|
| 1 | Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 2 | Material and Labour for 75mm thick Plain Cement Concrete 1:3:6 type C2 using40 mm graded stoneaggregate as in plinth protection, floors, pavings and hardstanding etc, finished even smooth without using extra cement etc including necessary forwork, complete all as specified and as directed. |
| 3 | Material and labour for 100mm thick plain cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregateas in sub base of floors including necessary form work all as specified and as directed. |
| 4 | Demolition of reinforced cement concrete of any description ad in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed. |
| 5 | Materialand Labour forreinforced cement concrete 1:2:4 type B1 using 20mm graded granite stone aggrgate as in Columns, pillars, piers, posts and strutsand the like complete all as specified anddirected. Note : Reinforcement and form workshall be measured and paid separately. |
| 6 | Use and waste of formwork to sides ofpillars, post, struts, piers, coloumn and stanchions, square, rectangular or polygonal, fair finished surfaces of concrete all as specified and as directed. |
| 7 | Material and Labourfor TMT bar 10mm dia and over, cut to length, bent to shape required, including cranking,bending spirally for hooping ,for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 8 | M&Lmild steel TMT bars 5mm diaandover up to 10mm for stirrups cut to length , bent to shape required including cranking, bending, spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia bars,complete in all respect as specified and directed. |
| 9 | Materialand Labour for 40mm thick plain cement concrete 1:2:4 type B1 using 20mm graded granite stone aggrgate as floor and other similar type of work, and finishing cement concrete surface even and smooth Without using extra cement, complete all as specified and as directed. |
| 10 | Dismantling of floor, hearth or wall tiling including cement mortar bedding but not backing) and rubbish of the premises all as specified. |
| 11 | Material and Labour for non-skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc, set and jointed in cement mortar and pointed in white of coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.NOTE: No extra cost shall be allowed for removing and re-fixing and necessary cutting of door etc if any required during execution of work. |
| 12 | Material and Labour for glazed ceramic coloured tiles in vertical surface 450x300x7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles over and including 10mm thick backing coat in CM 1:4 cmplete all as specified. |
| 13 | Material and Labour for non-skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc, set and jointed in cement mortar and pointed in white of coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.NOTE: No extra cost shall be allowed for removing and re-fixing and necessary cutting of door etc if any required during execution of work. |
| 14 | Taking down Chowkats or frames exceeding 1.5 Sq. M but not exceeding 4 Sq. M each (without taking off shutters from the frame) complete all as specified and directed. |
| 15 | Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 Sqm each as doors, windows & ventilators etc. and removal from site complete all as specified and directed by Engr-in-charge. |
| 16 | Supply and fixing Solid PVC Door Frame of size 50 mm x47mm made out of 5 mm plain colour PVC sheet reinforced with M.S. Square tube, supporting& fixing in opening as per specification & drawing complete all as specified and directed. |
| 17 | Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of mild steel tubes for top & bottom rails, mild steel frame shall be covered with heat moulded plian colour PVC \"C\" channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement supplying and fixing in the frame at site as per specification & drawing of SSR Part II. |
| 18 | Supply and fix extruded aluminium alloy handles, fabricated type, anodised 150mm size complete all as specified and as directed |
| 19 | Supply and Fix 125mm long aluminium anodised barrel tower boltof extruded section all as specified and as directedby Eng-in-charge. |
| 20 | Supply and fix 100mm long mild steel cold rolledmedium weightbutt hinges fixed with screws to wooden frames or with welding to steel frames including all accessoriescomplete all as specified and as directed. |
| 21 | S&FPowder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom andsideswithrequired EPDM rubber/ neoprene gasket etc.Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, completeall as specified and as directed. Note: Quoted rate shall be inclusive of rubber beading, glazing clips. Glass pane shall be measured and paid separately. |
