|
| 1 | Demolition of brick work / stone masonry / block masonry built in built in cement mortar or cement lime mortar complete all as specified and as directed. |
| 2 | Removing demolished building materials etc obtain from item No 1 to a distance of 1km or above, beyond the lead included in the rates, including loading, unloading and stacking at the destination remove the all debris outside of MOD landcomplete all as specified and as directed. NOTE : 1 LOAD = 1 Cum |
| 3 | Taking Down Old RCC Louvered Jalli/ Jaffery without harming the exisiting wall of Stone/ Block or Bricks masonry complete all as specified and as directed. |
| 4 | M & L precast cement concrete Type B0 1:2:4 (12.5mm graded aggregate) louvres and jallies, 40 mm thick (measured solid), in cluding all mould- ingscomplete all as specified and as directed |
| 5 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard dence soil complete all as specified and directed. |
| 6 | Removing excavated soilbeyond 500m and upto total distance 1.5 km and depositing where directed at a level of n exc 1.5 m outside MOD land complete all as specified and as directed. |
| 7 | M&L PCC (1:4:8) type D-2 as mass concrete as in foundation, mass concrete work complete all as specified & as directed. |
| 8 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed. |
| 9 | M&L for reinforced cement concrete grade M 25 design mix in Foundations, including rafts,footings,foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed. |
| 10 | M&L for reinforced cement concrete grade M 25 design mix in Columns,pillars, piers, posts and strutscomplete all as specified and as directed. |
| 11 | M&L for reinforced cement concrete grade M 25 design mix in plinth beam Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed. |
| 12 | M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation , plinth beams top beam; and similar work flat rough finish surface of concrete complete all as specified and directed. |
| 13 | M&L forFormwork to sides of pillars, posts, struts, piers,columns and stanchions flat rough finish surface of concrete complete all as specified and as directed. |
| 14 | S & F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clipscomplete all as specified and as directed |
| 15 | -Ditto- all as per tem No 14 above but 6-8mm dia stirrups |
| 16 | M&L for PVC (SWR) pipes 110mm single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 17 | Material and labour for 20mm thick granite (of any type) work ( table rubbed and polished) in steps , jambs. pillars, window cills, cooking platforms and like in cement mortar (1:4), pointing in white cement (1:2) using marble dust with admixture of pigment to match withshade of granite complete all as specified and as directed. |
| 18 | Labour only for full round moulding to 18 to 20mm thick granite slab complete all as specified and as directed. |
| 19 | M&L for wall cladding tiles 600x 300 mm x 07 to 08 mm thick as in wall cladding , set and jointed in neat cement pest & pointed in white or coloured cement to match, over and including backing coat of 10 mm th in cement mortar (1:3) including dismantling existing tiling,cement bedding (but not backing) removing rubbish off the premisescomplete all as specified and as directed. |
| 20 | M&L for mild steel framed work such as grill, gate etc with ends of bars shouldered or rebated or forged into spike framed guard bars barred iron doors, ladders, framed baluster, walk way, railing;frame work, including pintle hinges, stops, hand-made sliding bolts etc,sliding channels for sliding of gate and similar work conforming to Fe 290 Gde-E-165 complete all as specified & as directed. |
| 21 | M&L for preparation of New or previously untreated steel surface of any description over 10cm girth or width and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified & as directed. |
| 22 | M&L for Pre-cast cement concrete block masonry with solid blocks type C1, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and as directed |
| 23 | M&L for 15mm thick plastering in CM 1:4 on brick or concrete wall surfaces etc finished even and fair complete all as specified and as directed. |
| 24 | M&L for preparation of newly/old plastered surfaces and applying two coats of weather proof exterior emulsion paint (\"APEX\" brand of Asian or equivalent brand of Berger/Shalimar) over one coat of primer to wall complete all as specified and as directed by Engineer-in-charge. |
| 25 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), rubbish off the premises complete all as specified and as directed. |
