|
| 1 | Demolition of cement concreteof any description and in any position (unreinforced) in ground floors and paving not exceeding 15 cm thick (below or above GL) complete all as specified and directed. |
| 2 | M&L for 75mm thick cement concrete type C-1, 1:3:6 (20mm graded aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified and directed. |
| 3 | M&LPCC 1:4:8 type D2 using 40mm graded stone agg as in filling and mass concrete, Sub base/flooring complete all as specified and directed. |
| 4 | M&L for Hardcore of broken stone or boulder of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified |
| 5 | M&L for moroom/red bajri filling under floors or pavings, laid in layers n exc. 15 cm thick spread, levelled & rammed including watering complete all as specified and directed. |
| 6 | M&L, for PCC 1:2:4 type B-1 using 20mm graded stone agg as in coping on side of path/Hard Standing / similar work including necessary form work etc complete all as specified and directed. |
| 7 | Dismantling AC sheet roofing with ridge (corugated or semi corrugated) complete all as specified and directed. |
| 8 | S&F Pre-painted galvalume aluminium zinc coating AZ-150 GI based corrugated steel sheet 0.50 mm of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 9 | S&F Pre-painted galvalume aluminium zinc coating AZ-150 GI based profile sheet 0.50mm of an colour having tensile strength of 550 Mpa as in ridge of roofing, wall cladding fixed with self tapping screws complete all as specified and directed. |
| 10 | Dismantling timber scantling, framed /un framed workof 40 sq. cm and over in section in any position complete all as specified and directed. |
| 11 | S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.Fe-290 Gde E-165 and all as directed by engineer in charge. |
| 12 | Dismantling walland ceiling boards (fibre, pump, insulation etc,) or insulation boards of any thickness including cover fillets complete all as specified and directed. |
| 13 | S&Ffalse ceiling4 mm thick HPSC pre-prime non asbestos fibre cement building board ( size 600mm x 600 mm/ 595 mm x595 mm ) decorative finish fixed with clips and screw includingpowder coated galvanised MS grid frame work false ceiling of ( Main Tee size 32mmx24mmx0.50mm cross tee 24mmx24mmx0.30mm ) and with slot for fixing including suspended with 2mm dia. GIwirehangers fixed with steel dash through fasteners from purlineof the roof complete all as specified and as directed. |
| 14 | Demolition ofBrickwork of stone/boulder masonry, build in lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articlesl etc complete all as specified and as directed. |
| 15 | M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cm (1:6), rise of hight for brick wall complete all as specified and as directed. |
| 16 | M&L for brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and as directed. |
| 17 | Taking down old existing unserviceable HDPE water storage tank(PVC)of capacity n exc 500 ltrs etc complete all as specified and as directed. |
| 18 | Taking down old existing unserviceable HDPE water storage tank (PVC) of capacity exc 500 ltrs but n exc 1000ltrs complete all as specified and as directed. |
| 19 | S&F 500 ltr capacityrotational moulded polyethylene water storage tank (cylindrical vertical with closed top) WHITE , ISI marked , Triple layered construction hoisted and fixed in position including S&F 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia GI pipe medium grade overflow pipe 600mm long with fitting etc complete all as specified in SSR Part -I 2009 complete all as specified and as directed. |
| 20 | S&F 1000 ltr capacityrotational moulded polyethylene water storage tank (cylindrical vertical with closed top) WHITE , ISI marked , Triple layered construction hoisted and fixed in position including S&F 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia GI pipe medium grade overflow pipe 600mm long with fitting etccomplete all as specified in SSR Part -I 2009 complete all as specified and as directed. |
| 21 | S&F of 20mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimumweight 15mm-142gms 20mm-210gms /25mm-455gms/40mm-690gms complete all as specified and as directed. |
| 22 | S&F 20 mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. |
| 23 | Taking up or down existing 15 mm dia bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed |
| 24 | Taking up or down existing 20 mm dia bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed |
| 25 | S&F 15 mm diaCPVC pipes SDR 11with all plain CPVC SDR 11fittings & fixed complete to walls & ceiling or laid in trenches/floors etc complete all as specified and directed by EIC. |
| 26 | Supplying, fixing, jointing and testing galvanised iron 20 mm dia bore tubing medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed |
| 27 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises and complete all as specified and as directed. |
