|
| 1 | M&L for 9-10mm thick Light shade vitrified ceramic tiles in floors, not exceeding 0.36 sqmset & jointed in neat cement slurry and pointed in coloured cement to match including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6for laying of floor tiles as directed. |
| 2 | Demolition of cement concrete(unreinforced) in ground floor and paving n.exc 15 cm below or above ground level. |
| 3 | M&L for 50 mm thick PCC (1:3:6), type C-2 using 40mm graded stone aggregate as in plinth protection, surface finished even & smooth without using extra cement. complete all as specified and directed. |
| 4 | M & L 20 - 25 mm thick machine cut pre mirror polished Kota stone slab in flooring or treads single piece of steps over and including 20mm thick screed bed in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing complete all as specified and as directed.Note:- The size of Kota stone slab shall cut in one peice as per site requirement. |
| 5 | Description same as per item No 11 above but as in skirting or vertical surfaces including 10 mm thick rendering in cement mortar 1:4, complete all as specified and as directed. |
| 6 | Demolition of brick work built in cement mortar including all quions, arches, pillars, etc complete. |
| 7 | M&L Brick work with fly ash bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) all as specified |
| 8 | Taking down cement plaster on wall/ceiling/roof etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed. |
| 9 | M&L15 mm thick rendering on fair faces of bk/concrete surfaces in CM (1:6) finished even and smooth (without using extra cement ) complete all as specified. |
| 10 | M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces,second layer (finishing coat)mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer\"s instructions and finished the surfaces even and fair without using extra cement complete. Note:Liquid WPC will be measured and paid separately. |
| 11 | Supply only liquid water proofing compound , ISI marked. |
| 12 | M & L for preparation ofsurfaces ofwall & concrete and applying 1 mm thick wall care putty including preparation complete. |
| 13 | M&L for preparation of new plastered or unplasteredsurfaces of wall andapplying two coats of oil bound distemper on wall or concrete over a coat of primer on prepared surfaces including, rubbing with sand paper complete. |
| 14 | M&L preparation of new plastered or unplastered surfaces of wall and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over |
| 15 | M&L for preparation of old plastered or decorated surfaces of wall andapplying two coats of oil bound distemper on wall or concrete over a coat of primer on prepared surfaces including, rubbing with sand paper including complete removal of the existing treatment |
| 16 | M&L preparation of old plastered or decorated surfaces of wall and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over |
| 17 | Taking down Chowkhats or frames not exc. 1.5 sq. m eachwith shutters (without taking off shutters from the frames) |
| 18 | Taking down Chowkhats or frames exc 1.5 sqm not e xc. 4 sq. m eachwith shutters (without taking off shutters from the frames) |
| 19 | S&F 2nd class hard wood plain, solid, straight, chowkat and frames, wrought, framed rebated on the solid, rounded or chamfered,put together with glue pinned at joints. |
| 20 | S & F 30 mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides, supplied and fitted to chowkats, completeall as specified and directed. |
| 21 | M&L Aluminium powder coated (powder coated of requried colour)doors frame top & sides of size 100 x 84.45x 3.00 mm , bottom size 100 x 84.45x 3.00 mmand shutter top & bottom of size 100 x44.45x3.00 (section No 21545) and sides (handle) of size 100 x 44.45x 3.00 mm (section No 20653 and lock side shutter frame of size 100 x 44.45x 3.00 mm (section No 20653) including rubber gasket, beading and locking arrangement including making good to the disturbed portion complete and including and fixing 5mm thick glass with necessary rubber beading gasket etc including necessary plaster, painting ,cill and making good to disturbed portion all as specified and as directed by Engr-in-charge |
| 22 | M&L Aluminium powder coated (powder coated of requried colour) three track sliding windows frame top & sides of size 92x45x2.00 mm (section No 21518), bottom size 92x45x2.0mm (section No 21514) and shutter top & bottom of size 52x18x2.0mm (section No 21649) and sides (handle) of size 52x18x2.00mm (section No 21649) and lock side shutter frame of size 52x18x2.00mm \" with including and fixing rubber gasket, beading and locking arrangement including making good to the disturbed portion complete including & fixing stainless steel wire mesh 0.36mm nominal dia of wire with 1.40mm average aperture and fixed with stainless steel wire staples and including and fixing 5mm thick glass with necessary rubber beading gasket etc including necessary plaster, painting ,cill and making good to disturbed portion all as specified and as directed by Engr-in-charge |
