|
| 1 | Dismantling Asbestos cement sheet (Corrugated/Semi-corrugated etc.) in roof covering complete all as specified and as directed. |
| 2 | Dismantling single layer mangalore pattern or similar tiles laid dry in roofing. complete all as specified and as directed. |
| 3 | Dismantling timber scantling in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and directed by Engr-in-Charge. |
| 4 | Dismantling timber scantling 40 Sqcm and over in section, in any position |
| 5 | M & L for 2nd class hard wood, clean sawn, in scantiling timber fixed with nails complete all as specified and directed |
| 6 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, etc complete all as specified and as directed. |
| 7 | S&F Rolled mild structuralsteel roof trusses (framed), trussed, purlins,posts, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.conforming to Fe 410-W (Gde-E) complete all as specified and as directed. |
| 8 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing confirming to Fe 410 -W (GdeE- 250) qualityA complete all as specified and as directed |
| 9 | S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment confirming to Fe 410 -W (GdeE- 250)qualityA complete all as specified and as directed. |
| 10 | M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on new or untreated steelsurfaces exc 10 cm in width or girth including preparation complete all as specified and directed. |
| 11 | S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet (Mangalore pattern) 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified etc complete all as specified and as directed. |
| 12 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 13 | Dismantling boarding, any description, fixed in any position with nailscomplete all as specified and directed. |
| 14 | M&L Weather boarding of 2nd class H.W of 20mm to 25mm thick and rebated of thick edge to give 20mm lap and fixed with screws/nails including one coat primer and two coat synthetic enamel paint complete all as specified and directed. |
| 15 | Dismantling wall and ceiling boards (fibre, pulp, insulation,etc.) or insulation boards/ slabs/ blankets any thickness, incl cover filltets and grids and S&F for true horizontal level 600x600mm panels false ceiling system using hot dipped galavnized steel sections exposed surface with pre-coated capping, Main Tee of size 24x32mm at every 1200mm c/c maximum, rotary stitched cross Tee of size 24x 27mm at every 1200mm c/c and wall angle of size 19x19mm fixed to perimetre wall. The complete grid is to be suspended at every 1200mm c/c in both directions by using 2mm dia pre straightened GI wire at every 1200mm interval at the main Tee using fine finished tagular edge including8-9 mm thick Gypsum boards of size 600x600 mm with rear side Aluminium fril and front side PVC lamination complete all as specified and as directed. |
| 16 | Cutting out V - grooves in plaster / masonary and inserting the waterproffing membrane and making good in CM 1:3 complete all as specified and directed. |
| 17 | M&L 10mm thick rendering in cement mortar1:3 with WPC @ 3% on fair faces of brick or concrete surface,etc complete all as specified and directed . (WPC will be paid separately) |
| 18 | M&L APP based polymeric membrane minimum Weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified. |
| 19 | M&L 50mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in sunken flooring (top) complete all as specifed and directed. |
| 20 | M&L for Type E2 1:5:10 (Using 40 mm graded stone aggregate) in foundations, filling and mass concrete (sunken floor filling) |
| 21 | M&L for PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in roof padding finished even and smooth using extra cementwith WPC complete all as specified and directed.(NOTE : Supply of WPC will be paid under the respective Item) |
| 22 | M&L for APP based polymeric membrane minimum weighing 3Kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/sqm laid over primed surface including bitumnious primer conforming to IS -3384 applied @ 0.3 ltrs/sqm by forced application over finished with one coat of aluminium paint @ 100 ml/Sqm, 10 cm overlap fused uniformly by LPG torch flame, including rendering 10mm thick in cm 1:4 on concrete surfaces of roofs, parapet etc. finishing to surfaces even and smooth without using extra cement and provinding necessary slope with using WPC @ 3% by weight ofcement completeincl taking down existing froof treatment and cement plaster of any description, roughing, preparing the surface by cleaning the surface with wire brushingscrubbinbg down with water to receive new treatment complete all as specified and directed. |
| 23 | Taking up or down dia bore pipes in 15 mm, steel tubing and connections, including cleaning for refixing or removal to store etc completed all as specified and directed. |
