Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | SCH A PART-I : B/R PORTION |
| 2 | S & F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of old unserviceable corrugated steel sheet, complete all as specified and directed. |
| 3 | S & F Pre-painted galvalume aluminium zinc coating GI based Plain steel as in ridges sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screwsincluding dismantling of old unserviceable corrugated steel sheet, complete all as specified and directed. |
| 4 | S & F mild steel works Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts including all necessary drillings, boltings or rivettings etc., and similar works conforming to Fe-290, Gde-E-165 dismantling of old unserviceable wrought iron or mild steel work complete all as specified and directed. |
| 5 | S & F rolled mild steel sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for door doors, fixed with angle cleats or other connecting plates Fe-410-W (Gde E-250) quality -A including dismantling of old unserviceable wrought iron or mild steel work complete all as specified and directed. |
| 6 | S & F mild steel screws bolts 5 to 10 mm dia (machine made) with hexagonal or square heads at one end and screw the other or screwed both end to be fitted with washers and on hexagonal or square exc 5 cm but not exc. 10cm long including dismantling of old unserviceable wrought iron or mild steel work complete all as specified and directed. |
| 7 | M & L Plain Cement Concrete Type C21:3:6 (using 20 mm gradedstone aggregate) as packing of side gabble wall and other similar work complete all as specified and directed. |
| 8 | S&F 6mm thick non asbestos fibre cement designer building boards fixed or laid on aluminium frame/grid with screws as flat including S&F powder coatedaluminium snap grid frame work for false ceiling and also S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including dismantling of old unserviceable wall and ceiling board including framework & ceiling hanger rod of any description complete all as specified & directed. |
| 9 | M&L for roof treatment as per following stages complete all as specified and directed:(a) STAGE-IDemolition of old existing unserviceable roof treatment included cement concrete of any description and in any position from existing roof surface (upto maximum height of 10 metres from natural ground level) with power driven pneumatic chisel and including removal of debris and washing down with water to remove dust, foreign items complete.(b) STAGE-IIM&L preparation of old surface and applying two coat of high performance SBR based (Styrene-Butadiene Rubber) Synthetic emulsion bonding agent in the ratio of 1:4:6 (Bonding agent chemical:Water:Cement) in a criss cross way complete.[Note :- (i) Second coat of bonding agent chemical mixture is laid down minimum interval of 6-8 hours of first coat and after second coat of immediate applied plaster work.(ii) Make- Sikalatex power of M/s Sika; Pidicrete URP of Dr. Fixit; Nitobond SBR Latex of Fosroc, Shali SBR latex of similar make or any other make mentioned in PS here-in-after](c) STAGE-IIIM&L 40 mm thick average Plain Cement Concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in padding concrete on roof complete. |
| 10 | Item No. 1.008 Contd....(d) STAGE-IVM&L rendering 10mm thick on fair faces on roof surfaces of concrete in Cement Mortar 1:4 finished even and smooth without using extra cement and WPC complete.Note :- WPC will measured and paid separately under relevant item of schedule.(e) STAGE-VProviding and laying 3mm thick APP modified prefabricated five layer, minimum weighing 3.60kg/sqmreinforced with polyester non wove fabric (wt. not less than 160 gms/sqm) shall be applied over one coat of cold bituminous primer @ 0.40 ltr/sqm (membrane shall be laid using butane torch sealing all joints etc complete all as specified and directed.(Note: The over lap shall be of minimum 75mm in longitudinal direction and 100mm on transverse direction)complete.(f) STAGE-VIAppying two coats of aluminium bituminous paint over APP membrane over 10cm width/ girth not otherwise directed. |
| 11 | M&L Providing and laying 3mm thick APP modified prefabricated five layer, minimum weighing 3.60kg/sqmreinforced with polyester non wove fabric (wt. not less than 160 gms/sqm) shall be applied over one coat of cold bituminous primer @ 0.40 ltr/sqm (membrane shall be laid using butane torch sealing all joints etc and also include two coat of aluminium paint over APP modified prefabricated five layer complete all as specified and directed.[Note: The over lap shall be of minimum 75mm in longitudinal direction and 100mm on transverse direction] |
| 12 | M&L Rendering 15 mm thick cement plaster in Cement Mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra lime or cement)including taking down old unserviceable cement plaster of any description complete all as specified and directed. |
| 13 | M&L Rendering 15 mm thick cement plaster in Cement Mortar 1:4 onfair faces of brick/concrete surfaces with finished even and smooth without using extra cement and using water proofing compound admixture as per manufacturer\"s instruction, including taking down old unserviceable cement plaster of any description complete all as specified and directed.Note :- WPC will measured and paid separately under relevant item of schedule. |
| 14 | M&L rendering 5mm thick on fair faces of ceiling / chajja concrete surfaces in cement mortar 1:3finished even and smooth (without using extra lime or cement) with chicken wire mesh including taking down old unserviceable cement plaster complete all as specified and directed. |
