|
| 1 | Earth work in excavation by mechanical means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like Not exceeding 10 Sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: within alead of 50 metres: |
| 2 | All kinds of soil @60% |
| 3 | Ordinary rock @20% |
| 4 | Hard rock ( blasting Prohibated) @20% |
| 5 | Dry stone pitching (any thickness) including cost of stones and carriage complete. On Horizontal |
| 6 | Providing and laying in position specified grade of cement concrete excluding the cost of centering and , shuttering , All work up to plinth level 1:4:8 (1cement: 4 coarse sand : 8 graded stone aggregate (40mm nominal size) |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering – All work upto plinth level 1:3:6( 1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size). |
| 8 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size) |
| 9 | Reinforced cement concrete work in beams, suspended floors, roofs havingslope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain windowsills, staircases and spiral stair cases above plinth level up to floor five level,excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size). |
| 10 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form work for: |
| 12 | Foundations, footings, bases of columns etc. for mass concrete. |
| 13 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 14 | Columns, pillars, piers, abutments, posts and struts |
| 15 | Suspended floors, roofs, landings, balconies and access platforms. |
| 16 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete |
| 17 | Excavating, supplying and filling of local earth (including royalty) by mechanicaltransport upto a lead of 5km also including ramming and watering of the earth inlayers not exceeding 20 cm in trenches, plinth, sides of foundation etc.complete. |
| 18 | Structural steel work riveted, bolted or welded in built up sections, trusses andframed work, including cutting hoisting ,fixing in position all Priming , Painting & carriage complete. |
| 19 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as perIS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, omplete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 20 | Providing and fixing Anchor bolts incld. Nuts , washer Etc Complete. |
| 21 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating Not less than 275 gram/m2 |
| 22 | Providing ridges or hips of width 90cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating Not less than 275 gram/m2 |
| 23 | Carriage of Sand /Agg For an Avg lead of 15Km By MT |
| 24 | Providing and laying autoclaved aerated cement blocks masonry with 150 mm/230mm/300mm thick AAC blocks in superstructure above plinth level upto floor V level in cement mortar 1:4 (1 Cement : 4 coarse sand ) and curing complete. The rate includes providing and placing in position 2 nos. 6 mm dia M.S bars at every third course of masonry work.Extra for brick work/tile brick/AAC block masonry in superstructure above floor V level for each four floors or part thereof by mechanical means:Incld. all Carriage from source to site complete. |
| 25 | Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position with cement motor 1:3(cement: 3 course sand) cost of required centering shuttering and finishing smooth with 6mm thick cement plaster 1:3(1cement:3 fine sand) on exposed surface complete 1:3:6(1cement:3 coarse sand :6 graded stone agg, 20mm nominal size |
| 26 | CEMENT PLASTER (IN COARSE SAND) 12mm Cement plaster of mix 1 : 4 ( 1 cement : 4 coarse sand) (PPC or cement with >25% flyash is recommended. |
| 27 | Rough cast plaster upto 10m height above ground level with a mixture of sand and gravel or crushed stone from 6mm to 10mm nominal size dashed over and including the fresh plaster in two layers , under layer 12 mm cement plaster in 1:4 ( 1 cement: 4 coarse sand ) and top layer 10 mm cement plaster with cement mortar 1:3 ( 1 cement: 3 fine sand ) mixed with 10% finely grounded hydrated lime by volume of cement. |
| 28 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dashfasteners of required dia & length (hold fast lugs or dash fastener shall be paidfor separately).2nd Class Kail Wood |
| 29 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessaryscrews, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall bepaid separately)Second class kail wood9.5.5.1 35 mm thick shutters |
| 30 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening forpanel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :9.7.2.2 Second class Kail wood |
| 31 | Providing and fixing factory made uPVC AIS or FENISTA or KOEMMERLING make white/wood Finish colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sashshall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacentfinished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately)Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. (Double Glazed Unit or SHGC with <0.25 and >0.35 VLT may be introduced.) |
