|
| 1 | Demolition of cement concrete in ground floor, paving nexc 15cm thick (below or above GL) complete all as specified & directed by Engr-In-Charge |
| 2 | M&L for cement concrete type C-2, 1:3:6 (40 mm graded stone aggregate 75 mm thick as in plinth protection finishing surface even and smooth without using extra cement, complete all as specified & directed by Engr-In-Charge |
| 3 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises |
| 4 | Roughening surfaces of old concrete floor by picking ,sweeping clean and washing down with water to remove dust etc. |
| 5 | M&L for non-skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm and not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles as in floor over and including 15mm thick screed in CM 1:6 complete all as specified & directed by Engr-In-Charge. |
| 6 | M&L Glazed colured ceramic tiles in vertical surface 450 x 300 x (7-8mm) thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:4 on fair face of brick work or concrete surfaces as backing for tiles complete all as specified & directed by Engr-In-Charge |
| 7 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floors over and including 15mm thick screed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified & directed by Engr-In-Charge |
| 8 | M&L Granite (of any type) tiles 18-20 mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 20mm thick screed in CM 1:6 etc complete all as specified & directed by Engr-In-Charge by Engineer-In-Charge |
| 9 | M&L for Pre-polished Machine cut kota stone slab flooring 20-25 mm thick incl 100mm wide white marble strip all around as in border as in floor over 20mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment tomatch the shade of the slab including rubbing and polishing complete |
| 10 | M&L for Pre-ploished kota stone slab 15-16 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointedin neat cement slurry and pointed with white or coloured cement to match over and including 10 mm thick plaster in CM 1:3 in vertical surface complete all as specified and directed by Engr-In-Charge. |
| 11 | Demolition of precast cement concrete block /brick wall masonry built in cement mortar complete all specified and directed. |
| 12 | M&L for brick work with sub class B Brick straight or curved on plan exceeding 6m mean radius built in CM 1:6 complete all as specified & directed by Engr-In-Charge |
| 13 | M&L for brick work with sub- class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed by Engr-In-Charge |
| 14 | Taking down chowkhats or frame nexc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified & directed by Engr-In-Charge. |
| 15 | Taking down chowkhats or frame exc 1.5 sqm but nexc 4.00 Sqm each with shutters (without taking off shutters from the frame) complete all as specified & directed by Engr-In-Charge. |
| 16 | Taking down Shutters of any description exc 1 sqm but nexc 2 sqm each complete all as specified & directed by Engr-In-Charge |
| 17 | M&L plain solidchowkhats and frame wrought framed rebated on solid rounded or chamfered of 2nd class hardwood complete all as specified & directed by Engr-In-Charge. |
| 18 | S&F Steel windows with side hung shutters including projecting type hinges with steel handle and locking arrangement, and steel peg stay, complete with glazing bars, dovetailed or welded including wiremesh shutter all as specified and as directed. |
| 19 | S&F for Pressed steel frames for doors of size 105 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, |
| 20 | M & L for PCC 1:3:6 type C-0 using 12.5 mm graded aggregate as in filling hollow portion of steel door frames/pcc block for fixing hold fast complete all as specified & directed by Engr-In-Charge. |
| 21 | Factory made solid panel PVC wiremesh door shutter 30 mm thick (style) wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90 degree) used instead of exposed portion of PVC sheet beading ,wire gauzed i.e. panel will be of wire gauze in lieu of wood grain printed PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be secured with additional layer of wire netting 12mm gauge stretched to tighten firmly consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement,fixing with butt hinges of required size suppling & fixing in the frame at site as per specification & drawing. |
| 22 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with butt hinges of required size with necessary full body threaded star headed counter sunk screws, all as per direction of Engineer-In-Charge. |
| 23 | Hacking out old broken glass (any thickness, size, quality or descrption) from metal frame including punching or driling outold glazing pins/springs. |
| 24 | S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.50 sqm in each panels complete all as specified and directed. |
