Tender For Special Repair To Bldg No T-234 And Certain Revenue And Minor Work At Masimpur Military Station, Masimpur-Assam

TDR : 54247694

Tender Notice
BOQ

12 Days Left

Masimpur , Assam

Tender Brief : Tender For Special Repair To Bldg No T-234 And Certain Revenue And Minor Work At Masimpur Military Station

Document Fees
₹ 500 /-

EMD
₹ 89400.0 /-

Tender Value
₹ 44.70 Lakhs /-

Submission Date
17-03-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	B & R Division Items
2	Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and directed.
3	Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
4	Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and as directed.
5	Demolition of reed lathing, single or double including battens and plaster or chiken wire lathing all as specified.
6	Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to stores and rubbish off the premises.
7	Dismantling plain or corrugated steel sheeting, any gauge or any thickness as in roof covering, wall cladding, etc.including all necessary staging / scaffolding, etc. as required complete all as specified and as directed.
8	Dismantling of timber scantling 40 Sqcm and over in section, in any position in framed work complete all as specified and directed.
9	Dismantling wall and ceilingboards (fibre, pulb, insulation etc) or insulation boards slabs/blankets any thickness including cover fillets all as specified and as directed.
10	Dismantling PVC pipe 50/75/110 mm dia as in wall, floor, sewage line including clamps complete all as specified and directed.
11	Taking down roof trusses, coupled rafters or trussed beams clear span above 4 mtr and upto 8 mtr complete all as specified and directed.
12	Taking down cement plaster on brick or stone walls etc, including raking out joints, hacking for key scrubing down with water etc complete all as specified and as directed.
13	Taking down chowkhats or frame with shutters (without taking off shutters from frame) each not exceeding 1.50 Sqm each complete all as specified.
14	Taking down Chowkats or frames with shutters exceeding 1.5 Sqm but not exceeding 4 Sqm each (without taking off shutters from the frame) complete all as specified.
15	Taking up or down 15mm diaGI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.
16	Taking up or down 20mm diaGI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.
17	Surface dressing n exc 15 cm deep and gettingout in soft / lose soil complete all as specified
18	Excavation in trenches not exceeding 1.50 m wide and n.exc 1.5 m in depth for foundation of column, wall etc, not exc 10 sqm on plan and getting out in soft/loose soil etc complete all as specified and directed.
19	Returning, filling in trenches including spreading, leveling watering and ramming in layers not exceeding 25cm all as specified.
20	Removing of surplus soil not exceeding 50 m and deposited where directed at a level not exceeding 1.50m above the starting point all as specified.
21	Earth filling under floor incl spreading ,levelling & well ramming including watering as required n exc . 25 cm thick complete all as specified and directed.(Note :-Earthobtained from the relevant execavation items above mentioned will be used )
22	M&L forhardcore of broken stone gauge n exc 63mm, deposited, spread and leveled in layer n.exc 15cm thick, watered and rolled / rammed to a true surfaceall as specified and directed .
23	M&L for PCC (1:4:8), D2 using 40 mm graded stoneaggregate as in foundations, sub-base,filling and mass concrete complete all as specified.
24	M&Lfor providing 100 mm thick plain cement concrete (1:4:8) type D-2 using (40mm gradedstone aggregate) as in Sub base of floor fair and even complete all as specified.
25	M&Lfor providing 75 mm thick cement concrete (1:4:8) type D-2 using (40mm gradedstone aggregate) as in Sub base of floor rough surface complete all as specified.
26	Material and labour for cement concrete 75 mm thick PCC type C21:3:6 (40 mm graded aggregate) as in path , plinth protection,finished even and smooth without using extra cement complete all as described.
27	M&Lfor providing 75 mm thick cement concrete (1:3:6) type C-2 using (40mm gradedstone aggregate) as in Sub base of floor rough surface complete all as specified.
28	M & L for plain cement concrete (1:2:4) type B1 using 20mm graded aggreagate as in bed blocks, coping , cills, steps, kneelers, bed plates, apex stones kerbs and similar works including necessary formwork complete all as specified and directed.
29	M&Lfor providing 25 mm thick cement concrete (1:2:4) type B-1 using (20mm gradedstone aggregate) as in flooringto receive the topping layers complete all as specified.
30	M & L for Precast reinforcement cement concrete (1:2:4) type B1 using 20mm graded aggreagate as in cover slab for man holes, chullah hoods, chajja, water troughts, mangers, shelves and similar article with plain faces set in cement mortar (1:4) incl necessary formwork complete all as specified and directed.
31	Use and waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished flat surfaces of concrete complete all as specified and as directed.
32	Use and waste of Formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished flat surfaces of concreteall as specified and directed.
33	Use and waste Formwork to sides and soffits of floor or roof beam, beam hunching, girder, lintels, cantilever, shelves including supports, etc for rough finished flat surfaces of concrete complete all as specified and as directed.
34	Use and waste Formwork to soffits of suspended slabs such as roof slabs, landings and similar work, not exceeding 200mm thick( Horizontal or Sloping ), for rough finished flat surface of concrete all as specified and as directed.