| 28 | M&L for double charged vitrified coloured ceramic tiles 10 mm thick (square/rectangular) polishedarea of each tileexceeding 0.42 sqm but not exceeding 1.00 sqm, in floors /vertical etc. set and jointed in neat cement slurryand pointed in white or coloured cement to match to floor etc including 15 mm screed bed with CM(1:6) complete all as specified and as directed. |
| 29 | M&L for non skidcoloured joint free ceramic tiles 7 to 8 mm thick (square/rectengular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurryand pointed in white or coloured cement to match to floor etc and including 15 mm screed bed with CM(1:6) completeall as specified and as directed. |
| 30 | M&L for joint free glazed ceramic coloured tiles in vertical surface 350x250x7 mm / 450x350x7mm / 300X600x7 mm thickset & jointed in neat cement slurry and pointed in white or coloured cement to match etccompleteall as specified and as directed. |
| 31 | M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick in CM(1:6) etc complete all as specified and directed. |
| 32 | Demolition of floors (other than ground floors), beams staircases, landing, beam, & similar suspended work Cement concrete (reinforced) complete all as specified and directed |
| 33 | M&L for Roughly squared stone lintels hammer dressed on face and soffits, hoisted, set and pointed in cement mortar 1:6 complete, n exc 3m in length all as specified and as directed. |
| 34 | M&L for toothing and bonding with cement mortar (1:6) for openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete all as specified and as directed. |
| 35 | M&L RCC type B1 (1:2:4) using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 36 | M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter in flat rough finished surface complete all as specified and as directed. |
| 37 | M&Lfor mild steel TMT bars ,10mm dia and over, cut to length bent to shape required including cranking bending spirally for hoping for coloumns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed. |
| 38 | All as above item No-37 but 6 to 8 mm dia TMT bar for strupps. |
| 39 | Taking down cement plaster on brick or stone wall including raking out joints, hocking for key scrubbing down with water etc complete all as specified and as directed. |
| 40 | M&L for rendering 15mm thick on fair faces of wall even and smooth finish without using extra cement onconc/brick surfaces in CM 1:6, complete all as specified and as directed |
| 41 | M&L for rendering 15 mm thick on external faces of brick work or concrete surfacesCM 1:4, and finishing the surface even and smooth without using extra cement completeall as specified and directed. |
| 42 | M & L for preparation of new plastered surfaceandapplying two coat ofoil bound distemper with roller on walls over a coat of chalk white priming coat complete all as specified and as directed. |
| 43 | M & L for Complete removal of existing treament of wall by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit and applying two coat of oil emulsion distemper on walls with roller over a coat of chalk white priming coat complete all as specified and as directed. |
| 44 | M&L for a coat of JK/Birla wall care putty 2mm thickincluding preparation of surface complete all as specified and as directed. |
| 45 | M&L for applying Two or more coats on new plastered surface of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over 1mm thick wall putty (for external suface) complete all as specified and directed. |
| 46 | M&L for applying Two or more coats on old surface of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over 1mm thick wall putty (for external suface) complete all as specified and directed. |
| 47 | M&L one coat synthetic enamel paint on old wooden surface incl prepartion of old surfaceof any description not otherwise described over 10 cm width or girth etc complete all as specified and as directed |
| 48 | M&L preparation of New steel surfaces over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed |
| 49 | M&L, preparing for old steel surfaces and applying one coats of synthetic enamel paint over 10 cm width or girth complete all as specified and as directed. |
| 50 | Taking downchowkhats or frames of any description n exc 1.5 sqm each (without taking off shutters from the frame) complete all as specified and as directed. |
| 51 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame)exe 1.5 Sqm but n exc 4 Sqm each etc complete all as specified and as directed |
| 52 | S&F powder coated aluminium frame straight for doors/windows/ using aluminium section of minimum size 100mmx44mmx2.00mm thick, 31mmx12mmx3.00mm thick & 49.91x44.45x1.3 mm thick and etc. fixed in position by means of steel screws and patent rawl plugs / bolts / hold fasts of suitable size complete all as specified and directed |