| 25 | S & F of 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified & directed by Engr-In-Charge. |
| 26 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples orwith tinned tacks complete all as specified & directed by Engr-In-Charge. |
| 27 | S & F in repair 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed by Engr-In-Charge |
| 28 | S&F 100 mm stainless steel butt hinges medium weight,cold rolledcomplete all as specified & directed by Engr-In-Charge |
| 29 | S&F 125mm aluminium handles, cast type anodised complete all as specified & directed by Engr-In-Charge. |
| 30 | S&F 125 mm aluminium anodised barrel tower bolts extruded section complete all as specified & directed by Engr-In-Charge |
| 31 | S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing bolts of extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified & directed by Engr-In-Charge |
| 32 | S&F floor door stopper of aluminium alloy body and tongue,anodised with hard drown steel spring, fixed in floors 140 mm long complete all as specified & directed by Engr-In-Charge |
| 33 | Taking down old wooden/particle boards similar work as in kitchen cabinet/cupboard all as specified and as directed. |
| 34 | S&F 18-19 mm thick medium density fibre board,any color/shade, exterior grade, fixed to timber framework with screws complete all as specified and as directed by Engr-In-Charge |
| 35 | S&F 6mm thick teak wood lipping fixed with nails to block board or veneered particle boardcomplete all as specified & directed by Engr-In-Charge |
| 36 | S & F Continuous (piano) hinges, mild steel, bright finish or electro galvanised (width of flaps 30mm) all as specified. |
| 37 | S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished incl catch magnet complete all as specified and directed by Engr-In-Charge |
| 38 | S&F in repairs (curtain rod) Harrison rails,mild steel, chromium plated with fixing blackets, stops, rollers etc complete all as specified & directed by Engr-In-Charge |
| 39 | Dismantling structural steel work as in framed truss/purlins/rafters etc all as specified and as directed. |
| 40 | S&F roof trusses (framed), trussed, purlins, crane gantries, rails and gastenings and heavy brackets framing (beam, tee, angle channel or flat sections) (Fe-290 Gde E-165) inicluding distance pieces, cleats etc. |
| 41 | M&L for mild steel framed wk as in doors or gates of angle iron or other section complete drilled for fixing of steel sheeting or other covering doors, etc to be prepared for hanging or sliding with & incl either hooks & hinges or steel hanging door fitting & hanging, also fastening & fixingFe-290, Gde-165 complete all as specified & directed by Engr-In-Charge |
| 42 | Dismantling of plain or corrugated steel sheeting of any guage/thickness in roof covering/wall clading complete all as specified and directed |
| 43 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 44 | S&F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof or wall etc complete all as specified and directed. |
| 45 | Demolition of cement concrete in reinforced of any description and in any position not otherwise specifically provided complete all as specified & directed. |
| 46 | M&L for precast cement concrete type B1 1:2:4(Using 20 mm graded stone aggregate) as in cover slabs, manhole cover, chamber cover and drainge cover set in cement mortar 1:6 including necessary formwok complete all as specified & directed by Engr-In-Charge. |
| 47 | M&L for Formwork tofair finish flat surface of fins, louvers, fascia.chajja etc |
| 48 | M&L for reinforced cement concrete (nominal mix) type B0 1:2:4 (12.5mm graded aggregate) flat or curved fins, shalfs, fascias, louvres, parapets, and railings exc. 60cm in height, newels, balustrade, and the like all as specified and directed by Engr-In-Charge |
| 49 | M&L for Mild steel 10mm dia and over TMT bars , cut to length, bent to shaperequired, including cranking, bending spirally for hooping for columns, hooking ends and bindingwith and including mild steel wire (annealed) not less than 0.9mm dia or securing with clipscomplete all as specified & directed by Engr-In-Charge. |
| 50 | Taking down cement plaster on brick or stone walls, of any description including raking out joints, hacking for key, scrubbing down with water, etc complete complete all as specified & directed by Engr-In-Charge |
| 51 | M&L 15 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces including finishing the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 52 | M&L for Preparing new surfaces, plastered or unplasterd old decorated wall surfaces and applying two coat of oil emulsion distemper complete all as specified and directed. |
