Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | SCHEDULE \"A\" PART-I : BOQ OF WORKS FOR B/R WORKS. |
| 2 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets, complete all as specified and as directed. |
| 3 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and as directed. |
| 4 | Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level), ncluding cleaning,removal and disposal of rubbish/ waste materials from premises, complete all as specified and as directed. |
| 5 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition), including cleaning, removal and disposal of rubbish/ waste materials from premises, complete all as specified and as directed. |
| 6 | Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) area not exceeding 1.50 Sqm each, complete all as specified and as directed. |
| 7 | Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) area exceeding 1.50 Sqm but not exceeding 4.0 Sqm each, complete all as specified and as directed. |
| 8 | Pre-painted galvalume aluminium zinc coating galvanised iron based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specifed and directed. |
| 9 | Pre-painted galvalume aluminium zinc coating galvanised iron based plain steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specifed and directed. |
| 10 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed. |
| 11 | Rolled mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS:1161-1979 grade St.-240, complete all as specified and as directed, complete all as specified and as directed. |
| 12 | Rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe-410 W (Gde E-250) quality B, complete all as specified and as directed. |
| 13 | Preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10cm width or girth including and applying two coats of synthetic enamel paint over one coat of zinc chrome/ red oxide primer, complete all as specified and as directed. |
| 14 | Preparation of old painted steel surfaces of any description, over 10cm width or girth including and applying one coat of synthetic enamel paint, complete all as specified and as directed. |
| 15 | Anodised aluminium snap grid frame work for false ceiling, powder coated, comprising of aluminium Tee (weight of section not less than 280 gms/mtr) and aluminium angle (weight of section not less than 280 gms/mtr), grid size 605x605mm, includingHangers 6.0mm dia, galvanised iron (upto1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of galvanised iron flat 40x3 mm size 60mm long and expansion hold fasteners 12.50mm dia, 40mm long, complete all as specified and as directed. |
| 16 | Providing and fixing everest board 4mm thick, designer, in ceiling fixed as per manufacturer’s instructions, grid size 595x595mm, for false ceiling all as specified, complete all as specified and as directed. |
| 17 | Plain cement concrete M-7.50(1:4:8), type D-2 (using 40mm graded crushed stone aggregate), as mass concrete in foundation filling, complete all as specified and as directed. |
| 18 | Dismantaling of brickwork or stone/ boulder masonry, including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles built in cement mortar or cement lime mortar of any description, complete all as specified and as directed. |
| 19 | Brickwork with subclass ‘B’ bricks, straight or curved on plan exceeding 6.0 mtr mean radius built in cement mortar 1:4, complete all as specified and as directed. |
| 20 | Rendering 15mm thick on fair faces of on brick work or concrete surfaces, in cement mortar 1:6, rendering is to be finished even and smooth (without using extra cement), complete all as specified and as directed. |
| 21 | Rendering 15mm thick on fair faces of on brick work or concrete surfaces, in cement mortar 1:4, rendering is to be finished even and smooth (without using extra cement), complete all as specified and as directed. |
| 22 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed. |
| 23 | Vitrified Ceramic tiles of light shade, 10mm thick (square/ rectangular) polished, non-skid, area of each tiles not exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, and including laid over screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6, complete all as specified and as directed. |
| 24 | Vitrified Ceramic tiles of light shade, 10mm thick (square/ rectangular) polished, non skidarea of each tile exceeding 0.18 Per Square Metre but not exceeding 0.38 Per Square Metre, in skirting or in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including fixed over screed bed or bedding layer of mortar 10mm thick in cement mortar 1:4, complete all as specified and as directed. |