| 53 | M&L for powder coated anodised aluminium door shutter fabricated out of aluminium section 1.60mm thick two side openable with top rail and stiles of size 83x44mm, lock and bottom rail of size 100x44mm, (two panels) with and including 12mm thick plain colour PVC sheet (Rajshree make) and5mm thick ordinary sheet glass duly covered with tinted solar control film, including jointing cleats, glazing clips, rubber packing, aluminium anodised snap beading, screws, door stoper, anodised aluminium fittings such as hinges (B-21) handles (disc type), tower bolts (200mm long), locking device with duplicate keys complete all as specified and directed. |
| 54 | S&F Anodised aluminium window and ventilator shutters, sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. fittings complete all as specified. |
| 55 | S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 56 | S&F powder coated Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin- charge. |
| 57 | M&L framed work as grills, gratings, etc with ends of bars shouldered and/ or riveted into spikes; or forged into spikes, framed guard bars; barred iron doors, wind tie and similar work confirming to Fe 290. Gd-E-165 and complete all as specified and directed |
| 58 | S&F for aluminium die cast body door closer hydraulically regulated designation No 3 universal type, suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80 Kg and fixed in repair complete all as specified and as directed. |
| 59 | S&F in repair of door seal 20 to 25 mm wide 0.9 to 1.0 m length with GI Powder coated flap fixed to doors shutter with screws, complete all as specified and directed. |
| 60 | M&L Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawing complete all as specified and as directed. |
| 61 | S&F for Factory made solid panel PVC door shutter 30mm thick prelam(style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per manufacturer’s instructions including all fittingsMake : Rajshri /Black Cobra |
| 62 | S&F Butt hinges 100mm size, extruded SS hinge pin, anodised, type B-21 complete all as specified and as directed. |
| 63 | S&F in repair of extruded Aluminum anodised handles 150 mm long, fabricated type, complete all as specified and directed. |
| 64 | S&F in repair of Aluminium anodised barrel tower bolts 150 mm long and 12 mm diaof extruded section ISI Marks, complete all as specified and directed. |
| 65 | S&F 18/19 mm thick prelaminated particle board exterior grade prelaminated both side with decorative choice laminations and other side balancing white lamination fixed with screws to aluminum frame work etc complete all as specified and directed |
| 66 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 67 | S&F 4.8 mm thick, sheet glass, ordinary quality and glazing withoil putty in square in exc 0.5 sq.m in each pane etc complete all as specified and as directed. |
| 68 | S&F in repairs Vitreous chine wash down water closet pan with P or S trap (padestal pattern), white (EWC) including plastic seat of same colour of WC, closed pattern with flat bottom, and cover mild steel chromium plated hinging device complete all as specified and directed |
| 69 | S&F in repairs vitreous china squatting pan \"ORISSA PATTERN \" size 580mm x 440mm \"white with integral foot rest (excluding flushing cistern and flush pipe ) with \"P\" or \"S\" trap, front or back inlet including connection to trap and to flushing pipe anti syphonage pipe etc complete all as specified and as directed |
| 70 | S&F in repair 10 ltrs capacity PVC low level flushing cistern sleek plus single flush of colour star white with inlet, float valve and handle with 32 mm dia PVC pipe 600 mm long complete all as specified and as directed. |
| 71 | S&F in repair Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size(flat back or angle back type)including cutting for and fixed with granite counter top and waste pipe complete all as specified and directed |
| 72 | Suppy and fixing for 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick fancy type and fixedwith chromium plated brass screws and cup washers complete all as specified and directed by EIC. |
| 73 | S&F PVC connections 15mm size with PTMT nuts of length 600mm etc complete all as specified and as directed. |
| 74 | S&F 15mm bore cast copper alloy chromium plated angle cock with flangecomplete all as specified and as directed. |
| 75 | S&F 15mm bore cast copper alloy chromium plated two way angle cock with flangecomplete all as specified and as directed. |
| 76 | S&F in repair 15mm bore fancy type chromium plated bib cock long body with flangeetc complete all as specified and as directed. |
| 77 | S&F brass CP mixer 15mm dia bore mixing hot & cold water for wash hand basin screwed down for iron pipe and fixedall as directed. |
| 78 | S&F in repair of CP health faucet with 15 mm dia, 1.5 mtr long flexible tube & wall hook, made of cast copper alloy, complete all as specified and directed. |
| 79 | S&F in repair PVC floor 125/110mm trap/Nahani trap PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and directed |
| 80 | S&F CP Towel ring 600mm dia bore complete all as specified and directed |
