Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 24-03-2026 | CorrigendumNo.01 | Date | 08-04-2026 |
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed by Engr-in-charges. |
| 2 | M&L for7 to 8mm thick Non skid joint free coloured ceramic tiles in floor, area of each tiles exc 0.11 Sqm but n.exc 0.18 Sqm laid over 15mm thick screed bedding layer in CM 1:4, set and jointed in neat cement slurry and pointed with white or coloured cement to match. complete all as specified and directed by Engr-in-charges. |
| 3 | M&L coloured glazed ceramic tilesin vertical surface of size 600x300x7-8mm thick laid over 10mm thick rendering coat in CM 1:3, set and jointed in neat cement and pointed in white or coloured cement to match.The dado shall be flush with plaster & all edges properly mitered. complete all as specified and directed by Engr-in-charges. |
| 4 | M&L for non skid Colour Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and inted in white or coloured cement to match over and including 15mm thick screed bed incement mortar 1:6 complete all as specified and directed by Engr-in-charges. |
| 5 | All as per above but in skirting to walls including 10mm thick cement plaster in cement mortar 1:4 as backing coat on fair faces on stone surface complete all as specified and directed by Engr-in-charges. |
| 6 | M&L machine cut Udaipur Green marble stone slab 18-20 mm thick mirror polished laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over 15 mm thick cement screed bed in CM 1:4 in steps, cills etc including rounding of edges at nosing. complete all as specified and directed by Engr-in-charges. |
| 7 | M&L 18 to 20 mm thick Black granite stone in single piece in cooking plateform complete laid over 15mm thickrendering layer in CM 1:4 and jointed with white cement with admixture of pigment to match shade of granite stone including grinding and polishing complete and providing necessary holes for gas pipe / water supply pipe etc. complete all as specified and directed by Engr-in-charges. |
| 8 | S&F in repairs Vitreous China wash basin, white flat back, size 550x400mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets and vitreous china pedestal complete all as specified and directed by Engr-in-charges. |
| 9 | S&F in repairs vitreous china clay water closet squatting pan ORISSA Pattern size 580x 440 mm white with integral foot rest incl \"P\" or \"S\" traps, flush pipe of 32mm dia HDPE pipe etc complete all as specified and directed by Engr-in-charges. |
| 10 | S&F in repair Polymer coloured (Polypropeylene Delrin and ABS) low levelflushing cistern 10 Ltr capacity, valveless syphonic action type complete with inlet ball valve float valve bends brackets, rawl plug, brass screws handle etc complete having BIS derscriptionmark with 2731 with andincluding suitable size of MS brackets, plug, screws all as required incl taking down existinghigh level/low level flushing cistern any type disconnecting pipes and jointingwith new one etcand making good the floors/walls as per existing floor finish/wall finish including 32 mm bore PVC flush pipe and jointing with Water closet of any type complete all as specified and directed by Engr-in-charges. |
| 11 | S&F in repairs stainless steel sink without drainage board, made out of 1.00mm thick sheet for kitchen oe laboratory with plug,washers, waste pipe, cast irn cantilever bracketof overall sizesize 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engr-in-charges. |
| 12 | S&F in repair stainless steel plate rack made out of 1.00mm thick sheet900x 900x 200mm complete all as specified and directed by Engr-in-charges. |
| 13 | S&F 50mm bore LDPE (Low density Polyethylene Pipes) of pressure rating 6Kgf/Sqcm fixed complete to walls,ceilings or in floorsincluding taking down of old GI tubing, 40 mm bore complete all as specified and directed by Engr-in-charges. |
| 14 | S & F in repairs 15mm bore Brass CP mixer (Single lever) for WHB for mixing hot & cold water screwed down for iron/CPVC pipe and fixedwith Connecting Legs & Wall Flanges, complete all as specified and directed by Engr-in-charges. |
| 15 | S&F in repair bib tap screwed down high pressure, cast copper alloy,fancy type, ISI marked, with crutch or butterfly handles screwed down suitable for 15mm bore pipe or union, complete all as specified and directed by Engr-in-charges. |
| 16 | S & F in repairs for 15mm bore Brass CP Wall Mixer with Provision for Overhead Shower with 115mm Long Bend Pipe On Upper Side, Connecting Legs & Wall Flanges and for mixing hot & cold water screwed down for iron/CPVC pipe and fixed complete all as specified and directed by Engr-in-charges. |
| 17 | S&F in repair angle cock/stop cock 15mm dia chromium plated, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or unions, complete all as specified and directed by Engr-in-charges.(Note : Weight of cock shall not be less than 0.575kg) |
| 18 | S&Fin repair PVC connections 45cm long including 15mm bore PTMT nuts on both ends complete all as specified and directed by Engr-in-charges. |
| 19 | S&F in repair brass chromium plated tubular towel rail 20mm dia \"D\" type 60cm long between flanges complete all as specified and directed by Engr-in-charges. |
| 20 | S&F in repair brass chromium plated towel ring fixed including screws complete all as specified and directed by Engr-in-charges. |
| 21 | S&F in repair rotational molded polyethylene water storage tanks white tripple layered (cylindrical vertical with closed top) capacity 1000 Ltrhoisted and fixed in position including dismantling complete all as specified and directed by Engr-in-charges. |
| 22 | S&F in repair PTMT Float valves high pressure with epoxy coated aluminium rod & high density plastic ball screwed for 20mm bore pipes complete all as specified and directed by Engr-in-charges. |
