|
| 1 | Dismantling Asbestos cement sheet (Corrugated/Semi-corrugated etc.) in roof covering complete all as specified and as directed. |
| 2 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, etc complete all as specified and as directed. |
| 3 | S&F Rolled mild structuralsteel roof trusses (framed), trussed, purlins,posts, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.conforming to Fe 410-W (Gde-E) complete all as specified and as directed. |
| 4 | M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on new or untreated steelsurfaces exc 10 cm in width or girth including preparation complete all as specified and directed. |
| 5 | S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet (Mangalore pattern) 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified etc complete all as specified and as directed. |
| 6 | Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horixontal face of groove with cement mortar 1:3 (for water proofing). |
| 7 | Providing and fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum ) False ceiling tiles of size 595 x 595 mm of approved texture, with semiperforated 12mm thick microtegular edged GRG false ceiling. Design and patterns having moisture contents less than 2% humidity resistance of 99% NRCO.50 to .75 as pe IS8225:1987, Noncombustible as per BS 476 (Part 4)-1970 and light reflectance of 85% (Minimum) to be laid in true horizontal level suspended on interlocking metal T Grid of hot dipped galvanized iron section of 0.33 mm thick ( galvanised @ 120 gms per sqm including both sides ) comprising of main T runners of size 15 x 32 mm of length 3000mm, cross -T of size 15 x 32 mm of length 600mm to form grid module of size 600 x 600mm, suspened from ceiling using galvaized mild steel items ( galvanizing @ 80 grams per sqm) i..e 50mm long, 8mm outer diameter M-6 dash fastener 6mm dia fully threaded hanger rod upto 1000mm length and L-swhape level adjuster of size 85x25 x 2mm galvanised iron permieter wall angle of size 24 x 24 x 0.40mm of length 3000mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450 mm ceneter to centre and 50mm long dry wall wood screws icluding Dismantlig of False ceilig ay type. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-charge. |
| 8 | M&L for 10 mm thick rendering in CM 1:3 with water proofing compound @ 200 ml per cement bag of 50 Kg each all as per manufacturers instructionon fair faces of brick work or concrete surface finished even & smooth without using extra cement (Note : Water proofing liquid to be paid seprately) complete all as specified and directed by Engr-in-Charge. |
| 9 | Supply only Integral Liquid Water Proofing Compound conforming to IS:2645-2003 completeall as specified and as directed. |
| 10 | M & L for PCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in roof padding of thickness n. exc., 40 mm complete all as specified and directed. |
| 11 | M&L for APP based polymeric membrane minimum weighing3.00 Kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric (wt not less than 150gms/Sqm) laid over primed surfaceincluding bitumnious primer conforming to IS-3384 applied @ 0.3 ltrs/Sqm by forced application and finished with one coat of aluminium paint @ 100ml/Sqm, 10 cm overlap fused uniformly by LPG torch flame, including taking down existing roof treatment and cement plaster of any description, roughing preparing the surface by cleaning the surface with wire brushing scrubbinbg down with water to receive new treatment complete all as specified and directed. |
| 12 | Demolition of Concrete of any description and in any position not otherwise specifically provided for, cement concrete (reinforced), etc complete all as spd and directed. |
| 13 | Taking up or down 15 mm, dia pipe steel tubing and connections, including cleaning for refixing or removal to store etc complete all as specified and as directed. |
| 14 | S&F 15 mm dia GI, Tubes, \"medium grade\", galvanised, with all fitting; laid in trenches, etc complete all as specified and directed by Engr-in-Charge. |
| 15 | Taking up or down 20 mm dia pipe, steel tubing and connections, including cleaning for refixing or removal to store etc complete all as specified and directed. |
| 16 | S & F 20 mm dia GI, Tubes, \"medium grade\", galvanised, with all fitting; laid in trenches, etc complete all as specified and directed by Engr-in-Charge. |
| 17 | S&F Rotational moulded polyethylene water storage tanks (cylindricalvertical with closed top )of 500 ltr capacity triple layer hoisted and fixed in position incl Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed,Bore of pipe in 20 mm, etccomplete all as specified and as directed. |
| 18 | Dismantling water tanks exc 250 & n exc 500 and removing to store,etc complete all as specified and directed by Engr-in-Charge. |