| 15 | S&F 0.60mm thick stainless steel chicken wire mesh to fix in joint, crack area of column, beam and other similar area complete all as specified and directed. |
| 16 | Supply only Water Proofing Compound, complete all as specified and directed. |
| 17 | M&L Reinforced Cement Concrete (design mix), M-25 (using 20mm graded stone aggregate) as in slab supported on wall, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etcincluding demolition of old unserviceable reinforced cement concrete of any description complete all as specified and directed. |
| 18 | Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc surface of concrete flat with fair finished surfaces complete all as specified and directed. |
| 19 | M&L TMT mild steel bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed. |
| 20 | M&L TMT mild steel bars 6mm to 8mm dia ,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed. |
| 21 | M&L providing plain cement concrete type B0 1:2:4 (using 12.5mm graded stone aggregate) as in coping to chajja tops and all other similar works including demolition of cement concrete(unreinforced) complete all as specified and directed. |
| 22 | M & L water proofing treatment of sunken floor as per following stages complete all as specified and directed:(a) STAGE-I :Taking out old unserviceable treatment over sunken floor & clean the surface with wire brush, dirt less with water jet etc(b) STAGE-II : Providing and laying water proofing treatment of sunken portion of WCs, bathroom etc by applying cement slurry with acrylic based modified cementitious composite compound coating of make as approved in technical instruction 5/2003(c) STAGE-III : First layer of slurry of cement @ 0.488 Kg/Sqm mixed with acrylic based polymer modified cementitious composite compounds @ 0.253 Kg/Sqm. This layer will be allowed to air cure for 4 hours.(d) STAGE-IV : Second slurry of cement @ 0.242 Kg/Sqm mixed with acrylic based polymer modified cementitious composite compounds @ 0.126 Kg/Sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.(e) STAGE-V : 200 micron thick polythene film pasted with the help of bituminous adhesive shall be provided over treatment.(f) STAGE-VI : Plain Cement Concrete 1:5:10 using brick aggregate (E-2) for filling in the sunken portion.[Note : Concrete of sunken slab shall be mixed with WPC] |
| 23 | M&L 25mm thick Plain Cement Concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in roof, finished fair including demolition of old unserviceable concrete, complete all as specified and directed. |
| 24 | M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cemeent to match and including over screed bed or bedding layer of mortar 15 mm thick laying floor finished in Cement Mortar 1:6, including dismantling of old unserviceable floor hearth including backing plaster complete all as specified and directed. |
| 25 | M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqmon vertical surface such as skirtings etc. set and jointed in cement slurryover 10 mm thick rendering in Cement Mortar 1:3including dismantling of old unserviceable wall tiling including backing plaster, complete all as specified and directed. |
| 26 | M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exc. 0.11 Sqm, in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match and including over screed bed or bedding layer of mortar 15 mm thick laying floor finished in Cement Mortar 1:4including dismantling of old unserviceable floor hearth including backing plaster, complete all as specified and directed. |
| 27 | M&L Glazed ceramic tiles Coloured 300x450mm 7 to 8 mm thick in wall/dado etc, set & jointedin neat cement slurry & pointed in white or coloured cement to match renderingover 10 mm thick in Cement Mortar 1:3 on stone masonry surfaces or surfaces other than fair face of brick work/ concrete surfacesincluding dismantling of old unserviceable Dado/ wall tiling including backing plaster, complete all as specified and directed. |
| 28 | M&L 16-18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:3) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite of any type of workincluding dismantling of old unserviceable stone work, complete all as specified and directed. |
| 29 | M&L 18 to 20mm thick green marble (table rubbed and polished) in steps, jambs, pillars, window cills,bathroom corners cooking platforms and like in cement mortar (1:3) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with green marble shadeincluding dismantling of old unserviceable stone work, complete all as specified and directed. |
| 30 | Rounding to edges of stone slabs exposededge, such as in steps, cooking platform and othersimilar situation, complete all as specified and directed. |
| 31 | M&L Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete lad over cement screed and jointed over screed bed or bedding layer of mortar 20mm thick in Cement Mortar 1:4 for laying floor finishincluding dismantling of old unserviceable stone work, complete all as specified and directed. |
| 32 | M&L Kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with ditto as per item 1.030 above over 10mm thick in cement mortar Cement Mortar 1:4 including dismantling of old unserviceable stone work, complete all as specified and directed. |
| 33 | Taking down chowkats or frames exc 1.5 sqm but n. exc 4 sqm each with shutters (without taking off shutters from the frame), complete all as specified and directed. |
| 34 | Taking down of chowkats or frames not exc 1.5sqm each with shutters (without taking off shutters from frames), complete all as specified and directed. |
