|
| 1 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) any type and size not exc. 1.5 Sqm eachcomplete all as specified and directed. |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) any type and size exc. 1.5 Sqm but not exc. 4.00 Sqm eachcomplete all as specified and directed. |
| 3 | Demolition ofBrickwork but built in Cement Mortar complete all as speicified and directed |
| 4 | M&l Brick work with subclass‘B’ bricks, straight or curved on plan exc 6m mean radius, built in C:M 1:6 complete all as specified and directedcomplete all as specified and directed |
| 5 | Cutting openings, through brick walls built in cement mortar for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m, complete all as specified and as directed. |
| 6 | Taking down cement or cement lime plaster of any description on brick or stone walls and concrete surface of ceiling etc including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed. |
| 7 | M&L for rendering 15 mm thick on fair faces of brick work or concretesurfaces in cement mortar 1:6 and finished even and fair complete all as specified and directed . |
| 8 | M&L for rendering 15 mm thick on fair faces of brick work or concretesurfaces in cement mortar 1:4 and finished even and fair complete all as specified and directed by Engr-in-Charge. |
| 9 | Demolition of concrete (unreinforced) in Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed |
| 10 | M&L for 25mm thick cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in sub base complete all as specified and directed. |
| 11 | M&L Virified Ceramic tiles double charge homogenousin light shade /dark shade 15 mm thick (square/rectangular) polished) , area of each tiles 2400 x800mm as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick renderingin CM 1:4 complete all as specified and directed |
| 12 | M&L Virified Ceramic tiles light shade 10 mm thick (square/rectangular) polished (Design/ pattern in flooring as approved by GE), area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, such as skirting, dados, verticale surface etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 10 mm thick renderingin CM 1:4 including dismantling of exisiting complete all as specified and directed. |
| 13 | M&L Virified Ceramic tiles in light shade /dark shade 10 mm thick (square/rectangular) polished) , area of each tilesnot exceeding 0.36sqm,as in floor surfaceetc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick screed bedding in CM 1:4 complete includuing dismantling of the exisitng all as specified and directed. |
| 14 | M&L Virified Ceramic tiles in light shade /dark shade 10 mm thick (square/rectangular) polished), area of each tiles not exceeding 0.36sqm, as in skirting, dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 10 mm thick rendering in CM 1:3 complete includuing dismantling of the exisitng all as specified and directed |
| 15 | M & L Coloured Glazed ceramic tiles size600 x 300 x 7-8 mmthick, in vertical surface such as skirting, dados , etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match and over and incl 10 mm thick renderingin CM 1:4 and including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and dirtected by Engr-in-Charge |
| 16 | M & L Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.16 sqm but notexceeding 0.36 sqm, in floors etc, setand jointed in neat cement slurry and pointed in white or Coloured cement to match laid over and incl 15 mm thick avg screed bed in CM 1:4 and including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and dirtected by Engr-in-Charge |
| 17 | S&F 1st Class Hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed, complete all as specified and as directed. |
| 18 | S&F in 1st class Hardwood 35 mm Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats , but divided into squares, with plain, chamfered or roun ded, mitred and rebated sash bars, any numbers including Stainless steel wire mesh 0.36mm apperture complete all as specified and directed |
| 19 | S&F in 1st Class Hardwood 35mm Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats and framing of moulded on solid complete all as specified and directed |
| 20 | S&F for 150mm Brass barrel tower bolts ISI marked with cast or sheet barrel and rolled or cast bolts andfixed complete all as specified and directed by Engr-in-Charge. |
| 21 | S&F Brass butt hinges 150mm long medium weight cold rolled etc complete all as specified and directed by Engr-in-Charge. |
