Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frames not exc 1.5 sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed by Engr-in-charges. |
| 2 | Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters (without taking off shutters from the frame) complete all as specified and directed by Engr-in-charges. |
| 3 | Taking down shutter of any description, exc.1 Sqm but n exc 2 Sqm each complete all as specified and directed by Engr-in-charges. |
| 4 | M & L for Mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors and frame ; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165. complete all as specified and directed by Engr-in-charges. |
| 5 | M & L for mild steel framed work as in brackets etc for coller stands etc framed steps etc complete using MS angle iron Steel bars gusset plate etc confirming to Fe 290 Gde E-165 complete all as specified and directed by Engr-in-charges. |
| 6 | S&F mild steel frame work as in stairs ,hand railings, half roundor other stock section or section or core for wooden hand rail straidgt portion drilled and countershunk for balusters running bars for doors balusters nosing to steps including embeded in concrete and screwing etc hid ties for roof including necessary drilling bolting or riveting etc and similar work confirming to Fe 290 Gde E-165 complete all as specified and directed by Engr-in-charges. |
| 7 | S&F for Mild steel Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting platesbracket framing including distance pieces, cleats etc Fe-410-W (Gde-E-250) quality complete all as specified and directed by Engr-in-charges. |
| 8 | Taking out from position framed woodwork as in cupboards/cabinets etc with all fittings ,shutters, shelves, drawers etc in any position fixed in walls or floors & removal of the rubbish outside MD land all as directed at site for overall sizes exc 0.50 sqm but nexc 1.50 sqm& depthd nexc 60 cm complete all as specified and directed by Engr-in-charges. |
| 9 | M&L forUPVC Caoted Celuka printedin one of two different colours( with wood grain printed pattern/ivory clour finish) polyvinyl chloride (PVC) sheetframe of width 150mm & 18mm thickness made out of extruded 18mm PVC sheet andjoined with suitable Cement Solvent adhesive and screw.Theframe shall be fixed to the wall using 75mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 3 Nos. of screws to be provided for each vertical member & minimum 2 Nos. for horizontal member etc, all as per manufracturers specifications, complete all as specified and directed by Engr-in-charges. |
| 10 | M&L for 18 mm thick solid PVC sheetUPVC Caoted Celuka printedin one of two different colours( with wood grain printed pattern/ivory clour finish) as in kitchen cabinet shutters ,all round body of cabinets , shelves ,drawers etc cut to required size jointed with solvent cement & steel screws etc complete all as specified and directed by Engr-in-charges. |
| 11 | S&F 30 mm width offlaps (when open) continious pianohinges, stainlesssteel, complete assembly complete all as specified and directed by Engr-in-charges. |
| 12 | M&L for Extra over solid PVC sheet for fixing 18 mm width & 2-3 mm thick PVC coloured lipping of approved design & colour fixed with solvent cement or headless nails, complete all as specified and directed by Engr-in-charges. |
| 13 | S&F \"0\" degree stainless steel clip type self closing hinges for cabinets fixed with cadimum coated screws, complete all as specified and directed by Engr-in-charges. |
| 14 | S&F 75mm size bright finished cromium plated steel handleof approved shape & design fixed with cadmium coated screws on the kitchen cabint drawers complete all as specified and directed by Engr-in-charges. |
| 15 | S&F magnetic catchesfor cabinets of size 50 mm complete with striking plate & magnetic stud complete all as specified and directed by Engr-in-charges. |
| 16 | S&F stainless steel drawer runners folding typewith guide channels & sliding channel with approipiate ball bearing/ rollers etc complete to obtain smooth movement of the drawers. complete all as specified and directed by Engr-in-charges. |
| 17 | M&L for stainless steel tray of grade SS-304 as per trade patternof various sizes for drawer to keep the kitchen utensil complete all as specified and directed by Engr-in-charges. |
| 18 | S&F as in repairs for fabrication of pressed steel cupboard shuttersusing 1.00 mm thick MS plain sheet & with frame 1.25 MM thick bent to shape incl two coats of syn enamel paint on int surfaces & two coats of hammer tone finish on external surfaces alongwith locking arrangement mortice lock handle etc complete all as specified and directed by Engr-in-charges. |
| 19 | S&F for (a) of factory made 2nd class hardwood 35mm thick gauzed/Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed by Engr-in-charges.(b) SS wire cloth 0.36mm nominal dia of wire, average width of aperture 1.40mm fixed with SS wire staple.(c) Aluminium Grill Medium grade mess size 50x50mmx5mm , fixed at outer edge of door.(d) Apply one coat of Pink-Primer |