| 35 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows and other frames/chowkhat of size 50x100 mm comprising of virgin PVC polymer of K value 58-60 (suspension grade ), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS scews having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200N (face) and 1100N (Edge), minimum compressive strength of 58 N/mm2 and resistance to spread of flame of class A category with property of being termite /borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length, complete all as specified and directed.[Note : (i) M.S. hold fast/lugs or SS dash fasteners shall be paid for separately.(ii) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e depth and width of profile shall be acceptable. Variation in profile demension on plus side shall be acceptable but no extra payment on this account shall be made.] |
| 36 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows and other frames/chowkhat of size 50x125 mm comprising of virgin PVC polymer of K value 58-60 (suspension grade ), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS scews having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200N (face) and 1100N (Edge), minimum compressive strength of 58 N/mm2 and resistance to spread of flame of class A category with property of being termite /borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length, complete all as specified and directed.[Note : (i) M.S. hold fast/lugs or SS dash fasteners shall be paid for separately.(ii) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e depth and width of profile shall be acceptable. Variation in profile demension on plus side shall be acceptable but no extra payment on this account shall be made.] |
| 37 | S&F factory made single extruded WPC (wood polymer composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers(wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum frame density of 650 kg/cum, screw withdrawal strength of 1800N (face) and 900N (Edge), minimum compressive strength of 50 N/mm2, modulus of elasticity 850N/mm2 and resistance to spread of flame of class A category with property of being termite /borer proof, water/moisture proof and fire retardant and fixing with stainless steelbutt hings of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.[Note : Stainless steel butt hinges and necessary SS Screws shall be paid separately.] |
| 38 | S&F 35mm thick factory made single extruded WPC shutter (wood polymer composite) solid wire gauzed i.e. panel will be of wire gauze in lieu ofpanel. The comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers(wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum frame density of 650 kg/cum, screw withdrawal strength of 1800N (face) and 900N (Edge), minimum compressive strength of 50 N/mm2, modulus of elasticity 850N/mm2 and resistance to spread of flame of class A category with property of being termite /borer proof, water/moisture proof and fire retardant and fixing with stainless steelbutt hings of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.[Note : Stainless steel butt hinges and necessary SS Screws shall be paid separately.] |
| 39 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and directed. |
| 40 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing, complete all as specified and directed. |
| 41 | Dismantling wooden boarding, any description, fixed in any position with nails, complete all as specified and directed. |
| 42 | M&L Plywood 12 mm thick, grade BWR, type BB, fixed with screws to timber frame work for snake guard complete all as specified and directed. |
| 43 | S&F 18/19mm thick prelaminated board interior grade pre-laminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and directed. |
| 44 | S&F 18/19mm thick prelaminated PVC soild board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination for shutters, fixed with angle frame work incl stainless steel piano/ hinges, complete all as specified and directed. |
| 45 | S&F magnetic door catch drawer magnet including all necessary fittings complete all as specified and directed. |
| 46 | S&F 18/19mm wide PVC lipping of 6mm thick fixed with nails on PVC board or veneered PVC board for external complete all as specified and directed. |
| 47 | S&F factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 122 x 54 mm & sash 47 x 64 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed.[Note : (i) Glass or wiremesh shall be paid separately.(ii) For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.] |
| 48 | S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 , the grill shall be inserted in the wall surface including necessary drilling and grouting with cement etc, complete all as specified and directed. |
| 49 | M&L sheet glass 4.8 mm thick ordinary quality and glazing with oil putty and pin in square n. exc 0.50 sqm in each pan, complete all as specified and directed. |
| 50 | M&L sheet glass 4.8 mm thick ordinary quality and glazing with oil putty and pin in square exc 0.50 sqm in each pan, complete all as specified and directed. |
| 51 | M&L 4mm thick figured glass, pin head type and glazing with oil putty or with brass screws in square n.exc 0.50 sqm in each pan for bathrooms/toilets ventilators, complete all as specified and directed. |
| 52 | S&F stainless steel butt hinges 100mm long fixed to frame with stainless steel screws complete all as specified and directed. |
| 53 | S&F stainless steel butt hinges 75mm long fixed to frame with stainless steel screws complete all as specified and directed. |
