|
| 1 | SCHEDULE \"A\" PART -I Taking down chowkhats or frames with shutter (without taking off shutter from the frame)exe 1.50but n. exc. 4sqm in each complete all as specified & directed. |
| 2 | Taking down shutter from the frame exc 1.00Sqm and n exc 2.0sqm each complete all as specified and as directed. |
| 3 | Taking down chowkhats or frames with shutter (without taking off shutter from the frame) n. exe 1.50 sqm in each complete all as specified & directed. |
| 4 | S&F for pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 125 x60 mm complete all as specified and directed. |
| 5 | S&F for pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 105 x60 mm complete all as specified and directed. |
| 6 | S&F 35mm thick Factory made Flush shutter solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed. |
| 7 | S&F 35mm thick 2nd class hard wood skeleton shutter open rebated & prepared to receive glass, gauge etc (with out sash bars) edges of framing plain,chamfered or rounded fitted with cut and mitred beads for securing glass, gauge etc complete all as specified |
| 8 | S&F Factory made Plain framed, panelled shutter 35mm thick (two panel) with lock rail & panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. 2nd Class HW rail & style of size as per IS: 1003 (Part I), kiln seasoned & chemically pressure treated complete all as specified and directed. |
| 9 | S &F in Repair 25mm dia mild steel chromium plated curtain rod fixing with brackets, stop, rollers complete as specified |
| 10 | S & FFactory made solidPVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification &drawing complete all as specified. |
| 11 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.complete all as specified and directed. |
| 12 | S&F 100mm size type B-21 Butt hinges, extruded aluminum alloy with galvanized MS sheet hinges pin anodized complete all as specified. |
| 13 | S&F 100 mm size, butt hinges, extruded medium weight cold rolled mild steeletc complete all as specified and directed. |
| 14 | S&F 75 mm size, butt hinges, extruded medium weight cold rolled mild steeletc complete all as specified and directed. |
| 15 | S&F 150mm size, aluminium anodised handle,fabricated type complete all as specified and directed.. |
| 16 | S&F 100mm size, aluminium anodised handle,fabricated type complete all as specified and directed.. |
| 17 | M&L 150 mm long mild steel, barrel tower bolts of extruded section etc complete. |
| 18 | M&L 100 mm long mild steel, barrel tower bolts of extruded section etc complete all as specified and directed. |
| 19 | S&F Mild steel sliding door bolts,250mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 20 | S & F in repairs 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete |
| 21 | S&F in repairs aluminium alloy Tubular towel rail 20mmdia chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed. |
| 22 | S&F 150mm size extruded aluminium alloy handles, fabricated type anodized complete all as specified . |
| 23 | S&F 200mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed. |
| 24 | S&F 150mm long aluminium anodized barrel tower bolts of extruded section complete all as specified . |
| 25 | S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified |
| 26 | S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples complete all as specified and as directed |
| 27 | S&F factory made Z sectionsteel windowwith side hung shutter frame includingprojecting/ boxtype hinge with steel handle and steel peg stay, ms tower bolt etc. completewith glazing bars , dovetailed or welded including a shop coat Red Oxide priming complete all as specified and directed. |
| 28 | S&F factory made Z sectionsteel window with side hung shutter frame includingprojecting/ boxtype hinge with steel handle and steel peg stay, ms tower bolt etc. completewithout glazing bars , dovetailed or welded including a shop coat Red Oxide priming complete all as specified and directed. |
| 29 | M&L framed work such as grills, grating, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways railing framework of water tank and siliar work all as specified and as directed. |
| 30 | M & L preparation of new wooden surface and applying two coats of synthetic enamel paint over a coat of pink primer exc 10 cm width or girth complete all as specified and as directed. |
| 31 | M & L for PCC type C-1 (1:3:6) using12.50mm graded stone aggreagate as in bed block for fixing of hold fast filling concrete in door frameincl necessary form work complete all as specified. |
| 32 | Taking down Shutters of any description n exc 1 sq. m each. complete all as specified and as directed. |