| 53 | M&L10mm thick renderingin CM 1:4 on fair faces of brick/concrete ceiling surfaces (horizontal or vertical) including finishing the surfaces even and smooth without using extra cement mixed with WPC. (Note-WPC will be measured & paid separately) . |
| 54 | Supply only liquid water proofing compound. |
| 55 | M&L for preparing newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified & directed by Engr-In-Charge. |
| 56 | M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate in surface channel and drain complete all as specified and directed |
| 57 | Extra for forming fair finished drain or channel 90 cm inner girth in cement concrete, using extrac cement including forms, mould, mitred/stopped ends etc. complete all as specified and directed. |
| 58 | Supplying and laying of CPVC pipes 16mm outer diameter SDR 11 incl all CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. including taking down old pipe, complete all as specified & directed |
| 59 | Supplying and laying of CPVC pipes 20mm diameter SDR 11 & all CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. including taking down old pipe, complete all as specified & directed |
| 60 | S&F in rep triple layered 1000 Ltr rotational moulded polyethylene water storage tanks ( cylinderical vertical with closed top) hoisted & fixed in position including taking down old tank, complete all as specified & directed by Engr-In-Charge |
| 61 | S&F in repair Ball brass valves 25 mm, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified & directed by Engr-In-Charge |
| 62 | S&F in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe but incl waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement and fixing Union for discharge pipe complete all as specified & directed by Engr-In-Charge |
| 63 | S&F in repair Vitreous china urinal partition of size min. 310x700 mmterminating about 40cm above floor line complete all as specified & directed by Engr-In-Charge |
| 64 | S&F in repair vitreous china squatting pan \"Orissa pattern\" size 580 mm x 440 mm white with integral foot rests, incl provn of lime concrete bedding complete all as specified & directed by Engr-In-Charge |
| 65 | S&F in repairs PVC flushing cistern low level white with inlet pipe,ball valve,float valve and handle including brackets complete all as specified & directed by Engr-In-Charge |
| 66 | S&F in repairs vitreous china wash basin,white flat back size 550X400mm including 32mm in size Waste fittings with brackets cutting for and pinning in ends of brackets or erecting stand chromium plated and brackets fixing over counter top position complete all as specified and directed by engr-In-Charge |
| 67 | S&F in repair 15 mm bore bib taps, cast copper alloy, chromium plated fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as specified & directed by Engr-In-Charge |
| 68 | S&F in repair 15 mm Stop valves/ angle valve, cast copper alloy, chromium plated fancy type, screwed down, high pressure,screwed both ends for iron pipe or for unions and fixed complete all as specified & directed by Engr-In-Charge |
| 69 | S&F in repair15 mm concealed type valves, chromium plated fancy type, screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed by Engr-In-Charge |
| 70 | S&F in repair 15mm bore Pillar taps fancy swan neck type , cast copper alloy, chromium plated, screwed down high pressure, with or without lettered ‘Hot\" or ‘Cold\"screwed for iron pipe and fixed complete all as specified & directed by Engr-In-Charge |
| 71 | S&F in repairs Health Faucet (ABS Body) MS, Chromium platedsuitable for 15mm dia pipe with 1.25 mtrlong flexible tube and ABS wall hook including making connections and fixed in position complete all as specified & directed by Engr-In-Charg |
| 72 | S&F in repair toilet paper holder with flat recessed type stainless steel complete all as specified & directed by Engr-In-Charge |
| 73 | Supply and fix in repair brass chromium plated shower rose 125 mm in size with or without swivel joints any size incl fixing to steel pipe or union, complete all as specified anddirected. |
| 74 | S&F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm long all as specified. |
| 75 | S&F in repair brass chromium plated tubular towel rail 20mm dia, D type, 60cm longbetween flange complete all as specified and directed |
| 76 | S&F in repair brass chromium plated towel Ringfixed with and including Chromium plated brass screws and wooden/plastic cleats. |
| 77 | S&F in repairstainless steel round Grating 100mm dia with or without waste hole of complete all as specified & directed by Engr-In-Charge |
| 78 | S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified & directed by Engr-In-Charge |
| 79 | S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed |
| 80 | S&F in repair for 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or infloor complete all as specified & directed by Engr-In-Charge . |