| 20 | S&F for Flush shutters 35 mm thick, solid core construction and plywood face is covered with decorative face with sunmica / veneer with lipping frame edging to match with mortic lock and handle. The face panel comprising of ply wood or cross band and face veneers shall be glued by hot pressed process. The over all finished thickness of face panel shall not be less than 35mm while the thickness face veneer shall not be less than 0.6 mm complete all as specified and directed by Engr-in-charges. |
| 21 | S&F for 35mm thick IInd Class HW factory made partly gauged/glazed and partly panelled shutters, openrebated and prepared to receive wire gauze etc, edge of framing shall be plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc complete all as specified and directed by Engr-in-charges.(a) SS wire cloth 0.36mm nominal dia of wire, average width of aperture 1.40mm fixed with SS wire staple.(b) Aluminium Grill Medium grade mess size 50x50mmx5mm , fixed at outer edge of door.(c) Apply one coat of Pink-Primer |
| 22 | S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed by Engr-in-charges. (M.S. hold fast/ lugs or SS dash fasteners shall be measured and paid for separately). |
| 23 | Providing & Fixinng Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite /borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed by Engr-in-charges. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 24 | Taking down steel window/ ventilator any size and description complete all as specified and directed by Engr-in-charges. |
| 25 | S&F Factory made box type steel window with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed by Engr-in-charges. (with or without cooler opening as directed by engr-in-charge) |
| 26 | S&F Factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified. (with or without cooler opening complete all as specified and directed by Engr-in-charges. |
| 27 | S&F Factory made box type steel ventilator with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed by Engr-in-charges. |
| 28 | S&F Factory made box type steel ventilator without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed by Engr-in-charges. |
| 29 | S &F of stainless steel butt hinges 100 mm size for WPC door complete all as specified and directed by Engr-in-charges. |
| 30 | S &F of mild steel butt hinges 100 mm size complete all as specified and directed by Engr-in-charges. |
| 31 | S&F 100mm size Mild steel single action door spring hinge complete all as specified and directed by Engr-in-charges. |
| 32 | S&F Magic eye brass body 15 to 20 mm dia all as per sample including drilling necessary hole in panel door shutter complete all as specified and directed by Engr-in-charges. |
| 33 | S&F of aluminium anodized barrel tower bolt of size 200 mm long incl necessary screw complete all as specified and directed by Engr-in-charges. |
| 34 | S&F aluminum anodisedhandle of size 150mm long long necessary \"Bow Handle D type\" complete all as specified and directed by Engr-in-charges. |
| 35 | S&F for aluminium alloy anodised sliding door bolt woth hasp and stalpe (bolt type and fixings clips of sheet cast or extruded sections and fixings bolts and sliding bolts of extruded sections and fixed 16mm dia and 300mm long complete all as specified and directed by Engr-in-charges. |
| 36 | S&F floor door stopper of alluminium alloy body and toungue anodised with hard drawn steel spring 140mm long complete all as specified and directed by Engr-in-charges. |
| 37 | S&F for 4 mm thick pin headed sheet glass panes of size not. exceeding 0.5 Sqm fixed with oil putty complete all as specified and directed by Engr-in-charges. |
| 38 | S&F for 3 mm thick plain glass ordinary quality & glazing complete all as specified and directed by Engr-in-charges. |
| 39 | S&F for galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width ofaperature 1.00 mm complete all as specified and directed by Engr-in-charges. |
| 40 | S&F in repair galvanised mild steel wire cloth 0.56mmnominal dia of wire and average width ofaperature 1.00 mm with necessary fitting on steel/ wooden surface complete all as specified and directed by Engr-in-charges. |
| 41 | M&L for PCC 1:2:4 type B1 Mix using 20mm graded stone aggregate as in hold fast iron fixing,coping, chamfered edgesincluding necessary form work complete all as specified and directed by Engr-in-charges. |
| 42 | S&F for Mild steel flat iron for hold fast and similar workconfirming to Fe-290Gde-E-165 fixed with welding and necessary item complete all as specified and directed by Engr-in-charges. |
| 43 | Demolition of stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engr-in-charges. |
| 44 | M&L for cutting in to old masonry to form toothings for bonding in new brick or stone work including making good in cement mortar 1:6 complete all as specified and directed by Engr-in-charges. |
| 45 | M&L for squarred rubble walling Jodhpur type regular coursed well bonded ,bedded and solidly hearted built in cement mortar 1:6 complete all as specified and directed by Engr-in-charges. |