| 19 | S&F 15mm bore Stop valves (angle cock), cast copper alloy, fancy type, chromium plated screwed down, high pressure, screwed both ends for iron pipe or for unions and fixedcomplete all as specified and as directed. |
| 20 | S & F in repair Vitreous China wash down water closet pan(pedestal pattern) white ( including \"P\" or \"S\" trap connection to drain) or out going pipe and to flushing pipe anti shyfonic pipecomplete all as specified and directed. |
| 21 | Supply and fixedin repairs PVC valveless syphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and32mm PVC flush pipe complete all as specified and as directed. |
| 22 | Supply and fix wash hand basinVitreous china white flat back size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and as directed. |
| 23 | Supply and fix 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot\" or ‘Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. |
| 24 | S & F 32mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engr-in-Charge. |
| 25 | Supply and fix 20mm bore gunmetal, globe orgate valves, with iron wheel head, screwed both ends for iron pipe ad fixedcomplete all as specified. |
| 26 | Supply and fix in repair 15 mm bore two way Bib taps fancy type cast copper alloy Chromium plated, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 27 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 28 | M & L for Mirror polished 20-25 mm thick machine cut kota stone flooring laid over 20mm thick cement screed in CM 1:6 joint in grey cement slurry complete all as specified and directed by Engr-in-Charge. |
| 29 | M & L Machine cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 10mm thick rendering in CM 1:4 screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc completed all as specified. |
| 30 | M&L for non skid coloured ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc, and cement screed in CM 1:6, 15 mm thick and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 31 | Mirror polishing on marble/ granite/Kota stone/ stoneincluding cutting work where ever required to give high gloss finish complete all as specified |
| 32 | M & L treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors, etc complete all as specified and directed. |
| 33 | M & L treating the soil along with the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron., etc complete all as specified and directed. |
| 34 | M&L for Non skid coloured ceramic tiles 7 to 8mm thick area of each tile exceeding 0.06 sqm, but n exc. 0.11 sqm, in floor etc. set and jointed in net cement slurry & pointed in white or colouredcement to match over 15mm thick Screed bed or bedding layer for laying floor finishes in CM 1:6 complete all as specified and as directed. |
| 35 | M&L glazedceramic coloured tiles invertical surface 450 x 350 x 7mm thickset and and jointed in cement slurry and pointed with white or coloured cement to match incl. Rendering 10mm thick backing coat in CM 1:4 on fair faces of brick work or concrete surface complete all as specified and as directed. |
| 36 | Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed. |
| 37 | Dismantling of stone slab and tiles of any description or thickness in floors, approns laid , bedded and pointed any mortar complete all as specified and directed. |
| 38 | Demolition of PCC in ground floor or pavingof any description n.exc. 15cm thickness (Un re-inforced) below or above GL complete all as specified and directed by Engr-in-Charge. |
| 39 | M & L 75 mm thick PCC 1:4:8 Type D2 (using 40 mm graded stone aggregate)in sub bases, floors and pavings etc.complete all as specified and directed by Engr-in-Charge. |
| 40 | M&L chequered cement concrete, colouredtiles,textured finished of size 250 x 250 x 22 mm/300 x 300 x 22 mm thickset jointed in neat cement slurry and pointed with white cement and pigment in floors to match with colour of tiles, including 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 41 | M&L for Brickwork with sub class ‘B’ bricks, old size one brickstraight or curved on plan exc 6m mean radius, built in CM 1: 6 complete all as specified and as directed. |
| 42 | M&L for cleaning/removing all vegitation, bushes/small trees on vertical side of wall/chaja/slab of building and making good the surfaces with PCC 1:2:4 type B-0 (12.5mm graded stone aggregate) or rendering in CM (1:3) including removing spoils obtained to a distance not exc 50 metre and depositing complete all as specified and directed. |
| 43 | Taking down cement or cement lime plaster on brick or stone walls/ceiling including raking out joints, hacking for keys, scrubbing down with water etc. |
| 44 | M&L Rendering, 10mm thick, in CM (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement including taking down existing plastering of any description complete all as specified and as directed. |