| 23 | S&F in repair 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed fixed as in repairs complete all as specified and directed by Engr-in-charges. |
| 24 | S&F in repairs stainless steel grating openable 100mm dia with/without hole including fixing with white cement complete all as specified and directed by Engr-in-charges. |
| 25 | S&F in repair fancy type brass shower rose 125mm dia sizeof Rim and 30cm long CP brass pipe each with swivel joint complete all as specified and directed by Engr-in-charges. |
| 26 | S&F in repair glass shelf assembly consisting of made out of 5.5 mm thick glass shelf 12 cm wide with chromium plated bracket guard andrailing 60cm long complete all as specified and directed by Engr-in-charges. |
| 27 | M&L for Green Marble 30 cm x 30 cm x 12-15 mm thick machine cut prepolished embedded for bathroom wall as corner shelf round shapecomplete all as specified and directed by Engr-in-charges. |
| 28 | S&F in repair for 5.5mm thick looking mirror of selected quality, bevelled edge 600mmx450mm glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plug with chromium plated brass screw and cup washer, PVC beading & rubber packing complete all as specified and directed by Engr-in-charges. |
| 29 | Supply & fixedin repair soap dish, vitreous china white, approximate size 160x160x90mmcomplete all as specified and directed by Engr-in-charges. |
| 30 | Taking up or down steel tubing and connections of 15mm bore including cleaning for refixing or removal to store etc. complete all as specified and directed by Engr-in-charges. |
| 31 | All as item above but 20mm bore, complete all as specified and directed by Engr-in-charges. |
| 32 | M&L Steel Tubes 20mm bore, \"medium grade\", galvanised, with all fitting; laid in trenches and fixed complete to brick/stone wall or laid in floor concealed, complete all as specified and directed by Engr-in-charges. |
| 33 | M&L for Refixing of old steel tubing of 20mm bore and connections in new or old position (Walls, ceiling, floors, etc. complete all as specified and directed by Engr-in-charges. |
| 34 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings 16mm dia bore on walls/ceiling or laying in floors or fixing as in concealed to walls or in floors etc, and making good the surfaces matching to exsiting surfaces of walls/ floor complete all as specified and directed by Engr-in-charges. |
| 35 | Taking down wooden chowkhats or frames area exceeding 1.50 Sqm and not exceeding 4.00 Sqm (w/o taking off shutters from frames) and removing from site, complete all as specified and directed by Engr-in-charges. |
| 36 | Taking down wooden chowkhats or frames areanot exceeding 1.50 Sqm(w/o taking off shutters from frames) and removing from site, complete all as specified and directed by Engr-in-charges. |
| 37 | Taking down shutters of storage cupboard not exceeding 1.00 Sqm each leafand removing from site, complete all as specified and directed by Engr-in-charges. |
| 38 | S&F made 100% Solid WPC (Wood Polymer Composite) Door Frames of cross section 65 mm x 125 mm(moulded) having double rebated made from Wood Polymer Composite (Single Extruded Process) material comprising of virgin PVC polymer of K-Value 57-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ruce husk/wheat husk)and non toxic additives fabricated with meter joints after applying PVC solvent cement & screwed with full body treated star headed screws having minimum frame density of 780 Kg/cbm & manufactured by \"Rajshri/Echon or Eq\" an ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawal strength of (Min, 990N) Minimum compressive strength of 58 N/mm2, modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer prof, water/moisture proof & fire retardant & fixed in position with and including SS Dsh Fasteners/Hold Fast of required dia and length, Material test certificate and authentication should be compoulsory provided by the manufacturing company. complete all as specified and directed by Engr-in-charges. |
| 39 | S&F made 100% Solid WPC (Wood Polymer Composite) Door Frames of cross section 65mm x 100mm(moulded) having single rebated made from Wood Polymer Composite (Single Extruded Process) material comprising of virgin PVC polymer of K-Value 57-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ruce husk/wheat husk)and non toxic additives fabricated with meter joints after applying PVC solvent cement & screwed with full body treated star headed screws having minimum frame density of 780 Kg/cbm & manufactured by \"Rajshri/Echon or Eq\" an ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawal strength of (Min, 990N) Minimum compressive strength of 58 N/mm2, modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer prof, water/moisture proof & fire retardant & fixed in position with and including SS Dsh Fasteners/Hold Fast of required dia and length, Material test certificate and authentication should be compoulsory provided by the manufacturing company. complete all as specified and directed by Engr-in-charges. |
| 40 | S&F for factory made 2nd class hard wood 35mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed by Engr-in-charges. |
| 41 | S&F IInd class (hollock) hard wood factory made 35mm thick glazed skelton shutters, open rebated and prepared to receive glass, gauge etc. divided into squares edges of framing, plain, chamfered or rounded, mitred fitted with cut and mitred beads for securing glass/gauge etc. with sizes of members of shutters as specified in para 8.24(a) of SSR 2009 (Part I), complete all as specified and directed by Engr-in-charges. |