| 46 | All as per item No 45 above but except stone incl cleaning, removal of CM from existing complete all as specified and directed by Engr-in-charges. |
| 47 | M&L PCC solid building blocks 10 cm thick type B1 1:2:4set in cement mortar (1:6) complete all as specified and directed by Engr-in-charges. |
| 48 | Extra over squared rubble stone walling Jodhpur type regular course for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing complete to squared rubble walling, regular coursed, Jodhpur type complete all as specified and directed by Engr-in-charges. |
| 49 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) andrubbish off the premises complete all as specified and directed by Engr-in-charges. |
| 50 | M&L for 25mm thick plain cement concrete1:2:4 type B-0 (12.5mm graded aggregate) as in subbase of floor tiles (using 12.5 mm graded crushed stone aggregate) complete all as specified and directed by Engr-in-charges. |
| 51 | M&L for 15 mm thick screed bed or bedding layer in CM 1:6 floor finished even & rough to receive tiling/floor finishes complete all as specified and directed by Engr-in-charges. |
| 52 | M&L for Non-skid coloured ceremictiles joint less 7 to 8 mm thick area of each tiles exceeding 0.18 Sqm but n.exc.0.38 sqm in floor etc set jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and directed by Engr-in-charges. |
| 53 | All as per above 52 but as in skirting including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed by Engr-in-charges. |
| 54 | M&L Non skid ceramic colour joint free tiles 6 to 7 mm thick of each tile exc 0.11 sqm but area n. exc 0.18 Sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed by Engr-in-charges. |
| 55 | M&L for glazed colour ceramic tiles of size 300x450x7mm thick, laid in vertical surface dado/skirtingjoint free etc, set and jointed in neat cement slurry and pointed in coloured tiles to match the shade of tiles(High-lighter pattern) including10mm thick rendering in CM 1:4 over stone masonary surfaces finished even & rough to receive tiling etc finish complete all as specified and directed by Engr-in-charges. |
| 56 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed by Engr-in-charges. |
| 57 | M & L 18 to 20 mm thick machine cut Kota stone slab flooring , staircase from etc over screed bed base ,laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and polishing icluding 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed by Engr-in-charges. |
| 58 | M & L 18 to 20 mm thick machine cut Kota stone in riser of steps, skirting, dado and piller laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and polishingincluding 10 mm thick rendering in cement mortor 1:4 complete all as specified and directed by Engr-in-charges. |
| 59 | M & L18- 20 mm thick machine cut Kota stone in shelves and other places etc laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and polishing complete all as specified and directed by Engr-in-charges. |
| 60 | M & L 18 to 20 mm thick machine cut one side polished black granite in kitchen plate form and windows cill, set and jointed, laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including screed bed, rubbing,moulding and polishing complete all as specified and directed by Engr-in-charges. |
| 61 | Taking down existing cementplaster including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-charges. |
| 62 | M&L for 15 mm thick rendering CM (1:4) over stone masonary surfaces finished even & smooth without extra cement complete all as specified and directed by Engr-in-charges. |
| 63 | M&L Rendering 10 mm thick CM (1:3) on concrete surfaces on ceiling / facia of RCC roof projection at any height etc complete all as specified and directed by Engr-in-charges. |
| 64 | M&L for 15mm thick rendering in CM 1:6 finished even and smooth without extra cement on stone wall surface complete all as specified and directed by Engr-in-charges. |
| 65 | M&L for Add or deduct to/from the rates for rendering in CM 1:6 for each 5 mm thickness over or under 10mm complete all as specified and directed by Engr-in-charges. |
| 66 | Supply only Integral water proofing compund complete all as specified and directed by Engr-in-charges. |
| 67 | Racking out joints/pointing to Square rubble masonryJodhpur type regular coursed built in cement mortar complete all as specified and directed by Engr-in-charges. |
| 68 | M&L for Keyed pointing to square rubble masonryJodhpur type regular course in CM 1:3 complete all as specified and directed by Engr-in-charges. |
| 69 | M&L preperartion ofnewly plastered surfaces on wall and applying one coat of 1-2 mm wall putty with fair finished and even surface and applying two coat of oil bound distemper over a coat of primer complete all as specified and directed by Engr-in-charges. |
| 70 | M&L for complete removal of existing distempered surfaces of walls and applying two coats of oil emulsion distemper of white shade or other approved shade over 1-2 mm of birla white putty on plastered surface complete all as specified and directed by Engr-in-charges. |