| 22 | S&F in Floor door stopper of brassbody and tongue, anodized, with hard drawn steel fixed in floor with over all length of cover plate 140 mm fixed in repairs complete. |
| 23 | S & F for Fancy type Stainless steel bright polished handles oval type of size 200mm size, complete all as specified and as directed. |
| 24 | Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+0.2mm). Window profile with hollow section with multi chamber. Frame (100mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor include cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) |
| 25 | M & L with fabrication & fixing tohorizontal & vertical shelves/ partations /sides/ top/ bottom/ back sides etc for Modular kitchen cabinate/ wardrobe/ cupboard/drawers made out of 17/18mm thick WPC / boards with white laminated colour on both sides, of approved qualityincluding paste to all exposed edge byedge Banding Tape including provision of cabinet for keeping baskets/ drawers etc and including taking down old any type cupboards , shelves etc all as specified and directed. (Design and pattern as approved by GE).(Make :Action tesa or equivalent as approved by GE) |
| 26 | Supply andfabrication & fixing of Modular KitchenMain Lower and Upper cabinet over kitchen shelf the area of front face shall be not less than 3.85 Sqm with inside depth varying from 0.45 cm to 0.70 cm , 2 no of Wall Hang cabinet with front face not less than 0.56 Sqm and 2 no wall hang canbinet with front area not less than 1.08 Sqm, 02No Standing Wall Cabinet with area not less than 1.38 depth varying from 0.45 cm to 0.90 Cm with Provision for keeping OTG/Oven etc font side, bottom & Top sides & adjacent sides and partions etcmade out of 18 mm thickWPC board (Action tesa or equivalent ). The front face shall be of laminate of high gloss from merino and the edges to be covered via 1.3 mm thick edge bending tape (colour of glossy laminates as approved by GE) including all accessories & fittings including ultra Soft Autoclosing hinges for shutters , thedrawers system innotech imported silent (08 of drawers 8 inches and 3 drawers of6 inches with PVC cutlerytray (02 no)and dish rack with drain board(2 No) for utensil incluidn rollers complete all as specified and as directed. |
| 27 | Dismantling of walls and celing existing old board (fibre pulp.insulation etc) or insulation boards/ slabs/ blanks any thickness including cover fillets etc, complete all as specified and as directed. |
| 28 | S & F plain gypsum board panel 12 mm thick on false ceiling (including any design/ cob design as required & pattern as approved by GE) with and including necessary GI frame work for seamless ceiling used with \"T\", channel or any section including screws, cleats, fasteners, clips and all required accessories, hangers etc of galvanized steel all as per manufacturer design conforming to IS-2095 and 2542(1981) the weight of the board shall be not less than 7 kg per sqm and including two coat of OBD over a coat of putty complete all as specified and directed. |
| 29 | M & L for french polishing on surfaces of any description , width or grith including cleaning and preparing the surface including a coat of wood two or more coatson old surface / work etc completed all as specified and directed |
| 30 | M & L for preparation of old/new plastered internal surfaces of wall/ceillingby mechanical sander of Asian/ Berger paints or equivalent makes viz xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying a coat of primer over already prepared surfaces of walls andapplying uniform thickness of plaster of paris putty of 2 mm thickness (avg)over wall/ceilling surface to prepare the surface even and smooth. etc and providing two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification and using roller brush , complete all as specified and directed by Engineer-in-Charge |
| 31 | M&L WPC decorative wall panels/louvers15 to 25 mm thick design paternwood grain teak finished (colour and design as approved by GE) prelaminated inclusive of fixing on to wall including moulding end caps with L / U beading etc fixed with PVC sleeves and screws as requiredat site including dismantling of the same complete all as specified and as directed. |
| 32 | S & F in reapirfor 10 mm thick (toughened glass with etching) of approved quality fixed inpartation/door\"s etc including necessary all stainless steel hardware fittings (As like frame , brackets, clits, jammers, stopers, handels etc) complete drilled for fixing with all fitting and fixture complete allasspecified and directed. |