| 24 | M&L for Cutting chases in brick wall, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 10 cm but not exc 20cm girth complete. |
| 25 | Supplying and laying of 16mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 26 | Taking up or down 20 mm dia bore pipes steel tubing and connections, including cleaning for refixing or removal to store etc completed all as specified and directed. |
| 27 | Supplying and laying of 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 28 | Demolition of Concrete of any description and in any position not otherwise specifically provided for, cement concrete (reinforced), etc complete all as spd and directed. |
| 29 | M&L for Reinforced cement concteteType B1, 1:2:4 (20mm graded stone aggregate) in slabs supported on walls, beams, landings, balconies, canopies, deck slabs and, shelves and similar works etc complete all as specified and directed. |
| 30 | M&L for Reinforced cement concteteType B1, 1:2:4 (20mm graded stone aggregate) in chajjas complete all as specified and directed. |
| 31 | M&L for Reinforced cement concteteType B1, 1:2:4 (20mm graded stone aggregate) in Beams, cantilevers, bressummers and lintels complete all as specified and directed. |
| 32 | Formwork to soffits of suspended slabs of thickness not exceeding 200mm such as roof slabs, floor slabs, landings and similar work as flatfinishing to fair finished surface of concrete complete all as specified and directed. |
| 33 | Formwork to small surfaces such as cantilever ends, brackets, ends of steps, caps and bases of pilasters and the columns and the likefinishing to fair finished surface of concrete complete all as specified and directed. |
| 34 | M&L for mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, inlcuding cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 35 | Demolition of cement concrete in ground floor and paving not exc 15cm thickness (below or above ground floor) complete all as directed. |
| 36 | M & L treating the soil along with the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron., etc complete all as specified and directed. |
| 37 | M & L 25 mm thick PCC 1:2:4 Type B0 (using 12.5 mm graded stone aggregate)in sub bases, floors and pavings etc., complete all as specified and directed. |
| 38 | M&L 75mm thick plain cement concrete 1 : 3 : 6 mix type C2 (using 40mm graded stone aggregate) finished even and smooth with out using extra cement including necessary form work. complete all as specified and directed. |
| 39 | Dismantling floor, hearth or wall tiling incl cement mortar bedding, backing and rubbish off the premises. complete all as specified and directed. |
| 40 | M&L for Non skid coloured ceramic tiles 7 to 8mm thick area of each tile exceeding 0.06 sqm, but n exc. 0.11 sqm, in floor etc. set and jointed in net cement slurry & pointed in white or colouredcement to match over 15mm thick Screed bed or bedding layer for laying floor finishes in CM 1:6 complete all as specified and directed. |
| 41 | M&Lnon skid coloured ceramic floor tiles 7-8 mm thick (square/ rectanglar ) area of each tile exc 0.11 sqm but n\"exc 0.18 sqm , set and jointed in neat cement slurry and pointed with white or coloured cement to match ver 15mm thick Screed bed or bedding layer for laying floor finishes in CM 1:6 complete all as specified and directed. |
| 42 | M&L glazedceramic coloured tiles invertical surface 450 x 300 x 7mm-8mm thickset and and jointed in cement slurry and pointed with white or coloured cement to match incl. Rendering 10mm thick backing coat in CM 1:4 on fair faces of brick work or concrete surface complete all as specified and directed. |
| 43 | Dismantling of stone slab and tiles of any description or thickness in floors, approns laid , bedded and pointed any mortar complete all as specified and directed. |
| 44 | M & L Granite (of any type) work (table rubbed and polished) 20 mm thickin steps, jambs, pillars, window-cills, cooking platforms,over 15 mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, etccomplete all as specified and directed. |
| 45 | M&L chequered cement concrete, colouredtiles,textured finished of size 250 x 250 x 22 mm/300 x 300 x 22 mm thickset jointed in neat cement slurry and pointed with white cement and pigment in floors to match with colour of tiles, including 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 46 | M & L for 20-25 mm thick, Machine cut kota stone slab flooringover 20 mm thick cement screed bed in cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including mirror polishing (with deep cleaning, Grinding and Honing, Slurry Filling, Polishing/Crystallization and Sealing) complete all as specified and as directed. |