| 42 | S&F made 100% Solid WPC (Wood Polymer Composite) Door Frames of cross section 45mm x 70mm(moulded) having single rebated made from Wood Polymer Composite (Single Extruded Process) material comprising of virgin PVC polymer of K-Value 57-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ruce husk/wheat husk)and non toxic additives fabricated with meter joints after applying PVC solvent cement & screwed with full body treated star headed screws having minimum frame density of 780 Kg/cbm & manufactured by \"Rajshri/Echon or Eq\" an ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawal strength of (Min, 990N) Minimum compressive strength of 58 N/mm2, modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer prof, water/moisture proof & fire retardant & fixed in position with and including SS Dsh Fasteners/Hold Fast of required dia and length, Material test certificate and authentication should be compoulsory provided by the manufacturing company. complete all as specified and directed by Engr-in-charges. |
| 43 | S&F factory made solid PVC moulded door shutter with wood free EPS 28 to 30 mm thick (Stiles), with 2, 4, or 6 raised panel design with 2 mm thick moulded PVC sheet on the front page and 2 mm plane colour PVC sheet on back face supplying and fixing in frames at site complete all as specified and directed by Engr-in-charges. |
| 44 | M&L for two coat of synthetic enamel painting to new wood surface of any description, not otherwise described over 10cm width or girth including preparation of new surfaces over a coat of pink primer complete all as specified and directed by Engr-in-charges. |
| 45 | S&F of 200 mm long aluminium anbodised barrel tower bolts of extruded section and fixed complete all as specified and directed by Engr-in-charges. |
| 46 | S&F of 150 mm long aluminium anbodised barrel tower bolts of extruded section and fixed complete all as specified and directed by Engr-in-charges. |
| 47 | S&F of 100 mm long Butt hinges type C-22, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed by Engr-in-charges. |
| 48 | S&F of 150 mm long Extruded aluminiumalloy handles, fabricatedtype anodised complete all as specified and directed by Engr-in-charges. |
| 49 | S&F of 100 mm butt hinges, medium weight cold rolled mild steel and fixed complete all as specified and directed by Engr-in-charges. |
| 50 | S&F of alluminum alloy, anodised, cast type or extruded section, sliding door bolt with hasp & staple (bolt type) with fixing clips and bolts and 300 mm long complete all as specified and directed by Engr-in-charges. |
| 51 | S&F of double legged door stopper of overall length of cover plate 150 mm of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floors and rubber complete all as specified and directed by Engr-in-charges. |
| 52 | S&F MS helical door spring 300 mm long fixed with screws to wooden chowkhats or fixed with welding to steel chowkhats. complete all as specified and directed by Engr-in-charges. |
| 53 | Taking down steel windows/ventilators with shutters area not exc. 1.0 Sqm each, from wall fixing complete all as specified and directed by Engr-in-charges. |
| 54 | Taking down steelwindows with shutters area exc. 1.0 Sqm but n exc. 2.0 Sqm each, from wall fixing complete all as specified and directed by Engr-in-charges. |
| 55 | M&L for providing and fixing of window, ventilator fabricated from roll formed sections made of galvanized steel colour coated /powder coated (Base steel as per IS 513 \"D\" quality, Galvanized as per IS 277 with Zinc of 120 grams/Sqm) with total coated thickness of 0.60 mm Paint specifications: Coated Sections should be coated with primer Coat of Epoxy Primer of 5-7 microns thick, finish painted with Polyster paint of 12-16 micorns thick and back coated with Alkyd backer of 5-7 microns, or Powder Coated with pure Polyster Powder up to 50-60 microns thick. Dimensions of Sections :Sections for Frame of 72mm x 50mm, Section for Mullion of size 72mm x 50mm, Section for Shutter Frame of size 47mm x 20mm, Section for Frame Glass Beads of 12mm x 12mm, and Section for Fly mesh of 40mm x 20mm. Fixing Details : Section for Frame Glazed Shutters and Mesh Shutters should be cut to length and miter joined with Polypropylene Corner Brackets, Mullion Section should be joined to the Frame/Mullion using Nylon Cap. Ethyl Propylene Daimine Monomer (EPDM) Gasket should be used all around glass in shutter and fixed galss. Rubber Gasket should be used around Fly mesh to fix in Mesh Shutter. Accesories: Each Glazed shutter should be provided with S.S. Pivot Hignes-01 set, Seccolor Handle & Seccolor Stay Glass: Glazed shutter and fixed glass portions to be provided with a glass of 5 mm plain float Glass. Mesh: Mesh shutter shall be provided with a stainless steel 32 guage Fly mesh of 304 grade with 144 holes per sq. Inch. Windows shall be provided with grill made of 10mm Sqm bars welded to at 150mm centre-to-centre, 6mm x 12mm MS flat Iron. Total grill unit should be powder coated and fixed to window frame with screws. Window frame should be fixed to brick/concrete masonory by using Nylon self-expanding caps and driving MS electroplated 80 mm long screws into the caps through frames. Note: The item includes everything as, painting the surfaces, fixing, all necessary accesories, glass, mesh, etc, all as per given spcifications, complete all as specified and directed by Engr-in-charge. |
| 56 | S&F in repairs of stainless steelwire cloth 0.36 mm nominal dia of wire & avg width of appertuer 1.40 mm fixed to Anodised aliminium framework of windows / vents& door shuttersetc complete all as specified and directed by Engr-in-charges. |
| 57 | S&F 12mm thick prelaminated particle board for storage shutter interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed by Engr-in-charges. |
| 58 | S&F 18mm thick prelaminated particle board for kitchen cabinet interior grade, prelaminated both sides with decorative choice lamination fixed with screws to timber frame work complete all as specified and directed by Engr-in-charges. |
| 59 | S&F Continious piano hinges, of mild steel bright finish or electrogalvanized with width of flap (when open) 30mm complete all as specified and directed by Engr-in-charges. |