35	Use and waste Formwork to edges of concrete flats,slabs etc incl fair finished surfaces exe 5cm but n.exe 10cm wide all as specified nd directed.
36	Material and labour for providing Reinforced Cement Concrete M-25 (Design Mix) using 20 mm graded aggregate as in foundation including rafts, footings, foundation beams, plinth beams, bases for columns etc complete all as specified and directed.
37	Material and labour for providing Reinforced Cement Concrete M-25 (Design Mix) using 20 mm graded aggregate as in columns, pillars, piers, posts and struts complete all as specified and directed.
38	Material and labour for providing Reinforced Cement Concrete M-25 (Design Mix) using 20mm aggregate as in slab supported on walls , beams, and column in floors, roof, landing, balconies, canopies, deck slab and in shelves and like etc comlpete all as specified and directed.
39	Material and labour for providing Reinforced Cement Concrete M-25 (Design Mix) using 20 mm graded aggregate as in beams, cantilever, lintels over 1.5 m complete all as specified and directed.
40	Material and labour for 10mm dia and over TMT bars, cut to length bend to shape as required including cranking, hooking etc and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.
41	Material and labour for 6mm to 8mm dia and over TMT bars, cut to length bend to shape as required including cranking, hooking etc and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.
42	Material and labour for Mild Steel TMT Bar 6mm dia and over up to 10 mm dia as in stirrups, spacers and binders as required including cranking, hooking etc and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed
43	M&L Brick work with sub-class `B\" bricks, straight or curved on plan exceeding 6mtr mean radius built in cement mortar 1:6 Complete all as specified and as directed.
44	M & L for half brick work in cement mortar (1:4) straight or curved on plan to any radius with locally available Subclass ‘B’ old size best quality bricks all as specified.
45	M & L for half brick work in cement mortar (1:4) straight or curved on plan to any radius with locally available Subclass ‘B’ old size best quality bricks except brick all as specified.Note : Old Bricks obtained from the relevant item will be used
46	M&L for 5 mm thick rendering in cement mortar (1:3) of cieling surfaces,finished even and smooth complete all as specified.
47	M&L for 10 mm thick rendering in cement mortar (1:6) on fair face of brick or concrete surface finished even and fair all as specified.
48	M&L for 10 mm thick rendering in cement mortar (1:6) on fair face of brick or concrete surface finished even and Smooth without using extra cement fair all as specified.
49	M&L for 10 mm thick rendering in cement mortar (1:6) on other side of lathing surface finished even and Smooth without using extra cement fair all as specified.
50	M&L for 10 mm thick rendering in cement mortar (1:3) on roof slab surface water proofing compound mixed with second layer @ 3% finished fair and even. ( Note -W.P.C. shall be measured and paid separetly).
51	M&L for 15 mm thick rendering in cement mortar (1:4) on fair face of brick or concrete surface finished even and Smooth(without using extra cement) fair all as specified.
52	M&L rendering 15 mm thick cement plaster in two layer Each of 10+5 mm thick on fair faces of brick wall or concrete surfaces in CM (1:4) & water proofing compound mixed with second layer @ 3% finished fair and even. ( Note -W.P.C. shall be measured and paid separetly).
53	Material and labour for Rendering/plastering, 15 mm thick (10mm + 5mm)in two layers in cement mortar (1:4) on one side of lathing of brick walls or concrete surfaces & water proofing compound mixed with second layer @ 3% finished fair and even. ( Note -W.P.C. shall be measured and paid separetly).
54	Supply only integral water proofing compound (ISI marked) complete all as specified and directed.
55	S&F for GI wire netting 0.71 mm dia and 12 mm mesh lathing to wood or metal studding joints etc in walls ceiling stanchion,beams etc included all laps cutting and wastes complete all as specified and directed.
56	Supply & laying3 mm thick(minimum) APP based polymeric membraneweighing not less than 3.0 kg/Sqm reinforced with polyester non woven fabric (weighing not less than160 gms/sqm) with minimum 100 mm transverse laps and 75 mm longitudinal lap over RCCand application shall be according to manufactures\"s instructions over cold solvent Bituminious primer @ 0.25 ltr/Sqm. Application of polymeric membrane shall be bytorching etc as per manufacturer\"s instruction and complete all as directed
57	M & LNon skid Ceramic coloured tiles7 to 8 mm thick (square/ rectangular) , area of each tiles exceeding 0.06 Sqm and not exceeding 0.11 sqm, in floors etc.set and jointed use in neat cement slurry 3.0 kg/sqm and pointed in white or coloured cement to match over & including15 mm thick screed bed or bedding layers in cement mortar 1:6 completeall as specified and directed.
58	M & L Non Skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including 15 mm thick screed bed or bedding layers in cement mortar 1:6 over brushing with neat cement slurry as specified
59	M & LGlazed ceramic coloured tilesin vertical surface size 450mm x 300mm x & ( 6mm to 7mm )mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over & including10mm thick screed bed or backing coat in cement mortar 1:4layingof skirting/dado on walls all as specified and directed.
60	M&L pre-polished chequered coloured paver tiles 25mm thick, area of each tile exceeding 0.06sqm but not exceeding 0.11sqm, in floors, set, jointed & pointed with neat white cement slurry mixed with pigment to match colour of tile, laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) &Brushing neat cement slurry with 3.0kg of cement per sq. metre (rate shall be included) complete all as specified and as directed.