| 54 | S&F stainless steeltower bolts 150 mm long fixed with stainless steel screws complete all as specified and directed. |
| 55 | S&F stainless steeltower bolts 100 mm long fixed with stainless steel screws complete all as specified and directed. |
| 56 | S&F stainless steel fancy bow handle 150 mm long fixed with stainless steel screws complete all as specified and directed. |
| 57 | S&F stainless steel fancy bow handle 100 mm long fixed with stainless steel screws complete all as specified and directed. |
| 58 | S&F stainless steel fancy type sliding door bolt of 300mm long with hasp, staple, staple (bolt type) and fixing with stainless steel screws complete all as specified and directed. |
| 59 | S & F aluminium 75 mm long hasp and staple, aluminium anodized with bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 60 | S&F 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 61 | S&F 300 mm mild steel ordinary rat tail rod pattern spring including roller and roller plates complete all as specified and directed. |
| 62 | S&F in repairs 1 inch dia stainless steel fancy curtain rods (SS:304) with conical end balls suitable for fixing as end of curtain/drapery rods complete all as specified and directed. |
| 63 | S&F as in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 64 | S&F in repairs glass corner shelf with SS guard and railing (size- 200mm x200mm) for bathroom, complete all as specified and directed. |
| 65 | S&F in repairs stainless steel kitchen plate rack (SS:304) made out of 0.63mm thick of approved make with plugs, washers & SS screws over all size 786mmx610mmx254mm (approx), complete all as specified and directed. |
| 66 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed. |
| 67 | M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe 410-W (Gde-e-250)quality A including dismantling old unserviceable iron works, complete all as specified and directed. |
| 68 | M&L Plain Cement Concrete 1:3:6, type C1(using 40mm graded stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed. |
| 69 | M&L old size brick work with fly ash bricks straight or curved on plan exc 6 m mean radius build in Cement Mortar 1:6 including dismantling of old unserviceable half brick work, complete all as specified and directed. |
| 70 | M&L brick work with half bricks thick fly ash bricks straight or curved on plan exc 6 m mean radius build in Cement Mortar 1:4 including dismantling of old unserviceable half brick work, complete all as specified and directed. |
| 71 | M&L prepration of newly plastered surfaces of wall and applying two coat of oil bound distemper over one coat of alkali resistanse primer over a coat of 1mm thick wall care putty, complete all as specified and directed. |
| 72 | M&L prepartion of newly plastered ceiling surfaces and applying three coat of white wash, complete all as specified and directed. |
| 73 | M&L preparation of new plastered surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed.[Note : Min 5 (five) years guarantee certificate from manufacturer shall be submitted before issue of completion certificate.] |
| 74 | M&L preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer of any description not otherwise described over 10cm width or girth, complete all as specified and directed. |
| 75 | M&L complete removal of existing treatment(any layers of existing treatment ) from walls/pillars/cornices by scraping down with using steel patti and mechanical sander machine (including provision of dust sucking) upto entire satisfaction of Engineer-in-charge, brooming and washing down with water including applying 1mm thick wall care putty to make the surface even and smooth by using sander machine (with provision of dust sucking) as directed by Engineer-in-charge, after preparing the surfaces applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified.[Note : Min 5 (five) years guarantee certificate from manufacturer shall be submitted before issue of completion certificate.] |
| 76 | M&L complete removal of existing treatment(any layers of existing treatment ) from walls/pillars/cornices by scraping down with using steel patti and mechanical sander machine (including provision of dust sucking) upto entire satisfaction of Engineer-in-charge, brooming and washing down with water including applying 1 mm thick wall care putty to make the surface even and smooth by using sander machine (with provision of dust sucking) as directed by Engineer-in-charge, after preparing the surfaces applying two coats ofoil bound distemper , of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification, complete all as specified and directed. |
| 77 | M&L Preparation of old decorated surfaces (plastered/unplastered)of ceiling by removing / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using broom / steel patti / wire brush / sand papering or by any other mean including applying wall care putty where required for filling to depressions/nail holes/light cracks etc and to make the surface even and smooth and also using sander machine (with provision of dust sucking) on uneven surface to make the surface even and smooth (before and after applying putty as per site situation) as directed by Engineer-in-charge and after preparing the surface smooth applying one coat of white wash on ceiling surfaces with paint brush complete all as specified and directed |
| 78 | M&L writing letters or figures (block, Roman, Italic or indian) n exc 30 cm, complete all as specified and directed. |