| 32 | Casement cum fixed panel window having both end single casement panel, middle fixed panels and at top completely fixed ventilator with S.S friction hinges (350 x 19 x 1.9) made of (big series) frame 67 x 60 mm , sash 67 x 80 mm &mullion 67 x 80 mm all having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 3.00 sqm upto 5.00 sqm). |
| 33 | Providing and fixing factory made uPVC of AIS or FENISTA or KOEMMERLING make white/Wood Finish colour fixed glazed windows/ventilators comprising ofuPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately).Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable. Variation inprofile dimension in higher side shall be accepted but no extra payment on this account shall be made. (Double Glazed Unit or SHGC with <0.25 and >0.35 VLT may be introduced. |
| 34 | Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.) |
| 35 | Providing and fixing casement handle made of zinc alloyed (white powder coated) for UPVC casement window with necessary screws etc. complete. |
| 36 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 37 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 38 | Finishing walls with textured exterior paint of required shade :New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and includingpriming coat of exterior primer applied @ 2.20kg/10 sqm |
| 39 | Applying priming coat:13.50.1With ready mixed pink or Grey primer of approved brand and manufacture onwood work (hard and soft wood) |
| 40 | Preparing newly primed wooden surface for painting by way of filling of puty sand papering rubbing complete. |
| 41 | Painting with synthetic enamel paint of approved brand and manufacture ofrequired colour to give an even shade :13.62.1Two or more coats on new work over an under coat of suitable shade withordinary paint of approved brand and manufacture |
| 42 | Providing & Fixing finished brass hanging type floor door stopper with necessary screws etc complete. |
| 43 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and onforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier,wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Glazed Vitrified tiles Matt/Antiskid finish of size11.41A.3.1 Size of Tile 600 x 600 mm |
| 44 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S.15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing withgrey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.11.46.2 Size of Tile 600x600 mm |
| 45 | Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) \"manually controled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. (Note : It should have flush rate of with Flush rate of 4/2 Litre per Flush or less ) (Dual flush 4/2L WC cistern with bottom inlet for compact back to wall Rimless toilet) |
| 46 | Orissa pattern white vitreous china W.C. pan of size 580x440 mm with integral type foot rests. JAGUAR/CERA Make |
| 47 | Providing and fixing white vitreous china pedestal type water closet (European type W.C . .pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever requied: |
| 48 | Providing and fixing wash basin with C.I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: |
| 49 | P/F of mirrors of superior glass with plastic moulded frame(of approved quality) and of required size and shape. With 6mm thick hard board backing. Rectangular Shape 1500 x 450 mm |
| 50 | P/F Stainless steel 304 Grade Square Shaped Sink Vessel Sink (21 X 18 X 8) inches (Steel) of approved brand and manufacture Hindware/Jaguare/Imperio/ Kaff and any other approved brand as per Engineer Incharge |
| 51 | Providing and fixing soil waste & vent pipe (Prince or any other appoved brand as per Engineer In Charge |
| 52 | PVC Pipe. 110mm dia (10 feet unit Length) |
| 53 | PVC Pipe. 75mm dia (10 feet unit Length) |
| 54 | PVC Bend 110mm dia |
| 55 | PVC Bend 75mm dia |
| 56 | PVC Tee 110mm dia |
| 57 | PVC Tee 75mm dia |
| 58 | PVC Collar 110mm dia |
| 59 | PVC Collar 75mm dia |
| 60 | PVC trap 110mm dia |
| 61 | PVC trap 75mm dia |
| 62 | PVC Socket 110mm dia |
| 63 | PVC Socket 75mm dia |
| 64 | PVC door junction 110mm dia |
| 65 | PVC door junction 75mm dia |
| 66 | Providing and fixing 3 layer Thermex Pipe PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. |
| 67 | PN-16 pipe , 25mm OD(SDR-7.4) |
| 68 | PN-16 pipe , 32mm OD(SDR-7.4) |
| 69 | Supplying and fixing High Quality 32mm Thick Nitrile Insulation Tube for water pipeline of approved brand 2 Inch Size (Armaflex Class-o Armacell) including alumunium duct clading (Alumunium Sheet Guage Thickness = 0.46MM TO 0.71MM )of approved quality and finish as per the direction of engineer in charge |
