|
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 2 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 3 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. |
| 4 | For thickness of tiles 10 mm to 25 mm |
| 5 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50m outside the periphery of the area cleared. |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 7 | 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 8 | 1:5:10 (1 cement : 5 coarse sand(zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 9 | Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification. |
| 10 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40mm dia. M.S. tube 1.5m centre to centre horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. |
| 11 | Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done. |
| 12 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 13 | Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : |
| 14 | 100X58X1.90 mm |
| 15 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : |
| 16 | 300x16 mm |
| 17 | 250x16 mm |
| 18 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 19 | a) 300x10 mm |
| 20 | 150x10 mm |
| 21 | Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 22 | 125 mm |
| 23 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 24 | Twin rubber stopper |
| 25 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc.,., complete. |
| 26 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kgper sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 27 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300mm or more (thickness to be specified by the manufacturer), of 1stquality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4(1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. |
| 28 | 12 mm cement plaster of mix : |
| 29 | 1:6 (1 cement: 6 fine sand) |
| 30 | 15 mm cement plaster on the rough side of single or half brick wall of mix : |
| 31 | 1:6 (1 cement: 6 fine sand) |
| 32 | 6 mm cement plaster of mix : |
| 33 | 1:3 (1 cement: 3 fine sand) |
| 34 | Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. |
| 35 | 12 mm cement plaster |
| 36 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. |
| 37 | New work (two or more coats) over and including water thinnable priming coat with cement primer. |
| 38 | Old work (one or more coats) |
| 39 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. |
| 40 | One coat. |
| 41 | Two or more coats |
| 42 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 43 | Two or more coats on new work. |
| 44 | One or more coats on old work. |
| 45 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 46 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 47 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) |
| 48 | Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface). |
| 49 | Old work (One or more coat applied @ 0.90 ltr/10 sqm). |
| 50 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge. |
| 51 | With cement mortar 1:4 (1 cement : 4 fine sand). |
| 52 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: at all floor levels |
| 53 | Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) |
| 54 | Dismantling G.I. pipes (internal/external work) including excavation and refilling trenches after taking out the pipes/ exposed pipes on walls, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : |
| 55 | 15 mm to 40 mm nominal bore |
| 56 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : |
| 57 | W.C. pan with ISI marked white solid plastic seat and lid |
| 58 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- |
| 59 | White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer. |
| 60 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. |
| 61 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 62 | 10 litre capacity - White |
| 63 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : |
| 64 | White solid plastic seat with lid |
| 65 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : |
| 66 | Flat back wash basin of size 550x400 mm. |
| 67 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 68 | Flexible pipe |
| 69 | 32 mm dia |
| 70 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : |
| 71 | Rectangular shape 453x357 mm |
| 72 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. |
| 73 | Waste coupling 31 mm dia of 79 mm length and 62 mm breadth weighing not less than 45 gms. |
| 74 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 75 | 20 mm nominal outer dia. Pipes. |
| 76 | 25 mm nominal outer dia .Pipes. |
| 77 | 40 mm nominal outer dia. Pipes. |
| 78 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : |
| 79 | 25 to 40 mm nominal bore |
| 80 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : |
| 81 | 15 mm nominal bore |
| 82 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 83 | 45 cm length (a)15 mm nominal bore |
| 84 | Providing and fixing cPVC Union/cPVC nipple in G.I/cPVC pipe including cutting and threading the pipe and making long screws etc. complete (New work) |
| 85 | 20 mm nominal outer dia. |
| 86 | 25 mm nominal outer dia . |
| 87 | 40 mm nominal outer dia. |
| 88 | Providing and fixing PTMT bib cock of approved quality and colour. |
| 89 | 15 mm nominal bore, 165 mm long. Weighing not less than 110 gms. |
| 90 | Providing and fixing PTMT stop cock of approved quality and colour. |
| 91 | 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 92 | Providing and fixing PTMT pillar cock of approved quality and colour . |
| 93 | 15mm nominal bore, 107 mm long. Weighing not less than 110 gms. |
| 94 | Providing and fixing PTMT grating of approved quality and colour. |
| 95 | Circular type. |
| 96 | 125 mm nominal dia with 25 mm waste hole. |
| 97 | Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms. |
| 98 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : |
| 99 | For fixed portion |
| 100 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 101 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). |