| 33 | S & F in repairs Vitreous china With Cistern For Extended Wall Hung WC With PP Soft Close Seat Cover, Hinges, Dual Flush Cistern Fitting, Accessories Set, Size: 380x650x730 mm including connecetion to drain pipewith all fitting and fixturecomplete all as specified and as directed. Make & Cat Part : Jaquar-Cat No.FLS-WHT-5353PPZor equivalent in Marc / Kohler) |
| 34 | S&F in repair Brass CP Basin mixersingle lever central hole for making hot and cold water fixed as per manufacturers manual with long shunk and cup washers, screwed both ends suitable for 15mm bore GI Pipe joints to GI pipes or unions, complete all as specified and directed. Make : Jaquar Continental CON-CHR-167KNB and equivalent in make of listas approved by GE |
| 35 | S&F in repair brass chromium plated wall mixture 3 in 1 system withL- bendprovision forover head shower and suitable for 15mm bore GI pipe including three joints to steel pipes or unions and plugging and screwing to walls all as specified and directed. Make : Jaquar ContinentalCON-CHR-273KNUPR and equivalent in make of listas approved by GE |
| 36 | S & F in repair CP shower rose fancy type 200mm x 200mm size with600 mm long shower arm, fixed in repair to 15mm bore pipe, complete all as specified and as directed. (Make :Hindware /Jaquar or equivalent approved by GE) |
| 37 | S & F in repair 65 x 95 mm rectangular shape single flowhand shower ( body & face plate stainless with ABS body in chrome finish) with rubit cleaning system including flexible pipe and fixed complete all as specified and as directed. (Make : Jaquar cat part No HSH CHR 1657andequivalent in make of listas approved by GE |
| 38 | S & F in repairs ready made wall / floormounted Vanity box with Wash hand basin including Side Cabinet , base made of HDHQuotation Attached board, both side laminated and front side melamine surface , Size of Vanity box32 inch upto 56 inch includingWash hand basin with brass waste coupling. ( Design, colour and patern as approved by GE) Make : Hindware oras approved by GE) |
| 39 | Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, completeall as specified and directed. |
| 40 | Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 41 | S& F Mild Steel work in rafter , purlin, and other connected work including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240, completeall as specified and directed. |
| 42 | S & F framed work such as in Ornamenal gate,door frame, door shuters / gate of angle or other sectionwith gusset plates, rails, braces, etc complete , drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hings or steel hanging door fittings,including hings hold fast of Fe 410-W (Gde E-250 quality) etc complete all as specified. |
| 43 | M&L Cement concrete in foundations, filling and mass concrete type C2 1:3:6 using40 mm aggregate |
| 44 | M&L preparation of new steel Surfaces of any description, not otherwise descri-bed, over 10cm width or girth complete applying two coat of synthetic enamel paint over a coat of primer all as specified and as directed |
| 45 | Surface excavation not exc (not exceeding) 30 cm deep and averaging 15cm deepIin hard and dense soil and getting out Compelte all as speicified and directed |
| 46 | Hardcore of gauge not exc. 63 mm, deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed |
| 47 | M & L for 75mm thick PCC 1:3:6 Type C-2 (using 40mm graded agg) as in sub base of floor complete all as specified and as directed. |
| 48 | M&L forMachine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 80 mm thickness incluidng 50 mm thick Sand Bed M-40Grade with grey cementand pigment complete all as specified and directed |
| 49 | M & L for OUT DOOR coloured ceramic heavy duty tiles 10 to 15 mm thick (square/ rectangular) area of each tiles not exceeding 0.16sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete tiles all as specified. |
| 50 | Providing and fixing \"RAJSHRI\" Brand factory or equivalent made WPC railing combining WPC board 24 mm thick Fancy designer type grating and includingWPC frame 100% solid WPC (wood polymer composite) railing of required length and of 2\" to 2.5\" height , comprising of virgin PVC resin of K value 58-60 (Suspension Grade) , Calcium Carbonate and natural fibres (Wood Powders/rice husk//wheat husk) and non toxic additives, made from single extrusion process, WPC foam board with having minimum density 650kg/cbm and WPC frame having minimum density 780kg/cum manufactured by \"RAJSHRI\" an ISO 9001-2015 certified Company, having good screw holding capacity (screw withdrawal strength of 2000N (Face) & 1100N (Edge) , Minimum comprising of 50N/mm2, Modules of elasticity 850N/mm2 and resistance of speed of flame of class A category with property of being termite/Borer free water /Moisture proof and fire resistance. For WPC railing WPC jali to be fixed with WPC frame of size 75x50mm with necessary supporting lengths at vertical as well as horizontal at wall frames to be fixed with 3\"x3\" GI \"L\" or SS cleats to support vertical frame lengths complete all as specified and as directed incluidng taking down exisitng RCC Jali(Make : Rajshree or equivalent) (Note : The said item shall be fixed for view cutter in any positions as requirement at site) |