| 60 | S&F 75mm long Brass handle, cast type, polished brightfixed with nut and screwsto cupboard shutter complete all as specified and directed by Engr-in-charges. |
| 61 | S&F magnetic ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed, complete all as specified and directed by Engr-in-charges. |
| 62 | S&F in repairsHarrison rails, mild steel, chromium plated decorative type curtain rod 22 to 25mm dia with fixing brackets and wall to wall for holding, stopper both ends(round type with mirror optic finish),rollers etc complete all as specified and directed by Engr-in-charges. |
| 63 | M&L for fabrication ofpressed steel cupboard shutterusing1mm thick MS plainsheet with frame 1.25mmthick bent toshape including two coat of synthetic enamel painton internal surfaces & two coat of hammer tonefinish on external surfacealongwithlocking arrangementmortice lock ,handle etc complete all as specified and directed by Engr-in-charges. |
| 64 | Demolition of reinforced cement concrete of any description and in any position not otherwise specially provided for including cutting of steel reinforcementas required to facilitate demolition, complete all as specified and directed by Engr-in-charges. |
| 65 | M&L for providing reinforced cement concrete 1:2:4 type B1 using (20mm graded stone aggregate) as in cooking platform slab supported on wall, beam, cantilevers and kitchen cooking platform including necessary formwork complete all as specified and directed by Engr-in-charges. |
| 66 | M&L for RCC (1:2:4) type B-1 using 20 mm gradedstone aggregateas in chajjas beams etc upto tripple storey bldgs including necessary formwork complete all as specified and directed by Engr-in-charges. |
| 67 | M&L mild steel TMT bars, 8 mm dia , cut to length, bent to shape required including cranking, binding spirally for hooping or column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm diaor securing with clips, complete all as specified and directed by Engr-in-charges. |
| 68 | Demolitioncement concretein any position not other wise specifically provided for complete all as specified and directed by Engr-in-charges. |
| 69 | M&L for PCC 1:2:4 type B-0 using (12.5 mm graded stone aggregate) as in padding on roof top including WPC as per manufacturers instructions to achieve the slop required, with minimum thickness of 25mm consolidated and finished even and fair without using extra cement. (WPC shall be measured and paid separately complete all as specified and directed by Engr-in-charges. |
| 70 | M&L for 10 mm thick screed bed or bedding layer in CM 1:3 mixed with water proofing compound as per manufacturer instructions on concrete roof surface finished fair and even to maintain the proper slope of roof surface etc NOTE: WPC shall be measured and paid separately complete all as specified and directed by Engr-in-charges. |
| 71 | M&L providing and applying roof treatment as folowing stages :-(i) Apply 1st coat of PU coating (ShaliUrethane LHM @ 650 gm/Sqm or eqivalent by brush/roller/spray. Spread non-woven geo-textile or glass fiber tissue of 45 GDM with overlaps of 50mm in both directions when the surface is still tacky, this is optional , to be assessed as per site requirements to acheive higher mechanical properties. complete all as specified and directed by Engr-in-charges.(ii) Allow 1st coat to dry for 10-12 Hrs.(iii) Apply 2nd coat of PU membrane (ShaliUrethane LHM @ 650 gm/Sqm or eqivalent) as per manufacturer\"s instructions. Extend waterproofing treatment up to 200mm and terminate into groov on the parapet wall.(iv) Protect the applied liquid membrane bu sprinkling sand @ 200gm/Sqm over the final coating when the surface is still tacky to facilitate plastering and including 25mm thick plastering in CM 1:3 with admixture and WPC.Note 1 : Treatment shall be done through authrised representative of manufacturer\"s instructions.Note 2 : Dismanteling/removal of APP membrane and other treatment of roof includes as rate quoted by contractors, no extra amount paid on this account. |
| 72 | Demolition of cement concrete (unreinforced) in ground floor and pavings not exceeding 15cm thickness below or above ground level andremovingmaterial from site complete all as specified and directed by Engr-in-charges. |
| 73 | M&L 75mm thick PCC type D-2, (1:4:8) using 40mm graded stone aggregate as in sub base complete all as specified and directed by Engr-in-charges. |
| 74 | S&F for PCC coloured interlocking ( glossy finishing) paver blocks confirming to IS-15658-2006 of 60 mm thickness, M-35 grade asin hardstandingetc. laid over and including 50 mm thick bedding layer of sand, complete all as specified and directed by Engr-in-charges. |
| 75 | M&L for PCC 1:2:4 type B-1 ( using 20mm graded mechanically crushed stone aggregate) as in bed blocks, copings, apex stones,side of interlocking tiles etc complete all as specified and directed by Engr-in-charges. |
| 76 | M&L for 75 mm thick Cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) as in plinth protection with fair finished complete. Note : Joints 12 mm wide to the full depth of PCC shall be provided at every 3 meters and at every change of direction and shall be filled with mixture of bitumen and sand 1:3 by weight. Cost of this provision shall be deemed to be included in the quoted rate for concrete in plinth protection. complete all as specified and directed by Engr-in-charges. |
| 77 | M&L for providing precast cement concrete louvres and jallies Type B0 1:2:4 (12.5 mm graded aggregate), 50mm thick (measured solid), including all mouldings but excluding frame set in CM 1:4 complete all as specified and directed by Engr-in-charges. |
| 78 | Taking down cement plaster from brick/stone walls, concrete surfaces including raking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed by Engr-in-charges. |
