|
| 1 | Dismantling floor, hearth or wall tilling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 2 | Dismantling wrought iron or mild steel work of any description not otherwise specifically provided for complete all as specified and as directed. |
| 3 | Supply and fix stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement including taking out old railing complete all as specified and directed. |
| 4 | M&L Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. complete all as specified and as directed. |
| 5 | Dismantling Plain or corrugated steel sheeting, any gauge,thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed. |
| 6 | S&F prepainted galvalume aluminium zinc coating GI based corrugated steelsheet 0.50 mm thick of an colour having tensile strength 550 MPA as in roof coveringin roof covering /cladding to wall,fixed withself tapping screws including providing of rubber washer/Bitumen washer with filling of Bitumen between joint of sheet and Self tapping screws complete all as specified. |
| 7 | S&F prepainted galvalume aluminium zinc coating GI based plainsteelsheet 0.50 mm thick of an colour having tensile strength 550 MPA as in roof coveringin roof covering /cladding to wall,fixed withself tapping screws including providing of rubber washer/Bitumen washer with filling of Bitumen between joint of sheet and Self tapping screws complete all as specified. |
| 8 | M&L for MS work as in Wind Tie in roof and MS structural works in trusses, etc with screwed ends including nuts, washers and mild steel plates for walls chimneys, roofs arches etc any kind rods and straining bolts conforming to Fe 410-0 or Fe 310-0 complete all as specified . |
| 9 | Material and Labour for vitrified ceramic tiles 8-10 mm thick polished area of each tiles not exceeding 0.36 sqm of any shade and any pattern (pattern consists combination of two or more tiles ) as in skirting etcjointed in neat cement slurry and pointed in colored cement to match colour tiles over and including 15mm thick screed bed in CM 1:6 and pointed in coloured cement to match coloured tiles complete complete all as specified and as directed.. Note:- (i) The colour, shade and pattern shall be approved by the GE during execution work. (ii) No extra cost shall be allowed for Removing and refixing and necesary cutting of door etc if any required during execution of work. |
| 10 | M&L Non - skid Ceramic tiles 7 to 8 mm thick area of eachtile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurryand pointed in white or coloured cement to match ,light shade, incl 15 mm thick rendering in CM (1:6) complete all as specified and directed. |
| 11 | M&L for digital design glazed ceramic coloured tilesin vertical surface of size of each tile 300 x 450 mm /350x250 mm and 7 to 8 mm thick fixed to set and joint in neat cement slurry and pointed in white or coloured cement to match the same complete all as specified and directed. |
| 12 | DismantlingWall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed. |
| 13 | Supply and fix anodised aluminium snap grid frame work for false ceiling with 605mm x 605mm size, consisting of main Tee of size 40 x 40 x 2mm, cross Tee of size 40 x 40 x 2mm and wall angle of size 40 x 40 x 2mm of approved make including all necessary cuttings, fixing of aluminium section firmly in position with and including steel hangers 6 mm dia G.I. wire (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60 mm long and expansion hold fasteners 40 mm long in soffit of slab/walls complete all as specifed and as directed including provision of with 4mm thick Non Asbestos boards, ordinary type for fixing in 600 mm x 600mm grid, fixed in ceiling, flat or sloping, complete all as specified and directed.Note :- Rate quoted above shall be deemed to include for making holes, cutting chassis if any required and making good to existing walls in cement mortar 1: 3 to match with existing surface finish as directed at site. |
| 14 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc laid and bedded and pointed in any mortar all as specified and as directed. |
| 15 | Material and Labour for Granite 20mm thick ( of any type table rubbed and polished) work machine cut as in steps, jambs pillars,window cills, cooking platforms and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with shade of granite and laidover and including 15mm thick cement mortar 1 :4 complete all as specified and directed. |
| 16 | Material and labour for chequered cement concrete tiles 30cm x 30cm x 25mm with grey cement and pigment,hydraulically machine pressed, set, jointed and pointed in neat cement slurry to match colour of tiles, over and including 15mm thick screed in CM 1:6 in floors complete all as specified and as directed. |
