|
| 1 | BUILDINGS & STRUCTURE (Sch \"A\" PART-I) |
| 2 | Lump sum price worked out by the Contractor for “BUILDINGS & STRUCTURE”as listed in Schedule ‘A’ Part-I.Representing ** ___ % ______ percent *Above / Below the lump sum price ofRs.4,63,30,400.00inserted by the MES in Schedule ‘A’ Part-I. |
| 3 | EARTHWORK, SITE CLEARANCE AND SITE DEVELOPMENT (Sch \"A\" PART-II) |
| 4 | Lump sum price worked out by the Contractor for “EARTHWORK, SITE CLEARANCE AND SITE DEVELOPMENT”as listed in Schedule ‘A’ Part-II.Representing ** ___ % ______ percent *Above / Below the lump sum price ofRs. 7,67,825.75 inserted by the MES in Schedule ‘A’ Part-II. |
| 5 | INTERNAL WATER SUPPLY (Sch \"A\" PART-III) |
| 6 | Lump sum price worked out by the Contractor for “INTERNAL WATER SUPPLY”as listed in Schedule ‘A’ Part-III.Representing ** ___ % ______ percent *Above / Below the lump sum price ofRs. 5,82,167.87inserted by the MES in Schedule ‘A’ Part-III. |
| 7 | INTERNAL ELECTRIFICATION (Sch \"A\" PART-IV) |
| 8 | Lump sum price worked out by the Contractor for “INTERNAL ELECTRIFICATION”as listed in Schedule ‘A’ Part-IV.Representing ** ___ % ______ percent *Above / Below the lump sum price ofRs. 15,23,118.26inserted by the MES in Schedule ‘A’ Part-IV. |
| 9 | ROAD, PATH, CULVERT & HARDSTANDING (Sch \"A\" PART-V) |
| 10 | Lump sum price worked out by the Contractor for “(ROAD, PATH, CULVERT & HARDSTANDING)”as listed in Schedule ‘A’ Part-V.Representing ** ___ % ______ percent *Above / Below the lump sum price ofRs. 24,83,855.18 inserted by the MES in Schedule ‘A’ Part-V. |
| 11 | SEWAGE DISPOSAL (Sch \"A\" PART-VI) |
| 12 | Lump sum price worked out by the Contractor for “(SEWAGE DISPOSAL)”as listed in Schedule ‘A’ Part-VI.Representing ** ___ % ______ percent *Above / Below the lump sum price ofRs.2,39,303.20inserted by the MES in Schedule ‘A’ Part-VI. |
| 13 | AREA DRAINAGE(Sch \"A\" Part-VII) |
| 14 | Lump sum price worked out by the Contractor for “(AREA DRAINAGE)”as listed in Schedule ‘A’ Part-VII.Representing ** ___ % ______ percent *Above / Below the lump sum price ofRs. 7,82,753.53inserted by the MES in Schedule ‘A’ Part-VII. |
| 15 | HOT WATER SUPPLY & SOLAR HOT WATER (Sch \"A\" Part-XVIII) |
| 16 | Lump sum price worked out by the Contractor for “(HOT WATER SUPPLY & SOLAR HOT WATER)”as listed in Schedule ‘A’ Part-XVIII.Representing ** ___ % ______ percent *Above / Below the lump sum price ofRs. 2,04,348.38 inserted by the MES in Schedule ‘A’ Part-XVIII. |
| 17 | EXTERNAL WATER SUPPLY (Sch \"A\" Part-IX) |
| 18 | Lump sum price worked out by the Contractor for “(EXTERNAL WATER SUPPLY)”as listed in Schedule ‘A’ Part-IX.Representing ** ___ % ______ percent *Above / Below the lump sum price ofRs. 2,34,794.72 inserted by the MES in Schedule ‘A’ Part-IX. |
| 19 | EXTERNAL ELECTRIFICATION(Sch \"A\" PART-X) |
| 20 | Lump sum price worked out by the Contractor for “(EXTERNAL ELECTRIFICATION)”as listed in Schedule ‘A’ Part-X.Representing ** ___ % ______ percent *Above / Below the lump sum price ofRs. 4,68,99,998.77 inserted by the MES in Schedule ‘A’ Part-X. |
| 21 | MISCELLANEOUS ITEMS REQUIRED FOR B/R & E/M SERVICES (Sch \"A\" PART-XI) |
| 22 | EARTHWORK, SITE CLEARANCE AND SITE DEVELOPMENTBringing approved Earth may be mixed with granules / pebbles not exceeding 40 mm size (as approved by Garrison Engineer) from sources outside defence land including all cost such as royalty if any, transportation, taxes if any etc. complete all as specified and directed.NOTE :-(a) Earth required for the item shall be supplied by contractor from outside of MOD land at any lead, at his own arrangement.(b) All cost of procurement of earth including cost of transportation, compaction royalties, tax etc shall be deemed to be included in the unit rate quoted by the contractor.(c) Forming embankments / filling in low lying areas including raising (or lowering) earth, spreading in layers not exceeding 30 cm thick, watering ramming / rolling and finishing of required size, shape etc not exceeding 1.5 m high from base / natural ground level.(d) With reference to Clause 3.6 of MES Schedule Part-II on Serial Page No. 21, it is clarified that measurement of the above item shall be of finished embankment / traverse of filled earth after consolidation / compaction and 5% deduction shall be made from measured and calculated volume to allow for increase in bulk.(e) Total quantity / partial quantity of earth may not be available in BENGDUBI Area. The contractor shall bring the earth outside area and it is advised to quote the rate considering available of soil and its lead involved. |