| 26 | M&L 25 mmthick plain cement concrete (1:2:4), type B-O (using 12.5mm graded stone aggregate) as in sub base to receive tile/claddings tops including demolition of existing cement concrete complete all as specified and as directed. |
| 27 | Material and labour for coloured non skid ceramictiles 7 to 8 mm thick (square/rectangular), area of each tile exceeding 0.06sq.m but not exceeding 0.11sq.m as in floor etc., colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in white or coloured cement to match the colour of tiles, laid overand including 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed. |
| 28 | M&L for coloured glazed ceramictiles of size 600mm x 300mm x 7 to 8mm thick of colour and pattern including highlighter as approved by GE, as in vertical surface, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick screed bedin cement mortar 1:3complete all as specified & as directed. |
| 29 | M&L for coloured light shed virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed. |
| 30 | M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchincluding 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed. |
| 31 | Material and labour for false ceiling with made upof size 1800mm x 1200mm x 12.5mm thick, tapered edge gypsum board (Gypboard) Plain (conforming to IS 2095-Part 1:2011, Certified board) is then screw fixed to ceiling section with 25mm drywall screws {Material-Carbon steel EN-ISO 7049/50, Finish-Case hardened Grey Phosphating} at 230mm centres on ceiling section & 150mm at periphery of ceiling. Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with Gyproc Pro-Fill Jointing compound (Conforms to ASTM C475), Gyproc Joint Paper tape fixed on metal grid of hot dipped galvanized steel sections and suspended as per manufacturer\"s specifications and instructions including preparation, primer, putty, two coat oil emulsion and taking down of existing false ceilling complete all as specified and as directed. Make: Gyproc-Saint Gobain or equivalent of Armstrong, Diaken, New Age (ACE) as approved by GE. |
| 32 | Material and labour for plaster of paris decorative cornices/ moulding to the pattern as approved, cross sectional area exceeding 13 Sq.cm and not exceeding 25 Sq.cm and fixed in decorative pattern including preparation of surfaces and applying two coats of oil bound distemper over a coat of primer matching with the colour of ceilingincluding dismantling existing complete all as specified and as directed. |
| 33 | S&F aluminium powder coated three track sliding window with two glazed shutters with 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make complete all as specified and directed including taking down existing widows. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604. |
| 34 | Supply and fixvitreous china coloured wash down water closet (pedestal pattern) cascade type ‘P’ or \"S\" trap, in built seat cover and flushing cistern, low level, valveless, symphonic action type complete with inlet ball valve, float and handle complete all as specified and as directed. Make :- Hindware , catalogue No. 20028 Constellation, 21038 cistern, pastel (complete set)or equivalent from Cera/ Parryware. Note :- If Cat No. is revised, equivalent cat No. from latest catlauge shall be considered. |
| 35 | Taking up or down 15 mm bore steel tubingwith all fittings and connections including cleaning for refixing or removal to store complete all as specified and as directed. |
| 36 | Taking up or down 20 mm bore steel tubingwith all fittings and connections including cleaning for refixing or removal to store complete all as specified and as directed. |
| 37 | Supply and fix for 16 mm outer dia bore Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified. complete all as specified and as directed. |
| 38 | Supply and fix for 20 outer mm bore Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified. complete all as specified and as directed. |
| 39 | S and F in repair 75 mm bore PVC (SWR) floor trap plain with SS Square grating incl jointing with solvent cement |
| 40 | S&F chromium plated bib cock with wall flange quarter turn complete all as specified and as directed. Cat No. FUS-29037 of make Jaquar ‘Fusion \" series or of equivalent make as per Appx \"A\" as approved by GE. |
| 41 | S&F 15mm diadecorative Pillar taps, cast copper alloy, withcapstan heads, chromium plated,screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. |
| 42 | S&F 5mm thick plain bevelled edge looking mirror of selected quality glass, mounted on brass CP brackets with CP brass screws and cup washers complete all as specified and as directed. |