| 25 | Glazed ceramic coloored tiles in vertical surface/ dado, size 300x200x6/7mm, 300x450x6/7mm, 350x250x6/7mm, or 450x350x6/7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match, the shade/ colour of tilesincluding rendering of 10mm thick in cement mortar 1:4 as backing of tiles, complete all as specified and as directed. |
| 26 | Curtain rod, 20mm dia, mild steel, fancy type, any colour coated with fixing and inlcuing end knobs, fixing brackets, stops, round rings to hold the curtain, fixing with wall plugs and screws, complete all as specified and as directed. |
| 27 | Formwork, use and waste type, as in sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc., to get fair finish surfaces of concrete, complete all as specified and as directed. |
| 28 | Formwork, use and waste type, as insoffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), to get fair finish surfaces of concrete, complete all as specified and as directed. |
| 29 | Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 30 | Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, including binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips, complete all as specified and directed. |
| 31 | Reinforced cement concrete M-15(1:2:4), type B-1, (using 20mm graded crushed stone aggregate), nominal mix, as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and as directed. |
| 32 | Pressed steel frames for doors of size 125x60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed. |
| 33 | Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed.Note: Stainless steel butt hinges and necessary stainless steel screws shall be paid separately. |
| 34 | Factory made solid panel PVC door shutter 30mm thick, wood plastic composite (WPC) moulded gauged shutter with wire mesh in any number of divisions with brown wood grain texture including stainless steel wire mesh fixed with 15mmx15mm square tube in side rails with screwing 8mmx28mm heat metal zinc coated screws which can be refix again after replacement of stainless wire mesh as per requirement, complete all as specified and as directed. |
| 35 | Butt hinges, size 100mm, medium weight, cold rolled mild steel, and fixed, complete all as specified and as directed. |
| 36 | Butt hinges, size 100mm, medium weight, stainless steel, and fixed, complete all as specified and as directed. |
| 37 | Aluminium anodised, barrel tower bolts of extruded Section, size 150mm long and fixed, complete all as specified and as directed. |
| 38 | Aluminium alloy, anodised, sliding door bolt, size 300mm, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed. |
| 39 | Extruded aluminium alloy handles, fabricated type, anodised, size 150mm, complete all as specified and as directed. |
| 40 | Providing and fixing of powder coated aluminium three track sliding glazed window manufactured with approved aluminium section with three sliding shutter each shutter width one half of the length of window with the comprising the follow specifications and making good the adjacent surfaces of walls after fixing :-(i) Window’s aluminium frame of cross section 101mmx40mmx 1.50mm thick.(ii) Three way track for sliding shutters of cross sections 91.80mmx31.75mmx1.10mm thick.(iii) Sliding shutter frame of cross section 40mmx18mmx1.0mm.(iv) Aluminium glazing strip size 18.20mmx16.66mm.(v) 4.0mm thick float glass superior quality for both leafs.(vi) Rubber gasket/ beading for fixing glass panes.(vii) Locking cleats per shutter including rollers 01 Nos.(viii) 02 Nos. sliding rollers in each leaf.(ix) Fixing screws for frame with wall 06 per window.(x) Aluminium wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm for each shutter.(xi) Aluminium grill not less than 1.30 Kg/ Sqm weight along with border cleat. |
| 41 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc., complete all as specified and as directed. |
| 42 | Preparation of new plastered surfaces of internal walls by complete removal of existing spots with mechanical means (sander) along with dust extraction system for cleaning the surfaces and applying one coat of wall care putty 3.0mm thick for making the surfaces smooth by grinding or rubbing with mechanical means, apply two coats of acrylic distemper with roller of spray machine/ roller over one coat of primer, complete all as specified and as directed.Note: Cost of materials, tools and plants as required, shall be included in the quoted rate. |
| 43 | Preparation of old decorated surfaces of external walls by complete removal of existing treatment with mechanical means (sander) and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm by using roller/ spray machine, complete all as specified and as directed. |