| 47 | M & L for 20-25 mm thick Kota stone slab over 15 mm thick rendering in cement mortar 1:3 as in backing coat in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including mirror polishing complete all as specified and as directed. |
| 48 | Demolition of brick work or stone/boulder masonry, built in cement mortar. complete all as specified and directed. |
| 49 | M&L for Brickwork with fly ash bricks, old size one brickstraight or curved on plan exc 6m mean radius, built in CM 1: 6 complete all as specified and directed. |
| 50 | M&L for cleaning/removing all vegitation, bushes/small trees on vertical side of wall/chhaja/slab of building and making good the surfaces with PCC 1:2:4 type B-0 (12.5mm graded stone aggregate) or rendering in CM (1:3) including removing spoils obtained to a distance not exc 50 metre and depositing complete all as specified and directed. |
| 51 | Taking down cement or cement lime plaster on brick or stone walls/ceiling including raking out joints, hacking for keys, scrubbing down with water etc. |
| 52 | M&L Rendering, 10mm thick, in CM (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 53 | M&L Rendering, 15mm thick , in CM (1:4) mixed with water proofing compound as per manufacturer instruction on fair surfaces of brick or concrete walls, finished even and smooth without using extra cement including taking down existing plastering of any description all as specified and as directed.Note: WPC shall be measured and paid separately. |
| 54 | Supply only liquid water proofing compound of approved make complete all as specified and directed. |
| 55 | M&L 5 mm thick plastering in CM 1:3 finished even and smooth w/o using extra cement on concrete surface of ceilings. complete all as specified and directed. |
| 56 | M&L forpreparation of new plastered surfaces of walls andapplying two coats of oil bound distemper over a coat of alkali-resiatant primer and 1.5 mm thick Birla wall care putty on plastered surrfaces complete all as specified. |
| 57 | M&L for preparation of newly plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer on wall surfaces complete all as specified and directed. |
| 58 | M & L preparation of newsurfaces of ceiling plastered or unplasteredand applying three coat of white wash to obtain uniform surfaces complete all as specified and directed. |
| 59 | M & L for complete removal of existing treatment and applying 1.5mm thick birla white wall care putty to fill up the depression and rubbing with sand paper to achieve a levelled and smooth surface and applying two coats of oil bound distemper over a coat of alkali resistant primer on prepared surfaces of internal walls complete all as specified and directed. |
| 60 | M & L for complete removal of existing treatment and applying two coats of cement based paint on prepared surfaces of walls complete all as specified and directed by Engineer-In-Charge. |
| 61 | M & L preparation of old decorated surfaces of ceiling plastered or unplastered including removing by brooming down all dust, dirt and all loose scales by steel wire brushing, scrapping down smoke, soots, moulds, moss and efflorescent salts and trading oiland greasy spots etcand applying two coats of OBD on ceiling, white or tinted comlpete all as specified and directed by Engineer-In-Charge. |
| 62 | Taking down chowkats or frames with shutters (without taking off shutter from the frames)n exc. 1.5 sqmeach and removing to or from store. complete all as specified and directed. |
| 63 | Taking down chowkats or frames with shutters (without taking off shutter from the frames)exc. 1.5 sqm but n exc 4.00 eachand removing to or from store. complete all as specified and directed. |
| 64 | M&L for cement concrete 1:2:4 type BI using 20mm graded stone aggregate in bed block for hold fasts and coping incl necessary form work weathering slighly rounded or chamfered angles and treating and making good the disturbed portion complete all as specified and directed. |
| 65 | M&L 2nd class hard wood plain straight solid chowkats and frames wrought, framed, rounded, chamfered put together with glue pinned joints and making good the surfaces complete all as specified and directed. |
| 66 | M&L 2nd class hard wood plain framedpanel shutter 35 mm thick (two or three panels) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces, the size of rail & style as per IS 1003 (Part-I) Kiln seasoned and chemically pressure treated. complete all as specified and directed. |
| 67 | S&F 35 mm thick IInd class hard wood glazed and skelton shutters sizes of members as specified in SSR(Part-I) clause 8.20(a), open rebated and prepared to receive glass or gauge (without sash bars ) edges of framing plain, chamfered or rounded, fitted with cut and miterd beads for securing glass or gauge etc. complete all as specified as directed by Engr-in- charge. |