| 81 | S&F 600mm CP towel rail \"D\" type fixed to wall with CP brass screws complete all as specified and as directed. |
| 82 | Supply and fixing 250-300mm size corner glass shelf with bracket fixed with screws and thickness of glass 8-10mm complete all as specified and as directed by Engineer-in-Charge. |
| 83 | S&F 25 mm dia chromium plated curtain rod with CP brackets and knobs at both end as per sample approved by Engineer-in-charge. |
| 84 | Dismantling of Stone slabs & tiles of any description or thickness in floors, aprons etc. Laid dry or laid dry & pointed complete all as specified and as directed. |
| 85 | M & L surface excavation n . exc 30cm deep and averaging 15cm deep and getting out soft and loose soil all as directed. |
| 86 | M & L 25 mm thick cement concrete type B-0 ( 12.5 mm graded stone aggregate ) 1:2:4 as in floor, finish rough toreceive the floor finishes complete all as specified and directed. |
| 87 | M&L forpre polished coloured precast machine pressed cement concrete chequered tiles ofglossy finish size 30cm x 30cm x 25mm thickconforming to IS : 1237-1980 shall be laid in neat cement slurry over and including 20 mm thick cement mortar screed in 1:4 and joints between the tiles to be filled tile grout or equilent complete all as specified and directed. |
| 88 | M&L Vitrified Heavy duty colour tiles 40cm x 40cm x 9 to10mm thick, set, jointed and pointed in neat cement slurry in floorsand wall over and including 15 mm thick cement mortar screed in 1:4 and joints between the tiles to be filled tile grout or equilent complete all as specified and directed. |
| 89 | M&L Providing and laying 60 mm thick factory made chamfered edge glossy finished cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape,made by table vibratory method using PU mould, laid in required colour & patternover and including 50 mm thick compacted bed of fine sand, compacting and properembedding/ laying of inter locking paver blocks into the sand bedding layer throughvibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sandt complete all as specified and directed. |
| 90 | S&F forSolid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on 5mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specifications and drawing complete all as specifiedand directed.Make : Rajshri /Black Cobra |
| 91 | S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall with clamp out of 25x3mm flate Iron including bolts and nuts 110mm bore complete all as specified and directed |
| 92 | S &F of 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed |
| 93 | S&F PVC (SWR) bends any radius 110mm bore complete all as specified and directed |
| 94 | S&F PVC (SWR) vent cowl 110mm bore complete all as specified and directed |
| 95 | S&F PVC (SWR) junction single, (single T) equal or unequal 110mm bore with access door complete all as specified and as directed. |
| 96 | S &F of 50 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed |
| 97 | S&F PVC (SWR) bends any radius 50 mm bore complete all as specified and directed |
| 98 | M & L for cement concrete type C2 (1:3:6) (using 20 mm graded stone aggregate) in surface channels, drains and manhole foundation etc.complete all as specified and as directed. |
| 99 | S&F SS chromium plated peg set of five fixing with wall complete all as specified and directed |
| 100 | M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.etc complete all as specified and as directed by Engineer-in-Charge. |
| 101 | S&F in repairs sink made up of stainless steel 1mm thick for kitchen or laboratory with plug washers and waste fittings including fixed with granite counter top and connecting union to pipe over all size 915mm x 460mm, bowl size 410 x 330 x 160mm etc complete all as specified and as directed by Engineer-in-Charge |
| 102 | Demolition and breaking drain pipe (salt glazed stoneware) set in cement mortar including packing under and haunching against side of pipe for 150 mm Internal dia of pipe complete all as specified and directed |
| 103 | M&L for concrete bed to drain pipes 150mm including packing under, and haunching againstthe sides of pipes after they are laid and tested; in cement concrete 1:4:8 complete all as specified and directed. |
| 104 | M&L for reinforced concrete pipes 150 mm boreclass NP3 laid and jointed on concrete bed complete including testing all as specified. |
| 105 | Excavation in trenches for fdn n.exc 1.5m wide and n.exc 1.5m in depth & getting out in soft /loose soil complete all as specified and directed. |
| 106 | Returning filling in including spreading ,levelling,watering and well ramming in layers not exc 25cm complete all as specified and directed |
| 107 | Removing excavated materials to a distance n.exc 50m and n exc 25CM above the starting point complete all as specified and directed |