| 17 | Demolition of brick work / stone boulder / PCC block masonary, built in cement mortar or cement lime mortar including all quoins, arches pillars, etc including ashlar facing, dressed stone works,precast concrete articles and precast concrete block wallings complete all as specified and as directed. |
| 18 | M&L for Pre-cast cement concrete block masonry withsolid blocks using type C1(1:3:6) (20mm graded aggregate) ,size exc 10cm in width and setting in cement mortar 1:6 complete all as specified and directed. |
| 19 | Material and labour for rendering 10mm thick in Cement Mortar 1:6 on fair faces of brick walls or on concrete surfaces, finished even and smooth,without using extra cement complete all as specified and directed. |
| 20 | Material and labour for 15 mm thick renderingon brick/concrete surfaces in two layers in CM 1:4, finishing coat of 5mm thick, finished even and smooth without using extra cement complete all as specified and as directed. |
| 21 | Material and labour for preparation of of new plastered/concrete surfaces of walls and applying two coats ofacrylic distemperof approved shade/tint over a coat of primer,over 3mm thick wall care putty finish to achieveuniform smooth surface of wallall as specified and as directed. |
| 22 | Material and labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 23 | M&L for complete removal by Washing, rubbing down and stopping and preperation of distempered and painted surfaces of walls, pillars,cornices by brooming down etcincluding filling depressions of scrapped surfaces with wallcare putty (1 mm thick) and preparation of surfaces for further treatment and applying twocoats of distemperoil emulsion over a coat of primer complete all as specified & directed. |
| 24 | Material and labour for complete removal by Washing, rubbing down and stopping,preparing old external plaster surface of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 25 | Supply and Fix in repairs vitreous china wash down water closet Pedastal patternwhite (excluding flushing cistren ) including trap set, seat cover and fixing of flushing cistern, brackets, flushing pipeetc, etc. with\"P\" or \"S\" trap, making good the floor to match with existing floor complete all as specified and as directed. |
| 26 | Supply and fixing in repairs vitreous China wash hand basin, white (flat back or angle back type or counter top) of size 600X480mm including 32mm brass chromium plated waste fitting, a pair of cast iron bracket duly painted including cutting and pinning in ends making good disturbed surfaces in CM 1:3 excluding pillar tap but chain , plug and porcelain stopper, brackets etc all as specified and as directed. |
| 27 | Supply and fixing in repairs flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cisterncomplete all as specified and directed. |
| 28 | Supply and fix in repair 10 Ltr capacity PVC valveless, syphonic action type, flushing cistern low level, white, with inlet ball valve, float and handle including brackets, flushing pipe, 450mm long PVC Connection and connection to trap, and to flushing and making good to floor complete all as specified . |
| 29 | Supply and fix in repair 15mm dia pillar tap, cast copper alloy, chromium plated, with capstan head screwed down high pressure with or without lettered hot or cold with long screw shank and fly nutt screw foriron pipeMake: CERA /Parryware/Hindware |
| 30 | Supply and fix in repairs stop valves 15mm bore, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 31 | Supply and fix in repairs 15mm dia bib taps cast copper alloy fancy type chromium plated with crutch or butterfly handle screwed down , screwed for iron pipe or union complete all as specified and directed. |
| 32 | Supply and fix in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 33 | S&F in repairs Waste coupling of PTMT (half or full threaded) . (Minimum weight of 32mm -45gms/ 40mm-60 gms) |
| 34 | Supply and fixing in repairsPVC waste pipe 32mm dia with 40mm dia reducer, 90cm long for WHB/urinal outlet with 4 Nos screws for fixing pipes, complete all as specified and directed. |
| 35 | Taking up or down steel tubing 20 mm bore including connections, cleaning for refixing or removal to storeall as directed. |
| 36 | Supply and fixing galvanised steel water tubing medium grade 20 mm bore including all necessary fittings such as bends, L bows, short piece connections, backnuts, caps plugs, unions couplings, flanges, sockets etc,fixed to wall/floor/ceilingincluding necessary cutting/chauging in walls made of brick/concrete surface complete all as specified and as directed. |
| 37 | Taking up or down steel tubing 15 mm bore including connections, cleaning for refixing or removal to storeall as directed. |