| 45 | M&L Rendering, 15mm thick , in CM (1:4) mixed with water proofing compound as per manufacturer instruction on fair surfaces of brick or concrete walls, finished even and smooth without using extra cement including taking down existing plastering of any description all as specified and as directed.Note: WPC shall be measured and paid separately. |
| 46 | M&L 5 mm thick plastering in CM 1:3 finished even and smooth w/o using extra cement on concrete surface of ceilings complete all as specified and as directed. |
| 47 | M&L forpreparation of new plastered surfaces of walls andapplying two coats of oil bound distemper over a coat of alkali-resistant primer and including 1.5 mm thick Birla wall care putty on plastered surrfaces complete all as specified and as directed. |
| 48 | M&L for preparation of newly plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer on wall surfaces over 1.5mm thick external wall care putty complete all as specified and as directed. |
| 49 | M & L preparation of newsurfaces of ceiling plastered or unplasteredand applying three coat of white wash to obtain uniform surfaces complete all as specified and directed. |
| 50 | M & L for complete removal of existing treatment and applying 1.5mm thick birla white wall care putty to fill up the depression and rubbing with sand paper to achieve a levelled and smooth surface and applying two coats of oil bound distemper over a coat of alkali resistant primer on prepared surfaces of internal walls complete all as specified and directed. |
| 51 | M & L for complete removal of existing treatment and applying two coats of cement based paint on prepared surfaces of walls over 1.5mm external wall care putty complete all as specified and directed by Engineer-In-Charge. |
| 52 | M & L preparation of old decorated surfaces of ceiling plastered or unplastered including removing by brooming down all dust, dirt and all loose scales by steel wire brushing, scrapping down smoke, soots, moulds, moss and efflorescent salts and trading oiland greasy spots etcand applying two coats of OBD on ceiling, white or tinted complete all as specified and directed by Engineer-In-Charge. |
| 53 | M&L preparation of old painted surface of wood and wood based materials of any description not otherwise described over 10 cm. width or girthshall include brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of synthetic enamel painting complete all as specified and directed by Engineer-In-Charge. |
| 54 | M&L preparation of old painted surface of Steel and iron work of any description not otherwise described over 10 cm. width or girthshall include brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-In-Charge. |
| 55 | M & L Granite (of any type) work (table rubbed and polished) 20 mm thickin steps, jambs, pillars, window-cills, cooking platforms and set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite,moulding rounding , etc complete all as specified and as directed. |
| 56 | M & L RCC 1:2:4, type B1 (using 20 mm graded stone aggregate as in pre-cast cover slabs for selps manholes/drains incl necessary form work set in CM 1:4 complete all as specified and as directed. (Reinforcement will be measured & paid separately) |
| 57 | S & F TMT bars 6mm dia and over upto and incl 10mm dia as in reinforcement, including binding with and incl tying with MS wire (annealed) not less than 0.9mm dia complete all as specified and as directed. |
| 58 | M&L for Hardcore (broken stone & boulders) of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and as directed. |
| 59 | Taking down chowkats or frames with shutters (without taking off shutter from the frames)n exc. 1.5 sqmeach and removing to or from store complete all as specified and as directed. |
| 60 | Taking down chowkats or frames with shutters (without taking off shutter from the frames)exc. 1.5 sqm but n exc 4.00 eachand removing to or from store complete all as specified and as directed. |
| 61 | M&L for cement concrete 1:2:4 type BI using 20mm graded stone aggregate in bed block for hold fasts and coping including necessary form work weathering slighly rounded or chamfered angles and treating and making good the disturbed portion complete all as specified and as directed. |
| 62 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 mm x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 63 | S&F of Factory made single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of 35mm sizecomprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 64 | S&F Double Rebate windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 52 x 25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills, fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap, Glazed Shutter section cut to length and mitre joint with corner bracket having lipping to cover the corners.Elixir, NCL or equivalent stay, handles, 2nos of heavy duty stain less steel pivot hinges, 2no’s towerbolts shall be provided per shutter. The windows should be paneled with 4mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws. Including 10mm square guard bars with 6” (152.4mm) pitch, complete for finished item of work complete all as specified and directed.(note : Glass and wiremesh shall be measured and paid separately)(Make : NCL / ELIXIR METFORM PVT LTD or Equivalent) |