| 79 | M&L for removing of cavities roughening the smooth surface scrapping out/removing corrosion all loose/scale/rust etc from the visible reinforcement by applying rust remover @ 20 ml per sqm or as per manufacturer\"s instruction, rust removal and cleaning the steel reinforcement properly and then applying 40 micron thick dry thickness coat of epoxy zinc primer @ 250 ml per sqm or as per manufacturer\" s instructions of exposed and new steel reinforcement (measured flat) complete all as specified and directed |
| 80 | M&L welding mild steel wire mesh weighing not less than 1 kg sqm and primed with Nitco zinc primer or similar make as mentioned in particular specification, fixing to the prepared concrete surface through proper fixing arrangements and applying 40mm thick average cement mortar with guniting /shotgun at a pressure not less than 4 kg sqm in ratio 1:2 mixed with liquid water proofing compound chemical not less than 5% by weight of cement including lapping of new reinforcement to the rusted portion all as per manufacturer\"sinstructions and carried out the work as per procedures complete all as specified and as directed. |
| 81 | Cutting chases, pinning in making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good, cutting n. exc. 10cm girth, complete all as specified and directed. |
| 82 | S&F 20 mm outer dia medium grade CPVC, SDR 11 & plain CPVC SDR 11with all fittings (brass inside the fittings) and fixed complete to walls and ceiling or laid in floors including taking up/ down of old unserviceable steel tubing, complete all as specified and directed. |
| 83 | S&F 25 mm outer dia medium grade CPVC, SDR 11 & plain CPVC SDR 11with all fittings (brass inside the fittings) and fixed complete to walls and ceiling or laid in floors including taking up/ down of old unserviceable steel tubing, complete all as specified and directed. |
| 84 | S&F in repairs vitreous China squatting pan, \"Orissa patteren, size 580 x 440 mm white, with integral footrests (excluding flushing cisteren and flush pipe) including trap set in and including concrete, complete all as specified and directed. |
| 85 | S&F in repairs vitreous china wash down closet pan white, pedestal pattern pedestal pan and trap (excluding flushing cistern and flush pipe), connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc and including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel CP or aluminised hinging device including CP jet spray, complete all as specified and directed. |
| 86 | S&F in repairs vitreous China wash basin white, flat back,size 550X450 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets including cutting for pinning in ends of brackets or erecting stand including waste pipe, complete all as specified and directed. |
| 87 | S&F in repairs 10 litre capacity PVC low level flushing cisternwith all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete (with brackets), including flush pipe of plyethene of low or high density of PVC 32mm dia for low level cistern, complete all as specified and directed. |
| 88 | S&F in repairs 15mm bore, fancy type, stop valve/angle cock (multiple) , chromium platedconcealed type cast copper alloy, screwed down , high pressure , with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed. |
| 89 | S&F in repairs PVC connection 15mm size PTMT nuts of length 450mm, complete all as specified and directed. |
| 90 | S&F in repairs 15mm bore long neck pillar taps cast copper alloy,with capstan heads, chromium plated, screwed down, fancy type high pressure, with or without lettred \"HOT or COLD\" with long screwed sunk and fly nuts, complete all as specified and directed. |
| 91 | S&F in repairs bib taps, cast copper alloy 15mm bore long neck body with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed. |
| 92 | S&F as in PTMT grating square, 150mm size of PTMT(minimum weight 100 gms), complete all as specified and directed. |
| 93 | S&F as in PTMT grating, square with waste hole, 150mm size of PTMT(minimum weight 100 gms), complete all as specified and directed. |
| 94 | S&F in repairs 600X450 mm bevelled edge mirror of selected quality glass, mounted of 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup, complete all as specified and directed. |
| 95 | S&F in repairs sinks with drainage board made of stainless steel (SS:304) 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including 40mm dia PVC waste pipe, complete all as specified and directed. |
| 96 | S&F in repairs tubular towel rail brass chromium plated 20 mm dia `D\" type 60 cm long between flanges, complete all as specified and directed. |
| 97 | S&F in repairs chromium plated shower roses 125 mm longwith or without swivel joints, any size, including fixing fixing to steel pipe or union, complete all as specified and directed. |
| 98 | S&F MS flat iron as in hold fast clamps small articles conforming to Fe-290 Gde-E-165, complete all as specified and directed. |
| 99 | S&F PVC SWR pipes 110 mm bore single socketed in any length with rubber ring joint fixed to wallwith steel clamps including dismantling old unserviceable existing pipes, complete all as specified and directed. |
| 100 | S&F PVC SWR pipes 75 mm bore single socketed in any length with rubber ring joint , laid in trenches or in floors including dismantling of old unserviceable existing pipe, complete all as specified and directed. |
| 101 | S&F PVC SWR bends of 110 mm bore, complete all as specified and directed. |
| 102 | S&F PVC SWR bends of 75 mm bore, complete all as specified and directed. |
| 103 | S&F PVC (SWR) junction single (single T) equal or unequal provided with access door of 110 mm bore, complete all as specified and directed. |