| 68 | S&F Double Rebate windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 47mm x 20mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills, fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap, Glazed Shutter section cut to length and mitre joint with corner bracket having lipping to cover the corners.Elixir, NCL or equivalent stay, handles, 2nos of heavy duty stain less steel pivot hinges, 2no’s towerbolts shall be provided per shutter. The windows should be paneled with 4mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws. Including 10mm square guard bars with 6” (152.4mm) pitch, for finished item of work.complete all as specified and directed.. |
| 69 | Supplying and fixing of Fixed Louvered Ventilators made of pre - painted steel (base steel as per IS 513 of -0.58 mm thick \"D\" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, The section for louvered ventilators should be of 33 x 56 mm Box section panelled with 4 mm pinhead glass with Ethyl propylene Diamine monomer Gasket (EPDM) and the sections cut to length mitre joined with corner bracket . Corner brackets made of CRCA with Zinc Phosphate. The frames to be fixed to the concrete/masonry wall by means of self expanding screws including 10 mm square guard bars with 6\" pitch complete for finished item of work.(Make : NCL / ELIXIR METFORM PVT LTD or Equivalent) |
| 70 | S&F PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suppling fixing in opening etc.complete all as specified and directed. |
| 71 | M & L factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tube for top and bottom rails.MS frame shall be covered with heat molded plain colour PVC “C” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing at site as per specification and drawing complete all as specified and directed. |
| 72 | S&F 100 MM Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type B-21. complete all as specified and directed. |
| 73 | S & F200 mm sizeAluminium anodised,barrel tower bolts of extruded section and fixed,etc complete all as specified and directed.. |
| 74 | S & F 150 mm length of extruded aluminium alloy handles, fabricated type., anodised complete all as specified and directed.. |
| 75 | S & F 300mm long Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed. |
| 76 | S & F in repairs 300mm, ordinary Mild steel rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 77 | S & F 150 mm length of aluminium anodised barrel tower bolts of extruded section and fixed. complete all as specified and directed. |
| 78 | S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of apreture 1.4 mm & fixed with stainless steel wire staples fixed. complete all as specified and directed. |
| 79 | S&F 18 mm Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. |
| 80 | S & F Continuous (piano) hinges,mild steel, bright finish or electro galvanised,Width of flaps (when open) in 30 mm etc complete all as specified and directed.. |
| 81 | S & F Extruded aluminium alloy handles, 75mm size fabricated type,anodised, complete all as specified and directed.. |
| 82 | M&L 2nd class hardwood exc 13 & n exc 25 sqcm Plain fillets. square, rectangular or triangular in section, clean sawn, se cured with nails or brads complete all as specified and directed. |
| 83 | M&L preparation of new surfaces of wood or wood based material description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.. |
| 84 | S&F in repair 140 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and directed. |
| 85 | M&L Harrison rails, anodised alluminium alloy with fixing brackets, stops, rollers etccomplete all as specified and directed. |
| 86 | Disconnecting existing tanks of capacity exc 250 & n exc 500, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) complete all as specified and directed. |
| 87 | Dismantling PVC water tanks of capacity 500 ltr and removing to store complete all as specified and directed. |
| 88 | Dismantling PVC water tanks of capacity 1000 ltr and removing to store complete all as specified and directed. |
| 89 | S&F Rotational moulded polyethylene water storage tanks (cylindricalvertical with closed top ) of 500 ltr capacity triple layer hoisted and fixed in position complete all as specified and directed. . |
| 90 | S&F Rotational moulded polyethylene water storage tanks (cylindricalvertical with closed top ) of 1000 ltr capacity triple layer hoisted and fixed in position complete all as specified and directed. |
| 91 | S & F Vitreous China wash basin, white, flat back, size 630x450mmincluding cutting for & pinning in ends of brackets or erracting stand but exclusive of fixing of supply of waste pipe fixed in repairs. |