| 43 | S&F brass chromium plated quarter turn two way bib cock with wall flange 15mm dia Cat No. FUS-29041 of make Jaquar ‘FUSION series or equivalent as per Appx \"A\" as approved by GE complete all as specified and as directed. |
| 44 | Supply and fix, chromium plated angle cock 15mm dia quarter turn as per Cat No.FUS-29001 of make Jaquar ‘FUSION \" series or equivalent of make as per Appx \"A\" as approved by GE complete all as specified and as directed. |
| 45 | S&F chromium plated single towel rail 600mm longincluding built in side brackets ,Cat No. AKP-35711 of make Jaquar ‘KUBIX PRIME\" Series or other equivalent series of Jaquar or equivalentof makes as per Appx \"A\" as approved by GE complete all as specified and as directed. |
| 46 | S&F chromium plated toilet paper holder ,Cat No. AKP-35751 of make Jaquar ‘‘KUBIX PRIME\"Series or other equivalent series of Jaquar or equivalentof makes as per Appx \"A\" as approved by GE complete all as specified and as directed. |
| 47 | S&F chromium plated soap dish ,Cat No. AKP-35731P of make Jaquar ‘KUBIX PRIME\"S Series or other equivalent series of Jaquar or equivalentof makes as per Appx \"A\" as approved by GE complete all as specified and as directed. |
| 48 | S&Fchromium plated towel rack, 600mm long with lower hangers, Cat No. ACN-1181FHN of make Jaquar ‘CONTINENTAL\"S Series or other equivalent series of Jaquar or equivalentof makes as per Appx \"A\" as approved by GE complete all as specified and as directed. |
| 49 | Supply and fix for vitreous chinaware wash hand basin full Pastel, white, flat back, size 46x46x15Cm, table top type with fixing accessories set, CP brass waste coupling, chain and plug and porcelain stopper, waste fittings, union and waste pipe 32 mm dia of required length, 15mm dia PVC connection 450mm long including PTMT nuts and all necessary inlet outlet connections(excluding tap) complete all as specified and as directed.Make: HindwareCAT Part No. 91064, or equivalent of makes as per Appx \"A\" as approved by GE |
| 50 | Material and labour for 18 to 20mm thick granite (of any type) work ( table rubbed and polished) in steps , jambs. pillars, window cills, cooking platforms and any other platform like in cement mortar (1:4) over and including 10mm thick backing coat in cement mortar (1:3), pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cutting, edge moulding, full curving the edges complete all as specified and as directed. |
| 51 | M&L for Machine cut cudappah stone slab 20 to 25mm thick set in CM (1:4) as in base of stone slab platforms and in similar work complete all as specified and as directed. |
| 52 | S&F stainless steel health faucet witrh 1 Mtr tube and hook complete all as specified and directed ny Engr-in-charge. Confirming to Cat part No ALD573 of jaguar completed all as specified |
| 53 | S&Fchrome plated towel ring square with round flange, Cat No. CAN-1121N of make Jaquar ‘CONTINENTAL\"S COLLECTION\" Series or equivalent as approved by GE all as specified and as directed. |
| 54 | S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall fixedcomplete all as specified and as directed |
| 55 | S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall complete all as specified and as directed |
| 56 | S&F PVC (SWR) bends, 75 mm bore, any radius with access door complete all as specified and as directed. |
| 57 | S&F PVC (SWR) bends, 110 mm bore, any radius with access door complete all as specified and as directed. |
| 58 | S&F PVC (SWR) Junction, single, (single T) equal or unequal, 110 mm bore,with access doorcomplete all as specified and as directed. |
| 59 | S/F in repair 75 mm bore PVC (SWR) floor trap plain with grating incl jointing with solvent cement complete all as specified and as directed. |
| 60 | Taking down cement plaster on brick/ stone walling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 61 | M&L Brick work with fly ash old size bricks,straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 etc complete all as specified and as directed. |
| 62 | M/L for 15mm thick cement plaster in CM 1:6 on brick or concrete surfaces finished even and smooth complete all as specified and as directed. |
| 63 | Material and labour for preparation of New plastered surfaces of wall and applying two coats of Oil emulsion distemper over a coat of alkali resistant primer complete all as specified and as directed. |
| 64 | Supply and fix for 30mm thick flush shutterssolid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 35X6mm all around the shutters including glass opening having size 100mm x 100mm complete all as specified and as directed |