| 38 | Supply and fixing galvanised steel water tubing medium grade 15 mm bore including all necessary fittings such as bends, L bows, short piece connections, backnuts, caps plugs, unions couplings, flanges, sockets etc,fixed to wall/floor/ceilingincluding necessary cutting/chauging in walls made of brick/concrete surface complete all as specified and as directed. |
| 39 | Taking down existing unserviceable water tank after disconnecting water supply line and Supply and fix Rotational moulded Polyetheylene Water Storage Tank 500 Ltr capacity Triple Layer (Cylinderical verticle with closed top) including 20mm dia GI Medium Grade 450mm long overflow and wash out pipe each with all required fittings, Checknut, Stopper etc complete hoisted and fixed in position, including all incoming and outgoing connection of GI pipe complete and including 25mm PTMT Ball valves high pressure wiith epoxy coated aluminium rodand high density plastic ball screwed for iron pipe complete for 20mm dia pipe fixed on roof top complete all as specified and directed. |
| 40 | Supply and fixin repairs Angle valve CP cast copper alloy, with capstan handle, screwed down, high pressure screwed both ends for 15 mm bore iron pipe or for unions and fixed complete all as specified and directed. |
| 41 | Supply and fix in repairs 2 way angle valves/2 in 1 angle cock, 15mm bore,quarter turn with wall flange, chromium plated, screwed down, high pressure with crutch or butterfly handle and fixed complete all as specified and directed. |
| 42 | Supply and fix in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 43 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4 sqm each complete all as specified and as directed. |
| 44 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm each complete all as specified and as directed. |
| 45 | Supply and fix powder coated (minimum thickness of powder coating 50 micron) aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, and sliding tower bolt 150mm long anodised aluminium snap beading, screws etc. complete all as specified and as directed. |
| 46 | Supply and fix aluminium powder coated (minimum thickness of powder coating 50 micron), frame for doors,windows, ventilators with one or more rebates with joint clip and using rubber beading etc complete all as specified and directed.Note:Glass panel/particle board panel filling shall be measured and paid separately. |
| 47 | S&F anodised aluminium window and ventilator shutter, side hung type type without sash bars, aluminium section weighing 0.55 kg/m including necessary joining cleat, glazing clips, rubber neoprene packing, anodised aluminium snap beading, scews anodised aluminium fittings such as peg stay 150mm long (01 No), hinges type B-21 100mm long (02 No) suitable handle (01 No) complete all as specified and as directed. |
| 48 | Supply and fix Powder Coated aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum coating of grade AC 15) of DG 102 design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved aluminium standard section around the opening, all complete as per requirement complete all as specified and directed. |
| 49 | Supply and fixing aluminium alloy,anodised, sliding door boltof length 250mm with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded section or cast-aluminium alloy complete all specified and as directed. |
| 50 | Supply and Fix 150mm long aluminium anodised barrel tower boltof extruded section all as specified and as directedby Eng-in-charge. |
| 51 | S&F aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of operature 1.40mm and fixed with aluminium wire staples |
| 52 | S&F aluminium (Die cast body) Door closer hydraulically regulated, designation No 2, universal type, suitable for door shutters 701 to 850mm in width and of weight between 36 ro 60 Kg complete all as specified and as directed |
| 53 | Supply and fixing floor door stopper aluminium alloy body and tongue, anodised with hard drawn steel spring, 150 mm over all length of cover platecomplete all as specified and as directed. |
| 54 | Supply and Fixing 5.5mm thick glass, ordinary quality and glazing with oil and putty in square exc 0.5 sqm in each pane complete all as specified and as directed. |
| 55 | Supply and Fixing 5.5mm thick glass, ordinary quality and glazing with oil and putty in square not exc 0.5 sqm in each pane complete all as specified and as directed. |
| 56 | Supply and fix Solar control film 50 micron reflective type sticked to glass panes as per instructions of manufacture\"s complete all as specified and as directed. |
| 57 | Material and Labour for pre-laminated particle board 12 mm thick, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with rubber beading and screws as in aluminium works etc completeall as specified and directed. |
