|
| 1 | Dismantling of wall andceiling board (fibre, pulp, insulation etc) or insulation boards/ slabs/ blankets any thickness, including cover fillets etc complete all as specified and directed. |
| 2 | S&F of anodised aluminium snap grid frame work (605 x 605mm) for false ceiling complete all as specified and directed. |
| 3 | S&F of hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. |
| 4 | S&F ofPVC insulation panels of 40mm thickwith EPS stuck to 1mm PRINTEDPVC sheet on both sides of EPS suitably placed in false ceiling grid made of Aluminium/ G.I./ M.S. as per specification directed. |
| 5 | Taking down carefully copper/ aluminum point wiring of any type such as Concealed/ surface /batten/ casing and capping (light fan, socket or power) complete including fitting such as switches, ceiling roses, pendants, lamp/ bracket holders, sketch/ bulk head fittings, regulators, sockets, board outlets etc and making good the disturbed surfaces of walls, floor, ceiling etc for rewiring and repairs etc. |
| 6 | Taking down existing ceiling fans and re-fixing the same ceiling fan including provisioning of cable from celing rose to ceiling fan and spray painting of ceiling fan with two coats of synthetic enamal paint complete all as specified and directed. |
| 7 | Taking down of LED luminaire 600 mm x 600 mm, tube light fittingLED of any wattage and store for refixing,complete all as specified and directed. |
| 8 | Refixing only on original position of LED luminaire 600 mm x 600 mm 40 W , tube light fittingLED of 20W , where necessary and checking for smooth running testing complete all as specified and directed. |
| 9 | M&L for surface point wiring for light/fan controlled by one switch with 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS with andincluding stove enamelled steelconduit having thickness not less than 2 mm with all fittingsincluding 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS as earth continuity conductor connected to common earth dolly in and including cutting chiseling for concealed piping andmaking good disturbed surface areaand white wash/colour wash to matching with the existing colour and all as specified and directed.Note: 1. Colour coding is to bemaintained.(Ph- Red, N-Black, Half -Yellow, Earth- Green)Make of copper wire: Legrand/ Havells/ Polycab and PVC conduit Make: Precision, Plaza.2. Modular steel sunken boxes and switch sockets measured and paid separately. |
| 10 | All as per srl item No 9 above but for 3 pin 6 amps socket outlet on the sameboard with other switchall as specified and directed. |
| 11 | M&L for switch modular one way 6/10 amps 1 module completeall as specified and directed..Make: Anchor (Roma), Legrand, Havells or equivalent. |
| 12 | M&L for socket modular 6Amp 2/3 pin combined 2 module complete all as specified and directed. Make: Anchor (Roma), Legrand, Havells or equivalent. |
| 13 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. |
| 14 | Deduct Credit for Demolished/ Dismantled material Rs. (-) 25,640.00 (Minus) as listed in Schedule of Credit.Note 1:- Tenderers will not quote against this item being a tentative amount to be considered to arrive at the \"Contract Sum\"Note 2:- The tenderer must keep in mind when quoting rates against items having height 4 mts to 7 mts. Necessary scaffolding and saftey measures required during execution of work are including in this items. |