61	Supply and fix pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified.
62	Supply and fix pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
63	Supply and fix Steel work in trusses, purlins, posts and the like using tubular/ square hollow sections including special shaped washer etc. complete using ERW or induction butt welded tubes/SHS conforming to IS.1161 - 2014 / IS.4923 - 1997 grade St.-240 complete all as specified and directed.
64	Supply and fix Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe 290 grade E-165 complete all as specified.
65	Supply and fix Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges large hasps and staples; chains; hand made slidingbolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers,hold fasts, bands, straps, wall ties, plain angle cleats, eaves board frame and similar articles conforming to Fe-290 Gde-E-165 completeall as specified and directed.
66	S&F Steel ventilator with top hung shutter including hinges, steel peg stay, lugs as in hold fast with locking arrangements, complete all as specified.
67	M & L for second class harwood timber scantlings in wrought sectionfixed to framed work scantling 40 sqcm and over in section in any position complete all as specified and directed.
68	M & L for 12 mm thick Prelaminated particle board,Exterior grade, prelaminated on bothside with decorative choice lamination & otherside balancing white lamination, all as directed.
69	S & F Solid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified in clause 8B.3.1 and shown on page 150 of MES Schedule Part-II (2010).
70	Supplying and fixing Factory Made Solid PVC Moulded Door (with particle Boardcore) Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawingg. Make: RAJASHRI PLASTIWOOD or equivalent make as approved by GE
71	S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004) complete all as specified. Make: Rajshri or equivalent as approved.
72	Supply and fix Factory made single extruded WPC (Wood Polymer Composite) solid door, window, Ceosetory windows, & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (MS. hold fast/ lugs or SS dash fasteners shall be paid for separately).Note For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account Ishall be made complete all as snecified and directed
73	Providing and fixing factory made single extruded WPC (Wood Polymer Composite, solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engineer- In- Charge (Note stainless steel butt hinges and necessary S.S screws shall be paid separately) complete all as specified
74	S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening all complete as per requirement and direction of Engineer-in-charge
75	S&F Powder coated aluminium frame (minimum thickness of powder coating 50 micron)for Door, window, ventilators with one or more rebatesincluding necessary jointing cleats, screws etc & fixed complete all as specified & directed.
76	S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters with frames of doors, windows (2-gauzed and 1-glazed) & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDMrubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.
77	Supply and fixStainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.
78	S&F 4.00 mm thick sheet glass ordinary quality and glazing with oil putting square exc 0.5 sqm in each pane complete all as specified.
79	S&F 3.00 mm thick sheet glass frosted ordinary quality and glazing with oil putting square nexc 0.5 sqm in each pane complete all as specified.
80	S&F 3.00 mm thick sheet glass figured, pin headed type and glazing with oil putting square nexc 0.5 sqm in each pane complete all as specified.
81	S&F 100mm MS Butt hinges, medium weight, cold rolledcomplete all as specified.
82	S&F 100mm long aluminum alloy Butt hinges, extruded, anodised with GI hinge pin fixed complete all as specified.
83	Supply and fix 150 mm long aluminium handles cast type anodised complete all as specified & directed .
84	Supply and fix 125 mm long aluminium handles cast type anodised complete all as specified & directed .
85	Supply and fix 150 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.
86	Supply and fix 100 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.
87	S&F PVC roller in Aluminium body of suitable size for sliding shutters complete all as specified.
88	S&F side locks of Aluminium body, suitable size for sliding shutters complete all as specified.
89	S&F Mortice lock, vertical type size 100mm, of brass 04 levers vertical type complete all as specified.
90	S&F Door closer hydraulically regulated, designation No. 3 universal type of cast iron body suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified.
91	S&F Door closer hydraulically regulated, designation No. 1 universal type of aluminum alloy body suitable for door shutters complete all as specified.
92	Supply and fix Vitreous China urinals, bowl type urinal flat back large size of 465mm x 355mm x 265mm white (minimum), with grating and union for discharge pipe (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.
93	S & F vitreous china wash and basin, white, flat back, size 550 mm x 400 mm fixed on MS bracket including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe, waste fitting,pipe and union complete all as specified and directed.
94	Supply and fix, as in repair,vitreous china wash basin, white flat back size 550 x 400 mm, excluding taps, waste chain, plug and porcelain stopper but including cp coupling, brackets, cutting for and pinning in ends of bracket or erecting stand complete all as specified.