| 23 | S&F aluminium powder coted ventilator louvers type frame top and bottom of size 31x42x1.60mm(sec no-20558) rectaular tube of size 40x20x2 mm (sec no-14019 and middle verticalof size 42x46.20x1.60mm sec(20560) and clip for fixing wiremesh and glass of size 19x17.30x0.90mm (sec no-19360)thick including and fixingstainless steel wire cloth 0.36mm niminal dia of wire and 1.40mm average width of aperature and fixed with stainless steel wire staples and supply and fixing 5mm thick louvers with blades of 100 mm heavy duty with neccessary rubber beading ,gasket etc including necessary plaster, painting ,cill and making good to disturbed portionall as specified and directed by Engr-in-Charge |
| 24 | S&F aluminiumanodised grill of 7.00 mm diasquares rectangular triangular circular shape aperture n.exc 7.00cm in length or width fixed with H or F channel make grill No. 20 of décor or equivalent |
| 25 | S&F in repair Harrison rails, anodised aluminium alloy , chromium plated with fixing brackets, stops, rollers et |
| 26 | S&F for sliding door bolt of Aluminium alloy anodised 250 mm complete |
| 27 | S&F 100 mm size Butt hinges, extruded SS with steelhinge pin, anodised and fixed, type B-21 all as spd. |
| 28 | S&F 200 mm long aluminum anodised barrel tower bolts of extruded section as specified. |
| 29 | S&F 150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed all as spd. |
| 30 | S&F 150 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified. |
| 31 | M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of primer complete. |
| 32 | M&L Preparing old wooden surfaces exceeding 10Cm in width or girth and applying one coats of synthetic enamel paint complete. |
| 33 | M&L Preparing old steel surfaces exceeding 10Cm in width or girth and applying one coats of synthetic enamel paint complete. |
| 34 | M&L Water proofing treatment on \"Non approachable / non accessible and approachable roof\" surface (Horizontal, sloped& Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer including taking down of existing roof treatment,properly cleaning & drying the concrete surfaces complete(i) Applying a coat of oxidised bitumen based solvent primer @ 0.3 Kg / Sqm(ii)Applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 kg/ Sqm incl cleaning surfaces.(iii) Laying /unrolled over the bitumen coated surface, APPbasedpolymericmembraneminimumweighing3kg/sqmandminimum3mmthickreinforced with polyster non wove fabric (wt. notless than 150 gms/sqm)land on primed surfaceby forced application complete all as specified with 100 mm over laps shall be sealed by flame as per manufacturers instruction.(iv) Applying two coats of bituminous aluminium paintincluding preparation complete |
| 35 | M&L10 mm thick rendering on roof surfaces/concrete surface in CM 1:4 complete. |
| 36 | M&L for Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand ) to match the existing floors complete all as specified and directed. |
| 37 | M&L for Treatment of soil along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron, complete all as specified and directed. |
| 38 | Dismantling of ceiling board with fittings and any description including cover fillets as directed. |
| 39 | M&L for suspended false ceilling comprising of 4 mm thick non asbestos fibre cement bulding boards fixed or laid/inserted to GI frame work with screws over GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to sourrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fastners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm center to centre including hangers 6mmm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long complete all as specified. |
| 40 | Taking down copper /aluminium point wiring (light, fan, bell,socketor power) complete including fixture and fittings such as switches, ceiling roses, pendent, regulators, sockets, light fitting etc.Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces ofwalls, floors etc complete all as specified and directed at site. |
| 41 | Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed. |
| 42 | Labour only for taking down old serviceable existing ceiling fan from its original locations alongwith down rod, fan blades (Set of 03 Nos) carefully and keeping at site under safe custody for its further disposal |