| 79 | M&L for 15mm thick rendering in cement mortar (1:6) on stone masonry or concrete surfaces (internal walls) of any description, finished the surface even and smooth without using extra cement complete all as specified and directed by Engr-in-charges. |
| 80 | M&L for 10mm thick average as baking coat rendering on fair faces of brick work surfaces (External walls) in cement mortar 1:6 rough finished even and fair, complete all as specified and directed by Engr-in-charges. |
| 81 | M&L for 15mm thick rendering on fair faces of brick work concrete surfaces (external walls) or stone walls upto tripple storey bldgs in cement mortar 1:4 mixed with liquid water proofing compound using as per manufacturer’s instructions,finished even and fair, complete all as specified and directed by Engr-in-charges. Note : (i) WPC shall be measured and paid separately. (ii) Rendering upto 9 mtr ht shallbe included in the quoted rate). |
| 82 | M&L 10 mm thick cement plaster in cement mortar 1:3 on ceiling,finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charges. |
| 83 | Supply only liquid water proofing compound, ISI marked complete all as specified and directed by Engr-in-charges. |
| 84 | M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper (acrylic) white or tinted over a coat of 1 mm thick wall care putty, complete all as specified and directed by Engr-in-charges. |
| 85 | M&L for preparation of new plastered surfaces of wall and applying two coats of weather coat over a coat of 1 mm thick wall care putty for neat and smooth finishing complete all as specified and directed by Engr-in-charges. |
| 86 | Material & Labour for preparing new plastered surfaces and applying two coats white wash over a coat of 1 mm thick wall care putty on ceiling complete all as specified and directed by Engr-in-charges. |
| 87 | M&L for preparation of old plastered or un-plastered surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil bound distemper (acrylic) white or tinted over a coat of priming over a coat of 1 mm thick wall care putty on walls upto tripple storeys bldg complete all as specified and directed by Engr-in-charges. |
| 88 | M&L for preparation of old plastered or un-plastered surface applying Two or more coats of 100% Premium acrylic emulsion paint (Weather Proof Paint)having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed by Engr-in-charges. |
| 89 | Material and labour for preparation of old Plastered or un-plastered surfaces ofceiling by brooming down or steel wire brushing, scrapping down smoke soot moulds, moss, efflorescence salts treating oil and greasy spots etc and applying two coat of white wash on ceiling surfaces complete all as specified and directed by Engr-in-charges. |
| 90 | M&L for 10mm thick rendering on concrete surfaces of roof projection cornices & chajja etc finished fair and even without using extra cement including WPC in CM 1:4 incl taking down existing cement plaster and including necessary arrangements to work on roof projection, cornice & chajja etc. complete all as specified and directed by Engr-in-charges. |
| 91 | Supplying & laying 03 coats of reinforced acrylic coating ‘New Coat’ as on sunken floor applied @1.5 Ltr/Sqm in 03 coats to achieve total 1mm thickness in any position including cleaning surface of sunken slabwith wire brush/mechanical brush and with water thoroughly to remove all dust/dirt and loose particles to expose base concrete/sunkenslab etc including repairing of loose/defectivejointsand applying 15mm thick plasterin CM 1:3 to level the surface and treatment to be applied all as per manufacturers instructions, complete all as specified and directed by Engr-in-charges. |
| 92 | M&Lfor 100mm thick PCC 1:2:4 type B-1, (20mm graded aggregate) as in sunken floor complete all as specified and directed by Engr-in-charges. |
| 93 | M&L for Cutting holes but in stone walls built in cement mortar for kitchen exhaust & making good dismantled portion in CM(1:3) as required complete all as specified and directed by Engr-in-charges. |
| 94 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-charges. |
| 95 | S&F for mild steel framed work as in door chowkats/gate of angle or angle iron work as in fixing of Storage shutter frame/cooler stand by drilling/cutting the stone masonry wall and fixing up to 1st floor walls, other section of grade Fe-290-Gde E-165 with gusset plate rails, braces etc welded/drilled to fixing of steel sheeting or other covering doors etc. to be prepared for sliding or hanging with and including either hooks and hinges or steel hanging door fittings (exclusive steel sheeting or other covering, running rails & guides), complete all as specified and as directed by the Engr-in-Charge. |
| 96 | M&L for two coat of synthetic enamel painting to new steel surface of any description, not otherwise described over 10cm width or girth including preparation of new surfaces over a coat of red oxide primer complete all as specified and directed by Engr-in-charges. |
| 97 | Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed by Engr-in-charges. |
| 98 | S&F0.50 mm thick prepainted galvalume aluminium zinc coating AZ-150 GI based corrugated steel coloured having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws at every alternate corrugation complete all as specified and directed by Engr-in-charges. |
| 99 | S&F for steel work in tubular pipes (hollow) square or rectangular including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979 grade st 240 etc in framed work as in doors or gates of pipes or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed by Engr-in-charges. |
| 100 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed by Engr-in-charges. |
| 101 | Material & Labourfor Brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed by Engr-in-charges. |