| 81 | S&F in repair for 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or infloor complete all as specified & directed by Engr-In-Charge . |
| 82 | S&F in repair 75 mm PVC (SWR) bends any radius complete all as specified & directed by Engr-In-Charge . |
| 83 | S&F in repair 110 mm PVC (SWR) bends any radius complete all as specified & directed by Engr-In-Charge . |
| 84 | S&F in repair PVC (SWR) junction, with access door, single (single T) equal or unequal, for 75 mm bore of pipe complete all as specified & directed by Engr-In-Charge . |
| 85 | S&F in repair PVC (SWR) junction, with access door, single (single T) equal or unequal, for 110 mm bore of pipe complete all as specified & directed by Engr-In-Charge . |
| 86 | M&L for two coat of synthtic enamel paint overa coat of pink primer to new wooden surface of any description exc 10 cm girth or width including prepration of new/old wooden surfaces complete all as specified & directed by Engr-In-Charge |
| 87 | M&L for one coat of synthetic enamel paint over to old wooden surface of any description exc 10 cm girth or width including prepration of old wooden surfaces complete all as specified & directed by Engr-In-Charge |
| 88 | M&L for two coat of synthetic enamel paint overa coat of red oxide, zinc chrome primer to new steel surfaces of any description exc 10 cm girth or width including prepration new steel surfaces complete all as specified & directed by Engr-In-Charge |
| 89 | M &L for preparation of plastered or unplastered old decorated surfaces of ceiling/wall andapplying two coat of oil emulsion distemper complete all as specified & directed by Engr-In-Charge. |
| 90 | M &L for preparation of (previously treated) plastered or unplastered surfaces of walls and applying two coat of oil emulsion distemper over a coat of 1mm th wall putty any tint of walls complete all as specified & directed by Engr-In-Charge. |
| 91 | M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less that 50gm/liter and UV resistance as per IS-15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 liter / 10 Sqm over and including priming coat of exterior primer applied @0.90 liter/10 Sqm over new surfaces complete all as specified and directed. |
| 92 | S&F in repair Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified & directed by Engr-In-Charge. |
| 93 | M&L for water proofing treatmentofsunken floor of toilets having vertical depth 300-450mm as described with following course of applications:- (a) Demolition of concrete of any description not otherwise specifically provided for, or in any type of filling in sunken portion and cleaning the sunken portion including vertical wall surface and removal of debris and rubbish out side MOD land all as directed (b) 40 mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) with using WPC as per manufacturer\"s instruction on bottom of sunken portion with proper slope towards spout.(c) Vertical sides of sunken portion shall be plastered 15 mm thick in cement mortar 1:3 mixed with water proofing compound as per manufacture\"s instruction. Plaster shall be extendedover PCC coving when the same is green i.e PCC & plaster be carried out at the same time as directed at site.(d) Spout of 32 mm bore GI pipe \"light grade\" projecting 450 mm from face of outer wall with mosquito proof cap on inner face of pipe shall be provided to drain out seepage including cutting holes & making good as required.(e) After curing of PCC/Plaster, two coats of fibre reinforced elastomeric liquid waterproofing membrane compound shall be applied all as directed.(f) Sunken portion shall be tested for leakage/seepage /dampness by ponding with water for 72 hours, in case any defect is noticed the sunken portion shall be grouted with cement slurry mixed with suitable water proofing chemical and tested again. The process shall be repeated till leakage/seepage not rectified and Sunken portion shall be filled again with PCC 1:5:10 complete all as specified & directed by Engr-In-Charge.Mode of Measurement(i) Sunken slab to be treated up to 450 mm depth.(ii) Bottom area of sunken slab will only be measured for qty calculation and payment. |
| 94 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete incl fittings such as switches, ceiling roses, pendants, regulators, sockets etc and making good disturbed surfaces of walls, floors etc all as specified. |
