|
| 1 | Dismantling of boarding in wall/ceiling, any description, fixed in any position with nails or screws complete all as specified and directed by Engr-in-Charge.(Note: Taking down carefully old FTL fitting recessed mounted light fittings/ceiling complete with all accessories and making necessary electric connection, complete all as spd & directed by Engr-in charge. |
| 2 | M&L for 9mm thick pre-laminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws/nails to timber frame work in wall/ceiling portion all as specified and directed by Engr-in-Charge. |
| 3 | M&L for 6mm thick veneered decorative plywood grade 1 (with BWR resin) with decorative face veneered one side fixed with nails to timber frame on wall/ceiling complete all as specified and directed by Engr in Charge |
| 4 | S&F M&L for readymade soft wood wall /Ceiling panelling in strips of 100 mm width 10mm thickness having lounge and groove fixing arrangements fixed to wooden frame work(Size of frame work 1.2X1.2 C/C included )as per manufacturers instruction including polishing completeall as specified and as directed by Engr-in- Charge .Note : if necassary size of the frame work/ wall paneling will be changed as per site requirement without any cost different complete all as specified and directed by Engr-in-Charge. |
| 5 | S&F grid false ceiling GI system powder coated prelude (main runner section 32x24x0.30x3600mm, cross tee 25x24x0.30x1200mm, wall angle 24x24x0.40x3000mm and including providing and fixing PVC pre-laminated in frontside and aluminium foil backed gypsum tile board of size 595 x 595 x 8-9mm fixed in ceiling frame work with necessary fastening GI wire and cleats complete all as specified and directed by Engr-in-Charge. |
| 6 | Dismantling of timber scantling in fillets, posts, rafters, purlins etc under 40Sq. Cm in section complete in framed work.complete all as specified and directed by Engr-in-Charge. |
| 7 | M&L for 2nd class hard wood timber scantling plain fillets square, rectangular in section area exc 13 Sqcm and not exc 25sqcm secured with nails complete all as specified and directed by Engr-in-Charge. |
| 8 | M&L for 2nd class soft wood fillets sectional area exc 3 and n exc 6 sqcm rectangular or triangular in section but bullnosed, splayed, chamfered or rounded on one edge of face, secured with nails or brads, complete all as specified and as directed by Engr-in-Charge. |
| 9 | M&L for preparation of new or previously untreated wooden surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primercomplete all as specified and directed by Engr-in-Charge. |
| 10 | Taking down of chowkats with shutter (without taking of shutter from frame)n exc 1.5 Sqm each complete all as specified and directed by Engr-in-Charge. |
| 11 | Taking down of chowkats with shutter (without taking of shutter from frame)exc 1.5 Sqm but n,exc 4.0 Sqm each complete all as specified and directed by Engr-in-Charge. |
| 12 | Resecuring or easing & adjusting of door shutter of any description without taking downexc 1 Sqm but not exc 2 Sqm , completed all as specified and directed by Engr-in-Charge. |
| 13 | S&F of 2nd class hard wood, Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed by Engr-in-Charge. |
| 14 | S&F plain 2nd class hardwood 35mm thick framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 15 | S&F of 30mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, fitted to chowkats complete all as specified and directed by Engr-in-Charge. |
| 16 | S&F for 30mm thick 2nd class hard wood glazed and skelton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) complete all as specified and directed by Engr-in-Charge. |
| 17 | S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes, as per specifications and drawing complete or as directed by Engineer-In-Charge. |
| 18 | S&F factory made solid PVC door shutter 30mm thick (stiles), consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC strip of 20mm width stuck in insde with solvent cement for stiles and plain colour PVC sheets for top rail; lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and directed. |
| 19 | S&F of 100mm size, butt hinges, cold rolled steelwith screw, medium weight , ISI marked complete all as specified and directed by Engr-in-Charge. |
| 20 | S&F in repair of 100mm size, butt hinges, cold rolled steelwith screw, medium weight , ISI marked complete all as specified and directed by Engr-in-Charge. |
| 21 | S&F of 75mm size, butt hinges, cold rolled steel with screw, medium weight , ISI marked complete all as specified and directed by Engr-in-Charge. |
| 22 | S&F 150mm long Aluminium, anodised, barrel tower bolt, fixed with screws complete all as specified and directed by Engr-in-Charge. |
| 23 | S&F in repair 150mm long Aluminium, anodised, barrel tower bolt, fixed with screws complete all as specified and directed by Engr-in-Charge. |