| 71 | M&L for applying three coats of white wash on newly plastered surface of ceilingincluding preparation of serfaces complete all as specified and directed by Engr-in-charges. |
| 72 | M&L for applying three coats of white wash on newly plastered surface of wall including preparation of serfaces complete all as specified and directed by Engr-in-charges. |
| 73 | M&L for applying one coats of white wash onold surface of wall complete all as specified and directed by Engr-in-charges. |
| 74 | M&L for applying one coats of white wash on old serface of ceilingcomplete all as specified and directed by Engr-in-charges. |
| 75 | M&L for applying two coats of cement based paint on newly plastered/ unplastered surface of wall including preparation and one coat of chalk whiteof serfaces complete all as specified and directed by Engr-in-charges. |
| 76 | M&L for applying one coat of cement base paint on old surfaces including preparation complete all as specified and directed by Engr-in-charges. |
| 77 | M&L for applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified and directed by Engr-in-charges. |
| 78 | M&L for applying two coats of synthetic enamel paint on steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of surfaces complete all as specified and directed by Engr-in-charges. |
| 79 | S&F for Stainless steel25mm curtain rodwith fixing brackets, knob etc as in repairs complete all as specified and directed by Engr-in-charges. |
| 80 | S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide 600mm long with aluminium alloy brackets and gaurd and railing 60cm long complete all as specified and directed by Engr-in-charges. |
| 81 | S&F in repair corner glass shelf assembly consisting of 5.5mm thick sheet glass of size 250 mm conical shape /size with CP brackets, gaurd and railing complete all as specified and directed by Engr-in-charges. |
| 82 | S&F in repair wall mounted Stainless steel Soap dish of size 125x75mm any type, fixed to plugs with chromium plated brass screws complete all as specified and directed by Engr-in-charges. |
| 83 | S&F in repair CP brass towel rail 20 mm outer dia `D’ type, 60 cm long between flanges with and including chromium plated brass screws and plastic rawl plugs/cleats, complete all as specified and directed by Engr-in-charges. |
| 84 | S&F as in repairs Bevelled edge mirror of size 600x450mm of selected quality glass mounted on PVC frame fixed to wooden plugs with chromium plated brass screws and cup washres complete all as specified and directed by Engr-in-charges. |
| 85 | S&F in repair satainless steel chromium plated peg set of six fixing with wall screws and plastic rawl plugs/cleats complete all as specified and directed by Engr-in-charges. |
| 86 | S&F in repairsinks made of stainless steel 1.00 mm thick kitchen with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or fixing in RCC slab and connecting waste coupling and to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engr-in-charges. |
| 87 | S&F Stainless steel Plate Racks made of stainless steel0.60 mm thick with plugs, washers and fixed with bolts /screws of size 750 X 600 X 250 mm asin repair complete all as specified and directed by Engr-in-charges. |
| 88 | S&Fas in repairs of vitreous china clay water closet squatting pan ORISSA Pattern size 580x 440 mm white with integral foot rest incl \"P\" or \"S\" traps,long bend flush pipe of 32mm dia HDPE pipe etc complete all as specified and directed by Engr-in-charges. |
| 89 | S & F as in repairsvitreous china wash down water closet Anglo Indian Type pedestal pattern with seat & cover complete incl fixing of long bend flush pipe etc complete all as specified and directed by Engr-in-charges. |
| 90 | S & F in repairVitrous china wash basin, white flat/ Corner back size 450x300 mm including , waste pipe, MS brackets complete all as specified and directed by Engr-in-charges. |
| 91 | Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 110mm bore complete all as specified and directed by Engr-in-charges. |
| 92 | Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 75mm bore complete all as specified and directed by Engr-in-charges. |
| 93 | S&F 100 mm dia cast iron (sand cast)soil waste and vent pipes in any length with or without ears with lead joints laid in trenches or in floor complete all as specified and directed by Engr-in-charges. |
| 94 | S&F 75 mm dia cast iron (sand cast) soil waste and vent pipes in any length with or without ears with lead joints laid in trenches or in floor complete all as specified and directed by Engr-in-charges. |
| 95 | S&F 100 mm dia cast iron (sand cast) soil waste and vent pipes in any length with or without ears with lead joints fixed on wall complete all as specified and directed by Engr-in-charges. |
| 96 | S&F 75 mm dia cast iron (sand cast) soil waste and vent pipes in any length with or without ears with lead joints fixed on wall complete all as specified and directed by Engr-in-charges. |