| 23 | INTERNAL WATER SUPPLYS&F two way bib cock with wall flange chromium plated with crutch or butterfly handle screwed down for iron pipe/CPVC pipe 20 mm bore and fixed complete all as specified and directed. |
| 24 | INTERNAL ELECTRIFICATIONS & F Modular type TV socket Co-axial socket (RJ-9) outlet 1 Module in themodular MS/ GI sheet Box and cover plate including concealed40mm PVC conduit in wall/ceiling/fixed to roof , connections etc complete all as specified and directed |
| 25 | S & F Modular type RJ-11 telephone socket outlet in the modular MS/GI sheet box and cover plate including concealed25 mm PVC conduitin wall/ceiling/fixed to roof , connections etc complete all as specified and directed. |
| 26 | S & F single pole & neutral double door DB, 6 way, modular type, double door, metallic distribution board conforming to IEC 61439-3, suitable for flush / surface mounting with provision for DP RCCB / RCBO / Isolator / MCB as incomer and SP MCBs as outgoing, reversible metal door, 100 A copper busbar, fully shrouded neutral bar, earth bar, wire set & cable ties for cable management, pre fitted masking sheet, etc. having IK 09 & IP 43 protection complete all as specified and directed. |
| 27 | S & F modular type 3/5 pin socket outlet including plug top 16 A controlled by switch 16 A includig sheet metal enclosure suitable for AC point complete all as specified and directed. |
| 28 | S & F 3-Star (EEL) LED lamp 5W capable to output 525 lm, 6500 K suitable base B22 with lamp holder B22 typecomplete all as specified and directed. |
| 29 | S & F Decorative wall fixture made up of Polycarbonate, suitable for 9 W retrofit LED lamp B22 base with LED lamp of 9W, 950 lm, 6500 K including connecting up with three core twisted flexible copper conductor cablecomplete all as specified and directed. |
| 30 | ROAD, PATH, CULVERT & HARDSTANDINGM&L reflective thermoplast white/yellow road marking paint laid down through road marking machine in layers of 3.00mm thick crystlese and use of 5kg per sqm by incorporating the white glass beads @ 300gms per sqm for reflecting including cleaning of surfaces complete all as specified and directed. |
| 31 | Supply and installation of Raised Pavement Marker (RPM) with polycarbonate lens electronically welded with the RPM body. The marker shall be scratch proof and abrasion resistant microprismatic polycarbonate lens with polycarbonate reflective panels with dual prismatic cubescapable providing total internal reflection.Dimension: The dimension of the marker is height 15.88mm, width 101.6mm, length 89.2mm. The marker conforms to ASTM D4280 and is in accordance with MOSRTH circular reference No. RW/NH 33023/10/97-DO III dated 11 June 1997. Marker shall be fixed with adhesive and no nails shall be used to affix the marker and shall be marked with manufacturer name. |
| 32 | Construction of 7.90 mtr long and 600 mm dia RCC NP2 Hume pipe Culvert incl excavation of earth work, PCC 1:3:6 type C-2 in fdn, Brick work in parapet, rendering in CM 1:4 and white washing complete all as specified and shown in drawings. |
| 33 | EXTERNAL WATER SUPPLYM&L for constraction of brick measonary valve pit of size 600 x 600 x 600mm (internal dimension) one brick thick wall in CM 1:4 on 100mm thick PCC 1:4:8 type 0-2(40m graded aggregate) as in foundation and 15mm thick rendring in cement mortar (1:4) internally, externally up to 15cm below GL, providing valve pit cover made of 3mm thick MS sheet/plate, welded with 40 x 40 x 5mm angle iron framed fixed on top of valve pit bymeans of hold fast 150mm long, embeded in PCC 1:2:4 type B-1 (20mm graded aggregate) block of size 230 x 200 x 100 mm and provision of hinges, handle and locking arrangement including two coats of anti corasive paint over a coat of red oxide zinc chrome primer and necessery excavation and work in soft/loose soil complete all as specified and directed. |