| 95 | M & L for point wiring using1.5 Sqmm FRLS PVC insulated unsheathed multi stranded copper conductor cable(Phase, neutral and earth wire) drawn through and incl concealed PVC conduit medium grade of dia not less than 20mmand connected to common earth dolly with pressed steel sunken boxes not less than 1.2mm thick and 3 mm thick plastic laminated sheet cover fixed with brass screws or GI/MS modular sunken boxes incl modular cover plate(inner & outer) of required module for mounting modular switch/socket/regulator including cutting grooves for concealed wiring for one light/fan/bell point controlled by one 1way switch complete all as specified and directed. Note: 1. Conduitshall be fixed on surface of ceiling with necessary saddles where concealing of conduit is not feasible.2. Rates of cutting/cheasing wall and making good the disturbed surface shall deemed to be included in quoted rates. |
| 96 | M&L point wiring with 1.5 Sqmm (Nominal cross sectional area) single core PVC insulated with PVC unsheathed multi stranded copper conductor FRLS-H cable in existing concealedPVC conduit , complete with all accessories/fitting, including Zinc Coated pressed steelterminal switch board floor/wall mounted/flush type (depth not less than 50 mm)of suitable size (lengthX width)for mountingmodular switches, Modular sockets, Modular regulators includingPVC module top cover plate with frame of suitable size , brass screw and washer including unsheathed single core PVC insulatedcable green in colour 1.5 Sqmm multistranded copper conductor as contineous earth wire and connecting to earth dolly complete all as specified for one light point / fan point controlled by one way switch of 5/6 Amps. |
| 97 | All as per item No. 95 here in before but for one 3/5 pin socket outlet point on same board controlled by one way switch of 5 Amps. |
| 98 | All as per item No. 95 here in before but for one 3/5 pin socket outlet point on independent board controlled by one way switch of 5 Amps. |
| 99 | All as per item No. 96 here in before but for one 3/5 pin socket outlet point on independent board controlled by one way switch of 5 Amps. |
| 100 | All as per item No. 95here in before but for one 15Amp socket point using with 2.5Sqmm FRLS PVC insulated multi-strand copper conductor. |
| 101 | All as per item No. 96here in before but for one 15Amp socket point in Existing conduit using with 2.5Sqmm FRLS PVC insulated multi-strand copper conductor. |
| 102 | S&FModular switch 1 module single pole one way 6 Amps, 240 volt complete all as specified. |
| 103 | S&FModular switch 1 module single pole one way 16 Amps, 240 volt complete all as specified. |
| 104 | S&F Modular socket outlet, 2 module,3 pin 5/6 Amps, 240 voltcomplete all as specified. |
| 105 | S&F Modular socket out let, 2 module, two in one 3 pin 5/6 Amps and 3 pin 15/16 amp , 240 volt, complete all as specified. |
| 106 | S&F ceiling rose, surface Bakelite, AC, 60x30mm, 3 terminals complete all as specified. |
| 107 | S&F lamp holder PVC /poly carbonated type with back plate suitable for pendants /angular /batten fittings complete all as specified. |
| 108 | S&F stepped type electronic fan regulator modular type, 2 module 240 volt not less than 100W complete all as specified. |
| 109 | S&F in replacement 20W surface / wall mounted box type batten LED luminaries having extruded Polycarbonate housing and PC diffuser (bright white/warm white) and integrated electronic driver with high efficiency, CRI = 80 (Minimum), PF≥ 0.90, luminous efficacy ≥ 100 lumens/Watt operating voltage 140V-240V complete with mounting accessories internally prewired and including connecting up with cord flexible copper conductor cable of suitable size complete all as specified and directed. |
| 110 | Labour only for fixing existing serviceable LED fitting20 watt all as specified and directed. |
| 111 | S&F in replacement LED lights fitting mirror type with high out put diffuser 2 feet,1x 10W, 220V, AC decorative box type with driver with mounting accessories and connecting up with cord flexible copper conductor cable of suitable size from ceiling rose complete all as specified. |
| 112 | S&F in replacement LED bulb 12 watts,B-22 type,220V complete all as specified. |
| 113 | S&F 1x35 watt LED building security light fitting making electric connection with 3 core 0.75Sqmm PVC insulated copper conductor cable complete all as specified. |
| 114 | Supply and fixing in replacement security light bracket made out of light grade 25 to 32mm die GI pipe of length0.9 mtrbend to shape and mounting on wallusingclamps nut bolts etc complete all as specified and directed. |
| 115 | S&F in replacement Energy saving, surface mounted, bulk head LED luminaries 10/12 W with Polycarbonate housing anddiffuser complete including connecting up with cord flexible copper conductor cable of suitable size complete all as specified an directed. |
| 116 | Supply and fixing LED luminaries panel light surface mounted24 watt, 220 V AC , rondo shape minimum die 190 mmincluding connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified. |
| 117 | Supply and fixing Decorative, wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22 base. |