| 108 | S&F 12mm thick toughened glass fordoors/ partitions automatic doors and similar work including cutting to shape, drilling holes required size crystal polished at the edges and full etched design as approved by AGE/GE in different colours fixed with SS brackets of size 50x25mm, 100mm long made out of 3mm thick SS sheet at the top and bottom including provision of Dorma XLC fittings and Dorma floor springs or SS pivot, stainless steel handles 600mm D type and locking arrangement to each door, SS hinges to connect glass to glass, wall to glass connector, magnetic seal, middle seal and the water dispenser etc complete all as specified. |
| 109 | Taking down carefully copper/ aluminium point wiring (light, fan, socket, or power) complete fitting such as switches, ceiling roses pendants, regulators, sockets, light fitting ceiling fan etc to be measured seperately ) removing materials for keeping in safe custody or for taking credit (credit for above items should be made as per conditions seperatly) and making good disturbed surface of walls floors etc all as specified and directed. Note-Responsibility after taking down fan/exhaust fan keep in safe custody of contractor and refix the same afterbefore completion of work the rate of same deemed to be included in the item quoated rate. |
| 110 | Taking down carefullyexisting wooden board , Main switch, MCB DB boxes with MCBs, sheet metal boxes, cut out, etc of any size anycapacity fromboards completeall as specified and as directed. |
| 111 | Taking down carefully sub main wiring / service connection twin core from wall / LT pole of any size of Aluminum with wooden batten and or through rigid conduit including GI wire and making good the disturbed surfaces of walls, roofs, floors etc complete all as specified and as directed. |
| 112 | M & L for concealed point wiring One light point controlled by one switch complete with PVC insulated and unsheathed flame retardant low smoke and halogen ( FRLSH ) cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit not less than 20 mm dia, clip, with MS terminal boxes (not less than 1.6mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including common earth dollywith3 mm thick plastic laminated sheet top cover of approved make and colour including 1.5 sqmm green multi stranded copper conductor as continuous earth wire with lugs complete including cutting necessary chases on wall / ceiling surfaces for drawing of conduit & cables as required and making good disturbed surfaces of walls with CM 1:3:6 and matching with the existing surfaces including colour washing all as specified and as directed. |
| 113 | Ditto all as per item No 109 above but one exhaust fan controlled by one switch and regulator. |
| 114 | Ditto all as per item No 109 above but 5 Amp socket outlet point controlled by one switch on independent board. |
| 115 | Ditto all as per item No 109 above but 5 Amp socket outlet point controlled by one switch on same board. |
| 116 | S&F modular socket 20Amps with MCB 20Amp \"C\" type complete all as specified and as directed.(for geyser & AC) |
| 117 | Description all as per item No 109 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed flame retardant low smoke ( FRLS ) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with 2.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed. |
| 118 | S&F switch pianoflush button type 5 Amp single pole one waycomplete all as specified and asdirected. |
| 119 | S&F socket outlet 2 in 1,3pin, 5 Amp flush type complete all as specified and asdirected. |
| 120 | S&F switch pianoflush button type 16/20 Amp single pole one way complete all as specified and asdirected. |
| 121 | S&F socket outlet2 in1, 3 pin, 5 Amp and 15 Amp flush type complete all as specified and asdirected. |
| 122 | S & F delux Fan Regulator electronic rotary, step type 240 Volt50 Hz,complete all as specified as directed. |
| 123 | S & F Lamp holder,PVC/Urea type with back plate suitable for batten fittingscomplete all as specified as directed |
| 124 | S & F 9W/10W LED retrofit lamp B-22 holder base with polycorbonate body and aluminium heat sink complete all as specified as directed. Make C&S Cat No LTHPLEDLAMP7W/B22 or equivalent make as specified in Appndx\"B\" to PS . |
| 125 | S&F sheet metal enclosure double doorconcealed suitable for distribution boards when MCBs to be used having 100 Amp rated bus bar SPN DB 8 ways 240 V complete all as specified and as directed . |
| 126 | S&F ceiling rose,surface polycarbonate63 x50mm three terminals completeall as specified and asdirected. |
| 127 | M&L, sub main wiringwith two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 6 sqmm size drawn in and includingnon metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 20 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 6 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed.(NOTE: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chasesin wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface. |