| 58 | Demolition and breaking up 150mm bore drain pipes (RCC pipe/Salt glazed wareor Reinforced concrete) set in cement mortar including haunching and removing debris to a distance exc 1.5Km and n.exc 5Km all as specified and as directed. |
| 59 | S&F in repair PVC (SWR) pipes 110 mm dia. single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and as directed. |
| 60 | S&F PVC (SWR) bend 110 mm dia with access door complete all as specified and as directed. |
| 61 | Demolition of reinforced cement concrete of any description ad in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed. |
| 62 | Material and labour for providing reinforced cement concrete 1:2:4 type B1 nominal mix using 20mm graded stone aggregate as in in lintels upto 1.5m clear span and the likecomplete all as specified and as directed. Note : Reinforcement and form workshall be measured and paid separately. |
| 63 | Material and Labourfor TMT bar 10mm dia and over, cut to length, bent to shape required, including cranking,bending spirally for hooping ,for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 64 | M&Lmild steel TMT bars 5mm diaandover up to 10mm for stirrups cut to length , bent to shape required including cranking, bending, spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia bars confirming to Fe-410-S or Fe-410-0complete in all respect as specified and directed. |
| 65 | Taking down carefully copper/aluminium pointwiring(light,fan, socket or power) complete, (fittings suchasswitches,ceilingroses,pendants, regulators sockets etc. to be measured separately), removing materials to store for keepingin safe custody for reuse at site and making gooddisturbed surfaces of walls, floors, etc. |
| 66 | M&L point wiring complete with 1.5 Sqm sincle core PVC insulated unsheathed FRLS cable 1100 volts grade (ISI marked) with multi stranded copper conductor drawn through and including non-metallic rigid PVC medium grade conduit and conduit accessories (ISI) marked concealed in wall/fixed to roof, ceiling etc and incl provn of 1.5 sqmm PVC insulated multistranded unsheathed copper conductor cable FRLS (ISI marked) as earth continuity conductor, fabricated sunken terminal box made out of 1.60 mm thick sheet steel duly painted concealed in walls, with 3mm thick bakelite/PVC sheet ISI marked top cover with brass/chromium plated screws and cup washers for housing switches, socket outlets, fan regulators etc, all as specified and as directed for the following :- (a)One light point or one light/ exhaust fan/ fan point controlled by one switch with cables 1.5 sqmm size |
| 67 | all as per item no 66 herein above but for One socket point controlled by one switch on same board |
| 68 | M&L for concealed point wiring with two single core PVC insulated, unsheathed, FRLS multistranded unsheathed copper conductor cable of size 2.5 sqmm and one single core PVC insulated unsheathed FRLS stranded copper conductor of size 2.5 sqmm green in colour as earth lead through and including PVC rigid conduit( medium grade) with all fittings & accessories ISI marked including provn ofMS sunken boxes of appropriate size & thickness fixed flush to wall for 15/16 A switch-socket point on independent board complete. (Note:- Cutting chases and making good of disturbed surfaces with measured and paid separately) |
| 69 | M & L for point wiring using 4 Sqmm lSI marked 1.1 KV grade single core FR LS flexible cable, conforming to IS: 694-1990, having multi-drawn thin strands of electrolytic copper conductors, conforming to IS: 8130-1984 and insulation conforming to IS:5831-1984, for phase, neutral and earth continuity conductor connecting to earth dolly, drawn in and including not less than 20 mm NB PVC medium grade conduits (concealed), conforming to IS: 9537 (Part 3)- 1983, colour coded as specified in IS: 11353-1985, including factory made sunken, galvanized, not less than 1.00 mm thick modular flush sheet metal enclosure having top, bottom, side and back-wall knockout for conduit entry from any direction, conforming to IS: 14772- 2000 and suitable for modular cover-plates complete all as specified in IS: 732-1989 and directedfor 6 pin switch socket outlet 15 Amp on independent board complete all as specified and directed by Engineer in charge:-. |
| 70 | S&F switch piano flush type AC 230 Volts 6 Amps single pole one way (to be fitted with new light point) complete all specified and directed |
| 71 | Supply & fix switch socket combination outlet, 6 pin, 6 Amps, multipurpose, flush, non shutter, non inter locking type, 230 volt flushtype, white/ivory finish with fixing hole complete all as specified and directed by Engineer in charge. |