| 118 | Supply and fix 3W Flexible Wall Reading Lights with On Off Switch ,Gooseneck Light - 360° Lighting complete all as specified and directed. |
| 119 | Supply and fixing in replacement25 watt , IP 65 LED post Top Lantern, energy saving, environmental friendly,designed with symmetrical light distribution, spun aluminium landscape luminaries with high power LEDs as light source including all accessories and mounting on exiting pipe completeall as specified and directed. |
| 120 | Supply and fixing Vertical Load line sheet metal enclosure double door, Triple pole and neutral (TP&N vertical load line) AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection, with the inbuilt provision forfixing of 1 No MCCB of XT1160 frame suitableup to 160 Amp and 12 Nos MCB\"S inside of DB,including 100 Amps ,25 KA 4 pole MCCBwith metal door and flush to wall/fixed on wall surface including grouting and cutting in existingwall and making good disturbed surfacewith two coats of white / colour washing / distempering etc to match the existing one complete all as directed by Engineer - in - Charge. |
| 121 | S&F sheet metal enclosure for DB TPN 4 way with 200 Amp rated bus bar 415 Volts,double door suitable for housing MCBs and isolators complete all as specified. |
| 122 | S&F sheet metal enclosure for DB SPN 6 way with 200 Amp rated bus bar 240 Volts,double door suitable for housing MCBs and isolators complete all as specified. |
| 123 | S&F sheet metal enclosure for DB SPN 12 way with 200 Amp rated bus bar 240 Volts, Double door suitable for housing MCBs and isolators complete all as specified and directed |
| 124 | S&F sheet metal enclosure for DB SPN 8 way with 200 Amp rated bus bar 240 Volts, Double door suitable for housing MCBs and isolators complete all as specified and directed |
| 125 | Supply and fixing miniature circuit breaker (MCB) SPNcurrent carrying capacity 32 to 40 Amps Amp, 240V, 10 KA \"B\" curve type, in the MCB DB complete with connection testing and commissioning complete all as specified. |
| 126 | Supply and fixing miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 Amp, 240V, 10 KA \"B\" curve type, in the MCB DB complete with connection testing and commissioning complete all as specified. |
| 127 | S&F MCB 4 pole32 to 100 Amps, 240volts 10KA complete all as specified. |
| 128 | Supply & fixingin repair industrial type SPN enclosure with a two pin and earth plug and socket including industrial plug 3 pin 20 Amp, complete with and including 20 Amps MCB, single pole, AC, 240 volts and flush to wall including all cuttings & chases etc on wall of fixed on surface of wall and making good including two coats of white / colour washing / distempering etc to match the existing disturbed surfaces complete all as directed . |
| 129 | Material and labour for sub main wiring with 3x4 Sqmm nominal cross sectional area (2 single core cable of 4 Sqmm for Phase and neutral + 01 single core cable of 4.0 Sqmm for earth wire), 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 4.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed /surface conduit of 25 mm die, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dully including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existingand taking down the old unserviceable submain wiring of ant type complete all as specified & directed.( Note - One meter of conduit along with 2x4.0 Sqmm wire and one 4.0 sqmm earth wire shall be measured as one length). |
| 130 | Material and labour for sub main wiring with 3x6 Sqmm nominal cross sectional area (two single core cable of 6 Sqmm for Phase and neutral + 01 single core cable of 6.0 Sqmm for earth wire), 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 6.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed /surface conduit of 25 mm die, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dully including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existingand taking down the old unserviceable submain wiring of ant type complete all as specified & directed.( Note - One meter of conduit along with 2x6.0 Sqmm wire and one 6.0 sqmm earth wire shall be measured as one length). |
| 131 | Material and labour for sub main wiring with 5x6 Sqmm nominal cross sectional area (3 single core cable of 6 Sqmm for Phase+ 01 single core cable of 6.0Sqmm forneutral + 01 single core cable of 6.0 Sqmm for earth wire), 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 6.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed /surface conduit of 25 mm die, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dully including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existingand taking down the old unserviceable submain wiring of ant type complete all as specified & directed.( Note - One meter of conduit along with 4x6.0 Sqmm wire and one 6.0 sqmm earth wire shall be measured as one length). |