| 34 | EXTERNAL ELECTRIFICATIONS&F LED light fitting for steel for steel/security lighting energy saving and environmental friendly long life versatile pressure die-cast aluminum housing wih toughened glass and individual high lumen LED with secondary optics of capacity 60watt with minimum 120Lm/watt, 240 volts AC 50Hz, IP 66 protection suitable for 40mm dia GI pipe bracket includng five years on site warranty from manufacturer complete all as specified and directed. |
| 35 | S&F LED post top light fitting luminaries 40/45 watts IP 65 type made in die cast aluminium housing with decorative opal/clear polycarbonate diffuser complete with control gear box with all accessories duly prewired suitable for 50 mm dia post including GI medium grade 50 mm dia post dia postupto 1.0 height and polycarbonates junction box 150mm x 100m and singlephase connector complete connection and testing complete all as specified and directed. |
| 36 | S&F LED post top light fitting luminaries 40/45 watts IP 65 type made in die cast aluminium housing with decorative opal/clear polycarbonate diffuser complete with control gear box with all accessories duly prewired suitable for 50 mm dia post includingconnection and testing complete all as specified and directed. |
| 37 | S&F pole mounted SMC junction box/bus bar chamber for loopIN/OUT connection of street light cable of size 295 x195 x 100mm high heat distoration temp.non-fusing, shockproff, rustproof, 100% weatherproof, fire retardantclass FV-O as per IS11731 Part-II and suitable locking arrangement with single phase and neutral aluminium busbar of size 20 x 3 mm of length 170mm wrapped with PVC sleeves with maintained the colour code, MCB. In rail channel for mouting of one no MCB SP and provision of making holes with GI nuts, bolts, &washers for cable connections mounted on hydrographic insulators with nuts & bolts at both ends of busbar and fixed on pole steel/PCC with suitable two nos flat iron clamp 25 x 4 mm with nuts and bolts (duly painted with two coats of aluminium paint over a coat of red oxie primer) and dismanling of old uniserviceable one complete all as specified and as directed. |
| 38 | Supply and fixing in reapir PVC Sheathed multi stranded unarmed copper conductor cable LT 1100 volt grade Conforming to IS 7098 FRLS (inner sheet) of size 1.5 Sqmm 3 Core (Nominal Area) from pole junction box to light fitting with suitable size copper cable lugs and connector all complete as specified and directed. |
| 39 | Supply, installation, testing and commissioning outdoor type LT feeder pillar box, platform mounted, suitable for 3 phase 4 wire, 500 volts AC supply and type tested at CPRI, fabricated in factory having modern fabrication and testing facility which includes seven (07) tanks pre treatment facility comprising of de-greasing, rinsing, de-rusting, rinsing, phosphating, rinsing and passivation followed by powder coated painting (thickness not less than 80 Micron) with approved shade of RAL 7032. The panel shall be provided with suitable Neoprene rubber gasket to make it completely dust and vermin proof and degree of protection not less than IP-55 and general construction conforming to IS : 13947. made out of 3.00mm thick CRCA mild steel sheet and 3.00mm thick gland plate duly compartmentalized for each control gear and bus-bar, front door (02 layer) and rear Door (01 layer) opening facility and 4 side slanting canopy type roof on top and mild steel channel (75 MC) base frame at bottom. The feeder pillar shall be provided with ventilation facility in the form of louvers for better heat dissipation. The feeder pillar shall be comprising of the followings. (FPB-A) Item Continued as 11.19 |
| 40 | INCOMMING(a) Copper strip busbar of 150 amps rated capacity wrapped with PVC sleeves with maintained the colour code and provision of making holes with Copper nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends = 04 nos.(b) MCCB thermal magnetic release type, 4 poles, 415 Volts, Lcu = 25 KA breaking capacity, Icu=100% Ics rating 100 Amps including all fixing accessories with both ends spreader links - 01 No.(c) LED Neon indicator lamp (RYB) with holder and fuse holder 230/250 volts, AC -01 set (set of three) (d) Digital Ammeter of range (0-200) Amps, flush mounting type of size 100mm x 100mm (4\"x4\") square dial with CT\"s of ratio 100/5 and selector switch - 01 set.(e) Digital voltmeter of range (0-500) volts, flush mounting type of size 100mm x 100mm (4\"x4\") square dial with selector switch-01 No.OUTGOING(a) MCCB, adjustable thermal magnetic release type, 4 poles, 415 Volts, Ics = 100% Icu, 25 KA breaking capacity, rating 40 Amps including all fixing accessories with both ends spreader links -03 Nos(b) MCB SPN 10 amps 10 KA, C-series including connection complete all as specified and directed.- 01 No (Spare).(c) Enamelled iron danger notice plate of 1.60 mm thick mild steel sheet of size 200 mm X 150mm, white with letters, figures and conventional skull and bones in signal red and fixed with nuts and bolts on door / shutter of JB for LT-01 No. |