| 51 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 75*50mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 52 | S&F exterior grade High Pressure Laminate (HPL) cladding panels with top coating havingaluminium based glossy finish 6 mm thick, UV-resistant, weather-proof, colour and texture as approved, conforming to relevant EN/IS standards, fixed on approved and including aluminium framework comprising extruded aluminium sections of required size and thickness, anchored to RCC/brickwork/steel surface with stainless steel fasteners, brackets and fixtures, including necessary spacers, expansion joints, EPDM gaskets, sealants, corner profiles, trims and all accessories, panels fixed true to line, level and plumb ensuring proper drainage and ventilation gap behind cladding, complete all as specified and as directed by Engineer-in-Charge |
| 53 | S & F Powder coated aluminium (minimum thickness of powdercoating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. ( Glass/ ACP paneel/partical board paid separately) |
| 54 | S&F 12 mm thick prelaminated particle board exterior grade, prelaminated both side with decorative choice lamination fixed with aluminium partition, door cupboad etccomplete all as specified and directed |
| 55 | S & F 6-8 mm thick Toughned glass fixed asin doors, partitionsand similar work including cutting to shape, drilling holes required icluding frosted on one side etc complete all as specified and directed |
| 56 | M & Lfor 20 mm thick granite (of any type) work( table rubbed and polished) as in floorwith Border as decided by GE and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slabincluding 15 mm thick screed bed in CM 1:3 and including dismantling of existing granite of any description including cement mortar bedding (but not backing ) and rubbish off the premises complete all as specified anddirected. |
| 57 | M & Lfor 18/20 mm thick granite (of any type) work( table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab including 10 mm thick screed bed in CM 1:3 complete all as specified anddirected. |
| 58 | Taking down/ out carefully copper/aluminium point wiring for light/fan/bell/ sockets 5/15 Amps complete without accessories as switches,Sockets, holders, ceiling roses, light fitting regulators etc (to be measured separately) and making good the disturbed surface all as directed. |
| 59 | M&L for point wiring with single core FRLS-H PVC insulated, unsheathed multi stranded copper conductor of size 1.5 sqmm alongwith 1.5 sqmm earth wire of multi strand copper conductor (with same specification) connected to common earth dolly drawing through andincludingconcealed PVC pipe mediium grade not less than 20 mm dia and suitable for modular box directed by Engineer-in-Chargefor mounting modular switches, sockets or fan regulators etc for one light point / fan point/ wall fan point/ bell/ buzzer controlled by one 1-way switch/ bell push.complete all as specified and as directed. |
| 60 | Description all as per item No. 59.00 herein before but one socket outlet point 5 amps on the same board. |
| 61 | Description all as per item No. 59.00 herein before but one socket outet point 5 amps on the independent board. |
| 62 | Description all as per item No. 59.00 herein before but with 2.50 Sqmm cable for independent point and using 2.50 sqmm PVC single core copper conductor cable multistranded as earth wire complete all as specified and directed. |
| 63 | S&Fmodular switch flush type,IP 20 rated,shrouded terminal 6 amps one way,SP,230 volts AC,Colour and design as directed by Engineer-in-Charge white/Black/Brown complete all as specified and directed.Make-Indoasian shynora,Anchor Roma,Legrand Avtear or equivalent. |
| 64 | S&F modular socket IP 20 rated,shrouded terminal outlet 6 ampsColour and design as directed by Engineer-in-Charge white/Black/Brown complete all as specified and directed. Make-Indoasian shynora,Anchor Roma,Legrand Avtear or equivalent. |