| 70 | Supplying and fixing High Quality 25mm Thick Nitrile Insulation Tube for water pipeline of approved brand 2 Inch Size (Armaflex Class-o Armacell) including alumunium duct clading (Alumunium Sheet Guage Thickness = 0.46MM TO 0.71MM )of approved quality and finish as per the direction of engineer in charge |
| 71 | P/F CP brass toilet paper holder including cost of wodden,PVC,play etc. |
| 72 | Providing and fixing Wall mount Liquid Soap Dispenser of approved brand |
| 73 | Providing and fixing accessories of standard and quality make of approved manufacturer including all necessary fixtures required. |
| 74 | AL-Drops for room door |
| 75 | T- Bolt for doors |
| 76 | T- Bolt for Windows |
| 77 | Handles for door |
| 78 | Handels for window |
| 79 | 15 mm C.P. brass tap with elbow operation lever of approved brand and manufacture |
| 80 | 15 mm C.P. brass 2 in 1 tap of approved quality conforming to IS standards |
| 81 | 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 82 | 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms |
| 83 | C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge. |
| 84 | Providing and fixing Stainless steel SS-304 Grade L Shaped 90° Wall Mounted Grab bars Near EWC (European Water Closet) of approved brand for Disable-friendly Bathroom/Toilets as per standard and specification. |
| 85 | Providing and fixing Stainless steel SS-304 Grade Foldable Grab bar For Disable-friendly Bathroom/toilets Make: Jaquar/ Equivalent per standard and specification. |
| 86 | 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg. |
| 87 | High water pressure S.S geyser connection pipe (2 feet long) of approved quality and make, |
| 88 | 15 mm C.P. brass ABS Health Faucet Jet Spray with Hose and Holder of approved quality conforming to IS standards (KOHLER/JAGUAR/CERA) |
| 89 | Supply installation testing and commissioning of Instant Geyser 15ltr Capacity of approved brand (Havells/Bajaj/Crompton or any othet approved brand as per engineer in charge including all fixtures , bolts all complete |
| 90 | Providing and Fixing Handles with lock system of main doors LAPO Premium Rose Mortise Door Lock Handle Set/ Mortise Lock with Brass Lock Body and 70mm Brass Cylinder Set with 3 Brass Computer Keys / Zinc Alloy Weather Proof (Matt Finish) or Godrej Locking Solutions and Systems Gloria Antique Brass Door Handle with Lock Set 2C for Home and Office Entrance Door (200 mm, Gold) or any other approved brand as per engineer incharge |
| 91 | Providing and installation of PUF (Puf Insulated Tanks) water tank capacity 1000 ltrs of approved brand (SYNTEX OR ANY OTHER APPROVED BRAND) as per direction engineer incharge |
| 92 | TOUGHENED DGU glass panes of 5.0 mm thickness SAINT GOBAIN / ASAHI INDIA GLASS / HNGIL make as approved by engineer in chargeQty vide window openings |
| 93 | Polishing in high gloss/matt finish melamine clear polish on wood work inrequired color/wooden shade texture with following process in the sequenceas detailed belowThe surface to be polished is rubbed with sand paper 80/120 no. and thenwithsand paper of 160/180 nos.2. Applying two coats of sealer with spray gun and allowing sufficient dryingtime for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs.3.On drying of sealer coat, wet rubbing with emery cloth of finer grading withample water to remove excess sealer layerand make the surface further smoothafter this wet rubbing, then surface is applied with special grade melamine fillersto fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4to 6 hrs on which again a light wet rubbing is done this surface is further allowedto dry for 12 hrs.4. On this, 1st coat of melamine polish is applied with spray gun using melamineclear polish and melamine thinner in required proportion. This 1st coat is allowedto dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which isfurther allowed to dry for 12 hrs. The final melamine polish is applied withcompressor pressure spray gun using melamine clear polish and melaminethinner mixed in required proportion complete as per direction of Engineer-in- |
| 94 | Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : Agaria White |
| 95 | Design Supply and installation/Fixing staircase railling of stainless steel (Grade 304) railing(Top Handrail Dia > 50mm , two number intermediate Horizontal tubes Dia >25mm and Rectangular Two Pair Balusters Dia >38mm @1000mm C/C) made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) including fixing the railing with necessary accessories , newal post , balusters and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, necessary screws/fixtures complete job as approved by engineer incharge (Note : No additional payment shall be made to master pillar/Newal Post ) |