| 65 | S&F 100 MM Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type B-21 complete all as specified and as directed. |
| 66 | S & F 200 mm long Aluminium anodised,barrel tower bolts of extruded section and fixed, complete all as specified and as directed. |
| 67 | S & F 150 mm size extruded aluminium alloy handles, fabricated type., anodised complete all as specified and as directed. |
| 68 | S & F 300 mm long for Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed etc complete all as specified and as directed. |
| 69 | S & F in repairs 300 mm, size ordinary Mild steel rat tail rod pattern springs including roller and roller plate complete all as specified and as directed. |
| 70 | S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of apreture 1.4 mm & fixed with stainless steel wire staples fixed complete all as specified and as directed. |
| 71 | S&F 4 mm thick figured glass, pin head type andd glazing with wooden beads or oil putty in square not exc. 0.50 Sqm in each pane complete all as specified and as directed. |
| 72 | M&L for 4 mm thick,Sheet glass,ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane, etc complete all as specified and as directed. |
| 73 | S& F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required:hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165, etc complete all as specified and directed by Engr-in-Charge. |
| 74 | M&L for 2nd Class hardwood plain fillets, square or triangular in section, clean swan, secured with nails or brads, croos sectional area exc 13 Sqcm but Not Exc 25 Sqcm complete all as specified and directed. |
| 75 | S&F for 18 mm Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed. |
| 76 | S & F Continuous (piano) hinges,mild steel, bright finish or electro galvanised,Width of flaps (when open) in 30 mm etc complete all as specified and as directed. |
| 77 | S & F 75mm size Extruded aluminium alloy handles, fabricated type,anodised, etc complete all as specified and directed. |
| 78 | S & F brass 2-levers locks for cupboard, grade I of size 50mm complete all as specified and directed. |
| 79 | S & F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished and brass polished complete all as specified and directed. |
| 80 | S&F fanlight magnetic catch with 14mm catch cast brass and fixed to cupboard shutters complete all as specified and as directed. |
| 81 | S&F600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, etc complete all as specifed and directed. |
| 82 | M&L Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as perapproved pattern using wooden battens,nailed to the under layer including removal of wooden battens, repair to theedges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge |
| 83 | S&F Wire netting of galvanised steel wire 1.40mm dia, 12mm size of nettingfixed with tinned tacks, wall surfaces fixed with ss nails in concrete or brick wallsof wire staples etc complete all as specified and as directed. |
| 84 | Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horixontal face of groove with cement mortar 1:3 (for water proofing) complete all as specified and as directed. |
| 85 | M&L for Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation,etc or for shafts wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in hard/Dense soil complete all as specified and as directed. |
| 86 | M&L for plain cement concrete 1:4:8 type D2 using 40mm graded aggregate as in sub base/foundation filling complete all as specified and directed. |
| 87 | S & F 110 mm bore PVC (SWR) pipe single socketed,in any length with rubber ring joints, laid in trenches or in floors or fixed to wall complete all as specified and as directed. |
| 88 | M & L 110 mm bore PVC( SWR ) bend with oval access doors, including taking down complete all as specified and as directed. |
| 89 | S & F 75 mm bore PVC (SWR) pipe single socketed,in any length with rubber ring joints, laid in trenches or in floors or fixed to wall complete all as specified and as directed. |
| 90 | S & F for PVC (SWR) vent cowl, bore of pipe in 110 mm, etc complete all as specifed and directed. |
| 91 | M&L for 75 mm PVC Nahani/ floor trap plain with grating including jointing wthi solvent cement including removal of existing Nahani/ Floor trap complete all as specified and directed |
| 92 | Cutting into existing manholes for connecting new drains of internal dia of pipe 150mm, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required. |