| 65 | S&F modular socket IP 20 rated,shrouded terminal outlet 6 & 16 amps Colour and design as directed by Engineer-in-Charge white/Black/Brown complete all as specified and directed.Make-Indoasian shynora,Anchor Roma,Legrand Avtear or equivalent. |
| 66 | S&Fmodular switch flush type,IP 20 rated,shrouded terminal 16 amps one way,SP,230 volts AC Colour and design as directed by Engineer-in-Charge white/Black/Browncomplete all as specified and directed. Make-Indoasian shynora,Anchor Roma,Legrand Avtear or equivalent. |
| 67 | S&F modular switch bell push flush typeIP 20 rated,shrouded terminal, 6 amps one way,SP,230 volts AC all as directed.Make-Indoasian shynora,Anchor Roma,Legrand Avtear or equivalent. |
| 68 | Supply and of Modular AC Socket IP 20 rated,shrouded terminal with 25 Amps SPmini MCB, 230 Volts, 50Hz. In 3 module sheet metal enclosure complete all as specified and as directed. Make-Indoasian shynora,Anchor Roma,Legrand Avtear or equivalent. |
| 69 | S & F of Ceiling rose, 3 terminal, pvc/polycabonate, isulated body all as specified and directed. |
| 70 | S&F modular Step Fan regulator, 70 watts single / double module all as directed.Make-Indoasian shynora, Anchor Roma, Legrand Avtear or equivalent. |
| 71 | S&F of bell DINGDONG type, 6 Amps, 240 volts, SP all as specified and directed.Make-Indoasian shynora,Anchor Roma,Legrand Avtear or equivalent. |
| 72 | Material and labour for replacement of submain wiring complete with 2 x 4.0 sqmm (nominal area) FRLS, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, and 1 x 4 sqmm (same specification) as earth wirein existing PVC conduit complete all as directed. |
| 73 | Supply and fixingin replacement of MCCB incommer Distribution Board ( Vertical Load line DB)double Doormade out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, VTPN 04 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCCB as incommer and MCB as outgoing and making all necessary connections and taking out the old unserviceable DB complete all as directed. |
| 74 | S&Fin replacementof MCCB 3 pole of capacity 160A, 10KA ics 100% with thermal magnetic release including spreader/thimble of suitable size and making connection complete all as specified and as directed. |
| 75 | S&F of MCB DB conforming to IP 43 - IK 09 with double door, SPN 12 way, double door complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces. |
| 76 | S&F of MCB DB conforming to IP 43 - IK 09 with double door,SPN 08 way, double door complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces. |
| 77 | Supply and fixing in replacement of MCB C Curve type, 10 kA, 10 to 32 Amp, Single Pole with over load and short circuit protection complete all as directed. |
| 78 | Supply and fixing in replacement MCB SPN 63 A including connections complete all as specified |
| 79 | S&F in replacement of rigid non metallic PVC conduit 25 mm dia inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hook etc complete including cutting chasis in wall and making good the surface all as specified and and as directed |
| 80 | S & F in Replacement of LED Bolard garden light Fittings with B22 LED lamp ,height of light 900 mm suitable for pathway lights includingmaking base of PCC 1:2:4 (45x45 cm) with fixing fastner,Nut,Bolts in PCCfrom ground level and making good electric connections, complete all as specified and as directed. Make :-1xRetrofit LED Lamp Cat No - Li-8158 or Equivalent |
| 81 | Supply and fixing in replacement of LED post top lantern fitting powder coated aluminium die cast and spun aluminium with clear/opal diffuser 36 Watt incl LED driver with gallary suitable for mounting on 40/50 mm GI pipe includingnecessary electric connections complete all as directed |
| 82 | S & F in replacement of energy efficicent LED fittings 45W LED 6K suitable for builing security light pressure die cast aluminium roadway luminaire with high power LEDs and HF electronic driver complete all as directed. |
| 83 | Supply and fixing in replacement of street light fitting bracket, 1.0 mtr long made out of galvanized iron pipe of 25 mm dia size light grade complete with nut, bolts, washer, clamps etc inclusive of one primer coat, one under coat and one finishing coat of silver paint complete all as directed. |
| 84 | S & F surface and wall mounted LED tube light fitting with Aluminium housing & interated electronic driver with tube rod of 10 Watt. slim elegant design.and including connected with 3 core 23/0.0076 insulated copper wire from celing rose to fittting connector all as specified and directed. |
