and directed. |
| 167 | Supply and install in repair 250 Watt Amplifier with all power and speaker connection complete all as specified and directed. |
| 168 | Supply and install in repair microphone set table topwith flexible stem wireless complete all as specified and directed. |
| 169 | Supply and fixing MS conduit 20mmdia,16SWGstove enamelledboth internally and externally, steel conduit alongwith accessories in concealed / surface all as specifiedfor above cable complete all as specified and directed. |
| 170 | Supply and fixing MS conduit 25 mmdia,16SWGstove enamelledboth internally and externally, steel conduit alongwith accessories in concealed / surface all as specifiedfor above cable complete all as specified and directed. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