| 43 | Labour only for taking down the existing ceiling Fan, refixing the same including replacement of unsv3 corePVC insulatedPVC sheated 3 core multistranded copper conductor cable flexibleof size 23/ 0.193 from ceiling rose to fan terminal and replacement of ceiling fan down rod of existing size/type withnot less than 1.8 mtr.long including carry out sevicing/ overhauling the same, painting complete with two coats synthetic enamel paintby spray gun (as per existing colour or as directed) duly cleaning the existing painted surface including filling cavities with filler after cleaning all dust etc.and partcles, supply & fixing of new down rod (existing dia / size) with suitable MS conduit /GI Pipe (as per existing grade ) complete all as specified and as directed. |
| 44 | M & LOne light point controlled by one, one way switch 5 Ampsfor Point wiring using approved colour coding as per IS, with multistranded copper conductor1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts gradeISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches,including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly includingcutting, chasses and makinggooddisturbed surface to match with existing finish with plaster complete all as specified and directed. |
| 45 | All as per item No 44 but forOne fan point/ exhaust fan point controlled by one, one way switch 5A & regulator |
| 46 | All as per item No 44 but One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 47 | All as per item No 44 but One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad. |
| 48 | All as per item No 44 but One bell point controlled by one, bell switch 5 Amps |
| 49 | Description all as per item No 5 here in before butusing 2.5 sq mm single core copper conductor FRLSH cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of2.5 sq mm copper conductor FRLSH cable of multistranded PVC insulated unsheathedas earth continuity conductor along with wiring and connecting to the common eath dolly complete. |
| 50 | S & Ffor ceiling rose, surface Bakelite with 3 terminals, ISImarked for batten fitting complete. |
| 51 | S & Ffor modular switch piano flushtype, single pole, one way, and 5/6 Amp single module complete all as specified. |
| 52 | S & Ffor modular switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as specified. |
| 53 | S & F for modular socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified. |
| 54 | S & Ffor modular socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified. |
| 55 | S & Ffor modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed. |
| 56 | S & Ffor Bell push modular 6 Amps single module complete all as specified. |
| 57 | S & Ffor lamp holder, PVC / Polycarbonate type with back plate suitabl for batten/ slanting fittings complete all as specified and directed. |
| 58 | S & Ffor Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed |
| 59 | S & F for sheet metal enclosure MCBDBTPN4 way Vertical type with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 60 | S & FforMCB tripple pole and neutral rated capacity 63 Amps, 415 Volts breaking capacity 10 KA, \"C\" curve complete all as specified and as directed. |
| 61 | S & F for MCB Single pole and neutral rated capacity 32 Amps, 240 Volts breaking capacity 10 KA, \"C\" curve complete all as specified and as directed. |
| 62 | S & Ffor MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, \"C\" curve complete all as specified and as directed. |
| 63 | S & F for Highly efficient LED Bulbs, 10 W, used as a ready replacement for existing GLS/CFL direct fit lamp,in B-22 cap ofcomplete all as specified and directed |
| 64 | S & F for wall mounted LED tube light fitting 4 feet x 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouputboxtype fitting, 230 volts and intregrated electronic driverconnector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired andnecessary mounting arrangements, provision of new 3 core multistrandedcopper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. |
| 65 | S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25/35 watts with pre wired andnecessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. |
| 66 | M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia/ No.8 SWG by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type ofsoil/strata and testing on completion. Note:- GI earth wire 4 mm dia / No.8 SWG and 15 mm dia protection pipe medium grade upto 7.5 mtr from earth plate is deemed to be included in rate quoted. |
| 67 | S&F energy efficient recessed mounted LED luminaire 36 Watt suitable for 2\"x2\" grid ceiling with flat diffuser and lumen output of 3300 lumens having constant current electronic driver duly connected with 0.5 sqmm white colour PVC insulated & sheathed three core flexible multi stranded copper conductor cable in renewal of any type luminaire as required. |