| 33 | Taking down Shutters of any description exc 2 Sqm each. complete all as specified and as directed. |
| 34 | Refixing the Shutters in same opening n exc 1 sq. m each. complete all as specified and as directed. |
| 35 | Refixing the Shutters in same opening exc 1 Sqm but n.exc 2 Sqm each. complete all as specified and as directed. |
| 36 | Refixing the Shutters in same opening n exc 2 sq. m each. complete all as specified and as directed. |
| 37 | M&L Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles using steel conforming to Fe-290 Gde-E-165complete all as specified and as directed. |
| 38 | M &L for Providing, cement concrete Type B1 (1:2:4) 20mm graded stone aggregate plinth courses, string courses, lacing courses, parapets andrailings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not providedfor in Item 04028, watertroughs and the like includingweathering,slightly roundedor chamfered angles andthroating, as directed |
| 39 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with puttty or fixed with beads, complete all as specified and as directed. |
| 40 | S&F3 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 sq.m. each pane . complete all as specified and as directed. |
| 41 | S&F3 mm thick sheet glass ordinary quality and glazing with oil putty in squareexc 0.5 sq.m. each pane . complete all as specified and as directed. |
| 42 | S&F 4.8 mm thick sheet glass ordinary quality and glazing with oil putty in squareexc 0.5 sq.m. each pane . complete all as specified and as directed. |
| 43 | S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified including powder coating of minimum 50 micron thickness.complete all as specified and directed. |
| 44 | S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified including powder coating of minimum 50 micron thickness. complete all as specified and as directed. |
| 45 | S&F Anodised aluminium door shutters,aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beadingscrews etc.complete all as specified and directed. |
| 46 | S&F 12mm Prelaminated particle board, interior grade, prelaminated both sideswith decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. |
| 47 | M&L for preparation of new untreated wood and wood based surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed |
| 48 | M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying twocoatsof synthetic enamel paint over acoat of red oxide primer complete all as specified and directed |
| 49 | M&L for preparation of old wooden surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed |
| 50 | M&L for preparation of old steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed |
| 51 | Dismantling of Asbestos Cement (Corrugated, semi- corrugated, etc.( sheets in roof coveringscomplete all as specified and as directed. |
| 52 | Dismantling of plain or corrugated roof steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings.complete all as specified and as directed. |
| 53 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with selftapping screws complete all as specified and as directed. |
| 54 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ as in ridge, fixed with ixed with selftapping screwscomplete all as specified and as directed. |
| 55 | M &L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed. |
| 56 | M&L for Cutting out cracks to V-section in existingterracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight). complete all as specified and as directed. |
| 57 | S&F for APP based polymeric membrane minimum weighing 3Kg/sam and minimum 3mm thick reinforced with polyster non wove fabric (wt, not less than 150 gms/sqm) land on primed surfacfe by forced application complete all as specified. |
| 58 | M&Lfor Bitumen blown any grade, applied hot, two cfoats, to concrete surfaces at the rate of 1.5 Kg per Sq. m. per coat. complete all as specified and as directed. |
| 59 | M&L for 25mm thick cement concrete type C-2 , 1:2:4 (20mm graded aggregate) finishing surfaces even and smooth without using extra cement. complete all as specified and directed. |
| 60 | M & L for Screed bed or beddinglayer of mortar 15 mmthick for laying floor finishes, mixed with integral water proofing compound weight of cementas per manufacturer\"s instructions and finished the surface even and smooth without using extra cement complete all as specified and directed. ( Note : WPC shall be measured and paid separately) |
| 61 | Supply only water proofing compound for external plaster.complete all as specified and directed. |