| 97 | S&F100 mm CI branch pieces single socketed Y equal or unequalfixed with lead joints complete all as specified and directed by Engr-in-charges. |
| 98 | S&F75 mm CI branch pieces single socketed Y equal or unequalfixed with lead joints complete all as specified and directed by Engr-in-charges. |
| 99 | S&F100mm CIbends any radius fixed with lead joints complete all as specified and directed by Engr-in-charges. |
| 100 | S&F 75 mm dia CI bend with oval acess door fixed to pipefixed with lead joints complete all as specified and directed by Engr-in-charges. |
| 101 | S&F 100mm dia CI vent cowlfixed to pipe complete all as specified and directed by Engr-in-charges. |
| 102 | S&F for Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof as in repairs complete all as specified and directed by Engr-in-charges. |
| 103 | S&F in repairs PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75mm dia of outlet complete all as specified and directed by Engr-in-charges. |
| 104 | M&L in repair for 150x150mm size, type P salt glazed stone ware gully traps,square mouldedfixed complete all as specified and directed by Engr-in-charges. |
| 105 | S&F as in repairsof 15 mm dia Cast Copper alloy bib cock long body with flange withchromium plated fixed withiron pipe complete all as specified and directed by Engr-in-charges. |
| 106 | S & F as in repairs 15 mm dia Cast Copper alloy angular /stop cock with chromium plated long threadwith flange complete all as specified and directed by Engr-in-charges. |
| 107 | S & F as in repairs 15 mm dia Cast Copper alloy two way angular/ stop cock with chromium plated long threadwith flange complete all as specified and directed by Engr-in-charges. |
| 108 | S&F as in repairs stainless steel CP Jet spray as in repair with 15mm x 900mm tube as specified and directedas per sample approved by Engr in chargecomplete all as specified and directed by Engr-in-charges. |
| 109 | S&F as in repairs15mm bore CP brass Sink mixer with regular spout wall mounted and brass nuts ISI Marked complete all as specified and directed by Engr-in-charges. |
| 110 | S&F as in repairs15mm bore CP central hole basin mixer single cock wall mounted swing spout popup waste system with 450mm long copper pipe and brass nuts ISI Marked complete all as specified and directed by Engr-in-charges. |
| 111 | S& F as in repairs chromium plated Wall mixture 3-in-1 system fancy type, cast copper alloy, with capstan heads, screwed down high pressure pipe 15mm bore, Hot or Cold, screwed for iron pipe with adujstable wall flange and legs complete all as specified and directed by Engr-in-charges. |
| 112 | S&F in repair of chromium plated shower rose 150x150mm dia square with shower arm complete all as specified and directed by Engr-in-charges. |
| 113 | Supply & Fixing low level flusing cistern PVC 10 ltrs capacity with float valves (ISI Marked) white with inlet ball valve including float and includign pvc connection complete all as specified and directed by Engr-in-charges. |
| 114 | S&F for 750 Ltrs capacity of tank rotational moulded polythene water storage tanks (cylindrical vertical with closed top hoisted and fixed in position white/colouredincluding tank led cover with fixing arrangement inlet/outlet/over flow checknut etc as in repairs complete all as specified and directed by Engr-in-charges. |
| 115 | S & F in repair 20mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed by Engr-in-charges. |
| 116 | S &F in repair 25 mm dia stop valves, cast copper alloy withscrew down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed of 25mm dia complete all as specified and directed by Engr-in-charges. |
| 117 | S &F in repair 20 mm dia stop valves, cast copper alloy withscrew down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed of 25mm dia complete all as specified and directed by Engr-in-charges. |
| 118 | M&L for 100 thick PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in water tank plateform over roof top finished even and smooth complete all as specified and directed by Engr-in-charges. |
| 119 | Demiolition of reinforced cement concrete of as staircase, landing, chajjas and similar suspended work of any description and any position not otherwise complete all as specified and directed by Engr-in-charges. |
| 120 | M&L forProviding precast RCC type B1 1:2:4 (using 20mm graded aggregate) as in cover slab for man holes set in CM 1:6 complete all as specified and directed by Engr-in-charges. |
| 121 | M&L 50mm thick sand stone slabs machine cutin sunshades, chajjas, shelves, cills, landings cover slabs on manholes stones templates etc n exc 2m in length punched dressed on face and along exposed edges self faced on other side and set and pointed in cement mortar 1:4 thickness including dismantling old stone patti complete all as specified and directed by Engr-in-charges. |
| 122 | Taking down or up steel tubing and connection including cleaning for refixing or removal to store complete all as specified and directed by Engr-in-charges. |
| 123 | (a) 25 mm dia |
| 124 | (b)20 mm dia |