95	Supply and fix as in repair vitreous china Squatting pan, \"Orissa\" pattern, Size 580 X 440mm ,with integral foot rests (excluding flushing ciestern and flush pipe) incl necessary lime concrete and 100 mm bore cast iron \"P\" trap with 550 to 600mm long neck for connecting WC to branch piece with cement joints complete all as specified & as directed .
96	Supply & Fixed Vitreous china wash down water closet pan ( pedestal pattern ) , whitewith P or S trap incl. seat cover but excluding fixing bolts, flushing cistern and flush pipe complete all as specified and as directed.
97	Supply & Fixed Vitreous plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminum hanging device complete all as specified and as directed.
98	S & F as in repair PVC valveless,syphonic action type,low level flushing cistren 10 ltr capacity ISI Marked incl all acessories and 32mm dia PVC flush / discharge pipe incl float valve, inlet complete all as specified.
99	S & F PVC valveless,syphonic action type,low level flushing cistren 10 ltr capacity ISI Marked incl all acessories and 32mm dia PVC flush / discharge pipe incl float valve, inlet complete all as specified.
100	S & Fvitreous china soap dish chromium plated approx. size 160mm x 160mm x 90mm fixed to plug complete all as specified.
101	S & F as in repair toilet paper holder recessed type vitreous china of approved design complete complete all as specified.
102	S & F as in repair PVC connections 15 mm size with PTMT nuts of length 450 m complete all as specified.
103	S & F PVC connections 15 mm size with PTMT nuts of length 450 m complete all as specified.
104	Supply and fix PTMT garting 100mm size round ( min wt 25 gram) complete all as specified.
105	Supply and fix asin repairs, 32 mm dia and 800mm long PVC flexible corrugated waste pipe for wash basin/sink complete all as specified and as directed.(Make : Prayag CAT No. 327 or equivalent)
106	S & F 15mm bore 2 in 1 tap cast copper alloy with capstan head, chromium plated concealed screwed down high pressure with or without hot or cold with long shunk screwed shanks and fly nuts screwed for iron pipes and connecting to water pipe line complete all specified and directed.
107	S & F as in repair 15mm bore pillar tap cast copper alloy with capstan head, fancy type, chromium plated, concealed screwed down high pressure with or without hot or cold with long shunk screwed shanks and fly nuts screwed for iron pipes and connecting to water pipe line complete all specified and directed.
108	S & F as in repair 15mm bore pillar tap cast copper alloy with capstan head, fancy type, chromium plated, concealed screwed down high pressure with or without hot or cold with long shunk screwed shanks and fly nuts screwed for iron pipes and connecting to water pipe line complete all specified and directed.
109	Supply and fix as in repair 15 mm bore bib taps fancy type, chromium plated, castcopper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified.
110	Supply and fix 15 mm bore bib taps fancy type, chromium plated, castcopper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified.
111	Supply and fix as in repair 15mm bore stop valve/angle valve, cast copper alloy cromium plated fancy type screwed down high pressure, with crutch or butterfly handle for 15 mm bore pipe or for unions all as specified.
112	S&F angle valves with flange 15mm bore, fancy type, half turn, cast copper alloy, chromium plated with long shank and cup screwed down, screwed both ends for iron pipe or for unions complete all as specified and directed.
113	Supply and fix Towel rail, 20mm dia brass chromium plated, 600mm long with fancy type brass chromium plated brackets on both sides and fixed with steel screws and wooden/rawl plugs as in repair complete all as specified.
114	S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified
115	Supply and fix 125mm dia CP brass shower rose with swivel joints, any colour including shower arm 15mm dia, 195mm long with bend of 45 degree with flange of CP brass as in repair complete all as specified.
116	Supply and fix 32mm dia waste coupling of PTMT ( half or full threated) min wt 32mm -45 gms complete all as specified.
117	S & F 600mm X 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed.
118	S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing, 60cm long fixed in position with CP screws complete all as specified and as directed
119	Supply and laying of CPVC pipe SDR 11 & plain CPVC SDR 11 of dia 20mm with fittings on wall/ ceiling or laying in floor complete all as specified.
120	Supply and laying of CPVC pipe SDR 11 & plain CPVC SDR 11 of dia 16mm with fittings on wall/ ceiling or laying in floor complete all as specified.
121	Supply and fix 110mm diaPVC (SWR) pipes single socketed, in any length, laid in trenches or in floors / fixed to walls complete all as specified.
122	Supply and fix 75mm diaPVC (SWR) pipes single socketed, in any length, laid in trenches or in floors / fixed to walls complete all as specified.
123	Supply and fix 110mm dia PVC (SWR) bend suitable for pipe complete all as specified.
124	Supply and fix 75mm dia PVC (SWR) bend suitable for pipe complete all as specified.
125	Supply and fix 110mm dia PVC (SWR) bend with access door suitable for pipe complete all as specified.
126	Supply and fix 75mm dia PVC (SWR) bend with access door suitable for pipe complete all as specified.
127	Supply & Fixed 110mm dia PVC (SWR) vent cowl suitable for pipe complete all as specified.
128	Supply & Fixed 75mm dia PVC (SWR) vent cowl suitable for pipe complete all as specified.
129	M & L75mm dia PVC(SWR) floor trap, outlet, plain with grating including jointing with solvent cement complete all as specified.