| 22 | Supply and fix powder coated (minimum thickness of powder coating 50 micron), aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, and sliding tower bolt 150mm long anodised aluminium snap beading, screws etc. complete all as specified and as directed. |
| 23 | Supply and fix powder coated (minimum thickness of powder coating 50 micron),aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed. |
| 24 | Supply and fix Powder Coated aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum coating of grade AC 15) of DG 102 design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved aluminium standard section around the opening, all complete as per requirement complete all as specified and directed. |
| 25 | Supply and fixing aluminium alloy,anodised, sliding door boltof length 250mm with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded section or cast-aluminium alloy complete all specified and as directed. |
| 26 | Supply and fix Aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with Aluminium alloy wire staples complete all as specified and directed |
| 27 | Supply and fix door closer hydraulically regulated cast iron body, designation No 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 Kg and fixed complete all as specified and as directed. |
| 28 | Supply and fixing floor door stopper aluminium alloy body and tongue, anodised with hard drawn steel spring, 150 mm over all length of cover platecomplete all as specified and as directed. |
| 29 | Supply and Fix 150mm long aluminium anodised barrel tower boltall as specified and as directedby Eng-in-charge. |
| 30 | Supply and Fixing 5.5mm thick glass, ordinary quality and glazing with oil and putty in square not exc 0.5 sqm in each pane complete all as specified and as directed. |
| 31 | Material and Labour for pre-laminated particle board 12 mm thick, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws in timber frame work complete all as specified and directed. |
| 32 | Demolition of brick work / stone boulder / PCC block masonary, built in cement mortar or cement lime mortar including all quoins, arches pillars, etc but excluding ashlar facing, dressed stone works,precast concrete articles and precast concrete block wallings complete all as specified and as directed. |
| 33 | M&L for Pre-cast cement concrete block masonry withsolid blocks using type C1(1:3:6) (20mm graded aggregate) ,size exc 10cm in width and setting in cement mortar 1:6 complete all as specified and directed. |
| 34 | Material and labour forproviding cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate cast in situ asin kerbs or mud stops, rounded or chamfered on edges, as directed including use of form work as necessary all as specified and as directed. |
| 35 | Taking down cement plastering on concrete or Brick works surface racking out joints, hacking for key , scrubbing down with water, removing rubbish/debris etc complete all as specified and as directed. |
| 36 | Material and labour for Rendering 10 mm thick in CM 1:3 on ceiling surfaces using water proofing compound @3% by weight of cement, finished even and smooth without using extra cement complete all as specified and as directed.Note: Water proofing compound shall be measured separately. |
| 37 | Material and labour for rendering 15 mm on fair faces of brick or concrete surfaces in CM 1:6, finished even and fair without using extra cement complete all as specified and directed. |
| 38 | Material and labour for 15 mm thick renderingon brick/concrete surfaces in two layers in CM 1:4, finishing coat of 5mm thick, finished even and smooth without using extra cement complete all as specified and as directed. |
| 39 | Material and labour for preparation of of new plastered/concrete surfaces of wall and applying two coats ofacrylic distemperof approved shade/tint over a coat of primer,over surface of wallall as specified and as directed. |
| 40 | Material and labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 41 | Material and labour for preparation of of new plastered/concrete surfaces of ceiling and applying two coats ofacrylic distemperof approved shade/tint over a coat of primer,over surface of wallall as specified and as directed. |
| 42 | Material and labour for complete removal of existing treatment on wall surfaces, preparation of old distempered and paintedsurfaces including washing, rubbing down and stopping by brooming down , scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of Distemper oil emulsion over a coat of primer on wall surfaces. |