| 24 | S&F 150mm size, extruded aluminium alloy handles fabricated type anodised complete all as specified and directed by Engr-in-Charge. |
| 25 | S&F in repair 150mm size, extruded aluminium alloy handles fabricated type anodised complete all as specified and directed by Engr-in-Charge. |
| 26 | S&F of 250mm long, aluminium alloy, anodised,sliding door bolts, with hasp staple ( bolt type)and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy complete all as specified and directed by Engr-in-Charge. |
| 27 | S&F in repair of 250mm long, aluminium alloy, anodised,sliding door bolts, with hasp staple ( bolt type)and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy complete all as specified and directed by Engr-in-Charge. |
| 28 | S&Fin repair aluminium anodised windows with side hung shutters / sliding shutters and frame made with aluminium section with and including glass/particle board 12mm thick (as specified below)Aluminium sections shall be of size as given below:- Frame : 44.5x44.5x1.60mm thickTop/bottom rail; 90x44.5mmx1.60mm thickside style/rails of shutter-44.5x44.5mmx1.60mm thickGlass : 5mm thick plain glasswith rubber gasket with aluminium beading . Aluminium fitting such as peg stay, aluminium hinges, aluminium handle 100mm long, aluminium tower bolt 100mm long and making good of wall surface with matching to existing surface, complete all as specified and as directed by Engr-in-Charge. |
| 29 | S&F in repair aluminium anodised glazed door complete with shutter size of style top rail and lock rail 83x45x1.60mm thick and bottom rail 114x44x1.60mm thick and door frame size 63x38x1.60 mm including aluminium mongry fitting, hinges, tower bolt, handle, lock etc all necessary fittings and glazing with 5mm thick tinted glass/12mm thick pre laminated particle board complete including rubber lining at sides for air locking with complete all as speicified and as directed by Engr in Charge. |
| 30 | S&F in repairaluminium anodised glazed Aluminum partitioncomplete with shutter size of style top rail and lock rail 83x45x1.60mm thick and bottom rail 114x44x1.60mm thick and partitionframe size 63x38x1.60 mm including aluminium mongry fitting, hinges, tower bolt, handle, lock etc all necessary fittings and glazing with 5mm thick tinted glass/12mm thick pre laminated particle board complete including rubber lining at sides for air locking with complete all as speicified and as directed by Engr in Charge. |
| 31 | S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engr-in-Charge. |
| 32 | S&F in repair Mortice brass lock of 4 lever, vertical type, size 100 mm , complete all as specified and directed by Engr-in-Charge. |
| 33 | S&F in repair of aluminum body door closer (extruded section) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed by Engr-in-Charge. |
| 34 | S&F in repair of Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, Overall length of cover plate 140mm complete all as specified and directed by Engr-in-Charge. |
| 35 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed by Engr-in-Charge. |
| 36 | Hacking out old broken glass (any thickness, size, quality or description) from from metal frame including punching or drilling out old glazing pins/spring clips and providing, complete all as specified and directed by Engr-in-Charge. |
| 37 | S&F of 4mm thick sheet glass, ordinary quality and glazing with oil putty and glazing pins in square n exc 0.5 sq. m in each pane complete all as specified and directed by Engr-in-Charge. |
| 38 | S&F of 4mm thick figured glass, pin head type and glazing with oil putty and glazing pins in square n exc 0.5 sq. m in each pane complete all as specified and directed by Engr-in-Charge. |
| 39 | Supply and fixedin repair window blinds are adjustable window coverings made of slats (Louvers)or a single piece of materials , used to control lights ensure privacy , and add décor,featuring horizontal or vertical styles that can lift, rise or stack open/ closed, typically from materialslike venyl, fabric sheets any colour fixed in windows, door or openings.Note :- Rates are includes of all necessary fittings and fixtures. |
| 40 | S&F in repair Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with galvanised wire staples, complete all as specified and directed by Engr-in-Charge. |
| 41 | S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with galvanised wire staples, complete all as specified and directed by Engr-in-Charge. |
| 42 | S&F in repair 25mm dia aluminium anodised alloy curtain rod including wooden ornamental/ decorative bracket and end cap complete all as specified and directed by Engr-in-Charge. |
| 43 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering or wall etc complete all as specified and directed by Engr-in-Charge. |