130	Supply and fix 110mm bore PVC (SWR) junction, single T equal or unequal with or without door access complete all as specified.
131	Supply & Fixed 110mm dia PVC (SWR) branch piece, single (single Y) equal or unequal with access door suitable for pipe complete all as specified.
132	Supply & Fixed 75mm dia PVC (SWR) branch piece, single (single Y) equal or unequal with access door suitable for pipe complete all as specified.
133	M&L for 150mm dia (internal) salt glazed stone ware drain pipes (Grade A) ISI Marked as in sewage lines laid in trenches and jointed complete all as specified and directed
134	M&L for plain cement concrete bed to drain pipe 150mm bore (Internal) as grade concrete (1:3:6) type C-2 with using 40mm graded crushed stone aggregate including packing under and haunching against the sides of pipes after they are laid and tested all complete all as specified and directed
135	M&L for plain cement concrete bed to drain pipe 110mm bore (Internal) as grade concrete (1:3:6) type C-2 with using 40mm graded crushed stone aggregate including packing under and haunching against the sides of pipes after they are laid and tested all complete all as specified and directed
136	Cuttinggrooves or rebates not exceeding 20 cm girth, and trimming with or without reinforced surfaces complete all as specified and directed.
137	S&F 15mm bore steel water tubing, medium grade, galvanised with screwed and socketed joints, in any length, including supply and fixing all fittings, ISI marked conforming to IS -1239 and fixed to walls or laid in floors / trenches required for water connections complete all as specified and as directed.
138	S&F 20mm bore steel water tubing, medium grade, galvanised with screwed and socketed joints, in any length, including supply and fixing all fittings, ISI marked conforming to IS -1239 and fixed to walls or laid in floors / trenches required for water connections complete all as specified and as directed.
139	S&F gun metal gate valve 20mm dia, cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for suitable iron pipe complete all as specified and directed.
140	Supplying, hoisting, fixing and connecting up 500 litre rotational moulded polythylene water storage tanks double layer (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I including connecting the overflow drain out, inlet and outlet pipes, tank nipple, elbow, bend, unions, sockets, etc. including taking down old damaged water tank and disposing off complete all as specified and as directed
141	S&F Ball valves high pressure of PTMT with epoxy coated aluminium rod & high- density plastic bal screwed for iron pipe and fixed (min wt 15mm-142gms/20mm-210gms/25mm- 455gms/40mm-690gms) for 25mm bore pipe complete all as specified and directed.
142	Material and labour for pre-painted designer false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system ) of grid size 600 mm x 600 mm with main runner 38 mm x 24 mm and wall angle 24 mm x 24 mm using 4 mm thick High Pressure Non Asbestos Fibre Cement prepainted decorative board (E-Board Classic)in a grid of GI system duly suspended with 4 mmdia GI bar hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures, air conditioning diffuser and ducts ,sprinkler ,smoke detectors etc. The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. the last hanger at the end of each main runner should not be placed at more than 450 mm from the adjacent wall, Flush fitting 1220 mm cross tee to be interlocked between main runners @ 610 mm c/c,so as to form 600 mm x 600 mm grid and painted with two coats of acrylic emulsion paint of approved shed /make over a coat of cement primer before installing it on the grid complete all as specified . Make: Everest Industries Ltd or equivalent as per IS 14862.
143	M & Lfor preparation of old decorated plastered or unplastered wall surfaces including brooming down or steel wire brushing , scrapping down smoke, soot , moulds , moss and efflorescent salts and trading oil and greasy spots etcand applying two coats of white wash complete all as specified and directed.
144	M & Lfor preparation of new wall surfaces incl cornices and applying three coats of white wash complete all as specified and directed.
145	M & Lfor preparation of new ceiling surfaces and applying three coats of white wash complete all as specified and directed.
146	M & Lfor preparation of old decorated plastered or unplastered wall surfaces including brooming down or steel wire brushing , scrapping down smoke, soot , moulds , moss and efflorescent salts and trading oil and greasy spots etcand applying two coats of oil emulsion distemper over a coat of wall primer with using roller complete all as specified and directed.
147	M & L preparation of new plastered surface of walls and applying two coat of oil emulsion distemper over one coat of primer with using roller complete all as specified.
148	Material and labour for preparation of new wall plasterd surfacesand applying 1 mm thick wall putty to prepare the surface even smooth complete all as specified.
149	Material & Labour for preparation of new plastered surface andapplying two or more coats of 100% Premium acrylic emulsion paint@ 1.67 ltr/10 Sqm having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified.
150	Material & Labour for preparation of old plastered surface applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm using roller complete all as specified and directed.
151	M & Lpreparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.
152	M & Lfor preparation of new wooden surfaces of any description not other wise described over 10 cm width or girth and applying two coat of Synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