| 72 | Supply & fix switch socket combination, 6 pin, 15/16Amps, multipurpose , flush, shutter type, 230 volt flushtype, white/ivory finish with fixing hole complete all as specified and directed by Engineer in charge. |
| 73 | Supply and fix in repairs electronic fan regulator, 120/280W 250V stepped type, flush type complete all as specified and as directed. |
| 74 | Supply & fix in repairs Ceiling rose in poly carbonate 3 plates flush type 6 Amps, 250 volts AC complete all as specified and directed. |
| 75 | Supply and fixing in replacement of LED Panel Square, slim compact, aluminum die cast edge LED recess mounted downlightfixture panel fitting 24 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free even light distribution with driver suitable for roof ceiling, connecting up with Driver three core flexible copper conductor cable and fixture, complete all as specified and directed by Engr-in-Charge.Make-Havells Model No. LHEBAEP7IZ1W024 or equivalent in Philips/Bajaj/Crompton. |
| 76 | Supply and Fixing LED 20W Pride essential Batten 6500k,220V, White Decorative Ultra Slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient, complete all as specified and as directed. |
| 77 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 78 | Supply and fix in replacement of ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep min air delivery 210 CFM service value 6.00 BEE. Five Star rated with brushless direc current motor (BLDC), complete all as specified and as directed. |
| 79 | Supply and fix MCB SP 6-32 amp rating 240V, 10KA \"B\" curve miniature circuit breaker (MCB) of single pole in the MCB DB,IP 20 transparent lebel holder fully insulated safety shutters suitable for cable up to 35 Sqmm cross sectional area complete including suitable size copper Lugs complete all as specified and directed.Make: Indo Asian/ L&T/Crompton Greaves/Havells |
| 80 | Supply and fix MCB SPN 32 amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of single pole in the MCB DB complete with connection testing and commissioning complete all as specified and directed.Make: Indo Asian/ L&T/Crompton Greaves/Havells |
| 81 | Supply only MCB TPN 415 Volts, 50Hz, 3 phase of capacity 40 Amps to 100 Amps, C curve 10 KA breaking capacity, IP 20 transparent lebel holder fully insulated safety shutters completeincluding suitable sizecopper lugs complete fixed properly in DB and connecting/testing complete all as specified and as directed.Make: Indo Asian/ L&T/Crompton Greaves/Havells |
| 82 | Supply and fix Distribution board (DB) made out of sheet metal enclosure (CRCA sheet), dust and vermin proof, SPN 8 way with 200 Amps rated copper bus bar double doorprotection, neutral bar,earth bar, single pole and neutral 240 volts, MCBs used as incommer flush to wall complete all as specified and as directed. |
| 83 | Supply and fix Distribution board (DB) made out of sheet metal enclosure (CRCA sheet), dust and vermin proof, TPN 4 way with 200 Amps rated copper bus bar double doorprotection, neutral bar,earth bar, triple pole and neutral 415 volts,MCBs used as incommer Double door, flush to wall complete all as specified and as directed. |
| 84 | Supply and fix Exhaust Fan of size 380 mm sweep with louvers, with metal body AC 230 V, 50 Hz, 1200 RPMand connecting to ceiling rose terminals with 23/.0076 flexible cable, complete all specified and directed. Make:Havells/ Usha/Crompton Greaves. |
| 85 | Supply, laying or passing through pipe LT, XLPE insulated, galvanised steel stripor wire armoured electric power cable conforming to IS:7098 (Pt-I)-1988, heavy duty with stranded aluminium conductor 1100 Volts grade of size 16 Sqmm 4 core with necessary fixing arrangements such as lungs, glands and terminal etc including connecting/testing after taking out unserviceable LT UG cable from trenches/ polecomplete all as specified and directed.NOTE: Excavation, earth work shall be measured and paid for separately. |
| 86 | Material and labour for Sub main wiring using two runs of single corePVC insulated cable (FRLS) 10 sqmm copper conductor multi stranded and one run of 10 sqmm copper conductor insulated cable (FRLS)using as earth wire drawn through and including suitable sizerigid non-metallic PVC conduit, complete all as specified and directed. Note-3 run of 10 sqmm PVC copper wire and One run of PVC conduit shall be measured and paid as oneunit. |
| 87 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc, and cutting chases for concealed conduit wiring and making good, cutting not exc 10 cm girth,& as per site reqirement. complete all as specified and directed by Engineer in charge. |
| 88 | Material and labour for Cutting openings, through brick walls built in cement mortar for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m completeall as specified and as directed. |