| 44 | S&F Galvanised corrugated mild steel sheeting 0.50mm thick with two corrugation side lap, fixed with coach screws and washersas in roofs, walls etc complete all as directed by Engr-in-Charge. |
| 45 | M & L for two coat of synthetic enamel paint of approved tint on steel and iron surfaces of any description over 10 cm width or girth not otherwise described including preparing new zinc(or galvanised) surfaces to receive painting by coating with mordant solution incl washing and cleaning, etc. over a coat of red oxide complete all as specified and directed. |
| 46 | Demolition of stone/PCC block/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed by Engr-in-Charge. |
| 47 | M&L for Pre-cast cement concrete block masonry Type C-1 (1:3:6) 20 mm graded aggregate with solid blocks, exc. 10 cm in width and setting in mortar 1:6 complete all as specified and directed by Engr-in-Charge. |
| 48 | Taking down cement plaster on brick or stone walls etc.including racking out joints,hacking for key scrubing down with water&receive plaster upto double story height complete all as specified and directed by Engr-in-Charge. |
| 49 | Rendering 15mm thick in CM 1:4 using water proofing compound as per manufacturer\"s instruction in two layers, finished even and smooth surface without using extra cementcomplete all as specified and directed by Engr-in-Charge. |
| 50 | Rendering 10mm thick in CM 1:6 using water proofing compound as per manufacturer\"s instruction in two layers, finished even and smooth surface without using extra cementcomplete all as specified and directed by Engr-in-Charge. |
| 51 | M&L for preparing new surfaces including priming plastered and other surfaces with alkali resistant priming paint and applying two coat of cement base paint complete all as specified and directed by Engr-in-Charge. |
| 52 | M&L for preparation of new plastered surface on wall of any description and applyingtwo coats distemper oil emulsion over a coat of primer complete all as specified and directed by Engr-in-Charge. |
| 53 | S&F in repair for SDC Laminated flooring 8mm thick of any coloured, manufactured by Direct Pressure Laminated (DPL) wherein the empty Abrasive aluminium oxide overlay alongwith metamine impregnated decorated film is directly fused with the back with flooring locking profile in designed with double click locking system on the length and single locking width alongwith desire locking strength laid over 1mm thick foam base, complete including removal of existing flooring, all as directed by the Engr-in-Charge. |
| 54 | M&L forpreparation old surfaces of plastered or unplasteredold decorated surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white/lime wash on walls including cornices, pilasters etc complete all as specified and directed by Engr-in-Charge. |
| 55 | Ditto all as per item No.51 here in above but on ceiling surfaces. |
| 56 | M&L forpreparation old surfaces of plastered or unplasteredold decorated surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil bound distemper on walls including cornices, pilasters etc complete all as specified and directed by Engr-in-Charge. |
| 57 | Ditto all as per item No. 53 here in beforebut on ceiling surfaces. |
| 58 | M&L forpreparation old surfaces of plastered or unplasteredold decorated surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats of oil bound distemper on walls including cornices, pilasters etc ccomplete all as specified and directed by Engr-in-Charge. |
| 59 | Ditto all as per item No. 5 here in above but on ceiling surfaces. |
| 60 | M&L for preparation of old painted surfaces of wood or wood based material and applying one coat of synthetic enamel paint on surface of any description over 10cm width or girth complete all as specified and directed by Engr-in-Charge. |
| 61 | M&L for preparation of old painted steel surfaces and applying one coat of synthetic enamel paint on surface of any description over 10cm width or girth complete all as specified and directed by Engr-in-Charge. |
| 62 | M&LforFrench polishing on old surfaces of any description exc 10cm width or girth in one or more coats including preparation of old wooden surfaces including of wood filler on works with complete all as specified and directed by Engr-in-Charge. |
| 63 | M&L forpreparing old surfaces of plastered or unplastered surfaces including washing rubbing down and scrapping smoke soot moulds, moss and greasing sports with steel wire brush and applying one coat of cement base paint complete all as specified and directed by Engr-in-Charge. (Note : Ladders, scaffolding will be provided by Contractor where required) |
| 64 | Complete removal of existing surfaces including washing rubbing down and scrapping for applying Two or more coats of 100% Premium acrylic emulsion paint on wall having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. including Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed by Engr-in -Charge. |