| 93 | S&F in repairs glazed stone ware gully traps square or rounded mouthed tape & fix 150 x 150 mm fixed in cement concrete complete all as specified and as directed. |
| 94 | S&F in repair ofMS 25 mm dia Drapery curtain rods powder coated decorative type complete all as specified and as directed. |
| 95 | S&F in repair MS fancy powder coated brackets for 25 mm dia drapery curtain rods |
| 96 | Demolition of Brickwork or stone/boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and directed by Engr-in-Charge. |
| 97 | Dismentling fencing wire mesh, any type all as specified and directed. |
| 98 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,watering, and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed. |
| 99 | M&L of Cement Concrete in foundations, filling and mass concrete 1:3:6 type C2 using 40 mm graded stone aggregate as in post hole filling complete all as specified and directed. |
| 100 | S & F for Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc. complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing, Fe 410-W (Gde-E-250) quality-A,etc complete all as spfd and directed. |
| 101 | S&F 5.60mm (over all dia) PVC coated GI chain link fencing having 2.8mm dia and 1.4mm thick PVC coating and size of mesh 60mm x 60mm complete all as specified and directed. |
| 102 | M&L preparation of newsurfaces of Steel and Iron work of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified. |
| 103 | S&F MS Screw bolts hot dip galvanized machine made with hexagonal or squareheads at one end and screwed the other or screwed both ends ,each screwed end to be fitted with washer and one hexagonal or square nut5 to 10mm dia meter of neck exc 5cm but n exc 10cm longall as specified and directed. |
| 104 | M&L Rendering, 15mm thick , in CM (1:4) mixed with water proofing compound as per manufacturer instruction on fair surfaces of brick or concrete walls, finished even and smooth without using extra cement all as specified and as directed.Note: WPC shall be measured and paid separately. |
| 105 | Takingout carefully copper/aluminium point wiring,Light,fan, bell,socket or powercomplete with all fitting, fixtures such as switch socket out let, ceiling rose ,holder ,regulator,DBs, refixing of fans etc including making good the disturbed surface of wall/floors complete all as specified and directed. |
| 106 | Taking downexisting sub main wiring / service wire of any description and size including earth wire, batten, conduits and making good the disturbed surfaces ofwalls, floors etc. |
| 107 | M & L for providing point wiring with 1.5 sq. mm (nominal area) single core PVC insulated FRLS unsheathed multi-stranded copper conductor cable (maintaining colour code), 1100 volts grade in and includingnon metalic rigid PVC conduit medium grade with appropriate size with all fittings (ISI Marked) suitable for surface / concealed wiringin stone/brick, masonary walls, roof etcincluding modular sunken box of adequate size with suitable modular plate cover for mounting modular switches, sockets, regulators, light fittings etc. complete with all fittings and accessories fixed to wall/ ceiling for one light/ fan /bell point controlled by one oneway modular switches including one run 1.5 sqmm (nominal area) PVC insulated FRLS unsheathed multi-stranded copper conductor cable green in colour for earth continuity conductor connected to common earth dolly including making good the disturbed surfaces to match with the existing specification, complete all as specified & directed at site.Note :Cutting/running chases, pinning infor concealed point wiring shall be deemed to be included the quoted rate for:- one light controlled by one switch. |
| 108 | All as per sl item No. 107 above but for one ceiling fan controlled by one switch & regulator. |
| 109 | All as per sl item No. 107 above but for one exhaust fan controlled by one switch. |
| 110 | All as per sl item No. 107 above but for one bell controlled by one switch. |
| 111 | All as per sl item No. 107 above but for one 3 pin socket 6 Amp on independent board. |
| 112 | All as per sl item No. 107 above but for one 3 pin socket 6 Amp on same board. |
| 113 | All as per item No. 107but for One 3 pin 15 Amps switch socket outlet point on independent board with 4.0 sqmmPVC (FRLS) insulatedunsheathed single core multi standed copper conductor all as specified and directed. |
| 114 | Supply and fix Modular switch, single pole, one way, 6Amps one module complete all as specified anddirected. |
| 115 | Supply and fix modular bell push 6 Amps 1 module complete all as specified and as directed. |
| 116 | Supply and fix Modular 6A 3 pin universal socket outlet, 2 module complete all as specified anddirected. |