| 128 | S&F TPN DB-DPX 125 MCCB DBs 4 way single door with provision for DPX 125 MCCB and as incomer and SP/TP MCBs as outgoing Nos of modules DPX 125+12, including 125 Amp MCCBcomplete all as specified and directed. |
| 129 | S&F MCB single pole and neutral 40 Amp / 63 Amp 240 V ,10KA , \"C\" series, complete all as specified and as directed with copper lugs |
| 130 | S&F MCB single pole 6 to 32Amps 240 V,10KA, \"C\" series,complete all as specified and as directed |
| 131 | Supply and fixing in repair 22 W LED 6000kDecorative ultra slim linear LED fitting fixture with extruded polycarbonate ,environmental friendly ,energy efficentinterated driver and 28watts lamp fitted including wiring upto and terminal into ceiling rose complete all as specified and directed by Engr-in- Charge. |
| 132 | Supply and fix LED 35/36 W building security light fitting,5700 K energy saving & environmental friendly long life versatile pressure die cast aluminiumIP 66.road way luminare with high power LEDs as light source and electronic driver suitable for pole dia 35 mm including 35 mm dia light grade tube bracket ,bend to shape 1.80 mtrlength with two nos of clamps of size 50mm x 6mm with nuts and bolts,washers etcincluding connection with 1.5sqmm threesinglecorePVC insulated and PVC sheathed cable stranded copper cable upto ceiling rose and fixing on walls/pole complete all as specified and directed. |
| 133 | Supply and laying or fixing or passing through HDPE pipe, 1100 volts grade heavy duty cable with XLPE insulated stranded aluminium conductor served with an inner sheathing of PVC tape armoured with gaivanised steel or strip and overall PVC sheathed, 35 Sqmm 3.5 core ISI marked as per IS 7098(Part 1) including connecting on LT OH line/LT panel/DB with suitable lugs, glands, binding wire etccomplete all as specified and directed by Engineer-in-Charge. |
| 134 | S&F BLDC ceiling fan complete with three blade, down rod , snackel clamp, reel insulator, fan canopy, split pin and accessories 230V, 1200mm sweep with service value not less than 7.8, power consumption not more than 28-30 watt and minimum air delivry of 210-230 CMM, BEE 5 star rated , two core PVC insulared copper wire white sheathed of size 0.5Sqmm from fan connector to ceiling rosecompleted all as specified and directed. Note:- (i) Writing MES No in 20mm letter size with black paint etc is deemed to be included in quoted rate (ii) Old fan deposited in store yard |
| 135 | S&F in replacement of 40/42 W 2 feet X 2 feet LED Ultra modern recess mounting luminaire with high performance LEDs, suitable for mounting with Armstrong/Grid ceiling in MS housing with high brightness LEDs incl wiring upto and terminating into existing / new ceiling rose complete all as specified and directed .Make Crompton/Havells/Bajaj/Anchor panasonic/Benlo |
| 136 | S&F storage type water heater (Geyser),5 star BEE rating, 230 Volt AC, 25 Ltrs capacity comprising Stainless steel inner tank,suitable heatng element, thermostate with adjustable temperature setting , indication lamps provision for inlet outlet and air vent connections & NRV,inclucluding all fixing arrangement such s faster bolts, nuts washers etc complete including making gooddisturbed wall surfaces matching with the existing surfaces and finishing all as specified and as directed. |
| 137 | Supply and Fixing Exhaust fans AC single phase 230/240V of size 300 mm sweep, 1250-1350 RPM with louvre complete including with all arrangement of making holes on wall, making good and finishing of disturbed surfaces matching with the existing surfaces, necessary fixing arrangement such as fastener bolts, nuts, washers etc, of appropriate size all as specified and as directed |
| 138 | Material and labour for Double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, inner dia 38mm with smooth internal and profiled external surface, non-pressure type, laid in trenches/floors/duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends, etcfor protection of LT cable XLPE grade 1100 volts complete all as specified and directed by Engineer-in-Charge. |
| 139 | M&L pipe galvanised iron of size 50 mm dia, light grade ISI marked, complete with fittings laid in trenches/ fixed with poles etc as protection to cables complete as ditrected by Engineer in Charge |
| 140 | M&L for earthing completewith galvanisedsteelearth plateelectrode of size 600 mm x 600 mm x 6 mm thickweithing not less than 17.5 Kg buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade)and watering pipe 20 mm bore GI pipe(light grade) andchamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg.50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT 1, 2009 with charcoal dust and saltcomplete and earth leadconnected to earthing test point (up to main switches, DBs) completeall as specified &testing on completion. NOTE:-(I)item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii)PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra costof additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate. |