| 92 | S&F in repair PVC valveless syphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and32mm PVC flush pipe. |
| 93 | S & F in repair Vitreous china premium/ 1st quality wash down water closet EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect all as specified and directed |
| 94 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed. |
| 95 | Supply and fixed in repair 15 mm bore Bib taps cost copper alloy Chromium plated with fancy type single lever, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 96 | S&F in repair 15 mm dia Stop valves, cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unionwith long shank and complete all as specified and directed. |
| 97 | S&F in repair 15 mm dia Stop valves, fancy type, chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unionwith long shank complete all as specified and directed. |
| 98 | S&F CPVC ball valves, with CPVC lever, screwed both ends to pipes of 20mm bore fixed complete all as specified and directed. |
| 99 | S & F in repair 20mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 100 | S&F in repair PVC connection 15mm dia, 45 Cms long with brass ferrules on both endscomplete all as specified and directed. |
| 101 | S & F in repair 32mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement & other end complete all as specified and directed. |
| 102 | S & F in repair 40mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement & other end complete all as specified and directed. |
| 103 | S& F Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls,ceilings or in floors as waste pipe etc.,, Bore of pipes in 32mm, etc complete all as specified and directed. |
| 104 | S & F in respect 15mm bore fancy type single lever Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot\" or ‘Cold\" with long screwed shanks and fly-nuts, swan pipe, screwed for iron pipe complete all as specified and directed. |
| 105 | S&F in repairs 600mm x 450mm beveled edge mirror of selected quality glass 5.5mm thick, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 106 | S&F in repairs bath room cabinet ofPVC size 450x350mm with mirror complete all as specified and directed. |
| 107 | S&F Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes coupling, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, etc complete all as specifed and directed. |
| 108 | Supply & Fix in repair stainless steel kitchen plate rack ( non magnetic type ) made of 0.85 mm thickness sheet of size 31\"\" x 36\"\" x 10\"\" complete all as specified and directed. |
| 109 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement |
| 110 | S&F towel rail 600 mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190 gms) |
| 111 | S&F in repair15 mm dia Brass chromium plated shower rose 125mmsize fixed complete all as specified and directed. |
| 112 | Dismantling of cast iron/AC/PVC pipes100/110mm dia, jointed in cement mortar and taking out of trenches if requiredcomplete all as specified and directed. |
| 113 | Dismantling of cast iron/AC/PVC pipes 75 mm dia, jointed in cement mortar and taking out of trenches if required |
| 114 | S & F for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, bore of pipe in 110 mm, etc complete all as specifed and directed. |
| 115 | M & L for Cement Concrete 1:3:6 type C-2 as concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 100 mm dia SWG pipe. |
| 116 | S & F for PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls. (At any height of building, till 4 floors also), bore of pipe in 110 mm, etc complete all as specifed and directed. |
| 117 | S & F for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, bore of pipe in 75 mm, etc complete all as specifed and directed. |
| 118 | S & F for PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall. (At any height of building, till 4 floors also), bore of pipe in 75 mm, etc complete all as specifed and directed. |
| 119 | M&L 110 mm bore PVC( SWR ) bend with oval access doors, incl taking down. complete all as specified and directed. |
| 120 | M&L 75 mm bore PVC( SWR ) bend with oval access doors, incl taking down complete all as specified and directed. |
| 121 | S & F PVC (SWR) vent cowl, bore of pipe in 110 mm, etc complete all as specifed and directed. |
| 122 | S&F PVC (SWR)bends (size of bore 110mm) complete all as specified and directed. |
| 123 | S& F PVC (SWR) floor trap, plain with grating including jointing with solvent cement, diameter of outlet in 75 mm, etc complete all as specifed and directed. |
| 124 | S & F in respect salt glazed stone ware gully traps square or rounded mouthed tape & fix 150 x 150 mm fixed in cement concrete complete all as specified and directed. |