| 41 | Supply, erection, testing and commissioning outdoor type LT feeder pillar box, platform mounted, suitable for 3 phase 4 wire, 500 volts AC supply and type tested at CPRI, fabricated in factory having modern fabrication and testing facility which includes seven (07) tanks pre treatment facility comprising of de-greasing, rinsing, de-rusting, rinsing, phosphating, rinsing and passivation followed by powder coated painting (thickness not less than 80 Micron) with approved shade of RAL 7032. The panel shall be provided with suitable Neoprene rubber gasket to make it completely dust and vermin proof and degree of protection not less than IP-55 and general construction conforming to IS: 13947. made out of 3.00mm thick CRCA mild steel sheet and 3.00mm thick gland plate duly compartmentalized for each control gear and bus-bar, front door (02 layer) and rear Door (01 layer) opening facility and 4 side slanting canopy type roof on top and mild steel channel (75 MC) base frame at bottom. The feeder pillar shall be provided with ventilation facility in the form of louvers for better heat dissipation. The feeder pillar shall be comprising of the followings. (FPB-B) Item Continued as 11.21 |
| 42 | INCOMMING(a) Copper strip busbar of 100 amps rated capacity wrapped with PVC sleeves with maintained the colour code and provision of making holes with Copper nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends = 04 nos.(b) MCCB thermal magnetic release type, 4 poles, 415 Volts, Lcu = 25 KA breaking capacity, Icu=100% Ics rating 63 Amps including all fixing accessories with both ends spreader links - 01 No.(c) LED Neon indicator lamp (RYB) with holder and fuse holder 230/250 volts, AC -01 set (set of three) d) Digital Ammeter of range (0-200) Amps, flush mounting type of size 100mm x 100mm (4\"x4\") square dial with CT\"s of ratio 100/5 and selector switch – 01 set.(e) Digital voltmeter of range (0-500) volts, flush mounting type of size 100mm x 100mm (4\"x4\") square dial with selector switch - 01 No.OUTGOING(a) MCCB, adjustable thermal magnetic release type, 4 poles, 415 Volts, Ics = 100% Icu, 16 KA breaking capacity, rating 40 Amps including all fixing accessories with both ends spreader links -02 Nos(b) MCCB, adjustable thermal magnetic release type, 4 poles, 415 Volts, Ics = 100% Icu, 16 KA breaking capacity, rating 25 Amps including all fixing accessories with both ends spreader links -01 Nos(c) MCB SPN 10 amps 10 KA, C-series including connection complete all as specified and directed.- 01 No (Spare).(d) Enamelled iron danger notice plate of 1.60 mm thick mild steel sheet of size 200 mm X 150mm, white with letters, figures and conventional skull and bones in signal red and fixed with nuts and bolts on door / shutter of JB for LT-01 No. |
| 43 | SEWAGE DISPOSAL:-M&L for 150 mm dia Double wall Corrugated (DWC) HDPE pipe, grade \"A\" pressure rating SN-8 laid in trenches and jointed complete all as specified and directed. |
| 44 | M & L for 25 users RCC septic tank conventional designed to carry sewageand sullage water including excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 design mix in walls, base slab, baffle walls and roof slab including beams etc with vent shaft, manholes openings with cover connection etc with effective depth 1.5 metre and over depth of 3 mtr as shown in drawing No. CESZ/2020/TD/ST-07 complete all as specified and directed. |
| 45 | M & L for 1.80m x 3.00m effective depth soahage well excavation in any of soil foundation in PCC 1:3:6, walls of honeycombed masonary etc all as shown in Drawing No. SZ/TD/14 Sheet No. 1/1 complete filled with brick bats all as specified and directed. |