| 85 | S & F surface and wall mounted LED tube light fitting with Aluminium housing & interated electronic driver with tube rod of 20 Watt. slim elegant design.and including connected with 3 core 23/0.0076 insulated copper wire from celing rose to fittting connector all as specified and directed. |
| 86 | Supply and fixingof wall light fittingwith and incl 9 wattLED lamp complete all as directed.Make :- Cat part No -2xRetrofit CFL/LED Cat No - Li-3627/2W or Equivalent |
| 87 | Supply and fixingof Bed side light fittingwith and incl 9 wattLED lamp complete all as directed.Make :- Cat part No -1xRetrofit CFL/LED Cat No - Li-3615/1W or Equivalent |
| 88 | S&F in Replacement cable PVC insulated copper conductor three core PVC sheathed circular 6 sqmm forelectrification in Garden lights, gate light etc. complete all as specified and as directed. |
| 89 | Supply and fixing in replacement of LED ceiling light fitting 15 watt, in round shape, surface/recess type cool/warm white as per site requirement and making all electric connections complete all as directed |
| 90 | Supply and fixing in replacement of Wall Mounted Fan 400 mm sweep plastic body type including making all electric connections and depositing the old u/s to MES store yardcomplete all as directed. |
| 91 | S&F in replacement of Ventilatingfan 250 mm sweep plastic body type including self cousing louver and making all electric connections,complete all as specified and asdirected. |
| 92 | Taking down Ceiling Fan/Exhaust Fan/Wall mounted fan, and depositing to MES store yard.complete all as specified and as directed. |
| 93 | S & F Exhaustfan upto 300 mm sweep metalic body typeand making all electric connections including depositing the old U/s item to MES store yard, complete all as specifed and as directed. |
| 94 | S&F BLDC (Brushless Direct Current) Ceiling Fan ( energy efficient), 1200 mm with IR Remote controlled also suitable for regulator, opertaing voltage 220V, minimum air delivery 265 CMM class of insulation \"F\" having full copper motor winding & ribbed 3 Nos A/M blades making necessary electric connection of suitable PVC copper wire from ceiling rose to ceiling fan complete all as specified and directed.The fan shall have BEE 5 star ratingand service value more than 7.1. complete all as specified and directed by Engr-in-Charge. Make-Atomberg (Aris Gladius)/ Atomberg (Erica Novo) or Equivalent . |
| 95 | S&F in replacement of in repair Modular white cover plate with frame 2 module all as directed |
| 96 | S&F in replacement of in repair Modular white cover plate with frame 4 module all as directed |
| 97 | S&F in replacement of in repair Modular white cover plate with frame 6 module all as directed |
| 98 | S&F in replacement of in repair Modular white cover plate with frame 8 module all as directed |
| 99 | S&F in replacement of in repair Modular white cover plate with frame 12 module all as directed |
| 100 | S&F in replacement of in repair Modular white cover plate with frame 16 module all as directed |
| 101 | S&F in replacement of in repair Modular white cover plate with frame 24 module all as directed |
| 102 | S&F in replacement of picture light of 12 Watts, metal body suitable for focus on Name plates/paintings complete all as specified. |
| 103 | M&Lof Modular Telephonesocket Jack 01 Module size(RJ 11 Socket Jack) complete with modular sheetas per site requirementcomplete all as directed by the Engr-In-Charge. |
| 104 | Taking down Ceiling Fan/Exhaust Fan/Wall mounted fan, and depositing to MES store yard.complete all as specified and as directed. |
| 105 | Supply, installation, testing, and commissioning of 10 Litre capacity electric storage Water Heater (Geyser) 5-Star BEE (Bureau of Energy Efficiency) rating, minimum 2kW (2000 Watts) heating element High-grade steel tank with Glass-lined/Porcelain Enamel or equivalent Anti-Corrosion coating (e.g., Titanium Enamel) suitable for hard water conditions Minimum 8 Bar Pressure Rating suitable for high-rise buildings and pressure pump applications High-density PUF (Polyurethane Foam) insulation to minimize heat loss and ensure energy efficiency, must include thermostat (automatic temperature control), thermal Cut-out (backup safety switch), and a Multi-Function Safety Valve (to relieve pressure and vacuum) including all necessary accessories: inlet/outlet connecting flexible pipes/hoses (Stainless Steel braiding, minimum 600 mm length), required wall fasteners, plugs, Teflon tape, and proper earthing connection to the nearest available earth point complete in all aspect allas specified and as directed. Make : Havells/ Usha/ AO Smith |