| 43 | Material and labour for complete removal of existing treatment on wall surfaces, preparation of surfaces including removal of fungus growth if any, filling the cracks and applying two or more coats of 100% premium acrylic emulsion paint having VOC not less than 50 gm/lit and UV resistance as per IS 15489-2004, dust, alkali and fungal resistant, of approved shadewith silicon additives @ 1.43 lit/10Sqm over a coat of primer @ 0.9Lit per 10 Sqm complete all as specified and as directed. |
| 44 | Material and labour for complete removal of existing treatment on ceiling surfaces, preparation of old distempered and paintedsurfaces including washing, rubbing down and stopping by brooming down , scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of Distemper oil emulsion over a coat of primer on ceiling surfaces. |
| 45 | Taking down existing unserviceable water tank after disconnecting water supply line and Supply and fix Rotational moulded Polyetheylene Water Storage Tank 1000 Ltr capacity Triple Layer (Cylinderical verticle with closed top) including 20mm dia GI Medium Grade 450mm long overflow and wash out pipe each with all required fittings, Checknut, Stopper etc complete hoisted and fixed in position, including all incoming and outgoing connection of GI pipe complete and including 25mm PTMT Ball valves high pressure wiith epoxy coated aluminium rodand high density plastic ball screwed for iron pipe complete for 20mm dia pipe fixed on roof top complete all as specified and directed. |
| 46 | Taking up or down steel tubing 20 mm bore including connections, cleaning for refixing or removal to storeall as directed. |
| 47 | Taking up or down steel tubing /CPVC pipe 15 mm bore including connections, cleaning for refixing or removal to storeall as directed. |
| 48 | Supply and fixing galvanised steel water tubing medium grade 15 mm bore including all necessary fittings such as bends, L bows, short piece connections, backnuts, caps plugs, unions couplings, flanges, sockets etc,fixed to wall/floor/ceilingincluding necessary cutting/chauging in walls made of brick/concrete surface complete all as specified and as directed. |
| 49 | Supply and fixing galvanised steel water tubing medium grade 20 mm bore including all necessary fittings such as bends, L bows, short piece connections, backnuts, caps plugs, unions couplings, flanges, sockets etc,fixed to wall/floor/ceilingincluding necessary cutting/chauging in walls made of brick/concrete surface complete all as specified and as directed. |
| 50 | Supply and fix in repairs 15mm dia bib taps cast copper alloy fancy type chromium plated with crutch or butterfly handle screwed down , screwed for iron pipe or union complete all as specified and directed. |
| 51 | Supply and fix in repairs 2 way angle valves/2 in 1 angle cock, 15mm bore,quarter turn with wall flange, chromium plated, screwed down, high pressure with crutch or butterfly handle and fixed complete all as specified and directed. |
| 52 | Supply and fix in repairs stainless steel grating 125 mm dia with waste pipe holecomplete all as specified and as directed. |
| 53 | Supply and fix in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 20 mm bore complete all as specified and directed. |
| 54 | Supply and fixing in repairs vitreous China wash hand basin, white (flat back or angle back type or counter top) of size 630X450mm including 32mm brass chromium plated waste fitting, a pair of cast iron bracket duly painted including cutting and pinning in ends making good disturbed surfaces in CM 1:3 excluding pillar tap but chain , plug and porcelain stopper, brackets etc all as specified and as directed. |
| 55 | Supply and fix in repair 15mm dia pillar tap, cast copper alloy, chromium plated, fancy type, with capstan head screwed down high pressure with or without lettered hot or cold with long screw shank and fly nutt screw foriron pipeMake: CERA /Parryware/Hindware |
| 56 | Supply and fix in repair 10 Ltr capacity PVC valveless, syphonic action type, flushing cistern low level, white, with inlet ball valve, float and handle including brackets, flushing pipe, 450mm long PVC Connection and connection to trap, and to flushing and making good to floor complete all as specified . |
| 57 | Supply and fixing in repairs flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cisterncomplete all as specified and directed. |
| 58 | Supply and fixing in repairsVitrious China squatting pan \" Orissa\"pattern of size 580 mm x 440 mm white with integral foot rest excluding flushing cistern and flush pipe including P or S trap making good the floor to match with existing floor complete all as specified and as directed. |
| 59 | Supply and fix in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 60 | Supply and Fix in repairs vitreous china wash down water closet Pedastal patternwhite (excluding flushing cistren ) including trap set, seat cover and fixing of flushing cistern, brackets, flushing pipeetc, etc. with\"P\" or \"S\" trap, making good the floor to match with existing floor complete all as specified and as directed. |