| 65 | S&F300mm long brass sliding door bolts with sand or die cast brass hasp, staple (bolt type) and fixing bolt with roller or drawn brass bolts, ISI marked,complete all as specified and as directed. |
| 66 | S&F for brass mortice lock, vertical type, size 100mm of 4 levers with duplicate key complete all as specified and as directed. |
| 67 | S&F for 200mm long brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as direcetd |
| 68 | Supply and fix for butt hinges, 100mm size, extruded brass with mild steel hinge pins, bright polished and fixed type B-11 complete all as specified and as directed. |
| 69 | Supply and fix for 150mm size brass handles, extruded, fabricated type, polished complete all as specified and as directed. |
| 70 | S&F aluminium die cast body Door closer hydraulically regulated designation No 2, universal type suitable for door shutter of 701 to 850 mm in width and of weight between 36 to 60kgISI Marked complete all as specified and as directed. |
| 71 | S&F in repairs wall mixer brass chromium plated quarter turn with provision for over head shower with 115 mm long bend pipe on upper side connecting legs and wall Flangessuitable for fixing with GI pipes 15mm dia complete all as specified and as directed.Make :Cera/Prayag Cat Pt No 7875-N or equivalent |
| 72 | Material and labour for point wiring using approved colour coding as per IS ,with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade ISI-694 marked drawn through in and including heavy duty PVC concealed conduit including all accessories, Metal flush box of suitable module, with earth dolly, covered with twin colour (specified by Engr-in- Charge)modular white cover plate & frame after chasing in stone masonry walls etc for accomodating modular switches, sockets, regulators etc including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly, providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed for the following |
| 73 | One light / wall / exhaust fan pointcontrolled by one, one way switch 6 Amps complete all as specified and as directed |
| 74 | One light pointcontrolled by one, two way switch 6 Amps complete all as specified and as directed |
| 75 | One5 pin socket outlet plug point, 6 Amps, controlledby one, switchon same board complete all as specified and as directed |
| 76 | One5 pin socket outlet plug point, 6 Amps, controlledby one, switchon independent board complete all as specified and as directed |
| 77 | Description all as per 72 here-in before but using 2.5 Sqmm single core copper conductor FRLS cable of multistranded PVC insulated unsheathed 1100 Volts grade for one 6 pin socket outlet plug point,16 Amps independentincluding necessary running of 2.5 Sqmm PVC insulatedmultistranded copper conductor single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dollyproviding Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixturesall as specified and as directed |
| 78 | Supply and fixingModular Switch - 6 Amps, Single pole one way, one module complete all as specified andas directed. |
| 79 | Supply and fixingModular Switch - 16 Amps, Single pole one way, one module complete all as specified andas directed. |
| 80 | S & FModular socket outlet multipurpose 6 Amps, 5 pin, 2 module, complete all as specified andas directed. |
| 81 | S & FModular socket outlet multipurpose 16 Amps, 6 pin-shuttered type, 2 module, complete all as specified andas directed. |
| 82 | S & F Ceiling rose, 3 phase / PVC / polycarbonate,complete all as specified andas directed |
| 83 | Supply and fixing20/22 WattInverter LED Battenaluminium body with Opal Diffuser, IP20, Battery back-up & Functioning as per Product TDS with intregrated electronic driver, connector block, holder, decorative end caps, LED tube light etc complete with all accessories prewired and mounting PVC rectangular block, including provision of flexible copper conductor cable of suitable size from ceiling rose to connector and taking down old unserviceable fitting from existing postion for carrying to store, making good disturbed surfaces complete all as specified and as directed.Make Halonix Cat No LED INVERTER BATTEN HLB-08-22-CW-INV or equivalent in Havells, LHEXACP7FNIW020 |
| 84 | Supply and fixingLED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lampconnecting up with three core flexible copper conductor cable of suitable size from ceiling rose to connector, making good disturbed surfaces complete all as specified and as directed.Make Jaquar cat No -LGLZ01X010XW , Orient Cat No- LBLN-10-C-SQ |