| 44 | Preparation of new plastered surfaces of walls and applying two coats of cement paint over one coat of priming plastered and other surfaces with alkali resistant priming paint, complete all as specified and as directed. |
| 45 | Chequered cement concrete coloured tiles, pre-polished, size 300mmx300mmx25mm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over 20mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and as directed. |
| 46 | Plain cement concrete M-7.50(1:4:8), type D-2 (using 40mm graded crushed stone aggregate), 100mm thick, as in sub base, finish even and smooth without using extra cement, complete all as specified and as directed. |
| 47 | Machine pressed precast concrete interlocking paver block 60mm thick, M-35 Grade any shape and size casted in plastic moulds and compacted on vibratory table confirming to IS: 15658-2006 with grey cement and pigment, laid over 25mm thick sand cushioning, complete all as specified and directed. |
| 48 | Sheet glass, 3.0mm thick, tinted, ordinary quality and glazing with oil putty in square exceeding 0.50 Sqm in each pane, in square or any size, complete all as specified and as directed. |
| 49 | Steel ventilator with top hung shutter including hinges, steel peg stay, complete, complete all as specified and as directed. |
| 50 | Plain cement concrete M-7.50(1:4:8), type D-2 (using 40mm crushed stone aggregates) as in bed to drain pipes of 100mm bore including packing under, and haunching against the sides of pipes after they are laid and tested; after laying, complete all as specified and as directed. |
| 51 | Solid PVC Door Frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube, supplyingand fixing in opening as per specification and drawing, including making good to disturbed surface of walls, complete all as specified and as directed. |
| 52 | Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tubes for top and bottom rails. Mild steel frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/ sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing in SSR, complete all as specified and as directed. |
| 53 | Butt hinges, size 75mm, medium weight, cold rolled mild steel, and fixed, complete all as specified and as directed. |
| 54 | Extruded aluminium alloy handles, fabricated type, anodised, size 125mm, complete all as specified and as directed. |
| 55 | Aluminium anodised, barrel tower bolts of extruded Section, size 100mm long and fixed, complete all as specified and as directed. |
| 56 | Tubular towel rail, 20mm dia, D-type, 60cm long between flanges, brass chromium plated, fancy type, including end brackets, fixing in repairs, complete all as specified and as directed. |
| 57 | Soap dish, any type, fixed to plugs with chromium plated brass screws, complete all as specified and as directed. |
| 58 | Western style EWC, all-in-one, white colour with soft close seat cover including cistern, floor mounted, complete all as per price list/ catalogue of following makes:Make: Cat Part No- 20122 (S-22)/ 20127(P-18) (Aspire) of Hindware or equivalent in Jaquar/ Parryware. |
| 59 | Toilet paper holder with flat recessed type stainless steel, fixing in repairs, complete all as specified and directed. |
| 60 | Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, for 15mm bore pipe, fixing in repair, complete all as specified and as directed. |
| 61 | PVC (SWR) floor trap, 75mm diameter of outlet,plain with grating including jointing with adhesive, complete all as specified and as directed. |
| 62 | Taking up or down steel tubing of 15mm bore pipe and connections, including cleaning for re-fixing or removal to store, complete all as specified and as directed. |
| 63 | Taking up or down steel tubing of 20mm bore pipe and connections, including cleaning for re-fixing or removal to store, complete all as specified and as directed. |
| 64 | Taking up or down steel tubing of 25mm bore pipe and connections, including cleaning for re-fixing or removal to store, complete all as specified and as directed. |
| 65 | Tubes, \"medium grade\" galvanised, 15mm bore, ISI markedwith all fitting such as bends, tees, elbows, unions, short pieces, connectors, back nuts, etc and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed.Note: Cost of cutting/ chasing for pipe line making concealed in surfaces shall be deemed included in quoted rates. |