| 65 | Dismantling floor, hearth or wall tiling including cement mortarbedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge. |
| 66 | M&L for Coloured Non Skid Ceramic joint free tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in whiteor coloured cement to matchincluding screed bed 15mm thick in CM 1:6all as specified and directed by Engr-in-Charge. |
| 67 | M&L for Coloured Glazed ceramic tiles in vertical surfaces of size 450mm x 300mmx 7mm thick over and including 10mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed by Engr-in-Charge. |
| 68 | M&L for Coloured Vitrified Ceramic tiles 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:6all as specified and directed by Engr-in-Charge. |
| 69 | Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing complete all as specified and directed by Engr-in-Charge. |
| 70 | Taking upor down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing complete all as specified and directed by Engr-in-Charge. |
| 71 | Refixing of old steel tubing and connections in new or old position with all fittings to floor, wall or ceiling for 15mm bore GI tubingcomplete all as specified and directed by Engr-in-Charge. |
| 72 | Refixing of old steel tubing and connections in new or old position with all fittings to floor, wall or ceiling for 20mm bore GI tubing complete all as specified and directed by Engr-in-Charge. |
| 73 | S&F 15mm medium grade galvanised GI steel tubing with all fittings fixed to wall or laid in floors complete all as specified and directed by Engr-in-Charge. |
| 74 | S&F 20mm medium grade galvanised GI steel tubing with all fittings fixed to wall or laid in floors complete all as specified and directed by Engr-in-Charge. |
| 75 | S&F in repair 20 mm 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed by Engr-in-Charge. |
| 76 | All as per Item No 72above here-in-before but 25mm, complete all as specified and directed by Engr-in-Charge. |
| 77 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11CPVC pipes as per IS:15778 are produced in two different Standard Dimensional ratios SDR 11 & SDR 13.5. Pressure bearing capacity of SDR 11pipes @23°C is 28.12kg/cm² & at @82°C 7.03kg/cm² and SDR 13.5 @23°C is 22.5kg/cm² & at @82°C 5.60 kg/cm².CPVC fittings up to 50 mm are all SDR 11.CPVC fittings and pipe cutting fixing with CPVC solvent.outer dia 20mm fittings on walls/ceiling or laying in floorscomplete all as specified and directed by Engr-in-Charge. |
| 78 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11CPVC pipes as per IS:15778 are produced in two different Standard Dimensional ratios SDR 11 & SDR 13.5. Pressure bearing capacity of SDR 11pipes @23°C is 28.12kg/cm² & at @82°C 7.03kg/cm² and SDR 13.5 @23°C is 22.5kg/cm² & at @82°C 5.60 kg/cm².CPVC fittings up to 50 mm are all SDR 11.CPVC fittings and pipe cutting fixing with CPVC solvent.outer dia 25mm fittings on walls/ceiling or laying in floorscomplete all as specified and directed by Engr-in-Charge. |
| 79 | S&F in repair of 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engr-in-Charge. |
| 80 | S&F in repair 20mm PP-R Gate valves (brass insert) as per requirement of the site complete all as specified and directed by Engr-in-Charge. |
| 81 | S&F 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including taking down unserviceablecistern complete all as specified and directed by Engr-in-Charge. |
| 82 | S&F in repairs vitreous china water closet (Squatt Pan) Orrisa pattern 580x440 mm size pan white withfront or back inlet with integral \"foot rests including provn of lime concrete bedding including connections to \"flushing cistern/pipe\" complete all as specified and directed including 100mm CI/PVC \"P\" trap.complete all as specified and directed by Engr-in-Charge. |
| 83 | S&F in repair vitreous China wash down (EWC) water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) including seat cover for pedestal pattern complete all as specified and directed by Engr-in-Charge. (Make : Jaquar/Cera) |
| 84 | S&F in repair vitreous china wash hand basin including brackets, white size 550 x 400 mm incl cutting cutting for and pinning in ends of brackets. Including Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and directed by Engr-in-Charge. |
| 85 | S&F in repair One piece European WC viterus china with S/P trap & slow motion seat cover as per Cera part no. S1014124 or equivalent approved in CENC of Jaguar/Hindware etc complete all as specified and directed by Engr-in-Charge. |
| 86 | M&L in repairVitreous China Urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe) with grating, union for discharge pipe, flush pipe, waste pipe and brackets including fixing etc complete all as specified and directed by Engr-in-Charge. |
| 87 | S&F in repair15mm bore Bib tapbrass chromium plated fancy type with capstan head screwed down, screwed for iron pipe fixed complete all as specified and directed by Engr-in-Charge. (Make : Jaquar/Kokler/Parryware) |