| 102 | Dismantling of 75/100mm dia cast iron or reinforced concrete drain pipes, jointed in cement mortarand taking out complete all as specified and directed by Engr-in-charges. |
| 103 | S&F of 110mm dia PVC (SWR) type \"B\" pipe single sockets in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed by Engr-in-charges. |
| 104 | S&F of 110mm dia PVC (SWR) type \"B\" pipe single sockets in any length with rubber ring joints, fixed to wall complete all as specified and directed by Engr-in-charges. |
| 105 | S&F of 75mm dia PVC (SWR) type \"B\" pipe single sockets in any length with rubber ring joints, laid in trenches or in floor ccomplete all as specified and directed by Engr-in-charges. |
| 106 | S&F of 75mm dia PVC (SWR) type \"B\" pipe single sockets in any length with rubber ring joints, fixed to wall complete all as specified and directed by Engr-in-charges. |
| 107 | S&F of 110mm dia PVC (SWR) bends any radius including cutting of holes. complete all as specified and directed by Engr-in-charges. |
| 108 | S&F of 75mm dia PVC (SWR) bends any radius including cutting of holes. complete all as specified and directed by Engr-in-charges. |
| 109 | S&F of 110mm dia PVC (SWR) junction single, single (single \"T\") equal or unequal. complete all as specified and directed by Engr-in-charges. |
| 110 | S&F of 75mm dia PVC (SWR) junction single, single (single \"T\") equal or unequal. complete all as specified and directed by Engr-in-charges. |
| 111 | S&F of 75mm dia PVC (SWR) floor trap, with grating including jointing with solvant cement complete all as specified and directed by Engr-in-charges. |
| 112 | S&F of UPVC (SWR) gully trap 125/110 mm setting and jointing with solvant cement complete all as specified and directed by Engr-in-charges. |
| 113 | M&L for Vitrified out door tiles 400x400x10-12 mm thick digital design set, jointed and pointed in neat cement slurry as in floors with grey cement over & including over screed bed or bedding layer of mortar 20 mm thick Cement Mortar 1:6, complete all as specified and directed by Engr-in-charges. |
| 114 | Material and labour for rubbing/grinding and polishing with beeswax polish on existing Kota Stone Slab, complete all as specified and directed by Engr-in-charges. |
| 115 | Supply & fixed in repair vitreous china wash hand basin flatbackwhite of size 550mmx400mm with32 mm dia chromium plated waste coupling including flush pipe etc complete all as specified and directed by Engr-in-charges. |
| 116 | Supply and fixing in repairs vitreous china premium quality/1st quality wash down water closet pan (pedestal pattern), white (excluding flushing cistern & flush pipe) &incl 01 No ‘P’ or ‘S’ trap of dia 100mm includingprovn of lime concrete bedding, complete all as specified and directed by Engr-in-charges. |
| 117 | S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitcheen or laboratory with plugs, washers and wastes; including bedding in cement morter to dwarf wall or including fixing cantilever brackets and connecting union, coupling to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm. complete all as specified and directed by Engr-in-charges. |
| 118 | S&F in repair 15mm bore concealed stop valve fancy type chromium plated cast copper alloy screwed down high pressure screwed both ends for iron pipe or for unioncomplete all as specified and directed by Engr-in-charges. |
| 119 | S&F in repairs,15mm bore pillar tap, fancy type, chromium plated cast copper alloy with capstan head, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks, complete all as specified and directed by Engr-in-charges. |
| 120 | S&F in repair rotational molded polyethylene water storage tanks white tripple layered (cylindrical vertical with closed top) capacity 500 Ltrhoisted and fixed in position including dismantling complete all as specified and directed by Engr-in-charges. |
| 121 | Supply & Fixingin repair Corner glass shelf size 200 mm radius with and including bracket and glass complete all as specified and directed by Engr-in-charges. |
| 122 | M&L Steel Tubes 15mm bore, \"medium grade\", galvanised, with all fitting; laid in trenches and fixed complete to brick/stone wall or laid in floor concealed, complete all as specified and directed by Engr-in-charges. |
| 123 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N / m2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fie retardant WPC to be laminated with PVC foil of minimum 14 micron thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, complete all as specified and directed by Engr-in-charges. (Note : Stainless steel butt hinges and necessary SS screws shall be paid separately). |
| 124 | M&L mild steel TMT bars, 10 mm dia , cut to length, bent to shape required including cranking, binding spirally for hooping or column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm diaor securing with clips, complete all as specified and directed by Engr-in-charges. |
| 125 | Material & Labour for brickwork with old size fly ash bricks straight or curved on plan exc. 6 M mean radius built in CM 1:6, complete all as specified and directed by Engr-in-charges. |
| 126 | Supply and Laying of providing lowering, laying, aligning & fixing in position and joining at all level/depths full round HDPE DWC Pipes (Double Wall corrugated) of 200mm dia bore with reqd jointing accessories of SN-8 grade as per IS-16098 (Part-2) amended upto date in trenches in complete including all material, labour, sectional hydrotesting (including the cost and conveyance of water to site for testing) complete all as specified and directed by Engr-in-charges. |
| 127 | Taking down steel door with shutters area exc. 2.0 Sqm each, from wall fixing complete all as specified and directed by Engr-in-charges. |