| 85 | Supply and in repairs LED down light recess mounted luminaire, multistranded round type 15 watts with efficiencyof 100 lumens per watt, sleek designaluminium housing polycarbonate diffuser white finish operating voltage 150 V-270VoltsAc, 50 Hz all, jaas per Make Philips CAt Part No DN172B-LED9S-6500 PSU, jaquar nero plus LNRP01R012XN or HAvells completed all as directed by E-in-C. |
| 86 | S & F for plastic body exhaust fan, AC single phase, 240 V of size 250 mm sweep with louvers (as per Cat Part No -698502of Make Indo Asian or equivalent Make-Bajaj Maxima DX/ Usha Crispair )including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan complete all as specified and as directed |
| 87 | Taking down carefully existing unserviceable main switch /cutout /DBs of any type, capacity and description and removing materials from site and making good disturbed surfaces of walls, floors as per the existing finishes complete all as specified and as directed. |
| 88 | S & F sheet metal enclosure MCB DB SPN 8 waywith 63 Amps rated bus bar 240 Volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of disturbed surface to match the existing colour of wall complete all as specified and as directed |
| 89 | Supply and fixing amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB)SP 5 To 32 AMPand current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed. |
| 90 | Supply and fixing amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB)SPN32 AMPand current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed. |
| 91 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. |
| 92 | Taking down of old unserviceable sub main wiring of any type complete all as specified and as directed. |
| 93 | S & F submain wiring with 2 single core (FRLS) PVC insulated unsheathed multistranded flexible copper conductor cable, of 4.0 Sqmm and one single core 4.0 Sqmm flame retardent low smoke (FRLS) PVC insulated, unsheathed, multistranded, flexible copper cable as earthing lead , all as per IS 694/1990 drawn through including concealedin stone masonary PVC conduit and conduit accessories heavy duty ISI marked,providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixturesall as specified and as directedall as specified and as directedcomplete all as specified andas directed.Note :- ( Two runs of main copper wire, one run of earth wire cable & PVC conduit shall be measured together as one length). |
| 94 | Taking Down existing and Supply and fix electric water heater,storage type Inner container material Steel with Glass and having 2 Nos Heating element type of Incoloy with Glass coated heating element upto2 KW capacity 25 litre, 230 Volts 50 Hz , temp range 35 to 75 C, with 7 Years on Tank,4 Years on Heating Element and 2 Years on Other Parts, with Outer body material of ABS, PUF insulation,lined BEE 5 Star, with product dimension of 470x470x371mmrated vertical typecomplete with all accessoriessuch as safety valve, thermostate,NRV, connection piece etc all as specified and directed by Engr-in-Charge. (Make ERICA DIGITAL : VOLUME 25 LTR of Jaquar or equivalent in Havells/Bajaj/Recold/Haier/Orient/Hindware) |
| 95 | Supply and fixing of geyser Bolt120mm Long with nut & washers, complete all as specified and as directed |
| 96 | Supply and installation of high-quality, durable material suitable for hot water applications 2 feet PVC connection for geyser, including all necessary fittings such as appropriate joints, couplings, or elbows as required for the installation, connections, and accessories including complete installation, testing, and making good of the site directed by Engineer-in- Charge complete all as specified and as directed |
| 97 | Supply and fixSheet metal Enclosure with socket plug top and MCBs Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps, 240 Volts 50 Hz all as specifiedEngineer-in- Charge complete all as specified and as directed |
| 98 | Supply, installation, testingand commissioningof ceiling mount auto light occupancy, dual technologysensor, adjustable of delay timer, infra red and ultrasonic detection, dia 8meter IP 20, 3 wire with neutral optimum distanbc between 2 sensors should be 6 mtr, standby consumption 0.8W fixed directly to a false ceiling with mounting claws (included) or installed in a battibox depth 50 mm all as specified and directed (Note All necessary FRLSH copper wires to connect complete light of office etc are deemed to be included in the rates quoted above for motion sensors: Make Legrand CAT No 048806, SWG 12582DB12 of Siemens, MTN630919 of Schneider) |
| 99 | Supply and fixingModular Switch - 6 Amps, Single pole two way, one module complete all as specified andas directed. |
| 100 | Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site. |