| 117 | Supply and fix Modular switch, single pole, one way, 16Amps one module complete all as specified and as directed. |
| 118 | Supply and fixModular socket outlet 2-in-1, 6/16 Amps, 2 module complete all as specified and as directed. |
| 119 | Supply and fix Ceiling rose surface bakelite three terminal / PVC / Polycarbonate / isolated body65x50 mm, terminals 240 volts complete, all as specified and directed. |
| 120 | Supply and fixlamp holder insulated body with back plate complete all as specified and directed. |
| 121 | Supply and fix modular stepped type electronic fan regulator 220 volts, 100Wattcomplete all as specified and as directed. |
| 122 | Supply and fixBell electronic 230 volt, AC single pole complete all as specified and directed. |
| 123 | Supply and fix 20W,decorative, wall mounted, ultra slim, LED lighting fixture size (1224x 43x58)mm, 6500K with high lumen output, environmental friendly, energy efficient with electronic driver polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing. white coloured ABS end caps, IP 20 protection, input voltage range 140- 270 V, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixturecomplete with all fixing arrangement etc, complete all as specified and as directed.Makes : Cat Nos. STOUTMINI1200BS20WLED 865SPCWH of HAVELLS / BN100CLED20S-6500PSUL 120GRS4 of PHILIPS / WIPRO. |
| 124 | Supply and fix 10W, 230 V, AC decorative, wall mounted, ultra slim, aluminim housing LED lighting fixture size (550x 23x37)mm,high lumen output, environmental friendly, energy efficient with electronic driver polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing. white coloured ABS end caps,complete with all fixing arrangement including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and as directed.Makes : Cat Nos- LUMILINE PLUSNEOBS10WLED865SPCSSINDS of havells/ LL20-111-XXX-65NE10W of WIPRO/ CCS103 1065SLDPNWH 10Wof CROMPTON. |
| 125 | Supply & fix in repair 36 W recess mounting ultraslim LED down lighter flat panel 2\"x2\" environmental friendly, new generation, aesthetically designed, ultra modern luminaire with high brightness SMD LEDs as light source,made of extruded aluminium frame with high efficient LEDs & glare free opal diffuser, IP20 suitable for armstrong/grid ceilingand makingconnections with twin twisted unsheathed PVC copper cable of suitable size complete all as specified and directed at site.Make : Cat No. VENUSTREDN2X2PLR36WLED857WHUGR19 of Havells / WIPRO /CROMPTON |
| 126 | Supply and fixing LED BLDG Security Light fitting 35 Watt, 230 V, AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp and corrosion resistant including thermal management in multiple optics complete with IP 66 protection separate optical and control gear compartment & top opening for easy maintenance, suitable for side entry, wall mounting with bracket arm OD 35 mm to 42 mm including necessary electrical connection to the fixture with 3 core flexible Cu conductor cable of appropriate size and 1.5 m long bracket, having 40 mm dia light grade GI pipe, including GI clamps, nuts, bolts & washers with two coats of synthetic enemal paint over a coat of red oxide primer complete all as specified and directed by engineer-in-charge.Makes : Cat Nos. ENDURASUNDOWNSL35LED765PASYBOPC of HAVELLS/ BRPO30PLED35CWSCRGRPSUSPD of PHILIPS / LRO2-391-XXX-57-XX35W of WIPRO. |
| 127 | S&F in repair Factory made Prewired TPN 4 ways distribution board in sheet steel enclosure vertical double door with suitable ratedbus bar, 415 Volts suitable for housing TPN MCBs as incomer and SP MCBs as outgoing fully shrouded neutral bar, earth bar, wire set & cable ties for cable management, pre fitted masking sheet, etc. IP 43 protection complete all as specified and as directed. |
| 128 | S&F in repair Factory made SPN 8 way distribution board in sheet steel enclosure double door with suitable ratedbus bar, 240 Volts suitable for housing RCBO SPNas incomer and SP MCBs, fully shrouded neutral bar, earth bar, wire set & cable ties for cable management, pre fitted masking sheet, etc. IP 43 protection complete all as specified and as directed.as outgoing complete all as specified and as directed. |
| 129 | S&F in repair MCB,Four pole,240 volts, 63 Amps 10 KA \"C\" curvein the MCB DB Complete with connection testing and commissioning complete all as specified and as directed. |
| 130 | S&F in repair 240V, 10 KA \"C\" curve MCB of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed. |
| 131 | Supply and fix RCBOs SPN 40 to 60 Amps, 240 volts 50Hz AC supply,in the MCB DB Complete with connection testing and commissioning complete all specified and directed. |