153	M & Lfor preparation of old wooden surfaces of any description not other wise described over 10 cm width or girth and applying two coat of Synthetic enamel paintcomplete all as specified and as directed.
154	E & M Division items
155	Taking down carefully copper/aluminium point wiring (light, fan, buzzer, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc includingremoving from site for taking credit and making good to disturbed surface of walls, floors etc as per existing specification complete all as specified and as directed.
156	Taking down carefully submain wiring including all accessories without disturbing existing wiring fittings fixtures etc and making good to the disturbed surfaces all as directed and as specified in any type and size all as directed.
157	Dismantling old unserviceable main switches, sheet metal enclosures DB including MCBs etc and removing from site for taking credit incl making good to disturbed surface of wall as per existing specification complete all as specified and as directed.
158	Taking out old U/s light fittings any type with all fixtures etc complete all as specified and directed.
159	Taking out old unserviceable exhaust fan, ceiling fan any type and any size with all fixtures etc including depositing to MES storeyard for keeping in safe custody complete all as specified and as directed.
160	Taking out old U/s existing earthing with all fixtures etc complete all as specified and directed. (Excavation and earth work will be measured and paid separately under respective items)
161	Taking out old U/s XLPE cable of any size/type taking out of olf bricks/cable cover complete all as specified and directed. (Excavation and earth work will be measured and paid separately under respective items)
162	Dismantling of U/s GI pipe of size 40mm/50 mm bore complete all as specified and directed.
163	Taking out old U/s GI PIPE of 25mm/32mm bore size/type including all GI fittings etc complete all as specified and directed. (Excavation and earth work will be measured and paid separately under respective items)
164	M&L for point wiring with stranded copper conductor1.5 sqmm (nominal area), two single core, PVC insulated FRLSH cable 1100 volts grade, ISI-694 markedin and including heavy duty, PVC Conduit including all accessories etc ISI marked, with GI sunken box suitable for fixing switches, sockets and regulators including PVC insulated FRLSH stranded copper conductor 1.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for One light point controlled by one switch.
165	M&L for point wiring with stranded copper conductor1.5 sqmm (nominal area), two single core, PVC insulated FRLSH cable 1100 volts grade, ISI-694 markedin and including heavy duty, PVC Conduit including all accessories etc ISI marked, with GI sunken box suitable for fixing switches, sockets and regulators including PVC insulated FRLSH stranded copper conductor 1.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for One fan point/exhaust fan point controlled byone way switch 5 Amp.
166	M&L for point wiring with stranded copper conductor1.5 sqmm (nominal area), two single core, PVC insulated FRLSH cable 1100 volts grade, ISI-694 markedin and including heavy duty, PVC Conduit including all accessories etc ISI marked, with GI sunken box suitable for fixing switches, sockets and regulators including PVC insulated FRLSH stranded copper conductor 1.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for One bell point controlled by one bell switch 5 Amps
167	M&L for point wiring with stranded copper conductor1.5 sqmm (nominal area), two single core, PVC insulated FRLSH cable 1100 volts grade, ISI-694 markedin and including heavy duty, PVC Conduit including all accessories etc ISI marked, with GI sunken box suitable for fixing switches, sockets and regulators including PVC insulated FRLSH stranded copper conductor 1.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for One 3 pin 5 Amp socket outlet point controlled by one switch on the same board.
168	M&L for point wiring with stranded copper conductor1.5 sqmm (nominal area), two single core, PVC insulated FRLSH cable 1100 volts grade, ISI-694 markedin and including heavy duty, PVC Conduit including all accessories etc ISI marked, with GI sunken box suitable for fixing switches, sockets and regulators including PVC insulated FRLSH stranded copper conductor 1.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for One 3 pin 5 Amp socket outlet point controlled by one switch on independent board.
169	M&L for point wiring with stranded copper conductor2.5 sqmm (nominal area), two single core, PVC insulated FRLSH cable 1100 volts grade, ISI-694 markedin and including heavy duty, PVC Conduit including all accessories etc ISI marked, with GI sunken box suitable for fixing switches, sockets and regulators including PVC insulated stranded copper conductor 2.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for 3 pin, 15 Amp socket outlet, independent
170	M&L for point wiring with stranded copper conductor4.0 sqmm (nominal area), two single core, PVC insulated FRLSH cable 1100 volts grade, ISI-694 markedin and including heavy duty, PVC Conduit including all accessories etc ISI marked, with GI sunken box suitable for fixing switches, sockets and regulators including PVC insulated FRLSH stranded copper conductor 4.0 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for one power point on independent board of AC/equipments etc controlled by one SP/SPN MCB. Note: The point wiring will be done from DBs to the switch sockets of any size with three wires running independently for each point and with no tappings.
171	S&Fswitch piano flush type button single pole one way 5 Amps all as specified and directed.