| 66 | Tubes, \"medium grade\" galvanised, 20mm bore, ISI markedwith all fitting such as bends, tees, elbows, unions, short pieces, connectors, back nuts, etc and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed.Note: Cost of cutting/ chasing for pipe line making concealed in surfaces shall be deemed included in quoted rates. |
| 67 | Tubes, \"medium grade\" galvanised, 25mm bore, ISI markedwith all fitting such as bends, tees, elbows, unions, short pieces, connectors, back nuts, etc and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed.Note: Cost of cutting/ chasing for pipe line making concealed in surfaces shall be deemed included in quoted rates. |
| 68 | Wall mixer 3-in-1 with L-bend pipe including overhead shower and hand shower, made of stainless steel or chromium plated metals, complete all as per price list/ catalogue of following makes:Make: Cat Part No- F690022 of Hindware or equivalent in Jaquar/ Parryware. |
| 69 | Oval shaped wash basin of white colour, fitted over granite slab of selected cover, complete all as per price list/ catalogue of following makes:Make: Cat Part No- 10049 of Hindware or equivalent in Jaquar/ Parryware. |
| 70 | Single lever basin mixer without popup waste, made of stainless steel or chromium plated metals, complete all as per price list/ catalogue of following makes:Make: Cat Part No- F400009 of Hindware or equivalent in Jaquar/ Parryware. |
| 71 | Main mirror vanity cabinet, with basin Bib taps, 2-in-1, stainless, complete all as per price list/ catalogue of following makes:Make: Cat Part No- C896F7C, C896D7C and C896E1C of Parryware or equivalent in Jaquar/ Hindware. |
| 72 | Bib taps, 2-in-1, stainless, complete all as per price list/ catalogue of following makes:Make: Cat Part No- F340005GCP of Hindware or equivalent in Jaquar/ Parryware. |
| 73 | Glass shelf, fixing with rust free screws and PVS plugs in walls, complete all as per price list/ catalogue of following makes:Make: Cat Part No- F880010 of Hindware or equivalent in Jaquar/ Parryware. |
| 74 | Ultra-thin stainless rain shower with 225mm shower arm, single flow, complete all as per price list/ catalogue of following makes:Make: Cat Part No- F160142 and 160143 of Hindware or equivalent in Jaquar/ Parryware. |
| 75 | Granite (of any type) work (table rubbed and polished), 20mm thick, as in steps, jambs, pillars, window cills, cooking plat forms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, and including laid over screed bed or bedding layer 20mm thick in cement mortar 1:6, complete all as specified and as directed. |
| 76 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specified and as directed. |
| 77 | PVC (SWR) pipes, 110mm bore, single socketed, capacity not, less then 4.50 Kgf/Sqcm, in any length fixing with adhesive/ solvent cement, laid in trenches or in floors, complete all as specified and as directed. |
| 78 | PVC (SWR) bends of 110mm bore, pressure capacity not less than 4.50 Kgf/Sqcm, any radius, fixing with adhesive, complete all as specified and as directed. |
| 79 | PVC (SWR) bends of 75mm bore, pressure capacity not less than 4.50 Kgf/Sqcm, any radius, fixing with adhesive, complete all as specified and as directed. |
| 80 | Dismantling water tanks capacity exceeding 500 Litres but not exceeding 1000 Litres and removing to store, complete all as specified and directed. |
| 81 | Rotational moulded polyethylene water storage tanks of 1000 liters capacity, (cylindrical vertical with closed top) with lid, hoisted and fixed in position all as specified in SSR Part-I including ball valves high pressure of PTMT with epoxy coated aluminium rod and highdensity plastic ball screwed for iron pipe and fixed for 20mm bore pipe, fixing in repairs, complete all as specified and as directed. |
| 82 | PVC (SWR) pipes, 110mm bore, single socketed, capacity not, less then 4.50 Kgf/Sqcm, in any length fixing with adhesive/ solvent cement, fixed to walls, complete all as specified and as directed. |
| 83 | Extruded aluminium alloy handles, fabricated type, anodised, size 100mm, complete all as specified and as directed. |
| 84 | Salt-glazed stoneware gully traps, size of gully traps 150mmx150mm, square or round mouthed, type \"P\", complete all as specified and as directed. |
| 85 | Hardcore of broken stone or boulders gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface, complete all as specified and as directed. |
| 86 | Plain cement concrete M-10(1:3:6), type C-1 (using 20mm graded crushed stone aggregate), 75mm thick, as in plinth protection, finish even and smooth without using extra cement, complete all as specified and as directed. |