| 132 | M&L for Submain wiring with two single core PVC (FRLS) insulated flexible copper conductor cable of size 6 Sqmm and one single core PVC (FRLS) insulated unsheathed flexible copper conductor cable green colour of size 6.0 Sqmm as earth lead in and including PVC conduit medium grade/casing caping with all fittings suitable for concealed/surface type and making good the disturbed wall surfaces to match with existing specification all as required at site complete all as specified and directed at site.Note:- 3 runs of 6.00 sqmm cable including PVC conduit will be measured as 1 unit. |
| 133 | Material and Labour for Earthing complete with galvanized steel earth plate electrode 60cmX60cmX6mm thick, buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of plate not less\" than 1.5meters below normal ground level, earth plate connected to galvanized earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES SSR-2009 (part I Specifications) connected to earth test point all as specified or indicated including testing on completion, including necessary excavation and earth work in any type of soil and adequate quantity of common salt & charcoal for alternate layer around the earth plate, including PCC (1:2:4) earth pit and 10mm thick C.I. cover with arrangement of hinge to 40x40x6mm C.I. angle iron frame, including 20mm dia G.I. pipe medium grade for watering purpose with the arrangement of funel and wire mess, including GI pipe of 15 dia medium grade for earth lead protection complete all as specified and as directed. |
| 134 | Supply and fixLED post top light fitting (Gate light) of 15 Watt,240 Vsuitable for pole dia 50mm, energy saving, environmetal frindly, long life aesthetically designed with symmetrical light distribution, clear cover, bright illumination complete with all fixing arrangement including suitble GI pipe and electrical connection at site complete all as specified and directed.Make :Cat No. RUBYNXTPT15WLED757PSYMTOPC of Havells / Crompton/ Wipro |
| 135 | Supply and fix 8 W, 900 mm CONE NXG LED BOLLARD shaped, with CONE NXG series acts as an imposing street furniture with touch of aesthetic, innovative design with uniormly lit diffuser at the upper portion acts a beacon of path guidence in a landscape environment with robust IP 65 rating with all necessary accessories for fixing arrangement complete all as specified and directed. Make : Cat No. CONE NXGBLS8WLEDPSYM830TOPC ofHavells / Crompton/ Wipro |
| 136 | Supply and fix cable junction box thermopstic body IP 66 of size 225 mm x 295mm x 122 mm suitable for halogen free and waetherproof for out door installation with metric knockout for cable entry suitable for cable size 16 sqmm to 25 sqmm including01 No SP MCB single pole of capacity 5 to 30 Amps 240 Volts and MS clamp fabricated from 25 x 3mm MS flat iorn with bolts and nuts including two coats of enamelled painting over one coat of redoxide complete all as specified and directed. |
| 137 | M & L Twin core PVC (FRLS) insulated multi stranded copper conductor cable of size 1.5 Sqmm ISI marked with including suitable PVC conduit medium grade with all fittings complete all as specified and directed. |
| 138 | Supply, laying and testing of cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core laying in trenches/ fixed to walls/ floor / poles etc. including taking out of existing cable complete all as specified and directed. |
| 139 | Supply, laying and testing of cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25.0 sq mm 3.5 core laying in trenches/ fixed to walls/ floor / poles etc. including taking out of existing cable complete all as specified and directed. |
| 140 | Returning, filling including spreading, levelling, watering and well ramming in layers not exceeding 25 cms thick complete all as all as specified and directed. |
| 141 | Removal of surplus soil to a distance no exceeding 50 mtrs and depositing where directed at a lvevel not exceeding 1.5 mtrs above from the starting point complete all as all as specified and directed. |
| 142 | Supply and spread approved dry river sandforcushioning of cable laid in trenches including watering and consolidation, complete all as specified and directed.Note:- Punned thickness of sand cushioning shall only measured for payment purpose. |
| 143 | M&L brick protection with common burnt bricks sub class ‘B’ of size 230 x 113 x 75mm for cable protection complete all as specified and directed. |
| 144 | M & L for cutting of road, hard standing made of concrete or premix carpet, WBM, soiling and morrum filling including excavation for laying of cable/pipe all as directed and making good the road/hard standing by using all old/new materials and with PCC (1:2;4) etc, required to match with the existing surface complete all as specified and directed. |
| 145 | Supply and lay GI tube light grade40 mm bore, ISI marked with all fittings, complete, fixed to walls, pole ceiling or laid in trenches/floor for cable protection at road crossing/ on poles etc including Takingout complete all as specified and directed. |