172	S&F socket outlet 2 in 1, 3 pin 5 Amp flush type all as specified and directed.
173	S&Fswitch piano flush type button single pole one way 15 Amps all as specified and directed.
174	S&F Socket outlet 2 in 1, 3 pin, 5 and 15amp flush type all as specified and directed.
175	S&F Switch Socket combination 5 in 1, 5/16 Amp flush type complete all as specified and directed.
176	S&F ceiling rose surface bakelite with three terminals all as specified and directed
177	S&F lamp holder angular insulated body with back plate suitable for batten fittings complete all as specified and directed
178	S&F ceiling fan regulator socketed, step type, flush type heavy duty suitable to work on 230 volts Ac supply complete all as specified.
179	S&F bell push flush type 5 Amps complete all as specified and directed
180	S&F bell electric ding dong type suitable for operation on 230 volt 50 Hz AC supply complete all as specified.
181	M&L for submain wiring with two single core 1.5 sqmm PVC insulated unsheathed cable multi-strand copper conductor FRLSH drawn through and including PVC non metallic rigid PVC Conduit with all fittings and fixing accessories on roof, walls, ceiling etc including 1 x 1.5 sqmm PVC insulated FRLSH unsheathed multi strand copper conductor earth wire connecting earth including cutting groove for concealed wiring, making good to disturb surface of wall/floor with cement mortar and finishes to match existing complete all as specified and directed. Note: Two run of single core cable, one run earth wire and one run PVC Conduit will be measured as one length.
182	M&L for submain wiring with two single core 4.0 sqmm PVC insulated unsheathed cable multi-strand copper conductor FRLSH drawn through and including PVC non metallic rigid PVC Conduit with all fittings and fixing accessories on roof, walls, ceiling etc including 1 x 2.5 sqmm PVC insulated FRLSH unsheathed multi strand copper conductor earth wire connecting earth including cutting groove for concealed wiring, making good to disturb surface of wall/floor with cement mortar and finishes to match existing complete all as specified and directed. Note: Two run of single core cable, one run earth wire and one run PVC Conduit will be measured as one length.
183	M&L for submain wiring with two single core 6.0 sqmm PVC insulated unsheathed cable multi-strand copper conductor FRLSH drawn through and including PVC non metallic rigid Conduit conceled with all fittings and fixing accessories on roof, walls, ceiling etc including 1 x 4.0 sqmm PVC insulated FRLSH unsheathed multi strand copper conductor earth wireconnecting earth including cutting groove for concealed wiring, making good to disturb surface of wall/floor with cement mortar and finishes to match existing complete all as specified and directed. Note: Two run of single core cable, one run earth wire and one run PVC Conduit will be measured as one length.
184	Supply & Fix LED betten plastic type fitting of capacity 20W, operating on 230V, 50Hz, AC Supply having luminous efficacy of not less than 125 lumens/watts, CCT 6500K, P.F>0.9, 2.5 KV surge protection, 4-feet long, housing made out of extruded alluminium with decorative end caps elegently designed complete all as specified.
185	Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed..
186	S&F LED decorative light fitting made up of Polycarbonate, suitable for 9W LED lamp B22 base, classic wall light suitable for living /bed room, antique surface, sleek, of aproved design with 9W LED lamp and connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. Cat No: LHDL06160099 of Havells or equivalent as per approved make list.
187	S&F wall mounted, compact LED batten 20 watt including LED tube rod and connecting with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directedMake : Crompton Cat No- LDLL20-WW or equivalent as per approved make list.
188	S&F bldg security light, LEDluminaire 30 watt made up of pressure die cast alluminium body with mid power LED as lighting sources and PC cover having Top opening separate driver compartment with IP66 protection and impact resistance of IK07 including fixing arrangements completeall as per directed by Engr- in – charge. Make - Crompton Cat No LSTS-25-CDL/NL-M or equivalent as approved list of make
189	S&F bldg security light, LEDluminaire 25 watt IP 66 LED lamp, made up of pressure die cast alluminium body with mid power LED as lighting sources and PC cover having Top opening separate driver compartment with IP66 protection and impact resistance of IK07 including fixing arrangements and taking down old rusted bracket fittings completeall as per directed by Engr- in – charge. Make : Crompton Cat No- TRP-415-25-57-SL-LM-NBK or equivalent as per approved make list.
190	S&F LED bulb 9 watt, 5 star rated and connecting to lamp holder complete all as specified and directed.Make - Crompton Cat No B22/E27-CDL/WW or equivalent as approved list of make
191	S&f Angle bracket 40mm dia for fixing building security light of 40mm dia of 1 mtr long bent to shape 45 degree for fixing of security light including MS clamps of suitable size including nuts, bolts complete all as specified and directed
192	S&F plastic body exhaust fan300 mm sweep complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding and connecting to ceiling rose with flexible copper cable including making holes on the wall and making good to the disturbed surfaces complete all as specified and as directed.
193	S&F BLDC ceiling fan 1200mm sweep complete with blades, down rods, electronic regulator and accessories, 230 V, min air delivery 210 CFM with service value 6.00 BEE 5 star rated & provn of ‘S’ type fan hook complete all as specified and directed.