| 106 | Supply, installation, testing, and commissioning of 25 Litre Capacity Electric Storage Water Heater (Geyser) for domestic/commercial application 5-Star BEE (Bureau of Energy Efficiency) rated for maximum energy savings with 2000 Watts (2kW) heating element High-grade steel tank with Vitreous Enamel/Glass-lined or equivalent Anti-Corrosion coating (e.g., Titanium/Feroglas) suitable for use with hard water,Tank must include a Magnesium Anode Rod for additional corrosion protection Minimum 8 Bar Pressure Rating to ensure safe and efficient operation in high-rise buildings and homes utilizing pressure booster pumps High-density CFC-Free PUF (Polyurethane Foam) Insulation to retain heat for long durations and reduce standby power consumption High-quality heating element such as Incoloy 800 or Glass-Coated Copper for sustained performance and resistance to scaling Mandatory features include,thermostat (for temperature control), Thermal Cut-out (dual overheat protection), and Multi-Function Safety Valve (to relieve excess pressure and vacuum) include the cost of all required materials and accessories inlet/outlet Stainless Steel braided flexible connecting pipes/hoses (minimum 600 mm length), all necessary wall mounting fasteners, plugs, Teflon tape and proper earthing connection to the nearest available earth point complete in all aspect allas specified and as directed.Make : Havells/ Usha/ AO Smith |
| 107 | Supply, installation, testing, and commissioning of 35 Litre Capacity Electric Storage Water Heater (Geyser) for domestic/commercial application 5-Star BEE (Bureau of Energy Efficiency) rated for maximum energy savings with 2000 Watts (2kW) heating element High-grade steel tank with Vitreous Enamel/Glass-lined or equivalent Anti-Corrosion coating (e.g., Titanium/Feroglas) suitable for use with hard water,Tank must include a Magnesium Anode Rod for additional corrosion protection Minimum 8 Bar Pressure Rating to ensure safe and efficient operation in high-rise buildings and homes utilizing pressure booster pumps High-density CFC-Free PUF (Polyurethane Foam) Insulation to retain heat for long durations and reduce standby power consumption High-quality heating element such as Incoloy 800 or Glass-Coated Copper for sustained performance and resistance to scaling Mandatory features include,thermostat (for temperature control), Thermal Cut-out (dual overheat protection), and Multi-Function Safety Valve (to relieve excess pressure and vacuum) include the cost of all required materials and accessories inlet/outlet Stainless Steel braided flexible connecting pipes/hoses (minimum 600 mm length), all necessary wall mounting fasteners, plugs, Teflon tape and proper earthing connection to the nearest available earth point with minimum 2 years comprehensive product warranty and 5 years minimum warranty on the inner tank complete in all aspect allas specified and as directed.Make : Havells/ Usha/ AO Smith |
| 108 | Supply, installation, testing, and commissioning of a 50 Litre Capacity Electric Storage Water Heater (Geyser) for domestic/commercial application 5-Star BEE (Bureau of Energy Efficiency) rated for maximum energy savings with 2000 Watts (2kW) heating element High-grade steel tank with Vitreous Enamel/Glass-lined or equivalent Anti-Corrosion coating (e.g., Titanium/Feroglas) suitable for use with hard water,Tank must include a Magnesium Anode Rod for additional corrosion protection Minimum 8 Bar Pressure Rating to ensure safe and efficient operation in high-rise buildings and homes utilizing pressure booster pumps High-density CFC-Free PUF (Polyurethane Foam) Insulation to retain heat for long durations and reduce standby power consumption High-quality heating element such as Incoloy 800 or Glass-Coated Copper for sustained performance and resistance to scaling Mandatory features include,thermostat (for temperature control), Thermal Cut-out (dual overheat protection), and Multi-Function Safety Valve (to relieve excess pressure and vacuum) include the cost of all required materials and accessories inlet/outlet Stainless Steel braided flexible connecting pipes/hoses (minimum 600 mm length), all necessary wall mounting fasteners, plugs, Teflon tape and proper earthing connection to the nearest available earth pointcomplete in all aspect allas specified and as directed.Make : Havells/ Usha/ AO Smith |