| 125 | (c ) 15 mm dia |
| 126 | S&F of galvanized Iron water tubing, medium grade,with all fittings fixed to wall complete all as specified and directed by Engr-in-charges. |
| 127 | (a) 25 mm dia, |
| 128 | (b)20 mm dia |
| 129 | (c ) 15 mm dia including cutting chases, pinning in & making good to disturbed portion to match the existing surface etc complete all as specified and directed by Engr-in-charges. |
| 130 | Demolition of reinforced cement concrete of any description for roof,colums, beam of any type etc complete all as specified and directed by Engr-in-charges. |
| 131 | Use and waste of formwork to sides and soffits of slabs n. exc. 200 mm thick and similar works fair finished surfaces of concrete complete all as specified and directed by Engr-in-charges. |
| 132 | Use and waste of From work to edge of concrete flats, treads, breaks in floors, window cills, concrete railing, opening in concrete walls, floor and roofs n exc 20 cm wide and side of RCC/PCC bands in walls horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide with fair finished surfaces complete all as specified and directed by Engr-in-charges. |
| 133 | Use and waste form work to sides and soffits of floor or roof beams, lintel, cantilevers, shelves etc. including support of fair finished surfaces complete all as specified and directed by Engr-in-charges. |
| 134 | M & L RCC design mix M-25 using 20 mm graded stone aggregate as in slab supported on wall, roof slab, chijjaand in shelveetc complete all as specified and directed by Engr-in-charges. |
| 135 | M & L RCC design Mix-25using 20 mm graded stone aggregate as in beam, roof beam, cantilevers, lintel beam, etc. complete all as specified and directed by Engr-in-charges. |
| 136 | S & F mild steel TMT bar10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam , slab etc hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed by Engr-in-charges. |
| 137 | S & F mild steel TMT bar6 to 8 mm dia cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam , slab etc hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed by Engr-in-charges. |
| 138 | S & F mild steel TMT bar 5 dia and over upto and including 10 mm dia as in stirrups cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam etc hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed by Engr-in-charges. |
| 139 | M&L for 30 mm thick guniting in patches on to the required area on RCC columns, beams, stairs, lintels, retaining walls, sunshades, roofing slab etc. of all sizes and shapes at any heights from existing ground floor and at any locations with cement and mortar 1:2 (1 cement : 2 sand) under 2 to 2.8 Kg/Cm2 pressure after removing the damaged loose spalt concrete as specified here in before and applying one coat of rust convertor/kp-100 equivalent grade over reinforcement wherever necessary providing and tying in position 25mmx25mmx12 gauge dia wire MS welded mesh or smaller size over treated surface ready to receive grouts, curing for 10 days etc,loose spalt concrete portions by chipping, removal of dustover treated surface and applying 5mm to 10mm thick plastering in CM 1:4 to match existing surfaces and finished even and smooth including curing for 10 days etc, and removing the debris out side the MOD land in low lying areasand leveling complete all as specified and directed by Engr-in-charges. |
| 140 | M& L for roof treatment in the following stages :- (a) first Course :M&L for15 mm thick plaster with CM 1:3 mixed surface even and smooth with water proofing compound as per manufacturee instructions (Note: - WPC shall be measured and paid separately).(b) Material and labour for UV stable single component fibre reinforced elastomeric liquid applied water proofing membrane having solid content of 55% formulated wih PU hybrid polymers and reinforcing acrylic fibres and having sun reflectivity Index (SRI) of 106 over laying of Geofibre mesh over a coat of primer. The application of the material should be done in three coat (6 hr gap after each coat) on the substrate, applying first self priming coat at ratio of damp proof ultra and water 3:1 then 2 undiluted coat of damp proof ultra obtaining coverage @1 ltr/10 sqft in two coats (10-12 hrs gap between each coat. The vital physical and chemical parameters shall be as under. Min elongationat break of 350%, crack bridging ability of 2.5 mm @ 650 microns thickness, resists positive hydrostatic pressure of up to 10 bars. The material shall be appliied with brush or roller, complete in all respect complete all as specified and directed by Engr-in-charges. consultant. Also, proper surface preparation along with covingat corners is must.Note : - 1.The authorized applicator of manufacturer shall be approved by GE. |
| 141 | Demolition of cement concrete in ground floors and pavings n. exe 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in-charges. |
| 142 | M&L 50mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar places, finished even and smooth without using extra cement including cutting of joints n.exc 3.0 mtr length complete all as specified and directed by Engr-in-charges. |