| 62 | Dismantling wall and celling board (fibre, pulp, insulation etc) any thickness including cover fillets as directed. |
| 63 | S&F 605x605mm Anodised aluminium snap grid frame work for false ceilong complete all as specified and directed. |
| 64 | S&F Hangers 6mm dia G.I (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilinhg cleats made out of G.I. flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed. |
| 65 | M&L for 6mm thickhigh pressutre, oceanic pre-primed, self embossed, non-asbestos fibrecement decorative board , water, termite and fire resistant for insulatrion and acoustic piurpose fixed or laiod/inserted to timber/GI/Aluminium framework with screws complete all as specified and as directed. |
| 66 | Demolition of cement concrete s reinforced (reinforcement cut as required to facilitate demolition)Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed |
| 67 | M&L forFormwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified and as directed. |
| 68 | M&L forFormwork to soffits of suspended slabs curve such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) etc completed as directed. |
| 69 | M&L for RCC (Nominal Mix) type BO 1:2:4 (12.5mm graded aggregate) for Chajjas, Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc completed as directed. |
| 70 | M&L for RCC 1:2:4type B-1 precast concrete as in cover slab set in CM (1:4) including necessary form work complete all as specified and as directed. |
| 71 | MS TMT bars 8 to 10 mm dia and over, cut to length, bent to shape required, including cranking, bending etc and binding with and including mild steel wire (annealed) not less than 0.9mm dia as in reinfocemetn complete all as specified and as directed. |
| 72 | All as per Srl item No 71 abovebut 6mm to 8mm dia. |
| 73 | Dismantling water tanks and removing to store Exc 250 & n.exc 500 Ltrs complete all as specified and as directed. |
| 74 | S&F Rotational moulded polyethylene water storage tanks 500 Ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed. |
| 75 | Dismantling water tanks and removing to store Exc 500 & n.exc 1000 Ltrs complete all as specified and as directed. |
| 76 | S&F Rotational moulded polyethylene water storage tanks 1000 Ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed. |
| 77 | S&F 15mm bore ball brass valves high pressure, with polythene float & fly nuts complete, screwed for iron pipe or brass ferrulecomplete all as specified and directed. |
| 78 | S&F 15mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 79 | Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 80 | M & L PCC 1:3:6 type C-2 (50 mm) thick ( 40mm graded aggregate) thick as in plinth protection/Hard standing , etc finishing cement concrete surface even & fair whthout using extra cementmaking joints with bitumastic filling in proportion of bitumen and sand 1:2 complete all as specified and directed. |
| 81 | Dismantling floor, hearth or wall tiling including cement mortar bedding (dut not backing), removing rubish of the premises complete all as specified and as directed. |
| 82 | M&L 15 mm thick, screed bed or bedding layer of cement mortar 1:4,for laying floor finishes as directed. |
| 83 | M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles all as specified and directed. |
| 84 | M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding0.18 sqm but notexceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles all as specified and directed. |
| 85 | M&L rendering 10mm thick in cement mortar (1:3) on fair faces of brick work or concrete surfaces as in vertical surfaces for laying tiles as directed. |
| 86 | M&L Glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to matchwith the shade of tiles all as specified and directed. |
| 87 | M&L Screed bed or bedding layer 15 mm thick in cement mortar 1:4 on floors for laying floor finishincluding complete all as specified and directed. |
| 88 | S&F Chequrred cement concrete tiles 25 cm x 25cm x 25 mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and no pigmentcomplete all as specified and directed. |
| 89 | S&F of 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 90 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 91 | M&L Screed bed or bedding layer 20 mm thick in cement mortar 1:3 on floor for laying floor finish complete all as specified and directed. |
| 92 | S&F Machine cut kota stone slab flooring 20-25mm thick over cement screed basein cement mortar 1:3 with cement slurry @ 4kg/Sqm jointed and pointed with grey cement slurry mixed with pigmentlaid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishingcomplete all as specified and as directed. |