| 104 | S&F PVC (SWR) floor trap plain including jointing with solvent cement 75 mm bore, complete all as specified and directed. |
| 105 | S&F PVC (SWR) vent cowl 110 mm bore, complete all as specified and directed. |
| 106 | M&L PVC (SWR) gully trap 125/110 mm setting and jointing with solvent cement, complete all as specified and directed. |
| 107 | S&F in repairs for Gun metal gate valve, 20 mm bore, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed. |
| 108 | M&L 75mm Plain Cement Concrete 1:3:6 type C1 (using 40mm graded stone aggregate) finished the as in plinth protection surfaces even and smooth without using extra including demolition of old unserviceable concrete cement complete all as specified and directed. |
| 109 | M&L forming construction joint 30mm deep X 10mm wide with sealing compound grade A, complete all as specified and directed. |
| 110 | M&L Plain Cement concrete 1:3:6, type C-1(using 20mm graded stone aggregate) in surface channels and drains and Manholes including demolition of old unserviceable concrete complete all as specified and directed. |
| 111 | M&L Extra for forming 40 cm inner girth fair finished drains or channels i.e. exc 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/ stopped ends etc complete all as specified and directed. |
| 112 | M&L providing precast cement concrete type B0 1:2:4 (12.5mm graded aggregate) louvres and jallies 55mm thick(measured solid) including all mouldings but excluding frame set in cement mortar 1:4 complete all as specified and directed. |
| 113 | M&L concrete bed to 150mm dia drain pipes including packing under,and haunching against the sides of pipes after they are laid and tested in Plain Cement Concrete 1:3:6 type C2 (using 40mm graded stone aggregate) including demolition & breaking up 150mm dia old unserviceable drain pipes, complete all as specified and directed. |
| 114 | Supplying and laying UPVC Eco drain Hi-tech pipe drainage sewer system pipe bearing 160mm dia minimum 4mm thick including jointing with coupler, bend tee as per site requirement complete laid in trenches or floors, complete all as specified and directed. |
| 115 | M&L in repairs precast cement concrete cover Type B-1,1:1.5:3(using 20mm graded crushed stone aggregates) set in Cement Mortar 1:4 as in mahhole cover etc., complete all as specified and directed. |
| 116 | M&L broken stone/boulders hard core gauge n.exc 63mm deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surfaces complete all as specified and directed. |
| 117 | M&L 75mm thick Plain Cement Concrete 1:4:8, type D2 (using 40 mm graded stone aggregate) as sub base of floor including dismantling old unserviceable concrete complete all as specified and directed. |
| 118 | M&L in repairs factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 119 | M&L average 50mm thick sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 120 | M&L in repairs machine pressed precast concrete interlocking paver coloured block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified anddirected |
| 121 | Sch A Part -II (Internal Electrification) |
| 122 | Taking down carefully aluminium conductor point wiring (light, fan, socket or power) completeincluding fittings such as switches, ceiling roses, pendants, regulators ,sockets etc. and removing(except those to be reused shall be kept in safe custodyat the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing complete all as specified and directed. |
| 123 | M&L point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one wayswitch using1.5 sqmm nominal cross sectional areamultistrandedcopper conductor ,PVC insulated unsheathedFRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes/ modular, 3 mm thick bakelite sheet top cover (ISI Marked)fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectional area multistranded copper conductor FRLSHPVC insulated unsheathed earth wire and connecting to earth dolly andbrass screws, washers etc. complete all as specified and directed. |
| 124 | All as per item No. 2.02 above but One 3 pin 5 Amps socket outlet points with cable 2.5 Sqmm on independent boardcomplete all as specified and directed. |
| 125 | All as per item No. 2.02 above but 5 Amp socket on same board with other switch, with cables 1.5 sqmm size complete all as specified and directed. |
| 126 | All as per item No. 2.02 above but5 Amp Calling bell point controlled by one way bell switches with other switchescomplete all as specified and directed. |
| 127 | All as per item No. 2.02 above but one light point conrolled by Two way switches with cables 1.5 sqmm complete all as specified and directed. |
| 128 | M&L wiring for socket outlet on independent Boardscontrolled by one, one wayswitch using4.0 sqmm nominal cross sectional areamultistrandedcopper conductor, PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, includingpressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked)fitted with Chromium plated brass screws & washers and 2.5 sqmm nominal cross sectional area multistranded copper conductor , PVC insulated unsheathed FRLSH cable earth wire and connecting to earth dolly andbrass screws, washers etc.complete all as specified and directed. |
| 129 | S&F switch piano, flush type, single pole , 5/6 Amps, one way complete all as specified and directed. |
| 130 | S&F switch piano, flush type, single pole , 16 Amps, one way complete all as specified and directed. |
| 131 | S&F switch piano, flush type, single pole, 2 way, 5/6 Amps, one way complete all as specified and directed. |