| 89 | Supply and fix single pole and neutral enclouser with a two pin and earth plug and socket complete with one MCB single pole 20 Amps complete all as specified and directed. |
| 90 | Supply & fixing Air termination rod, single pointed, copper rod 12mm dia and 300mm long complete all as specified & directed |
| 91 | Supply and fixAluminium strip 25 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above groundcomplete all as specified and directed. |
| 92 | Material and Labour for test point termination block made of gunmetal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos 8 mm dia 25 mm long hexa head screws complete all as specified and directed. |
| 93 | Supply, install, test and commission ofLT Control panel board, indoor type, double door, cubical type, padestal mounted, of suitable size, CPRI approved having, IP 65, independent compartment for bus bar, incoming feeder and each out going feeders, dust and vermin proof & lockable, factory made, fabricated out of of 3.15 mm thick CRCA Sheet & MSangle iron section of 50X50X6 mm frame, front operated with locking arrangements suitable for 3 Phase 415 volts 50 Hz, AC supply,bus bar chamber with Horizontal aluminium bus bar of200.Amp rating for 3 phase and neutral4 wire system duly insulated with heat shrinkable type sleeves as per colour code, supported on epoxy insulators - 01 Setincl necessary copper cables of suitable size for MCCBs/MCBs / change over swicth / inter connections, common earth bus bar ofGI Strip 32 x 6 mm at bottom with panel board at two earth terminals, cable glands with independent plates at bottom for each out going and in coming cables in cable alley panel board and painted with powder coatingin siemens grey colour and provision for the following incoming and outgoing accessories all as approved andcomprising as under : The LT Panel comprising of the following:- |
| 94 | (a) MCCB 250 A,415 Volts, 4Pole, 36 KA- 01 Nos (Incomer)(b) MCCB 63 A,415 Volts, 4Pole, 16 KA- 03 Nos (out Going)(c) R Y B phase indicating lamp LED type -01 Sets of 03 Nos(d) 3Phase Digital Volt Meters - 01 Nos(e) 3Phase Digital Ammeter -01 Nos (f) CT 100/5A -01 Sets of 03 Nos(g) Copper Busbar 200 A with support duly Heat shrinkable PVC Sleeved- 04 nos(h) One empty chamber for housing of MCB\"s in future |
| 95 | Note: (i) The quoted rate includes the cost of suitable foundation recommended by the manufacturer of panel board.(ii) Connection of LT panel/starters/MCCBs through multi core copper conductor control cabl of suitable size (irrespective of length) is deemed to be included in the item(iii) The contractor shall submit the CPRI test certificate from manufacturer(iv) The contractor shall furnish original bill certificate ( Purchase voucher and test certificate) the LT panel manufacturer.(v) The contractor shall get the approval of make and drawing with specifications from GE before placing the order.(vi) Prior to manufacturing the general arrangement drawing design details of the LT panel shall be get approved from GE |
| 96 | M&L for earthing complete with Galvanised steel earth plate electrode of size 600mmx600mmx6mm, buried directly in ground (earth pit not less than 2.25 Mtr deep below normal ground level) with top edge of earth plate not less than 1.5 Mtrs deep below normal ground level, connected to GI earth wireof size 4 mm by means of brazing and connected to earthing test point / distribution board/equipments or any other indicated situation by means of brazing all as shown in electrical plate No.3 of SSR Part I (2009) and testing on completion including necessary excavation and earth work in any type of soil, returning filling, removing of soil. GI medium grade pipe 20 mm dia 1.5 mtr long with funnel wire mesh as watering pipe, and GI medium GI medium grade pipe 15mm dia as earth lead protection pipe.Earth pit chamber made of PCC 1:2:4 type B1 using 20mm graded stone aggregate including 40mm thick chamber cover made of 1:2:4 type B1 using 20mm graded stone aggregate and reinforced with 8mm dia TMT bars at 100 c/c on both ways precast chamber cover with lifting handle 16mm dia round bars including charcoal and common salt in alternate layer of 15cm thick covering all faces of earth electrode plate complete all as specified and directed.(Note :- (i) The rates quoted for the complete earthing shall deemed to include the cost of GI wire 4.00 mm dia and GI medium grade protection pipe up to 7.5 Mtrs.(ii) GI earth wire and GI medium grade protection pipe beyond 7.5 Mtrs length shall be measured and paid separately. |
| 97 | Schedule of Credit (Minus) Rs.41908.50 NOTE: Bidder shall insert credit amount of Rs. 41908.50as ratein Green field under Col-13. |