| 125 | S & F for Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms), etc complete all as specifed and directed. |
| 126 | Excavation in trenches n.exc 1.50m wide and n.exc. 1.50 m depth and getting out in hard/dense soil. |
| 127 | Returning, filling in incl spreading, leveling, watering and well ramming in layers n. exc 25 cm all as specified. |
| 128 | Removing excavated materials n\"exc 50 mtr and depositing where directed at a level n. exc 1.5 mtr above the starting point in soils. |
| 129 | Takingout carefully copper/aluminium point wiring,Light,fan, bell,socket or powercomplete with all fitting, fixtures such as switch socket out let, ceiling rose ,holder ,regulator,DBs, refixing of fans etc including making good the disturbed surface of wall/floors complete all as specified and directed. |
| 130 | Taking downexisting sub main wiring / service wire of any description and size including earth wire, batten, conduits and making good the disturbed surfaces ofwalls, floors etc. |
| 131 | M & L for providing point wiring with 1.5 sq. mm (nominal area) single core PVC insulated FRLS unsheathed multi-stranded copper conductor cable (maintaining colour code), 1100 volts grade in and includingnon metalic rigid PVC conduit medium grade with appropriate size with all fittings (ISI Marked) suitable for concealed/ surface wiringon stone/brick, masonary walls, roof etcincluding modular sunken box of adequate size with suitable modular plate cover for mounting modular switches, sockets, regulators, light fittings etc. complete with all fittings and accessories fixed to wall/ ceiling for one light/ fan /bell point controlled by one oneway modular switches including one run 1.5 sqmm (nominal area) PVC insulated FRLS unsheathed multi-stranded copper conductor cable green in colour for earth continuity conductor connected to common earth dolly including making good the disturbed surfaces to match with the existing specification, complete all as specified & directed at site for one light controlled by one switch. |
| 132 | All as per Sl item No 132 above but for one ceiling fan controlled by one switch & regulator. |
| 133 | All as per Sl item No 132 above but for one exhaust fan controlled by one switch. |
| 134 | All as per Sl item No 132 above but for one bell controlled by one switch. |
| 135 | All as per Sl item No 132 above but for one 3 pin socket 6 Amp on independent board. |
| 136 | All as per Sl item No 132 above but for one 3 pin socket 6 Amp on same board. |
| 137 | All as per item No. 132 but for One 3 pin 15 Amps switch socket outlet point on independent board with 4.0 sqmmPVC (FRLS) insulatedunsheathed single core multi standed copper conductor all as specified and directed. |
| 138 | Supply and fix Modular switch, single pole, one way, 6Amps one module complete all as specified anddirected. |
| 139 | Supply and fix modular bell push 6 Amps 1 module complete all as specified and as directed. |
| 140 | Supply and fix Modular 6A 3 pin universal socket outlet, 2 module complete all as specified anddirected. |
| 141 | Supply and fix Modular switch, single pole, one way, 16Amps one module complete all as specified and as directed. |
| 142 | Supply and fixModular socket outlet 2-in-1, 6/16 Amps, 2 module complete all as specified and as directed. |
| 143 | Supply and fix Ceiling rose surface bakelite three terminal / PVC / Polycarbonate / isolated body65x50 mm, terminals 240 volts complete, all as specified and directed. |
| 144 | Supply and fixlamp holder insulated body with back plate complete all as specified and directed. |
| 145 | Supply and fix modular stepped type electronic fan regulator 220 volts, 100Wattcomplete all as specified and as directed. |
| 146 | Supply and fixBell electronic 230 volt, AC single pole complete all as specified and directed. |
| 147 | S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. |
| 148 | Supply and fix 20W,decorative, wall mounted, ultra slim, LED lighting fixture size (1224x 43x58)mm, 6500K with high lumen output, environmental friendly, energy efficient with electronic driver complete with all fixing arrangement including connection with twin twisted unsheathed PVC copper cable of suitable size etc, complete all as specified and as directed. Makes : Cat Nos. STOUTMINI1200BS20WLED 865SPCWH of HAVELLS / BN100CLED20S-6500PSUL 120GRS4 of PHILIPS / WIPRO. |
| 149 | Supply and fix 10W,decorative, wall mounted, ultra slim, aluminim housing LED lighting fixture size (550x 23x37)mm,high lumen output, environmental friendly, energy efficient with electronic driver complete with all fixing arrangement including connection with twin twisted unsheathed PVC copper cable of suitable size complete all as specified and as directed.Makes : Cat Nos- LUMILINE PLUSNEOBS10WLED865SPCSSINDS of havells/ LL20-111-XXX-65NE10W of WIPRO/ CCS103 1065SLDPNWH 10Wof CROMPTON. |
