|
| 1 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 2 | Brick work 7 cm thick with Ist class common burnt clay F.P.S. brick (non modular) in cement mortar 1:3 (1 cement: 3 coarse sand) in superstructure above plinth level and upto floor five level. |
| 3 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. |
| 4 | Local best quality Teak wood |
| 5 | 35 mm thick shutters |
| 6 | 15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat ofneat cement on the roughside of single or half brick wall. |
| 7 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. |
| 8 | Size of Tile 600 x 600 mm |
| 9 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : |
| 10 | W.C. pan with ISI marked white solid plastic seat and lid. |
| 11 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: |
| 12 | White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P.brass pillar taps |
| 13 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. |
| 14 | Concealed work, including cutting chases and making good the wall etc. |
| 15 | 15mm nominal outer dia pipes |
| 16 | 40mm nominal outer dia pipes |
| 17 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 |
| 18 | 15 mm nominal bore |
| 19 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. |
| 20 | 15 mm nominal bore |
| 21 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : |
| 22 | 100 mm diameter |
| 23 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 24 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade |
| 25 | New work (two or more coats) over and including priming coat with cement primer:- |
| 26 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: |
| 27 | Two or more coats on new work over an under coat of suitableshade withordinary paint of approved brand and manufacture. |
| 28 | Renewing glass panes, with putty and nails wherever necessary: |
| 29 | Clearing grass and removal of the rubbish upto a distance of 50m outside the periphery of the area cleared |
| 30 | Painting of roof slab with water proofing paint |
| 31 | Wiring Item |
| 32 | Wiring for light point / Fan point/ Exhaust Fan ponit / Call bell point with 1.5mm2PVC insulated copper conductor single core cable in pvc casing and capping with piano type switch, phenolic laminated sheet suitable sizeM.S. Box and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc. as reqd. |
| 33 | 3. Group C |
| 34 | Wiring for circuit / sub- main wiring along with earth wire with ( the following sizes of )PVC insulated copper conductor single core cable in PVC casingand capping etc as reqd. |
| 35 | 2. 2x2.5mm2 + 1x2.5mm2 earth wire |
| 36 | 3. 2x4mm2+ 1x4mm2 earth wire |
| 37 | Wiring for circuit / sub- main wiring along with earth wire with the following sizes ofPVC insulated Al. conductor single core cable in PVC casing & Caping etc as reqd. |
| 38 | (2x10 mm² +1x10mm²earth wire |
| 39 | Fixing Items |
| 40 | S/F PVC box of size 101mmx178mm (Nominal size)/(4\"\"x7\"\")PVC board on surface including P/F 3 pin 5/6 amp socket outlet and 5/6 amp piano type switch connection etc as reqd. |
| 41 | S/F PVC box of size 152mmx203mm (Nominal or size)/(6\"\"x8\"\")PVC board on surface including P/F 6 pin 15/16 amp socket outlet and 15/16 amp piano type switch connection etc as reqd. |
| 42 | 76.2mmX76.2mmconical round plate |
| 43 | S/Fbrass batten /angle holder i/c conection etc as reqd. |
| 44 | S/F 3 pin 5 amp ceiling rose on the existing junction box /wooden block i/c connection etc as reqd |
| 45 | S/F 8W CFL lamp. |
| 46 | S/F 20W CFL lamp. |
| 47 | Supplying & fixing stepped type electronic fan regulator on the existing modular plate switch box i/c connection but excluding modular plate etc as reqd. |
| 48 | S/F 305mm sweep exhaust fan complete with all accessories i/c connection etc as reqd. |
| 49 | S/F 48\"\" Sweep (1200mm) A.C ceilling fan complete with down rod canopy, 3 (three) blades but without regulator etc as reqd.( Make Bajaj/Usha or simillar) |
| 50 | S/F 6 way (2+6 way) single door single pole and neutral , prewired, sheet steel MCB distribution board ,240 on surface /recessed complete with loose wire box, terminal blocks, tinned copper bus bar , neutral link, earth bar , din bar , detachable gland plate , interconnection , including powder coat painting, earth etc as reqd ( but without MCB /RCCB/Isolator) |
| 51 | Supplying and fixing 5 amp to 32amp rating 230 V \"B\" series MCB for lighting and other load of ( following poles ) in the existing MCB DB complete with connection testing and commissioning etc as reqd. |
| 52 | 1.Single pole |
| 53 | S/F( following rating) double pole 240v isolator in the existing MCB DB complete with connection ,testing and commissioning as reqd. |
| 54 | 1. 40 amp |
| 55 | Supplying and fixing wall mounted metal board of welded construction with minimum 35mmx35mmx6mm angle iron frame work with 25mmx6mm flat iron as intermediate membersi/c painting etc as reqd. |
| 56 | Providing and fixings (following capacity TP & N) disconnector fuse switch unit inside the existing cubicle panel board with ISI marks HRC fuses including drilling holes in the cubicle panel board, making connection as reqd. |
| 57 | 3. 100 ampTP&N |
| 58 | S/F Bus Bar chamber with 4 strips copper bus bar of length 300 mm suitable for 100 amp capacities complete with all accessories i/c connection earthing the body etc as reqd. |
