|
| 1 | Material and labour for preparation of old plastered or unplastered surfaces of walls by brooming down or steel wire brushing ; scrapping down smoke soot , moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of white wash on old decorated surfaces of walls including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified anddirected. |
| 2 | Material and labour for preparation of old decorated surfaces of walls by washing, rubbing down and steel wire brushing,scraping down the surface covered by smoke soot,growth of moulds and moos,efflorescent,having oil and gresase spots and applying one coat of cement base paint(white or tinted) complete all as specified anddirected. |
| 3 | Material and labour for preparation of old decorated surfaces of walls by washing, rubbing down and steel wire brushing,scraping down the surface covered by smoke soot,growth of moulds and moos,efflorescent,having oil and gresase spots and applying two coat of cement base paint(white or tinted) complete all as specified and as directed. |
| 4 | Material and labour for preparation of old plastered or unplastered surfaces of ceiling by brooming down or steel wire brushing ; scrapping down smoke soot , moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of white wash on old decorated surfaces of ceiling including washing floors complete all as specified anddirected. |
| 5 | Material and labour for preparation of old painted wooden /wood based materials surfaces of any description, not otherwise described, over 10 cm width or girth and paintingone coat with synthetic enamel paint (1st quality) including cleaning, stopping and rubbing down and removingalldropings etc. complete all as specified anddirected. |
| 6 | M&L for preparation of old painted wood and wood based surfaces of any description, n.exc 10 cm width or girth when unconnected with other painting or when painted in different tint and applying one coat of synthetic enamel paint complete all as specified anddirected. |
| 7 | Material and labour for preparation of old painted steel and iron surfacesof any description , not otherwise described ,over 10 cm width or girth and painting one coat with synthetic enamel paintincluding cleaning, stopping and rubbing down and removingalldrops etc. complete all as specified anddirected. |
| 8 | Material and labour for preparation of old plasteredsurfaces of walls by washing, rubbing down and stopping of distempered and painted surfaces and distempering walls by applying one coat ofdistemper oil emulsion of any tint/shadeincluding washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified anddirected. |
| 9 | Material and labour for preparation of old plasteredsurfaces of walls by washing, rubbing down and stopping of distempered and painted surfaces and distempering walls by applying two coat of oil bound distemper over a coat of primer of any tint/shadeincluding washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified anddirected. |
| 10 | Material and labour for writing letters or figures ( Block , Roman, Italic or Indian ) n exc 30 cm hight with thick synthetic enamel paint without showing signs of brushes mark ( if necessary they shall be repainted until the desired result obtained) complete all as specified anddirected. |
| 11 | Taking down cement plaster on brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water, any description etc.including removing of rubbished material from work site complete all as specified anddirected. |
| 12 | Material and labour for rendering 15 mm thickon other than fair faces of brick work or concrete surfaces in cement and sand mortar 1:4, finished even and smooth without using extra cement complete all as specified and directed. |
| 13 | M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces as in walls in cement mortar (1:6) and finished the surfaces even and smooth without using extra cement complete all as specified anddirected. |
| 14 | M&L for rendering 5 mm thick in cement mortor (1:3) on concrete surfaces as in ceilings (sunshed, chajja etc) and finishing surfaces even and smooth without using extra cement complete all as specified anddirected. |
| 15 | Material and labour for preparation of newly plastered surface of wall and applying two coat of cement base paint over a coat of cement based primer ofany tint/shade including washing floors, etc. , of drops and splashes complete all as specified anddirected. |
| 16 | M&L for 2mm thick wall care putty on plastered surface of wall including rubbing and finishing to obtain the smooth surface complete all as specified anddirected. |
| 17 | Material and labour for preparation of newly plastered surfaces of walls by applying wall carewhite putty and sand papering surfaces to achieve smooth surfaces and applyingtwo coats of acrylic based distemper emulsion, ofany tint/shade over a coat ofcement basedprimer including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified anddirected. |
| 18 | M&L for preparing newly plastered surfaces of walls, etc and applying three coats of white wash complete all as specified anddirected. |
| 19 | M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified anddirected. |
| 20 | Hacking out old broken glass(any thickness,size, quality or description) from wooden frames or stone concrete or bricks sorrounds,glazed with oil putty or fixed with beads complete all as specified anddirected. |
| 21 | S&F in repair for 3mm thick, sheet glass, ordinary quality and glazing with oil putty or fixed with beads in square not exceeding 0.5 Sqm in each pane complete all as specified anddirected. |
| 22 | S&F in repair for 3mm thick, figured glass,pin head and glazing with oil putty or fixed with beads in square exc 0.5 sqm in each pane complete all as specified anddirected. |
| 23 | S&F for 5.5mm thick sheet glass ordinary and glazed with oil putty or fixed with beads in square exc 0.5 sqm in each pane complete all as specified anddirected. |
| 24 | M&L for complete removal of existing treatment incl preparation of old surfaces, scrubing down, washing etc from walls by scrapping with mechanical wall sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\"/9\" to make the surface free from dust, loose paint etc. and applying two coats of 100% premium Acrylic emulsion paint having VOC less than 50 gm/ litre and UV resistant as per IS-15489:2004 alkali and fungal resistant exterior paint of required shed (company depot tinted)with silicon additives 1.43 litrs/ 10 Sqm over and including primer coat of exterior primer applied 0.90 litre/10 Sqm over new surfaces using Airless spray technology with maximum working pressure of 3300 PSI and capable of operating single spray gun with a maximum material hose length of 30 mtr, the spray machine shouldbe of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and will execute the same work by authorised applicator (The contractor shall submit the documentary proof for the same) as mentioned in PS and acessories complete all as specified and directed. The quoted rates includes for scaffolding upto any height). |
| 25 | Demolation of unreinforced cement concrete roofs,floors(other than ground floors), beams,staircase, landing,chajjas and similar suspended work complete all as specified and directed. |
| 26 | M&L for PCC in 1:2:4 type B0(12.5mm graded aggregate) asin lintels upto 105m clear span,cills steps,seismic and other similar bends, plinth courses,strring courses,lacing courses,parapets and railings upto 60cm in height,copings,kneelers,apex stones,bed plates,kerbs,water troughts and the like including weathering,slightly rounded or chamfered angles and throating,filling of pressed steel door frames complete all as specified anddirected. |