| 150 | Supply and fixing LED BLDG Security Light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection including connection with twin twisted unsheathed PVC copper cable of suitable size alongwith suitable brackets with clamps, nuts and bolts complete all as specified and directed.Cat Nos. ENDURASUNDOWNSL35LED765PASYBOPC of HAVELLS/ BRPO30PLED35CWSCRGRPSUSPD of PHILIPS / LRO2-391-XXX-57-XX35W of WIPRO. |
| 151 | S&F in repair Factory made SPN 8 ways distribution board in sheet steel enclosure double door with suitable ratedbus bar, 240 Volts suitable for housing RCBO SPN MCBs as incomer and SP MCBsas outgoing complete all as specified and as directed. |
| 152 | All as per Item No.152 but double door 4 ways DB, complete all as specified and directed. |
| 153 | All as per Item No.152 but double door 12 ways DB, complete all as specified and directed. |
| 154 | S&F in repair 240V, 10 KA \"C\" curve MCB of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed at site. |
| 155 | Supply and fix RCBOs SPN 40 to 60 Amps, 240 volts 50Hz AC supply,in the MCB DB Complete with connection testing and commissioning complete all specified and directed. |
| 156 | M&L for Submain wiring with two single core PVC (FRLS) insulated flexible copper conductor cable of size 6 Sqmm and one single core PVC (FRLS) insulated unsheathed flexible copper conductor cable green colour of size 6.0 Sqmm as earth lead in and including PVC conduit medium grade/casing caping with all fittings suitable for concealed/surface type and making good the disturbed wall surfaces to match with existing specification all as required at site complete all as specified and directed at site.Note :- 3 runs of 6.00 Sqmm cable and PVC conduit will be measured as 1 Unit |
| 157 | Material and Labour for Earthing complete with galvanized steel earth plate electrode 60cmX60cmX6mm thick, buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of plate not less\" than 1.5meters below normal ground level, earth plate connected to galvanized earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES SSR-2009 (part I Specifications) connected to earth test point all as specified or indicated including testing on completion, including necessary excavation and earth work in any type of soil and adequate quantity of common salt & charcoal for alternate layer around the earth plate, including PCC (1:2:4) earth pit and 10mm thick C.I. cover with arrangement of hinge to 40x40x6mm C.I. angle iron frame, including 20mm dia G.I. pipe medium grade for watering purpose with the arrangement of funel and wire mess, including GI pipe of 15 dia medium grade for earth lead protection complete all as specified and as directed. |
| 158 | S&Felectric water heater, storage type Feroglas coated inner container, Mcoloy glass cotead Heating Element provide Whirl flow technowlogy, Heavy duty protective anode rod with porcelain enamel inner tank and heating element upto 2 KW capacity of 25 litre, 8 Bar BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc., and 04 No\"s grouting bolts, nuts & washers grouted on stone wall and making good the distributed groute surface complete all as specified and directed at site. Make : Velora Pro of Havells / Bajaj / CG |
| 159 | Supply and fix exhaust fan 240V, 300mm Sweep, metalic bodyincluding electrical connection complete with all fixing arrangement at siteall as specified and directed. (Note: Cost for cutting suitable holes for exhaust fan and making good the disturbed surfaces shall be deemed to be included the quoted rate.) |
| 160 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25.0 sq mm 2 core all as specified and directed. |
| 161 | Supply and spread approved dry river sand for cushioning of cable including watering and consolidation, laid in trenches complete all as specified and directed. Note:- Punned thickness shall be measured for payment purpose |
| 162 | M&L brick protection with common burnt bricks sub class ‘B’ of size 230 x 113 x 75mm for cable protection complete all as specified and directed. |
| 163 | M & L for cutting of road, hard standing made of concrete or premix carpet, WBM, soiling and morrum filling including excavation for laying of cable/pipe all as directed and making good the road/hard standing by using all old/new materials and with PCC (1:2;4) etc, required to match with the existing surface complete all as specified and directed. |
| 164 | Supply and lay GI tube light grade50 mm bore, ISI marked with all fittings, complete, fixed to walls, pole ceiling or laid in trenches/floor for cable protection at road crossing/ on poles etc including Takingout complete all as specified and directed. |