| 132 | S&F switch socket combination 2 in 1 multipurpose5 pin , (6 Amps ) flush typecontrolled by one switch complete all as specified and directed. |
| 133 | S&F socket outlets 2 in 1, 5 pin, 5/6 Amps flush type 230/240 V complete all as specified and directed. |
| 134 | S&F socket outlets 3 pin, 16 Amps flush type 230/240 V complete all as specified and directed. |
| 135 | S&F switch socket combination 5 in 1 , (5/16 Amps) flush typecontrolled by one switch complete all as specified and directed. |
| 136 | S&F ceiling rose surface bakelite 65 mm x 50 mm three terminal suitable for 230 Volts AC 6 Amps complete all as specified and directed. |
| 137 | S&F 5-stepped type electronic fan regulator, flush type, 240 Volts ISI marked complete all as specified . |
| 138 | S&F lamp holder, PVC/polycarbonate type with back plate straight of angle suitable for LED lamp complete all as specified and directed. |
| 139 | S&F Turbo 9 watt inverter LEDlamp B22 9 watt of capacity 220 - 240 volts, 50 Hz complete all as specified and directed. |
| 140 | S&F Bell push switch, flush type,5 amp complete all as specified and directed. |
| 141 | S&F Buzzer, Ding dong, AC 230 Volts, single pole 230 volts all as specified and directed. |
| 142 | M&L sub-main wiring with two run of FRLSH PVC insulated unsheathed single core multi-stranded copper conductor of size 4 sqmm and one run of 2.5 sqmm copper conductoras continuityearth wiredrawn in and including PVC Conduit concealed of suitable size but not less than 20 mm dia on wall / floor etc, including PVC fittings such as bends Tee and boxes including taking down old unserviceable sub main wiring all as specified and directed.[Note : (i) Two run of 4 sqmm cable, one run of 2.5 sqmm cable, one run of PVC conduitshall be measured and paid as one unit.] |
| 143 | M&L sub-main wiring with two run of FRLSH PVC insulated unsheathed single core multi-stranded copper conductor of size 6 sqmm and one run of 4 sqmm copper conductoras continuityearth wiredrawn in and including PVC Conduit concealed of suitable size but not less than 20 mm dia on wall / floor etc, including PVC fittings such as bends Tee and boxes including taking down old unserviceable sub main wiring all as specified and directed[Note : (i) Two run of 6 sqmm cable, one run of 4 sqmm cable, one run of PVC conduitshall be measured and paid as one unit.] |
| 144 | S&F wall LED street/security light fittings 35 watt, 230 volts, AC outdoor type with high pressure die cast aluminium hosing and eat resistant comlet with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protectioncomplete all as specified and directed. |
| 145 | S&F LED light fitting 1 x 20 watt box type with same make LED tube rod side connection AC decorative box type 4\" long with driver, holder including LED tube connecting up with complete all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing complete all as specified and directed. |
| 146 | S&F wall mounted Decorative wall light fixture made up of Polycarbonate, suitable for 9 W with 9W LED bulb retrofit LED Lamp B22 base complete all as specified and directed. |
| 147 | S&F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 148 | S&F round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 149 | S&F LED light fitting mirror typeLED Pride Plus Neo Batten 10 W2 feet. 220 volts ACwith holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 150 | S&F in repairs ventilating plastic body exhaust fan250 mm sweep 230 volt AC, complete with louver and all accessories including cutting holesquare shape of suitable size, making good surface by doing plaster and applying two coat of distemper complete with fixing arrangement to wall connected with twin core twisted flexible copper conductorof suitable size complete all as specified and directed.[Note : (a) Warranty certificate from manufacturer shall be submitted to Engr-in-Charge for claiming the payment(b) Old unserviceable exhaust fan shall be deposited at MES store with receipt voucher] |
| 151 | S&F epoxy powder coated sheet metal enclosure for TPN DBs, 4 ways, double door with mounting fitted with bus bar, DIN channel , neutral link and incoming contact, IP-43 complete all as specified and directed. |
| 152 | S&F epoxy powder coated sheet metal enclosure for DBs, double door, Single pole and neutral, 12 ways,with mounting fitted with 200 Amps rated bus bar, DIN channel , neutral link and incoming contact complete all as specified and directed. |
| 153 | S&F MCB 4 pole, 415 volts fixed type 40 to 100Amps, \"C\" Curve with breaking capacity 10 kA complete including necessary connection complete all as specified and directed. |
| 154 | S&F MCB SPN 40 -63 Amps,\"C\" curve 10kA, 240 Volts and to be housed in DBscomplete including necessary connectionall as specified and directed. |
| 155 | S&F MCB SPN 32 Amps, \"C\" curve 10kA, 240 Volts and to be housed in DBscomplete including necessary connectionall as specified and directed. |
| 156 | S&F MCB SP 6-32 Amps,\"C\" curve 10kA, 240 Volts and to be housed in DBscomplete including necessary connectionall as specified and directed. |
| 157 | M&L earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, buried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI wire encased inand including 40 mm dia GI \"lightgrade\" pipe from upper end of earth plate upto equipments,20 dia bore GI pipe \"light grade\" as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe andPlain Cement Concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and Reinforced Cement Concrete pit cover 50mm thick precast Reinforced Cement Concrete 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I testing of resistance on completion completeall as specified and directed. |
