|
| 1 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: |
| 2 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 3 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer, of required shade and colour all complete : |
| 4 | New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre |
| 5 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: |
| 6 | Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 7 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 8 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade. |
| 9 | Old work (one or more coats) |
| 10 | Two or more coats on old work |
| 11 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 12 | One or more coats on old work. |
| 13 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 14 | Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface). |
| 15 | Old work (One or more coat applied @ 0.90 ltr/10 sqm). |
| 16 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge. |
| 17 | With cement mortar 1:4 (1cement: 4 coarse sand). |
| 18 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: |
| 19 | Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
| 20 | Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) |
| 21 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with \"S\" or \"P\" trap including dismantling of old WC seat and \"S\" or \"P\" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. |
| 22 | Orissa pattern W.C Pan of size 580x440 mm |
| 23 | Arranging services of assistant carpenter/ fitter for miscellaneous carpentary/ Plumbing repair works including all the necessaty tools and plants required for carrying out such type of works all complete as per the direction of Engineer in charge. |
| 24 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 25 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 26 | 10 litre capacity - White |
| 27 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 28 | Semi rigid pipe |
| 29 | 32 mm dia |
| 30 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. |
| 31 | Waste coupling 31 mm dia of 79 mm length and 62 mm breadth weighing not less than 45 gms. |
| 32 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 33 | 20 mm nominal outer dia. Pipes. |
| 34 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : |
| 35 | 15 mm nominal bore |
| 36 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 37 | 45 cm length |
| 38 | 15 mm nominal bore |
| 39 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. |
| 40 | 20 mm nominal bore, 120 mm long. Weighing not less than 198 gms. |
| 41 | Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms. |
| 42 | Providing Mannual assistance for miscellaneous repair works, cleaning works, help to carpernter/ fitter etc; as per site requirement and as per direction of Engineer-in-Charge. |
| 43 | (Note: One Man day shall be treated as One job) |
| 44 | Cleaning and desilting of manholes, gully traps and associated sewer lines, etc.,at all depths. The sewer line shall be cleaned using manila ropes and colth balls tied with the flexible bambo strips all complete as per the direction of Engineer in Charge. (Notes: 1. The cost includes all labour for removing the sludge, silt, slush, waste etc., from manhole and the sewer lines to clear the blockage, including chokes in gully traps etc.and disposing the waste outside the municipal area in covered machanical transport all complete as per the direction of Engineer in charge. |
| 45 | 2. Standard Operating Procedure for cleaning of sewer and septic tank issued by Central Public Health and Environmental Engineering Organization (CPHEEO) Ministry of Housing and Urban Affairs, Government of India. All the safety instruction as prescribed in Standard Operating Procedure shall be strictly followed.) |
| 46 | Providing and fixing/ replacing in position precast RCC manhole cover without frame of required shape and approved quality including disposal of the damaged cover outside the compound etc., complete as per the directions of Engineer-in-charge |
| 47 | Upto 680mm x 520 mm size & 25 mm thick for manholes/RCC OH Tanks covers. |