| 128 | Supply & fixedPowder coatedaluminiumframe doors, windows, ventilators, partition etcfixed/openable type or sliding without sash bar, aluminium sectionweighing 0.55 kg/m including necessary jointing cleats, glazing clip,rubber packing, anodised aluminium snap beading, screw etc complete complete all as specified and directed by Engr-in-charges. Note :-minimum thickness of powder coating 50 micron. |
| 129 | S&F in repair double action heavy duty floor spring Hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation bos, main body with stailnless steel cover, govering poivet made of brass, other parts made of brass, other part made of mild steel heavy duty and fixed complete all as specified and directed by Engr-in-charges. |
| 130 | M&L for 5.5mm thick plain sheet glass, ordinary quality and glazing rubber beading in square exc 0.5 sqm in each pane complete all as specified and directed by Engr-in-charges. |
| 131 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed by Engr-in-charges. |
| 132 | Material & Labour for point wiring complete with 1.5 sqmm single core multi stranded copper conductor PVC insulated cable FRLS,1100 volts grade drawn through in concealed PVC conduit with all accessories fixed on the surface of Wall/ roof/ceiling / dash fasteners/ wooden gutties andcadmiumplated screws and new GI sunken box with 3 mm thick laminated sheet concealed in wall etc. including 1.5 sqmm unsheathed copper continuity conductor connected to common earth dolly. complete all as specified and directed by Engr-in-charges. |
| 133 | (a) One light point controlled by one 5 Amps SP switch |
| 134 | (b) One ceiling fan/ Exhaust point controlled by one 5 Amps SP switch |
| 135 | (c)One 3 pin 5 Amps socket outlet on same board |
| 136 | (d) One 3 Pin 5 Amps socket outlet on independent board |
| 137 | (e)One bell/buzzer point controlled by one push button on the independent board. |
| 138 | (f) One light point controlled by two 2-way switchws |
| 139 | M&L forpower point with 2.5 sqmm copper conductor including 2.5 sqmmcopper continuity conductor connected to common earth dollyand controlled by one 15 Amp switch complete all as specified and directed by Engr-in-charges. |
| 140 | Supply & Fixing switch piano, flush type single pole, one way 6 amps complete all as specified and directed by Engr-in-charges. |
| 141 | S&F switch piano flush type single pole two way 6 Amps. complete all as specified and directed by Engr-in-charges. |
| 142 | Supply & Fixing switch piano type 2 way 6 Amp complete all as specified and directed by Engr-in-charges. |
| 143 | Supply & Fixing switch Bell Push, flush type 5 amps complete all as specified and directed by Engr-in-charges. |
| 144 | Supply & Fixing Buzzer, Ding Dong AC 230 volt single pole complete all as specified and directed by Engr-in-charges. |
| 145 | M&L socket outlet 3 Pin, 6A flush type complete all as specified and directed by Engr-in-charges. |
| 146 | M&L socket outlet 2 in 1 ,3 pin, 6 Amps and 16 Amps flush type complete all as specified and directed by Engr-in-charges. |
| 147 | M&L switch 16 Amps complete all as specified and directed by Engr-in-charges. |
| 148 | Supply & Fixingofceiling rose, surface type bakelite 65 x 50 mm three terminal complete all as specified and directed by Engr-in-charges. |
| 149 | Supply & Fixing of lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed by Engr-in-charges. |
| 150 | Supply & Fixing ofceiling fan regulator stepped type electronic fan regulator flush type on 230 volts suitable for 1200/1400 mm sweep ceiling fan complete all as specified and directed by Engr-in-charges. |
| 151 | Taking down carefully, deposited to MES store and rehanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed by Engr-in-charges. |
| 152 | M&L for painting of existing ceiling fan complete, in situ with synthetic enamel paint by spraying including filing cabities with filler one coat after cleaning all dust etc complete all as specified and directed by Engr-in-charges. |
| 153 | Taking down old unsv exhaust fan, deposited to MES store and S&F exhaust fans AC single phase 240 Volts of size 200mm sweep steel body with louver and complete accessories including making hole with suitable size for Exhaust fan, after completion of work, finishing with cement and plastering and repainting with existing color complete all as specified and directed by Engr-in-charges. |
| 154 | Taking down carefully, depostied to MES store and refixing at the same place electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25/50 litre as existing complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed by Engr-in-charges. |
| 155 | Disconnecting electric connections and taking down old unserviceable main switches/ DB’s sheet metal enclorsures 02 ways, 4 ways, 8 ways/ duly fitted with MCB’s/ cutouts32 amps capacity including unserviceable wooden boards and making good the disturbed surface of the wall/ceiling complete all as specified and directed by Engr-in-charges. |
| 156 | Supply & FixingMCB distribution box 8 way double door powder coated sheet metal encloser 240 volts SPN including 200 amps rated bus bar of the following type complete all as specified and directed by Engr-in-charge. |
| 157 | M&L MCB TPN DB comprising of sheet metal enclosure double door suitable for mounting MCB 415 Volts 4 way includingdismantling old one. complete all as specified and directed by Engr-in-charges. |
| 158 | S&F MCB TPN 63 Amps 415V 10KA \"B\" curve miniature circuit breaker (MCB) and current carrying capacity in the DB complete with connection testing and commissioning. complete all as specified and directed by Engr-in-charges. |
| 159 | S&F RCBOs Double pole, 30mA 32 Amp rating for earth leakage, overload & short-circuit protection. complete all as specified and directed by Engr-in-charges. |
| 160 | Supply and fixing 240V 10KA \"C\" curve MCB SPN 32 Amp complete all as specified and directed by Engr-in-charge. |