194	Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection pipe etc complete all as specified and as directed.
195	S&F metal plug socket with MCB SP 20 Amp, 240 V enclosure for AC/equipment with neutral and earth point complete all as specified and directed.
196	S&F sheet metal enclosure powder coated three phase and neutral DB for fixing of MCBs, 4 way double door with bus bar 200 Amps includinggrouting on the wall by means of screws and rawal plugs and making good disturbed surfaces complete all as specified and directed.
197	S&F sheet metal enclosure powder coated single phase DB for fixing of MCBs, 8 way double door with bus bar 200 Amps includinggrouting on the wall by means of screws and rawal plugs and making good disturbed surfaces complete all as specified and directed.
198	S&F sheet metal enclosure powder coated single phase DB for fixing of MCBs, 4 way double door with bus bar 200 Amp includinggrouting on the wall by means of screws and rawal plugs and making good disturbed surfaces complete all as specified and directed.
199	S&F MCB TPN of capacity 63 Amps ,240 V, 10 KA \"B\" curve complete all as specified and directed.
200	S&F MCB SPN of capacity 40-63 Amps,240 V, 10 KA \"C\" curve complete all as specified and directed.
201	S&F MCB SP of capacity 5-32 Amps,240 V, 10 KA \"C\" curve complete all as specified and directed.
202	M&L for earthing with galvanised steel earth plate electrode 600mmX600mmX6mm thick burried directly in ground (earth pit not less than 2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below ground level connected to 4mm dia GI wire protected by 20 mm bore light grade galvanised iron pipe and other end connected to test point as directed including funnel with wire mesh and watering pipe 20 mm bore medium grade galvanised iron pipe with charcoal and common salt in alternaterlayers of 15 cm thickness all around the GI plate electrode with concrete pit in PCC 1:3:6 type C-1 with cast iron frame including cast iron cover 10mm thick hinged to CI frame and 6mm MS rod for handle, necessary excavation and earth wok in hard/dense soil and disposal of spoil to a distance n exc 50 m and necessary testing complete all as shown in electrical plate No 3 of SSR part-I complete all as specified and directed.
203	Supply, fixing, commissioning & testing of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, Electric power cable (heavy duty) with aluminium conductors, 1100 volts, grade cross sectional area 25 sqmm 3.5 core laid in trenches/fixed to wall/under road/pipe etc with copper cable glands & copper thimbles complete all as specified and directed.
204	Supply, fixing, commissioning & testing of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, Electric power cable (heavy duty) with aluminium conductors, 1100 volts, grade cross sectional area 10 sqmm 3 core laid in trenches/fixed to wall/under road/pipe etc with copper cable glands & copper thimbles complete all as specified and directed.
205	Supply, fixing, commissioning & testing of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, Electric power cable (heavy duty) with aluminium conductors, 1100 volts, grade cross sectional area 06 sqmm 2 core laid in trenches/fixed to wall/under road/pipe etc with copper cable glands & copper thimbles complete all as specified and directed.
206	Material & labour GI tube light grade 40 mm bore for protection ofcable complete all as specified and directed.
207	Material & labour GI tube light grade 25 mm bore for protection ofcable complete all as specified and directed.
208	M&L for steel water tubing 25mm dia, medium grade galvanised with new fitting laid in trenches or on wall complete all as specified and directed.
209	M&L for steel water tubing 20mm dia, medium grade galvanised with new fitting laid in trenches or on wall complete all as specified and directed.
210	S&F gun metal gate valve 25mm dia, cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe complete all as specified and directed.
211	S&F gun metal gate valve 20mm dia, cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe complete all as specified and directed.
212	M&L 100mm thick PCC 1:3:6 type C2 using 40mm graded crushed stone aggregate for flooring complete all as specified and directed.
213	Excavation in trenches not exceeding 1.50 m wide and n.exc 1.5 m in depth for foundation of poles, cable, pipe etc, not exc 10 sqm on plan and getting out in soft/loose soil including taking out brick protection etc complete all as specified and directed.
214	Returning, filling in trenches incl. spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.
215	Removing of surplus soil to a distance not exceeding 50 meter and deposited where directed at a level not exceeding 1.50 meter above the starting point complete all as specified and directed.
216	M & L for sand cushioning by spreading in trenches crushed sand by gently by punning down manually as in cable protection all as specified and as directed by Engineer -in-charge.
217	M&L for bricks sub-class \"B\" laid in trenches for cable protection complete all as specified and directed.
218	M&L for cutting of existing GI pipe line 25mm dia for inserting Tee and reducer etc for taking 25mm dia branch pipe including fittings complete

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents
5	Click here to download tender document	Tender Documents

Also Visit

Tenders

Assam Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Special Repair To Bldg No T-234 And Certain Revenue And Minor Work At Masimpur Military Station, Masimpur-Assam

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Special Repair To Bldg No T-234 And Certain Revenue And Minor Work At Masimpur Military Station, Masimpur-Assam

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us