| 87 | Preparation of old/ decorated plastered or unplastered surfaces of walls including washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of distemper oil emulsion, complete all as specified and as directed. |
| 88 | Preparation of old plastered or unplastered surfaces of walls and applying one coat of colour washing on prepared surfaces, complete all as specified and as directed. |
| 89 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc, complete all as specified and as directed. |
| 90 | Preparation of old plastered or unplastered surfaces of walls and applying one coat of white washing on prepared surfaces, complete all as specified and as directed. |
| 91 | Non-skid, coloured, ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 Per Square Metre but not exceeding 0.18 Per Square Metre, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including laid over screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6, complete all as specified and as directed. |
| 92 | Bevelled edge mirror, size 600mmx450mm, selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, fixing in repairs, complete all as specified and as directed. |
| 93 | Vitreous China squatting pan, ‘Orissa’ pattern, size 580x440mm white, with integral foot rests (excluding flushing cistern and flush pipe) but including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to dismantled floor in cement concrete M-15 (1:2:4), type B-1 (using 20mm graded crushed stone aggregates), fixing in repair, complete all as specified and as directed. |
| 94 | Bib taps, cast copper alloy, chromium plated, fancy type, long body with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed for 15mm bore pipe, fixing in repairs, complete all as specified and as directed. |
| 95 | PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, capacity 10.0 litres and making good to dismantled/ damaged floor/ surfaces, fixing in repairs, complete all as specified and as directed. |
| 96 | Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples, complete all as specified and as directed. |
| 97 | Brass chromium plated shower rose 125mm size, with or without swivel joints, any size, including fixing to steel pipe or union for 15mm bore pipe, complete all as specified and as directed. |
| 98 | Vitreous China Urinal, half stall type, white, with grating and union for discharge pipe (excluding flushing cistern and flush pipe but including of waste pipe), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing flush pipe, grating and union for discharge pipe, fixing in repairs, complete all as specified and as directed. |
| 99 | Aluminium alloy, anodised, sliding door bolt, size 150mm, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed. |
| 100 | Preparation of new or previously untreated wood or wooden surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and as directed. |
| 101 | Flush shutters, 35mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete al as specified and as directed. |
| 102 | Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar of internal dia of pipe 100mm, complete all as specified and as directed. |
| 103 | PVC (SWR) pipes, 75mm bore, single socketed, capacity not, less then 4.50 Kgf/Sqcm, in any length fixing with adhesive/ solvent cement, laid in trenches or in floors, complete all as specified and as directed. |
| 104 | PVC (SWR) vent cowl of 75mm bore pipe, complete all as specified and as directed. |
| 105 | Grating doom, chromium plated, size 100mm dia, complete all as specified and as directed. |
| 106 | Plain cement concrete M-10(1:3:6), type C-2 (using 40mm crushed stone aggregates) as in bed to drain pipes of 100mm bore including packing under, and haunching against the sides of pipes after they are laid and tested; after laying, complete all as specified and as directed. |
| 107 | PVC connections 15mm size with brass nuts, of length 450mm, fixing in repairs, complete all as specified and as directed. |
| 108 | Angle/ Stop valves, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm bore pipe, fixing in repairs, complete all as specified and as directed. |
| 109 | SCHEDULE \"A\" PART-II : BOQ OF WORKS FOR E/M WORKS. |
| 110 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc, complete all as specified and as directed. |