| 102 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 103 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 104 | With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) |
| 105 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 106 | Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. |
| 107 | Upto 5mm depth and 5 mm width |
| 108 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mitred joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with M.S hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. |
| 109 | (M.S hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/ window frames, minus 5mm tolerance in dimensions i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 110 | Frame size 65 x 100 mm |
| 111 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. |
| 112 | (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 113 | 30 mm thick |
| 114 | Dismantling Polyester powder coated / anodized aluminium partitions, doors and other frames including proper numbering, loading and unloading and placing at the required place in the building as directed by the Engineer-in-charge .( The rate includes the rectifying the damages made in the floors/masonry and concrete surfaces as directed by the Engineer-in-charge) |
| 115 | Fixing of aluminium partitions and doors after making required sections as per the drawingwith available material of aluminium sections, particle board, glass panels, neoprene gasket and snap on beading including fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions at top, bottom and sides with required PVC/Neoprene felt etc., aluminium sections shall be smooth, rust free, straight , mitred and jointed mechanically wherever required all complete as per the architectural drawings and the directions of the Engineer-in-charge. (The available material as above on as is where is basis in stacked condition will be supplied by the department at no cost. Finished area of partition is measured for payment) |
| 116 | Providing and fixing PTMT Two way bib cock or stop cock of approved quality and colour . |
| 117 | 15mm nominal bore, 107 mm long. Weighing not less than 110 gms. |
| 118 | Providing and fixing CPVC ball valve in CPVC pipe line including cutting and jointing with CPVC solvent cement etc. complete. |
| 119 | 20 mm nominal bore |
| 120 | 25 mm nominal bore |
| 121 | Providing and fixing PTMTHealth faucet with wall support lever of 15mm nominal bore withnozzle jet and handle of approved quality of approved quality and colour etc. all complete. |
| 122 | Providing and fixing Swan neck C.P.Brass long body Pillar cock of Parryware Claretmake (T4668A1) or approved equivalent . The pillar cocks are to be fixed by removing old pillar cocks including making necessary adjustments. All complete as per directions of Eng.-in-Charge. The rate is all inclusive nothing extra shall be paid on any account. a) 15mm dia nominal bore |
| 123 | Removal of vegetation at walls/roofs and floors/drainage systems/water supplying stream of the building/over head tanks or at any location and applying any special chemical to defective area to prevent vegetation growth and finishing the same with cement concrete/mortar to match the surface of walls/floors/roofs., etc. complete as per the directions of engineer-in-charge(cement concrete/mortar to be paid in separate item.)(Uprooting of vegetation in each location will be measured as one job) |
| 124 | Repairs to the existing Aluminium/PVC/Wooden doors/windows by removing and refixing the same after attending necessary repairs etc. with necessary screws, nails ,hinges etc. including welding etc. wherever required complete to make it working condition (Each door/window irrespective of size will be measured for payment. cost of Hinges, handles and other accessories if any will be paid separately). |
| 125 | Cleaning of existing sanitary pipe alignment of 160/110 /75 mm dia in vertical and horizontal direction of all floors and all heights by opening door bend , clearing the deposited obstacles including rodding and refixing the doors with new rubber washer and jointing the same job includes replacing door covers bolts and nuts wherever required to arrest the leakage all as per directions of Engineer-In-Charge(opening of each door bend and removal of blockages including above operations will be measured as one job.) |
| 126 | Rebate for taking away unserviceable material after fixing new material etc., complete a) 15 mm brass bibcock / stop cock/pillar cocks |
| 127 | Cleaning of terrace / canopy/ chajjas by removing leaves grass dust, rubbish and other deposited / accumulated materials etc. including removal of blockages/chockages of khurras/spouts of terrace/chajjas etc. and disposal of rubbish to the dumping ground out side periphery of the building. (plan area of the terrace/chajja/canopy will be measured for payment) |
| 128 | Terrace area connected to blocked khurras and spouts & like. |
| 129 | Chajjas area connected to blocked spouts & like |
| 130 | Cleaning of Under ground water storage tank or sump or over head tank of any capacity by following method: (1) Empty the tank/sump and make it to near dry, (2) Apply bleaching powder uniformly ( tank capacity @ 0.50gms/litre) surface of inside the tank/sump perfectly by removing scales on walls and wait for one hour (3) after one hour clean/rinse at the tank/sump with fresh water, repeat the above process, (2) and (3) for two to three times, (4) remove the mud/silt/sludge and garbage from the tank with specified sludge pump, (5) spraying anti bacteria agents on walls to kill harmful bacteria. Rate includes for all above operations including the equipment and material required for cleaning all complete as directed by the Engineer-in-charge. |
| 131 | a)Liquid capacity of water tanks of any capacityin litres is measured for payment |