| 96 | Providing and Fixing modular almirah upto 1\"6\" to 2\" deep and Counter including fixing of all fitting like hings, handles, L-drop, Magnitic,Fevecol etc all complete with requred 19mm ,12mm thick playwood, beading ,sumica etc as per direction of site ingineer. |
| 97 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 Cement : 2coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 98 | Providing and laying 60mm thick factory made cementconcrete interlocking paver block of M-30 grade made byblock making machine with strong vibratory compactionand of approved size and design/shape laid in requiredcolour and pattern over and including 50mm thickcompacted bed of coarse sand, filling the joints withcoarse sand etc. all complete as per direction ofEngineer-in-charge. |
| 99 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering – All work upto plinth level 1:3:6( 1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size). |
| 100 | Centering and shuttering including strutting, propping etc. and removal of form work for: |
| 101 | Foundations, footings, bases of columns etc. for mass concrete. |
| 102 | Carriage of Sand /Agg For an Avg lead of 15Km By MT |
| 103 | Land Development |
| 104 | Earth work in excavation by mechanical means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like Not exceeding 10 Sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: within alead of 50 metres: |
| 105 | All kinds of soil |
| 106 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering – All work upto plinth level 1:3:6( 1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size). |
| 107 | Centering and shuttering including strutting, propping etc. and removal of form work for: |
| 108 | Foundations, footings, bases of columns etc. for mass concrete. |
| 109 | Supplying an Laying of good earth including royalty and carriage upto 5Km all complete |
| 110 | Carriage of Sand /Agg For an Avg lead of 15Km By MT |
| 111 | Compound walling |
| 112 | Earth work in excavation by mechanical means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like Not exceeding 10 Sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: within alead of 50 metres: |
| 113 | All kinds of soil |
| 114 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering – All work upto plinth level 1:3:6( 1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size). |
| 115 | Centering and shuttering including strutting, propping etc. and removal of form work for: |
| 116 | Foundations, footings, bases of columns etc. for mass concrete. |
| 117 | Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position with cement motor 1:3(cement: 3 course sand) cost of required centering shuttering and finishing smooth with 6mm thick cement plaster 1:3(1cement:3 fine sand) on exposed surface complete 1:3:6(1cement:3 coarse sand :6 graded stone agg, 20mm nominal size |
| 118 | Providing and fixing Ornamental Steel railing / Gate as per Direction of site Engineer in charage incld. Cutting welding Priming and Painting comlete. |
| 119 | 12mm thick cement Plaster 1:4 mix (1cement :4 fine sand) incld carriage complete |
| 120 | Finishing walls with textured exterior paint of required shade :New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm |
| 121 | Carriage of Sand /Agg For an Avg lead of 15Km By MT |
| 122 | Septic Tank |
| 123 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth anddisposal of surplus excavated earth as directed, within a lead of 50 metres: |
| 124 | All Kinds of Soil @60% |
| 125 | Soft Rock @40% |
| 126 | Disposal of excavated earth by mechnical Transport for an avg lead of 6Km by Mt incld. Loading ,Unloading complete. |
| 127 | Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position with cement motor 1:3(cement: 3 course sand) cost of required centering shuttering and finishing smooth with 6mm thick cement plaster 1:3(1cement:3 fine sand) on exposed surface complete 1:3:6(1cement:3 coarse sand :6 graded stone agg, 20mm nominal size |
| 128 | Dry random rubble masonry with hard stone in foundation and plinth: |
| 129 | Centering and shuttering including strutting, propping etc. and removal of form work for |
| 130 | Suspended floors, roofs, landings, balconies and access platforms. |
| 131 | Reinforced cement concrete work in beams, suspended floors, roofs havingslope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain windowsills, staircases and spiral stair cases above plinth level up to floor five level,excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size). |
| 132 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level:Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 133 | Provision for supply and laying of manhole cover heavy duty |
| 134 | Carriage of Sand /Agg For an Avg lead of 15Km By MT Please Enable Macros to View BoQ information |