| 111 | Point wiring (in new concealed/ exposed conduits to surfaces as required at site) for one light/ fan/ bell point controlled by one switch with 1.50 Sqmm, PVC insulated, unsheathed, single core, multi-stranded, copper conductor cable, FRLS, 1100 Volts, using colour coding, drawn in and including any type of new conduit, of any size/ dia including all accessories concealed by chasing/ cutting or fixed with PVC plug and mild steel screws in the surface of walls/ floors/ ceilings and making good the disturbed surface matching to existing descriptions/ specifications, with and including sunken type pressed steel/ welded mild steel terminal box 1.20mm thick coated and including FRLS PVC green insulated unsheathed 1.50 Sqmm copper earth continuity wire connected to earth dolly, complete all as specified and as directed.Note: Cost of modular boxes, modular cover plates and different types of modules including anti-corrosive screws shall be deemed included in quoted rate. |
| 112 | Description all as serial item No- 111.00 here-in-before but for one 3- pin, 5/ 6-Amps, socket outlet on same board. |
| 113 | Description all as serial item No- 111.00 here-in-before but for one 3- pin, 5/ 6-Amps, socket outlet on independent board. |
| 114 | Modular switch piano, single pole, one way, 5/ 6 Amps, 1-module, complete all as specified and as directed. |
| 115 | Modular socket outlet, 2-in-1, 3-pin, 5/ 6-Amps, 2-module, complete all as specified and as directed. |
| 116 | Modular switch piano, single pole, one way, 15/ 16 Amps, 1-module, complete all as specified and as directed. |
| 117 | Modular Socket 6Amps/ 16Amps, 2/3-pin combined, 2-module, complete all as specified and as directed. |
| 118 | Modular white cover plate with frame, 3-module including metal flush box, complete all as specified and as directed |
| 119 | Modular white cover plate with frame, 6-module including metal flush box, complete all as specified and as directed |
| 120 | Modular white cover plate with frame, 8-module including metal flush box, complete all as specified and as directed |
| 121 | Ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body, size 65mmx25mm dia, complete all as specified and as directed. |
| 122 | Point wiring (in new concealed conduits to surfaces as required at site) for 3-pin, 15/ 16 Amps, switch socket combination on independent board with 4.0 Sqmm, PVC insulated, unsheathed, single core, multi-stranded, copper conductor cable, FRLS, 1100 Volts, using colour coding, drawn in and including any type of conduit, any size/ dia including all accessories concealed by chasing/ cutting or fixed with PVC plug and mild steel screws on the surface of walls/ floors/ ceilings and making good the disturbed surface matching to existing descriptions/ specifications, with and including sunken type pressed steel/ welded mild steel terminal box 1.20mm thick coated with anti corrosive paint with bakelite laminated sheet top cover 3.0mm thick and including FRLS PVC green insulated unsheathed 4.0 Sqmm copper earth continuity wire connected to earth dolly, complete all as specified and as directed.Note: Cost of modular boxes, modular cover plates and different types of modules including anti-corrosive screws shall be deemed included in quoted rate. |
| 123 | Fan regulator, electronic, step type, modular regulator, 120 Watt, 2-module, 240 Volts, single phase, complete all as specified and as directed. |
| 124 | Sheet metal enclosures for Triple Pole and Neutral distribution boxes with double door glazed for incorporating MCBs, IP-65, 4-way with 200 amps rated busbar, 240 volts, as per IS-8623, fixing in repairs, complete all as specified and as directed. |
| 125 | Sheet metal enclosures for Single Pole and Neutral distribution boxes with double door glazed for incorporating MCBs, IP-65, 12-way with 200 amps rated busbar, 240 volts, as per IS-8623, fixing in repairs, complete all as specified and as directed. |
| 126 | Sheet metal enclosures for Single Pole and Neutral distribution boxes with double door glazed for incorporating MCBs, IP-65, 4-way with 200 amps rated busbar, 240 volts, as per IS-8623, fixing in repairs, complete all as specified and as directed. |
| 127 | MCB, single pole, 6 to 32 Amps, 240 Volts, 50 Hz, \"C\" curve including necessary incoming and out going electric connection with suitable size of copper lugs, fixing in repairs, complete all as specified and as directed. |
| 128 | MCB, single pole and neutral, 32 Amps, 240 volts, 50 Hz, \"C\" curve including necessary incoming and out going electric connection with suitable size of copper lugs, fixing in repairs, complete all as specified and as directed. |
| 129 | MCB, single pole and neutral, 40 Amps, 240 volts, 50 Hz, \"C\" curve including necessary incoming and out going electric connection with suitable size of copper lugs, fixing in repairs, complete all as specified and as directed. |