| 61 | Supply and fixin repairs stop valves/angle cock, 15mm bore, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 62 | Supply and fixing in repairs 6 mm thick bevelled edge looking mirror of size 600 x 450 mm mounted on 6 mm thick AC Building board or commercial plywood/hard board backing andfixed to wooden plugs with CP Screws and cup washersall as specified and as directed. |
| 63 | Supply and fixing for Soap Dish, Single, as Approved, fixing with Brass Chromium Plated Screws including Taking down unserviceable Soap Dish of any description, complete as all specified and directed. |
| 64 | Supply and fixing in repairs Towel rails tubular brass chromium plated 20 mm dia \"D\" type 60 cm long between flanges complete all as specified and directed. |
| 65 | Supply and fixSheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and as directed. |
| 66 | Supply and fixing in repairsPVC waste pipe 32mm dia with 40mm dia reducer, 90cm long for WHB/urinal outlet with 4 Nos screws for fixing pipes, complete all as specified and directed. |
| 67 | Supply and fixingVitreous China full stall urinal bowl type (back or corner wall type), white , of size 580mm x 380mm x 350mm complete with chromium plated waste fittings including providing and fixing plugs,bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing arround urinal back in cement, (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) all as specified and as directed. |
| 68 | Supply and fixing urinal partition , vitreous china, white,of size 310mmx770mmx50mm all as specified and as directed. |
| 69 | Supply and fixin repairs waste coupling of PTMT 32 mm size (half or full threaded) suitable for urinals/ WHB/Sink etc (Minimum weight 32 mm - 45 gms) all as specified and as directed. |
| 70 | S&F in repair PVC (SWR) pipes 110 mm dia. single socketed, in any length with rubber ring joints, fixed to wall and roof as in rain water gutters including cutting of PVC pipes in half complete all as specified and as directed. |
| 71 | S&F PVC (SWR) pipes 75 mm dia. single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and as directed. |
| 72 | S&F PVC (SWR) bend 75 mm dia with access door complete all as specified and as directed. |
| 73 | Supply and fix PVC (SWR) floor trap , plain with grating including jointing with solvent cement 75mm bore complete all as specified and as directed. |
| 74 | S&F PVC (SWR) junction single 110 mm bore, (single T) equal or unequal with access door complete all as specified and as directed. |
| 75 | Taking down existing roof treatment of any description and removing the debris materials to a distance exceeding 100mtr but not exceeding 250 mtr all as directed by Engineer in Charge. |
| 76 | Demolition cement concrete (unreinforced) to Roofs, floors (other than ground floors), beams, staircases, landing, chajjas, and similar suspended work complete all as specified and as directed by the Engineer-in-Charge. |
| 77 | Material and labour for 40mm thick plain cement concrete 1:2:4 type B0using 12.5 mm graded stone aggregate as in as in leveling course including use of form work as necessary completeall as specified and as directed. |
| 78 | M& L for preparation of naked roof surface by cleaning dust & dirt and applying 10 mm thick rendering in cm(1:3) mixed water proofing compound @ 3% by weight of cement or as per manufactures instructions, finished even and smooth surface all as specified and directed by Engineer in Charge. Note - WPC shall be measured & Paid separately. |
| 79 | Supply only integral water proofing compound all as specified and as directed. |
| 80 | M&L for water proofing treatment to RCC roof slab including parapet comprising with the following course of treatment/ specifications from bottom to top:- (a) Applying bituminous primer @ 0.40 ltrs per sqm over plastered surfacesof roof including parapet surfaces.(b) One layer of APP based polymeric membranes of approved manufacturers, 3 mm thick, weight not less than 3.6 kg/sqm, reinforced with non woolen polyester fabric or weight not less than 150 gms/sqm. Polymeric membrane shall be taken to a height of 60 cm (minimum) and then inserted inside the groove of parapet walls and shall be finished by a membrane flashing.Note: (i) Laying of APP based membranes shall be done by torch on method or as per manufacturer\"s instructions.(ii) A minimum overlap of 100 mm and 75 mm should be made in the end sides of polymeric membranes respectively and sealed all overlaps and joints as manufacturer\"s instructions.(c) Applying two coats of Aluminium paint on top of APP membranes. |
| 81 | Taking down of old Main switches/MCB DBs incl MCBs etc.removing material to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls , floors etc. |