| 88 | S&F in repair15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, fancy type with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge. |
| 89 | S&F in repair 15mm Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixedcomplete all as specified and directed by Engr-in-Charge. (Make : Jaquar/Kokler/Parryware) |
| 90 | Supply and fix in repair 32 mm dia bore waste fittings brass chromium plated fixed to wash hand basin,sinks with long screwed shanks and fly nuts flange and bedded in run lead cement and other end fixed complete all as specified and directed by Engr-in-Charge. |
| 91 | S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified and directed by Engr-in-Charge. |
| 92 | S&Fin repair PVC connections 15mm size with PTMT nuts of length 600mm, complete all as specified and directed by Engr-in-Charge. |
| 93 | S&F in repair of corrugated flexible PVC waste pipe of 32mm dia, 800mm long complete all as specified and directed by Engr-in-Charge. |
| 94 | S&Fin repair CP Stop valve fancy type, cast copper alloy, with capstan heads, screwed down both ends for high pressure, as per ISI suitable for 15mm dia iron pipecomplete all as specified and directed by Engr-in-Charge. |
| 95 | S&F in repairs600mmX450mm bevelled edge mirror 5 mm thickof selected quality glass, mounted on 6mm thick AC building board or comercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washer and taking down old mirror complete all as specified and directed by Engr-in-Charge. |
| 96 | S&F in repairs 20mm dia brass chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified and directed by Engr-in-Charge. |
| 97 | S&F in repair of 15mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms/20mm-125gms) complete all as specified and directed by Engr-in-Charge. |
| 98 | S&F in repairs brass chromium plated health faucet with 1.5 Mtr flexible Chromium pipe screw down suitable for 15mm bore pipe/fitting with angle cock with CP brass check nut and holder as per Parryware Cat no . T-9929 W1 or equivalent of jagure /Parco/Hindware complete all as specified and directed by Engr-in-Charge. |
| 99 | S&F in repair of 500 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed by Engr-in-Charge. |
| 100 | S&F in repair of 1000 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed by Engr-in-Charge. |
| 101 | S&F in repairPuff tank of 500 Ltrs capacity, insulated cylinderical vertical type double layer duly filled with glass wool with closed top hoisted and to resist in temperature between -30 degree to +35 degree celciusfixed in position with all fittings complete all as specified. |
| 102 | S&F in repair Puff tank of 1000 Ltrs capacity, insulated cylinderical vertical type double layer duly filled with glass wool with closed top hoisted and to resist in temperature between -30 degree to +35 degree celciusfixed in position with all fittings complete all as specified. |
| 103 | S&F in repair of Ball valves for 20mm bore dia high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 mm - 210 gms/25mm-455gms/ 40mm- 690 gms) complete all as specified and directed by Engr-in-Charge. |
| 104 | S&F in repairs Sinks with drainage board made of stainless steel 1mm thick kitchen or laboratorywith plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engr-in-Charge. |
| 105 | Demolition Stone slabs and tiles Laid beded and pointed cement mortar of any description or thickness in floors, aprons etc. all as specified and directed by Engr-in Charge. |
| 106 | M&L Granite 25 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of graniteandProviding edge moulding to 18-20mm thick granite stone of counters vanitiesetc. including machine polishing to edge to give high gloss finish etc. complete all as specified and directed by Engr-in-Charge. |
| 107 | M&L Providing edge moulding to 18-20mm thick granite stone of counters vanitiesetc. including machine polishing to edge to give high gloss finish etc. complete all as specified and directed by Engr-in-Charge. |
| 108 | S&F in repair Sheet glass shelf assembly/Glass Corner assembly set of three consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed by Engr-in-Charge. |
| 109 | S&F in repairs for Vitreous China bowl type urinals, size of 465x355x265mm white(minimum) with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (excluding of fixing supply pipe, flushing cistern, flush pipe, trap and waste pipe) complete all as specified and directed. |
| 110 | Demolition of cement concrete (unreinforced) in any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 111 | M&L for 40 mm thickCement concrete type B-1, 1:2:4 (20mm graded crushed stone aggregate) as in floor finish, finishing cement concrete surface even and smooth with using extra cement complete all as specified and directed. |