| 130 | MCB, single pole and neutral, 63 Amps, 240 volts, 50 Hz, \"C\" curve including necessary incoming and out going electric connection with suitable size of copper lugs, fixing in repairs, complete all as specified and as directed. |
| 131 | MCB, Triple pole and neutral, 40-100 Amps, 240 volts, 50 Hz, \"C\" curve including necessary incoming and out going electric connection with suitable size of copper lugs, fixing in repairs, complete all as specified and as directed. |
| 132 | XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 Volts grade, cross-sectional area 16.0 Sqmm, 4.0-core, laid in trenches or passing through pipes, including suitable lugs and accessories for making connections at both ends, complete all as specified and as directed. |
| 133 | Excavation in trenches, not exceeding 1.50mtr wide and not exceeding 1.50mtr in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 Sqm on plan and not exceeding 1.50 mtr in depth and getting out, in hard rocks, complete all as specified and as directed. |
| 134 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm, any type of soil, complete all as specified and as directed. |
| 135 | Removing excavated soil not exceeding 50mtr and depositing where directed at a level not exceeding 1.50 mtr above the starting point, complete all as specified and as directed. |
| 136 | Sand cushioning to protection of underground cables, laid 8 Cm before laying and 15 Cm after laying of cable, and punned to form an overall layer of 18 Cm thick, complete all as specified and directed.Note: Punned thickness shall be measured. |
| 137 | Sub main wiring(in new concealed/ exposed conduits to surfaces as required at site) for circuits/ submain wiring along with earth wire with two run of 6.0 Sqmm of fire resistance, PVC insulated copper conductor, single core cable, multi-stranded, FRLS, ISI marked, 1100 Volts grade and one run of 6.0 Sqmm, FRLS, PVC insulated copper conductor, single core cable, multi stranded, ISI marked, 1100 Volts grade as earth wire connected to earth terminal, using colour coding, drawn in and including any type of new conduit of any size/ dia including all accessories concealed by chasing/ cutting or fixed with PVC plug and mild steel screws on the surface of walls/ floors/ ceilings and making good the disturbed surface matching to existing descriptions/ specifications, complete all as specified and as directed.Note: Cost of all three run of wire and one run of conduit of required size will be included in quoted rate. |
| 138 | Sub main wiring(in new concealed/ exposed conduits to surfaces as required at site) for circuits/ submain wiring along with earth wire with two run of 4.0 Sqmm of fire resistance, PVC insulated copper conductor, single core cable, multi-stranded, FRLS, ISI marked, 1100 Volts grade and one run of 4.0 Sqmm, FRLS, PVC insulated copper conductor, single core cable, multi stranded, ISI marked, 1100 Volts grade as earth wire connected to earth terminal, using colour coding, drawn in and including any type of new conduit of any size/ dia including all accessories concealed by chasing/ cutting or fixed with PVC plug and mild steel screws on the surface of walls/ floors/ ceilings and making good the disturbed surface matching to existing descriptions/ specifications, complete all as specified and as directed.Note: Cost of all three run of wire and one run of conduit of required size will be included in quoted rate. |
| 139 | Taking down the existing geyser, of 25 litres capacity and any make/ design (Vertical or horizontal) for repair/ servicing by disconnecting the electric and water supply connections including cleaning the inner tank of geyser and re-installing after removing inner scaling, sludge and dirt including making electric and water supply connections and making good to the disturbed portion of the wall including testing and checking for proper functioning of thermostat, heating element, indication lamps, cable connections, 15 Amps socket and plug top, inlet and outlet water pipes etc, complete all as specified and as directed.Note: Cost of all required spare parts i.e. fasteners, nuts bolts, washers and requisite tools and plants along with cost of transportation to workshop and back to site, repairing, tools and plants shall be deemed included in quoted rate. |