| 161 | Supply and fixing 240V 10KA \"C\" curve MCB SP 6 to 32 Amp complete all as specified and directed by Engr-in-charge. |
| 162 | Disconnecting of unserviceable sub main wiring/Service connection of any size and including steel conduit and accessories & removing from site and making good the disturbed surfaces complete all as specified and directed by Engr-in-charges. |
| 163 | S&F for Submain wiring with two run ofsingle core 4 Sqmm multi stranded copper conductor cable drawn through and incl 25 mm dia PVC non metallic rigid conduits and the conduits accessories incl one run of earth continuity conductor with 4.0 sqmm multi stranded copper conductor cable complete all as specified and directed by Engr-in-charges. Note :- Two run of single core cable and one run of earth continuity conductor and one run of conduit shall be measured as one unit |
| 164 | S&F LED integrated batten tube light fittings 20W 4 Feet long complete up with twin core twisted flexible copper conductor cable of size 23/0.0076 complete all as specified and directed by Engr-in-charges. |
| 165 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-charges. |
| 166 | Supply and FixingLED Bulb12 Watt complete all as specified and directed by Engr-in-charges. |
| 167 | Supply and Fixing LED Bldg security light fitting 35 Watt 230 Volt outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, GI bracket with impact and corrosion resistant including thermal management in multiple optice complete with IP 65/66 protection complete all as specified and directed by Engr-in-charges. |
| 168 | Material & Labour forEarthing complete as per electrical plate No 3 of MES SSR Part I with galvanised Steel plate earth electrode 600mm x 600mm x 6mm buried directly in ground in a earth pit of depth not less than 2.25 meter below groundlevel , the top edge of earth plate at a depth not less than1.5 mtr below normal ground level connected to galvanisediron or steel earth lead wire 4 mm dia as earth lead by means of bolts, nuts and washers of GI & steel earth lead protected by galvanised iron or steel pipe 15 mmdia light grade and connected to main switch board or main control board watering pipe with funnel on upper sideshall be 20 mm dia GI medium grade including excavation and earth work in any type of soil, PCC pit, CI frame , CI cover 10mm thick with hinged to CI frame complete all as specified and directed by Engr-in-charges. Note :-(i) Irrespective of what is shownin electrical plate , the concretepit shall be in PCC 1:3:6 type C-1 and 40 mm thick pre-castCover slabof RCC 1:2:4 type B1 using 20 mm Gradedstoneaggregatewith suitable handle. (ii) Items includesthe cost of GI pipefor protection of earth strip including earthlead up to7.5 meter. |
| 169 | Taking down old unsv exhaust fan, deposited to MES store and S&F exhaust fans AC single phase 240 Volts of size 300mm sweep steel body with louver and complete accessories including making hole with suitable size for Exhaust fan, after completion of work, finishing with cement and plastering and repainting with existing color complete all as specified and directed by Engr-in-charges. |
| 170 | Supply and fixing PVC frame exhaust fan with lover shutter of size 200mm sweep 1280 RPM, air delivery 520 CMH, power input 28 W single phase 240 Volts connected complete all as specified and directed by Engr-in-charges. |
| 171 | Taking down old Sheet metal enclouser and supply and fix new sheet metal enclouser cubical type factory fabricated made out of 1.6 mm thick CRCA sheet with front sideopenable single door system powder coated painted to shade RAL 7032, PL Gasket, hinged single door ,IP-55 mounting plate made out of 2mm thick CRCA sheet steel and earth bolts etc. of size 400x400x200mm and making good finishes around the DB with cement and paint with existing colour complete all as specified and directed by Engr-in-charges.Note :-- Cost of any minor modification if required in fixing of the sheet metal enclouser as per site requirement and making good the disturbed surfaces matching with existing finish, will be deemed to be included in the cost of this item. |
| 172 | Supply & FixingMCB distribution box 12 way double door powder coated sheet metal encloser 240 volts SPN including 200 amps rated bus bar of the following type complete all as specified and directed by Engr-in-charge. |
| 173 | Supply, laying and testing cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of size16 sq mm 2 core. complete all as specified and directed by Engr-in-charges. |
| 174 | Excavating in trenches n.exc 1.5 m widthand n.exc 1.5m in depth for taking out cable and cable coverand getting out in hard/dense of soil. complete all as specified and directed by Engr-in-charges. |
| 175 | Returning, filling in, including spreading levelling, watering and well ramming in layers n.exc 25 Cm. complete all as specified and directed by Engr-in-charges. |
| 176 | Removing excavated materials n.exc 50 mtr depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed by Engr-in-charges. |
| 177 | M&L for spreading, levelling in layers n exc. 25 cm thick and ramming of sand cushioning to PVC/ XLPE cables with tibba sand and punning to provide required cover to UG cables. complete all as specified and directed by Engr-in-charges.Note :- For the purpose of payment only punned thickness will be measured. |
| 178 | Supply and laying reinforced precast concrete cable cover, class LV,type 1 flat, 250mm x 150mm x 40mm. complete all as specified and directed by Engr-in-charges. |
| 179 | Taking out old unserviceable protection pipe and supply and fix light grade, galvanised, with all fitting, laid in trenches 40 mm dia GI pipe for protection of cable complete all as specified and directed by Engr-in-charges. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