| 82 | M&L point wiring complete with 1.5 Sqm sincle core PVC insulated unsheathed FRLS cable 1100 volts grade (ISI marked) with multi stranded copper conductor drawn through and including non-metallic rigid PVC medium grade conduit and conduit accessories (ISI) marked concealed in wall/fixed to roof, ceiling etc and incl provn of 1.5 sqmm PVC insulated multistranded unsheathed copper conductor cable FRLS (ISI marked) as earth continuity conductor, fabricated sunken terminal box made out of 1.60 mm thick sheet steel duly painted concealed in walls, with 3mm thick bakelite/PVC sheet ISI marked top cover with brass/chromium plated screws and cup washers for housing switches, socket outlets, fan regulators etc, all as specified and as directed for the following :- |
| 83 | One light point or one light/fan/ exhaust fan point controlled by one switch with cables 1.5 sqmm size |
| 84 | One socket point controlled by one switch on same board |
| 85 | (c) one 3pin socket outlet 5 Ampspoint controlled by one switch on Independent board. |
| 86 | M&L for concealed point wiring with two single core PVC insulated, unsheathed, FRLS multistranded unsheathed copper conductor cable of size 2.5 sqmm and one single core PVC insulated unsheathed FRLS stranded copper conductor of size 2.5 sqmm green in colour as earth lead through and including PVC rigid conduit( medium grade) with all fittings & accessories ISI marked including provn ofMS sunken boxes of appropriate size & thickness fixed flush to wall for 15/16 A switch-socket point on independent board complete. (Note:- Cutting chases and making good of disturbed surfaces with measured and paid separately) |
| 87 | S&F switch piano flush type AC 230 Volts 6 Amps single pole one way complete all specified and directed |
| 88 | S & F celing rose surface bakelite 2/3 terminals complete all as specified and directed. |
| 89 | S&F socket outlet 3 pin,6 Amps on same board AC 230 volts flush type complete all as specified and directed. |
| 90 | Supply & fix switch socket combination outlet, 6 pin, 6 Amps, multipurpose, flush, non shutter, non inter locking type, 230 volt flushtype, white/ivory finish with fixing hole complete all as specified and directed by Engineer in charge. |
| 91 | Supply & fix switch socket combination, 6 pin, 15/16Amps, multipurpose , flush, shutter type, 230 volt flushtype, white/ivory finish with fixing hole complete all as specified and directed by Engineer in charge. |
| 92 | Supply & fix electronic fan regulator, stepped type, 120 w, 240volts 50Hz, 1/2 Module complete all as specified and as directed. |
| 93 | Supply and fixing in repairs 20W LED pride Essential Batten 6500k,220V, White, Decorative ultra slim round profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. all as specified and as directed. Make-Havells Model No. LHEXAWP7IN1W020 or equivalent in Philips/Bajaj/Crompton. |
| 94 | Supply and fixing Austra LED Batten light fitting mirror type 6500k,220V AC, smart contemporary design with driver including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. all as specified and as directed. Make-Havells Model No. LHFAAYPBNU1W020 or equivalent in Philips/Bajaj/Crompton. |
| 95 | Supply and fixing LED security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete |
| 96 | Supply and fix in replacement MCB SP 6-32 amp rating 240V, 10KA \"B\" curve miniature circuit breaker (MCB) of single pole in the MCB DB,IP 20 transparent lebel holder fully insulated safety shutters suitable for cable up to 35 Sqmm cross sectional area complete including suitable size copper Lugs complete all as specified and directed.Make: Indo Asian/ L&T/Crompton Greaves/Havells |
| 97 | Supply and fix in replacement MCB SPN 32 amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of single pole in the MCB DB complete with connection testing and commissioning complete all as specified and directed.Make: Indo Asian/ L&T/Crompton Greaves/Havells |
| 98 | Supply and fix Flame proof Distribution board (DB) made out of sheet metal enclosure (CRCA sheet), dust and vermin proof, SPN 4 way with 5000 Amps rated copper bus bar double doorprotection, neutral bar,earth bar, single pole and neutral 240 volts, MCBs used as incommer flush to wall complete all as specified and as directed. |
| 99 | Supply and fix Distribution board (DB) made out of sheet metal enclosure (CRCA sheet), dust and vermin proof, TPN 4 way with 200 Amps rated copper bus bar double doorprotection, neutral bar,earth bar, single pole and neutral 415 volts, MCBs used as incommerDouble door, flush to wall complete all as specified and directed . |