| 140 | Taking down carefully existing exhaust fans of any make and sizes from wall, cleaning externally, checkingfor defects and overhauling complete by opening, cleaning of bearing, stator, rotor winding, providing new fresh proper grade lubricants oil/ grease after cleaning and re-assembling after replacement of split/ safety pins, mild steel nuts and bolts, including replacement of old existing flexible cord connected from ceiling rose to fan, re-fixing the same in existing position or any other location with flexible copper cable of cross size 0.75 Sqmm, 3-core, complete all as specified and as directed.Note: Cost of minor spare parts like, gun metal bush, capacitorsand cost of transportation to workshop and back to site, tools and plants shall be deemed included in quoted rate. |
| 141 | Sub class ‘B’ bricks, modular size, brick covering laid dry, flat, transversally along the length of cable on sand cushioning for mechanical protection of cable, with width equal to the length of the brick, complete all as specified and directed. |
| 142 | Taking down carefully existing ceiling fans of any make and sizes from ceilings, cleaning externally, checkingfor defects and overhauling complete by opening, cleaning of bearing, stator, rotor winding, providing new fresh proper grade lubricants oil/ grease after cleaning and re-assembling after replacement of split/ safety pins, mild steel nuts and bolts, including replacement of old existing flexible cord connected from ceiling rose to fan, re-fixing the same in existing position with flexible copper cable of cross size 0.75 Sqmm, 3-core, complete all as specified and as directed.Note: Cost of minor spare parts like, gun metal bush, capacitorsand cost of transportation to workshop and back to site, tools and plants shall be deemed included in quoted rate. |
| 143 | LED lights fitting wall surface mounted, 20 Watt, 220 Volt, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and as directed.Make: Havells cat part No-LUMILINEPLUSPROBS20WLED865SPCSSIND or equivalent in Philips/ Bajaj/ Crompton. |
| 144 | LED lights fitting wall surface mounted, 10 Watt, 220 Volt, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and as directed.Make: Havells cat part No-LUMILINEPLUSNEOBS10WLED865SPCSSINDS or equivalent in Philips/ Bajaj/ Crompton. |
| 145 | LED luminaire, size 600mmx600mm, 35/36 watt, 220 Volts, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders and LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of 1.50 Sqmm, 3-core, fixing in repairs, complete all as specified and as directed.Make: Havells cat part No- LHEBAEP6IW1W036 or equivalent in Phillips/ Bajaj/ Crompton. |
| 146 | LED street light fitting 35 Watt 230 Volt, AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.Make: Havells cat part No- Superb Street Light 30 W 6500 K IP65 or equivalent in Phillips/ Bajaj/ Crompton. |
| 147 | House service bracket, made with 2.50mtr long galvanised iron pipe 25mm dia medium grade, 120° bends including mild steel clamps of mild steel flat 50x6mm, hook, stay, nut, bolt and washer including painting with two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed. |
| 148 | Tubes, \"light grade\" galvanised, 40mm bore, ISI marked including all fitting such as bends, socket, connectors, back nuts, etc, laid in trenches or under floors, complete all as specified and as directed. |
| 149 | Supplying and fixing in replacement of 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor of 10.0 Sqmm, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1.0metre apart including 4.0mm suspension wire, one twin core cable flat or circular, complete all as specified and directed. |
| 150 | Earthing complete with galvanised iron earth plate electrode 600x600x6mm buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of earth plate not less than 1.5mtr below normal ground level, connected with galvanised iron wire, size 4.0mm dia as earth lead, by means of bolts, nuts, check nuts and washers of galvanized iron or steel complete with 20mm dia GI light grade protection pipe, 20mm dia GI medium grade watering pipe with funnel including charcoal, dust, salt, PCC M-15, type B-1 in pit with precast RCC M-15(1:2:4), type B-1 (using 20mm graded crushed stone aggregates) in cover reinforced with XPM not less than 4.0 Kg per Sqm, test pointetc. all as shown in electric plate No-3 of SSR Part-I (2009), complete with necessary earth work in any type of soil, removal to a distance not exceeding 50mtr, including testing on completion, complete all as specified and as directed by Engineer-In-Charge.Note: Earth pit chamber and RCC pit cover shall be painted with two coats of red synthetic enamel paint over one coat of primer including preparing of surfaces. |
| 151 | Amount of Schedule of credit as mentioned here-in-after shall be deducted from quoted amount. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