| 132 | Supply, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 35 Sqmm 4 core armoured, PVC sheathed with aluminium conductor heavy duty laid in trenches, fixing on wall, under road crossing through protection pipe etc complete all as specified and directed. |
| 133 | Excavationin trenches not exceeding 1.5 m wide and not exceeding 1.5 M depth in soft/ loose soil and getting outcomplete all as specified and directed. |
| 134 | Material and labour for sand cushioningwith dry fine sand including filling, spreading, levelling in layers in cable trench with approved quality of sand for protection of under ground cable complete all as specified and directed. |
| 135 | Material and labour for continuous brick edging withwidth equal to the depth of the brick of whole sub class \"B\" bricks laid on edge complete all as specified and directed. |
| 136 | Returning, filling in excavated soil in trenches including spreading, levelling, watering and well ramming in 25mm thick layer complete all as specified and as specified. |
| 137 | Removal of surplus excavated soil to a distance exc50 m but not exc in 100 m and deposited where directed at a level exc 50 m above the starting point complete all as specified. |
| 138 | Supply and laying and fixing 40 mm bore galvanised steel tubes with all fittings, light grade, laid in trenches for cable protection complete all as specified and directed. |
| 139 | Material and Labour for earthling complete with galvanised steel earth plate electrode 600x600x6 mm thick, buried directly in ground (earth pitnot less then 2.25 metres deep below ground level) with top edge of the plate not less then 1.5 metres below normal ground level, connoted to galvanised earth lead wire 4.0 mm die by means of bolts, nuts, cheek nuts and washers of galvanised oriron protected by 15 mm bore GI pipe (medium grade) and connected to main switch board as directed including concrete pit in PCC (1:3:6) type C1 precast RCC (1:2:4) type B1 cover slab 40x40 Cm x 6Cm reinforced with 8 mm die deformed bar @ 5 cmc/c with one handle for lifting made out of 8 mm die MS bar, funnel, wire mesh, 20 mm bore GI pipe (medium grade) for watering including charcoal and salt in alternative layers necessary excavation and earth work in any type of soil and testing complete all as shown on electrical plate No-3 of SSR part-I, 2009. |
| 140 | Disconnecting electrically, taking down exhaust fan of size up to 450mm sweep from existing position, dismantling frame and blades, servicing by cleaning oiling /greasing, replacing unsv parts reassembling and refixing at same or new locations duly connected with newcord flexible copper conductor cable of size 23/.0076 from ceiling rose and testing complete all as specified & directed.Note: Spare parts other than specified will be measured and paid separately under respective items. |
| 141 | M & L for Rewinding of exhaust fan motor of size 230 to 300 mm sweep any makewith super enamelled copper winding wire of 32SWG gauge, sleeve work, varnishing with `B\" class insulation varnish, connection with flexible wire of appropriate size two core copper wire up to connector block including cutting and taking out old burnt Al/Cu winding wire complete all as specified and directed. Note : (i) Rewinding should be done at workshop |
| 142 | Disconnecting electrically, taking down ceiling fan from existing position, dismantling blades, servicing by cleaning oiling /greasing, replacing unsv parts, split pins, check nuts, rubber seal etc, reassembling and rehanging at same or new locations duly connected with newcord flexible copper conductor cable of size 23/.0076 from ceiling rose and testing complete all as specified & directed.Note: Spare parts other than specified will be measured and paid separately under respective items. |
| 143 | M & L for Rewinding of AC ceiling fan motor 1200/1400 mm sweep any makewith super enamelled copper winding wire of 35SWG gauge, sleeve work, varnishing with `B\" class insulation varnish, connection with flexible wire of appropriate size two core copper wire up to connector block including cutting and taking out old burnt Al/Cu winding wire complete all as specified and directed. Note : (i) Rewinding should be done at workshop |
| 144 | Supply only for fixing Ball bearing of suitable size/No for Ceilingfan of size up to 1400mm sweep complete all as specified and directed. |
| 145 | Supply and Fix ceiling fan hook all as specified and directed. |
| 146 | Supply and fix copper wire .75 sqm , 3 core multistranded all as specified and directed. |
| 147 | Supply only for fixing capacitor 2.5 mfd±5%, 440 Volt, AC, 50/60Hz incl PVC clamp complete and all as specified. |