| 132 | Cleaning of existing sewer lines, manholes etc. Cost includes all labour for removing the silt, slush, waste etc. and rodding the sewer lines and manholes by mobile sewer rodding equipment/manually from manhole to manhole to clear the blockage, chokages etc. for proper functioning of sewer lines( The payment shall be made for removal of blockages in between manhole to manhole as one job with all above operations.) |
| 133 | Providing and fixing Pre-cast Man hole trap cover of INDO/KITTO make or equivalent of 25mm thickness of size 675x 675 mm or of required size as per requirement for existing gully trap with necessary repairs etc. all complete as per the directions of Engineer-In-Charge |
| 134 | Repairs to pvc flush tank with replacing the lever or handle wherever required including changing the syphon set including cleaning the dirt, scales, adjustment in the flush mechanism etc., complete. Repairing as above for each tank is measured for payment. |
| 135 | Repairs to pvc flush tank with replacing the lever or handle wherever required but without changing the syphon set including cleaning the dirt, scales, adjustment in the flush mechanism etc., complete. Repairing as above for each tank is measured for payment. |
| 136 | Cleaning of Nahani trap / floor trap for removal of blockages including removing the silt, slush,, waste etc. ensuring smooth flow etc., and applying white cement in tile joints of bath/WC flooring around the trap wherever required to arrest the leakage. (Cleaning of trap is measured as one job) |
| 137 | Providing UPVC SWR pipes with working pressure 6kgf/sq.cm conforming to IS : 13592 Type B including jointing with \"T\" shaped seal/rubber ring conforming to IS : 5382 and with solvent cement or rubber lubricant as the case may be with pipes of outer dia (concealed pipe joints to be jointed with rubber ring and solvent cement and exposed joints to be jointed with rubber ring and rubber lubricant. (i)Single socketed pipe(couplings, other accessories will be paid separately) |
| 138 | 110mm diameter |
| 139 | 75mm diameter |
| 140 | Replacing existing on wall face damaged unplasticised - PVC moulded fittings/ accessories with new fittings/accessories for unplasticised Rigid PVC SWR pipes conforming to IS : 13592 Type A including cutting, replacing, jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. |
| 141 | Plain bend of required degree |
| 142 | 110mm bend |
| 143 | 75mm bend |
| 144 | Tee with door |
| 145 | 110X110X110 |
| 146 | 75X75X75 |
| 147 | Door bend |
| 148 | 110mm |
| 149 | 75mm |
| 150 | Providing and fixingplain junction floor trapof required degree unplasticised - PVC moulded fittings/ accessories with new fittings/accessories for unplasticised Rigid PVC SWR pipes conforming to IS : 13592 Type A including cutting, replacing, jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. : |
| 151 | 110x110x75 mm With out Jali |
| 152 | Carting out of building rubbish / malba / similar unserviceable, dismantled, excavated or waste materials by mechanical means, through private carrier including lifting, loading, transporting, unloading to municipal dumping ground beyond 50 m initial lead,or in any other compound as decided by the Engineer-in-charge, for all leads including all lifts involved. |
| 153 | Providing and laying vitrified heavy duty parking tiles in different sizes 12mm thickness (to be specified by the manufacturer) with water absorption less than 0.08% of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. |
| 154 | Providing and fixing Brass MABT/FABT including cutting and threading the GI pipe Line and connecting to CPVC line wherever required etc. complete |
| 155 | 20 mm nominal bore |
| 156 | 25 mm nominal bore |
| 157 | 40 mm nominal bore |
| 158 | Providing and fixing CPVC ball valve in CPVC pipe line including cutting and jointing with CPVC solvent cement etc. complete. |
| 159 | 20 mm nominal bore |
| 160 | 25 mm nominal bore |
| 161 | 40 mm nominal bore |
| 162 | Providing and fixing Matt finished 1mm thick Stainless steel sheetinauguration board of size 530 x 760 mm,fixed to 4mm thick MDF board fixed with SS Mirror screws and washers, finished with approved design , logo andlettering with etching on Matt surface etc. all complete as per the directions of engineer in charge. The rate is inclusive of all operations nothing extra shall be paid on any account. |
| 163 | Providing and fixingfactory made WPC (Wood Polymer Composite) beading decorative type used for decoration in walls/ceiling etc. fixed with adhesive, SS screws and rawl plugs and giving neat finish wherever utilized etc. complete as per the directions of engineer in charge. The rate is inclusive of all operations nothing extra shall be paid on any account. |
| 164 | (a) 30 x 15 mm |
| 165 | (b) 22 x 12 mm |
| 166 | Providing and fixing of sun control filmover glass windows with out any bubbling over the surface and making surface good etc. all complete as per the directions of Engineer in charge. |
| 167 | Providing and fixing nylon sliding roller wheel 20mm diaunder the aluminium window shutters for arranging sliding movement to movable shutters of required colour or shade with nuts and screws etc. complete : . |
| 168 | Deep cleaning offlooring tiles , partitions walls full height and glass panes and including the toilet floor and dadoing tiles of height 1.50m including cleaning of sanitary fittings like wash basins, water closets, flush tank, urinals, granite platform etc., complete by using chemical, detergents with hand machine etc., complete as per directions of Engineer-in-Charge. |
| 169 | Removingof venetion blinds of any size for windows and refixing of the same venetion blinds by attending repairs including washing of blinds and refixing to the existing window. Rate includesattending repairs, including washing the venetion blinds by removing dirt, dustetc., complete, including necessary chains, ropes, all labour, transportation of venetion blinds for attending repairs, washing etc., allcomplete and as per directions of Engg.-in-Charge. |