| 158 | M&L cutting holes (round type/square shape) suitable for exhaust fan 300 mm sweep andincluding making good all disturbed surfaces to match the existing position and two coat colour distemper complete all as specified and directed. |
| 159 | M&L taking down of ceiling fans of any sweep and transportation to work shopincluding dismantling for repair/overhauling, oiling, greasing, varnishing andreplacementofunserviceable accessories like capacitor, connector etc. After repair re-assembling fan, testingfor efficient functioning including hanging it back in position and provn of 0.5 Sqmm copper flexible twin twisted cable (length not exceeding 0.5 metre) from ceiling rose to fan , complete all as specified and directed.[Note: Capacitor and Connector are measured & paid separately] |
| 160 | M&L painting of ceiling fans upto 1400mm sweep carefully, dismantling fan blades and paint with one coat of synthetic enamel paint including filling cavities with filler after cleaning all dust etc, complete all as specified and directed. |
| 161 | SupplyonlyCapacitor 2.5 mfd, 230 Volts, AC, 50 Hz, 440 VACfor ceiling fans complete all as specified and directed. |
| 162 | Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying of cables, pipes etc. and getting outincluding trimming the sides and forming bottom surfaces to required levels in soft/loose soilcomplete all as specified and directed. |
| 163 | Returning, filling in, including spreading, levelling, and well ramming in layer not exceeding 25 cm thick in soft/loose soil complete all as specified and directed. |
| 164 | Removing excavated material (soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed. |
| 165 | Supply, laying, connecting, testing and commissioning of LT under ground cable XLPE insulated, armouredheavy duty electric cablewith aluminium conductor , 1100 vlts grade , cross sectional area 35 sqmm 3.5 core including taking out in trenches complete all as specified and directed.[Note:- (i) Excavation, sand cushioning, brick will be measured and paid separately.] |
| 166 | M&L river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling complete as specified and directed .[Note :- Punned thickness 18 cm shall only be considered for payment] |
| 167 | Supply and lay in trenches fly ash bricks, for cable protection all as specified and directed. |
| 168 | S&F Pipes galvanized iron,50 mm bore “light grade”, supplied and laid complete including necessary fittings such as tees, bends, elbows, sockets, reducers etc as per site requirement complete all as specified and directed. |
| 169 | S&F Galvanised Iron pipe 50mm Bore (dia) \"Light Grade\" for protection of UG cable laid in floors/Road Crossing ,complete all as specified and directed. |
| 170 | Labour only for horizontal boring by HDD (Horizontal directions drilling) machine/ trenchless boring machines/ cable pipes for passing protection pipe up to 80mm Bore(dia) under road/foot path not exc 10 mtr in a single length complete all as specified and directed.[Note : pipe to be measure separately.] |
| 171 | S& Laying DWC HDPE pipe for LT Cable protection double wall corrugated (inner wavy 450N) Size of 63mm complete all as specified and directed. |
| 172 | S&F Pipes galvanized iron, 25 mm bore “Mediumgrade”, supplied and fixed complete to walls and ceilings or laid in floors complete including necessary fittings such as tees, bends, elbows, sockets, reducers etc as per site requirement including taking up item old unserviceable complete all asspecified and directed.[Note: Excavation and earthwork will be measured and paid separately] |
| 173 | S&F Pipes galvanized iron, 25 mm bore “Mediumgrade”, supplied and laid in trenches complete including necessary fittings such as tees, bends, elbows, sockets, reducers etc as per site requirement GI pipe complete all as specified and directed.[Note: Excavation and earthwork will be measured and paid separately] |
| 174 | Refixing old steel tubing including cleaning and connections in new or old position (in trenches, on wall/ceiling & floors etc) of 25 mm bore GI pipe including taking up/ down old serviceable GI pipes complete all as specified and directed.[Note: Excavation and earthwork will be measured and paid separately] |
| 175 | S&Fgun metal,gate valve ISI marked, 25 mm dia with iron wheel head, screwed both ends for iron pipe and fix complete all as specified and directed. |
| 176 | S&F in repairs capacity 500 Ltrs rotational moulded polyethylene water storage tanks (minimum 3 layered), white, anti bacterial, UV resistant, Threaded lid, anti microbial, 100% virgin food grade plastic, prevent algae growth, anti viral/ bacterial/ fungal/ algae properties, (Cylindrical, vertical with closed top) complete including provision of all inlet outlet overflow and drain pipe fittingincluding taking down unserviceable tank, complete all as specified and directed. |
| 177 | S&F in repairs of high pressure PTMT float valve with epoxy coated aluminium rod and high density polyethylene ball screwed for iron pipe 20 mm dia with fly nut complete all as specified and directed. |
| 178 | S&F in repairs electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat,NRV, connection piece etc. complete all as specified and directed.[Note : (a) Warranty certificate from manufacturer shall be submitted to Engr-in-Charge for claiming the payment(b) Old unserviceable exhaust fan shall be deposited at MES store with receipt voucher] |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