| 93 | S&F Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointedcomplete all as specified and as directed. |
| 94 | Taking up or down 15 mm bore steel tubing and connections, including removal to store complete all as specified and directed. |
| 95 | Re-fixing 15mm bore old steeltubes,with all fittrings and fixed, to walls and ceilings or laying in floorscomplete all as specified and as directed. |
| 96 | S&F steel tubes, galvanised 15 mm bore, medium grade with all fittings & fixed complete to wall and ceiling or laid in floors etcincluding taking down old one complete as specified and directed |
| 97 | Taking up or down 20 mm bore steel tubing and connections, including removal to store complete all as specified and directed. |
| 98 | Re-fixing 20mm bore old serviceable steeltubes,with all new fittrings and fixed, to walls and ceilings or laying in floorscomplete all as specified and as directed. |
| 99 | S&Fsteel tubes, galvanised 20 mm bore, medium grade with all fittings & fixed complete to wall and ceiling or laid in floors etc complete as specified and directed . |
| 100 | S&F in repairs 32mm diaWaste coupling of PTMT (half or full threaded) (Minimum weight 32mm45gms/40mm-60 gms) complete all as specified and directed. |
| 101 | Demolition of brick work built in cement mortar complete all as specified and as directed. |
| 102 | M & L old size brickwork with flyashbricks, straight or curved on plan to any radius in \ half brick thick walls, built in built in CM 1:4. complete all as specified and as directed. |
| 103 | Taking down cement plaster on brick or stone or concrete surfaces of wall etc ,including raking out joints , hacking for key, scrubbing down with wateretc. complete all as specified and as directed. |
| 104 | M&L for rendering 10mm thick on fair face of brick worksor concretesurfaces of wallswith CM (1:4) anf finished even and smoothwithout using extra cement. complete all as specified and as directed. |
| 105 | M&L for rendering 15mm thick on other than fair face of brick worksor concretesurfaces of wallswith CM (1:6) and finished even and smoothwithout using extra cement. complete all as specified and as directed. |
| 106 | M&L for rendering 5mm thick in ceilings of concretesurfaces with CM (1:3) and finished even and smoothwithout using extra cement. complete all as specified and as directed. |
| 107 | M&L for preparation of new plastered surfaces of wall and applying two coats of Distemper over a coat of white primer etc complete all as specified and directed by Engr-in-charge. |
| 108 | M&L for preparation of new plastered surfaces of ceiling and applying two coats of white wash over a coat over a coat of white primer etc complete all as specified and directed |
| 109 | M&L for preparation of new plastered surfaces of wall and applying three coats of white wash etc complete all as specified and directed . |
| 110 | M&L for preparing old decorated surfaces of walls by complete removal of existing treatment and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed. |
| 111 | M&L for 3mm thick wall care putty on wall complete all as specified and as directed. |
| 112 | Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15cm thickness (below or above ground level) complete all as specified and as directed. |
| 113 | M&L of Cement concrete type C2 1:3:6 (40mm graded aggregate) as in surface channels and drains incl formwork complete all as specified and as directed. |
| 114 | M&L Extra for forming fair finishing to drains or channel of 30 cm inner girth in cement concrete with using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and as directed. |
| 115 | S&FAluminium Door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixedcomplete all as specified and as directed. |
| 116 | Dismantlingtimber scantlings 40 Sq. cm and over in section and in any position in unframed workcomplete all as specified and as directed. |
| 117 | M&L 2nd class hardwood, scantlings, wrought, timber fixed, complete as specified and directed. |
| 118 | Dismantling of timber fillets, rails, posts, rafters, purlins etc under 40 sqcm in sectioncomplete all as specified and as directed. |
| 119 | S&F Second class hard wood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails, cross sectional area exc 6and n.exc 13 Sqcmcomplete all as specified and as directed. |
| 120 | M & L preparing new wood & wood based surfaces of any descriptions but not exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 121 | M&L Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixedcomplete all as specified and as directed. |