| 143 | M&L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base flooring, path and sub foundation filling and mass concrete etc complete all as specified and directed by Engr-in-charges. |
| 144 | M&LProviding and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed by Engr-in-charges. |
| 145 | M&L forProviding and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed by Engr-in-charges. |
| 146 | M&L for Repair to sunken floor with 15 mm thick plastering in CM 1:3 of internal surface with WPC than painting with bitumen grade VG 30/ 40 over a coat of bitumen primer putting 50 micron polythene than filling with PCC 1:5:10type E-1 using 40mm graded stone aggregate and inserting 600x50 mm bore GI water pipe light grade spout incliding demolition and Removing of existing filling in sunken floor wc/ bath/ kitchen and complete all as specified and directed by Engr-in-charges. |
| 147 | Taking down carefully copper/aluminium point wiring for light, fan, bell socket power slocket etc complete with boards, outlet boxes fittings and fixtures such as switchs, sockets, lamp holders bracket,ceiling rose etc complete all as specified and directed by Engr-in-charges. |
| 148 | Taking down carefully sub-main wiring(with DB any type) of any sizeand making good to ther disturbed surfaces to match the existing complete all as specified and directed by Engr-in-charges. |
| 149 | M & L for (concealed) point wiring complete with multistranded copper conductor 1.5 Sqmm PVC insulated unsheathed single core FRLS cable 1100 volt grade, confirming IS 694 & colour code in conduit system of wiring,drawn through in and includingnon-metalicPVC concealed (including Cutting Chases and make good the distrubed surfaces ) conduit of size 20 mm or med grade as required as site, totally concealed in walls / and surface on floors / ceiling or fixed on surface of walls / columns / beam / tie beam etc by means of saddles and clips etc incl all conduit accessories / fittings / junction boxes / inspection covers etc of heavy grade, ISI marked and sunk terminal boxes of CI or 16 SWG pressed steel housing, totally concealed in walls with 3mm thick industrial laminated sheet top cover, fixed flush with wall surface by means of brass screws and sunk / cup washers, for mounting of switches, sockets fan regulators etc incl 1.5 Sqmm FRLS PVC insulated, unsheathed flexible multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end, all as specified, directed and shown on drgs for The rates of chase cutting on wall done concealed conduit and steel terminal boxes are included in the unit rates complete all as specified and directed by Engr-in-charges.(a)One light point controlled by one, one wayswitch |
| 150 | (b)One fan /Exhaust fan, point controlled byone way switch. |
| 151 | (c)One socket outlet 3 pin 6 Amps on same board |
| 152 | (d)One socket outlet 3 pin 6 Amp on independent board |
| 153 | (e)One bell point controlled byone bell push. |
| 154 | (f) One light point controlled by two,two-way switches |
| 155 | All as per item No 144 above but with 2.5 Sq mm single core multistanded copper conductor cable for 3 pin 16 Amp socket outlet on independent board. complete all as specified and directed by Engr-in-charges. |
| 156 | S&F switch piano flush type single pole one way 6 Amp ISI Marked. complete all as specified and directed by Engr-in-charges. |
| 157 | Supply and fixing switch piano flush type 5/6 amp single pole two way 230 Vcomplete all as specified and directed by Engr-in-charges. |
| 158 | S & F Bell, ding dong type AC, 230 volts, single pole complete all as specified and directed by Engr-in-charges. |
| 159 | S & F Bell push 5/6 Amps, flush type complete all as specified and directed by Engr-in-charges. |
| 160 | S&F switch piano flush type single pole one way 16 Amp ISI Marked. complete all as specified and directed by Engr-in-charges. |
| 161 | S&F socket outlet 2 in 1, 3 pin, 6 Amp flush typeISI Marked. complete all as specified and directed by Engr-in-charges. |
| 162 | S&F socket outlet 2 in 1, 6 pin, 6 and 16 amp flush typeISI Marked. complete all as specified and directed by Engr-in-charges. |
| 163 | M & L for Ceiling rose, 3 terminal/PVC/ polycarbonate, isolated body. complete all as specified and directed by Engr-in-charges. |
| 164 | M & Lfor Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fitting. complete all as specified and directed by Engr-in-charges. |
| 165 | S&F LED lamp 9 W complete all as specified and directed by the Engineer-in-Charge. |
| 166 | Supply and fix socket type electonic fan regulator flush type ISI Marked. complete all as specified and directed by Engr-in-charges. |
| 167 | Taking down and refixing / Hanging only ceiling fan (M.D. supply) and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed by Engr-in-charges. |
| 168 | Taking down and re-fixing only exhaust fan (M.D.supply) and connecting up including provision of cable from ceiling rose/connector to fan complete all as specified and directed by Engr-in-charges. |