| 100 | Supply and fixing in replacement 380mm sweep exhaust fan made of steel body AC single phase, voltage 230V ,50Hz, copper winding , including blades, frames and louvers, complete all as specified and directed by Engineer-in-Charge. |
| 101 | Supply & fixing replacement of Exhaust Fan of size 250 mm sweep with louvers, with plastic body AC 230 V, 50 Hz, and connecting to ceiling rose terminals with 23/.0076 flexible cable and making good the disturbed surface to match with existing finishes complete all specified and directed. |
| 102 | Material and labour for Sub main wiring using two runs of single corePVC insulated cable (FRLS) 4 sqmm copper conductor multi stranded and one run of 4 sqmm copper conductor insulated cable (FRLS)using as earth wire drawn through and including suitable sizerigid non-metallic PVC conduit, complete all as specified and directed. Note-3 run of 4 sqmm PVC copper wire and One run of PVC conduit shall be measured and paid as oneunit. |
| 103 | Material and labour for Sub main wiring using two runs of single corePVC insulated cable (FRLS) 10 sqmm copper conductor multi stranded and one run of 10 sqmm copper conductor insulated cable (FRLS)using as earth wire drawn through and including suitable sizerigid non-metallic PVC conduit, complete all as specified and directed. Note-3 run of 10 sqmm PVC copper wire and One run of PVC conduit shall be measured and paid as oneunit. |
| 104 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc, and cutting chases for concealed conduit wiring and making good, cutting not exc 10 cm girth,& as per site reqirement. complete all as specified and directed by Engineer in charge. |
| 105 | Cutting openings, through brick walls built in cement mortar for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m, complete all as specified and directed by Engineer in charge. |
| 106 | Material and labour for preparation ofnew plastered/concrete surfaces of walls and applying two coats ofacrylic distemperof approved shade/tint over a coat of primer,over 3mm thick wall care putty finish to achieveuniform smooth surface of wallall as specified and as directed. |
| 107 | Excavation in trenches in soft/loose soil not exceeding 1.5 mtrwide and not exceeding 1.5 meter in depth for taking out and laying UG cable and getting out, excavated earth, forming bottomsurfaces to required level complete all as specified and directed. |
| 108 | Returning filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and as directed. |
| 109 | Removing excavated material (soil) n.exc 50 m and depositing where as directed at a level n.exc 1.5 m above the starting point complete all as specified and as directed. |
| 110 | Supply, laying or passing through pipe LT, XLPE insulated, galvanised steel stripor wire armoured electric power cable conforming to IS:7098 (Pt-I)-1988, heavy duty with stranded aluminium conductor 1100 Volts grade of size 6 Sqmm 2 core with necessary fixing arrangements such as lugs, glands and terminal etc including connecting/testing after taking out unserviceable LT UG cable from trenches/ polecomplete all as specified and directed.NOTE: Excavation, earth work shall be measured and paid for separately. |
| 111 | Supply, laying or passing through pipe LT, XLPE insulated, galvanised steel stripor wire armoured electric power cable conforming to IS:7098 (Pt-I)-1988, heavy duty with stranded aluminium conductor 1100 Volts grade of size 16 Sqmm 4 core with necessary fixing arrangements such as lugs, glands and terminal etc including connecting/testing after taking out unserviceable LT UG cable from trenches/ polecomplete all as specified and directed.NOTE: Excavation, earth work shall be measured and paid for separately. |
| 112 | Supply and laying double wall corrugated pipe (DWC) conforming to IS 19430 Part - I of size 50 mm outer dia and 38 mm inner dia complete all as specified and as directed |
| 113 | Earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth wire 4.0mm dia by means ofnut, bolts, check nuts and washers of galvanised iron or steel and provision of charcoal dust and common salt packed all around the earth plate including necessary excavation and earth work in any type of soil and testing complete all as specified and directed and shown in electrical plate number 3 of MES SSR part-I(2009)Note: Unit rate quoted shall be deemed to be included the following(a) Excavation and earth work for drilling hole for electrode in any type of Soil. (b) PCC pit in cement concrete 1:2:4 type B-1, Pre cast RCC cover with suitable handle 40 mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed(d) 40 mm nominal bore medium grade GI protection pipe 7.5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing. |
| 114 | Schedule of Credit (Minus) Rs.27412.00NOTE: Bidder shall insert credit amount of Rs. 27412.00 as ratein Green field under Col-13. |