| 169 | S&F sheet metal enclosures 240 voltwith suitable rated bus bar for double doorIP-43 DB\"s suitable for one MCB SPN as incoming and 6 MCB SP as out going SPN 8 way complete all as specified and directed by Engr-in-charge. |
| 170 | S&F sheet metal enclosures 415 voltTPN 4 way with 200 Amp rated bus bar, double door DB\"s suitable for provn fora MCB One TPN63 Amps asincoming and4 Nos of SPN 63 Amps outgoing complete all as specified and directed by Engr-in-charge. Note : MCB/RCCBTPN/SPN/SP measured and paid saperatly. |
| 171 | Supply and Fix MCBSingle pole\"C\" series5-32 Amps ISI marked. complete all as specified and directed by Engr-in-charges. |
| 172 | Supply and Fix MCBSingle pole & neutral \"C\" series 63 Amps ISI marked. complete all as specified and directed by Engr-in-charges. |
| 173 | Supply and fixing MCB TPN C Curve63 Amps complete all as specified and directed by Engr-in-charges. |
| 174 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-charges. |
| 175 | S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. complete all as specified and directed by Engr-in-charges. |
| 176 | S&F inLED light fitting 1 X 12 watt (2feet), decorative ultra slim type, with inegral driver, complete with all accessories and making necessary electric connection from ceiling rose to fitting terminal, complete all as specified and directed by Engr-in-charges. |
| 177 | Supply and fixing LED street light fitting 36 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection complete including 1.60 mtr long 40mm bore light grade GI pipe mounting bracket made to shape with and including MS clamp of F1 40 mmx6mm with bolts , nuts & washers and conductor to fitting with 3 core 1.5 sqmm pvc insulated cable complete all as specified and directed by Engr-in-charges. |
| 178 | M&Lfor sub main wiring withPVCinsulated and unsheathed 2x 6 Sq mm single core multistrandred copper conductor cable passing through inand including PVC conduit , concealing in walls (by means of chasing including making good existing surface and matching existing surface ) ISI markedand conduit accessaries fixed on surface of wall, ceiling etc, making good the distrurbed surface,incl 6 Sq mm single core copper conductor cable PVC insulated and unsheathed as earth wire. complete all as specified and directed by Engr-in-charges. Note :- Two runs of cable 6 Sqmmand One run of 6 Sqmm along with conduitshall be measured as one unit length. |
| 179 | Taking down and re-fixing only incl connecting electric meters complete all as specified and directed by Engr-in-charges. |
| 180 | S&F of Heavy duty Exhaust fan 300 mm sweep, 900 RPM, including louvers with cutting chases on brick wall and grounting with nut bolts complete all as specified and directed by Engr-in-charge. |
| 181 | S&F electric storage water heater of capacity 25 litres BEE 5 star rated including proper installing arrangment on wall surface with suitable Anchor bolt fatser andGeyser connections for hot and cold water supply made of stainless steel wire braided connrtector with chrome finish heavy duty nutsof 15mm size with suitable lengh etc complete all as specified and directed by Engr-in-charges. |
| 182 | M&L for Earthing complete with galvanised steel earth plate electrode 60 x x60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) wih top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in elevtrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion . Note : Rates are deemed to be included for necessaryearth work , earth pit with RCC cover of size300X300 x25 mm etc complete all as specified and directed by Engr-in-charges. |
| 183 | Supply, laying testing in trenches LT UG XLPE insulated,armoured, heavy duty electric cable, aluminium coductor, 1100 V grade,croos sectional area25 sqmm 4 core complete all as specified and directed by Engr-in-charges. Note : Earth work and brick work measured and paid separately |
| 184 | Excavation in trenches not more than 1.5 meter wide and in depth in Soft/loose soil complete all as specified and directed by Engr-in-charges. |
| 185 | Returning and filling of excavated loose soil in treches complete all as specified and directed by Engr-in-charges. |
| 186 | Removal of surplus loose soil from excavated place and deposting at safe side distance not more than 50 meter from excavated place complete all as specified and directed by Engr-in-charges. |
| 187 | Supply and laying Un reinforced Precast concrete cable cover, class LV, type 2, flat size 300 mm x 180 mm x 40mm complete all as specified and directed by Engr-in-charges. |
| 188 | Supply and lay sand for sand cushioning for cable protection in trenchesin SSR Part - 1 complete all as specified and directed by Engr-in-charges. Note:. for the purpose of payment punned thicknesswill be measured. |
| 189 | Supply and fix GI tubing medium grade of 40 mm dia for cable protection complete all as specified and directed by Engr-in-charges. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
