|
| 1 | Notes:-(i) 100 percent nonperishable items of the work shall be deposited by the L1 bidder within 30 days after placing of work order.(ii) The critical path network shall be submitted by L1 bidder immediately after the acceptance of tender and approved by GE.(iii) The bidders must ensure to visit the site, check relevant documents and makes of materials required to be incorporated under the subject from concern Engineer-in-Charge.(iv) The unserviceable material obtained under the schedule of credit shall be handed over to the contractor by the Engineer-in-Charge on a proper gate pass.(v) In case of non-availability of any make mentioned under list of Makes, the L1 Bidder shall obtain non-availability / non-manufacturing certificate from the concern OEM / authorised dealers and submitted to Accepting Officer, the L1 bidder may be incorporated makes as approved by HQ CE SWC Jaipur and HQ CE BTZ in the works after prior approval of Accepting Officer.(vi) L1 Bidder shall produce E-way bill alongwith test certificate from OEM / manufacturer for costly items / major items of amount above Rs 50,000/- along with RAR’s and Final Bill.(vii) L1 Bidder shall be maintained an album containing Photos of all the material brought at site and each stage wise work progress and kept at site. Same shall be deposited in Engineer-in-Charge office after completion of work.(viii) The cost of all the above provisions shall be deemed to be included in the quoted rate of bidder, nothing extra shall be paid to the bidder.(ix) If a bidder observes any item in the BOQ that appears to be \"Freakishly Low\" or technically not required for execution at the site, the bidder must submit written comments to the Accepting Officer during the pre-tender stage or at least 07 days before the Bid Submission Start Date.(x) Any act by the contractor that is found to be against the interest of the Department, or any complaint received through proper channels and supported by verifiable proof (e.g., fraudulent vouchers, negligence in execution, or attempt to cause undue benefit), shall be treated as a willful default.Such defaults shall render the contractor liable for an Adverse Remark (\"NO\") in the Quarterly Work Load Return (WLR), barring the firm and its related/sister concerns from participating in further tenders |
| 2 | Dismantling asbestos cement corrugated or semi corrugated sheets as in roof covering complete all as specified and as directed. |
| 3 | M&L Pre-painted galvalume aluminium zinc coating AZ-150 GI based corrugated steel sheet 0.6 mm thickCompany Rolled of any colour having tensile strength of 550 Mpaas in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and as directed.MAKE :- TATA DURASHINE/JSW Colouron+/JINDAL Neu Color + or Technocommercial make metioned in Appx \"A\") Note:- Contractor Shall Submit Manufacturer Warranty certificate from manufacturer . |
| 4 | M&L Pre-painted galvalume aluminium zinc coating AZ-150 GI based Plain steel sheet 0.6 mm thickCompany Rolled of any colour having tensile strength of 550 Mpaas in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and as directed.MAKE :- TATA DURASHINE/JSW Colouron+/JINDAL Neu Color + or Technocommercial make metioned in Appx \"A\")Note:- Contractor Shall Submit Manufacturer Warranty certificate from manufacturer . |
| 5 | Dismantling structural steel work as in doors, gate etc etc complete all as specified and directed by the Engineer-in-Charge. |
| 6 | Dismentling unframed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed |
| 7 | Demolition of Brickwork or stone/boulder masonry, built in CM or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articlescomplete all as specified and as directed. |
| 8 | M&L brickwork withfly ash bricks, straight or curved in plan exc 6 mtr mean radius built in CM (1:6) using old size bricks complete all as specified and directed by Engr-in-Charge. |
| 9 | All as per aboveitem No. 7 except bricks |
| 10 | Taking down cement or cement lime plaster wall and ceiling including in patches, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-Charge. |
| 11 | M&L forrendering 15 mm thick on fair faces of brick or concrete surfacesin cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 12 | M & L for preparation of newly plastered surfaces of wall & applying two coats of emulsion distemper white or coloured by Roller or Air Spray over 1.5 mm thick wall care putty(Multipurpose mixer shall be used for uniform and proper mixing of putty)complete all as specified and as directed by Engineer-in- charge. (MAKE :-Tractor Emulsion (Asian Paints), Easy Clean (Berger Paint), Promise Inerior (Dulux Akzonobel) or Techno commercial as mentioned in Appx \"A\". |
| 13 | M&L forrendering 15mm thick on fair faces of brick or concrete surfacesin cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 14 | M & L for preparation of newly plastred surfaces of wall,by Vaccume based sanding machine,and applying two coats of exterior emulsion acyrlic weatherproof antifungal paint over a coat of exterior grade primer byAuto Roller over 1 mm thick wall putty, including necessary scffoldings complte all as specified and as directed. MAKE :-(Brand :- Apex Ultima (Asian Paint), Weather Coat ( Berger Paint ), Excel No Dust ( Nerolac) or equivalent brand of Make specified in Appendix \"A\". |
| 15 | M & L providing cement concrete type B1 1:2:4(20 mm graded aggregate)as in lintels upto 1.5m clear span, copings, bed plates (block),cills, steps and other bands, parapet and railing upto 60cm height complete all as specified and directed . |
| 16 | M&L as in repair Anodised aluminium silhouette snap grid with size of grid 605x605mm frame work for false ceiling incl. Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long and Providing and fixing PVC Gypsum Board 8 mm thick in ceiling fixed with screw as per manufacturers instructions including demolition of boarding, ceilling board with fram work complete all as specified. Make of Board : Everest /Armstrong/Gyproc (Saint Gobain) or Techno Commercial make as mentioned in Appx \"A\". |
| 17 | Taking down and erection Fixing only Rooftrusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.Note:- Refix the same rafter after raising ht. of bldg complete all as specified and as directed |
| 18 | M & L Granite (of any type) tiles 20mm thick in steps, jambs,pillers, window cill, cooking platform, etc machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing and 15mm thick cement sand screed bed complete all as specified and as directed. |
| 19 | S&F rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails , fixed with angle cleats or other connecting plates, gusset plates, etc conforming to Fe-410(Gde E- 250) and applying two coat of sythetic enamel paint over a coat of primer complete all as specified & directed by Engineer-in-charge. |
| 20 | Taking down chowkat or frame with shutters including fitting and fixtures area exc 1.5 Sqm but not exc 4 Sqm each (without taking off the wooden shutters from the frame) including cutting holes for hold fasts and making good disturbed surface with cement mortor or PCC after fixing new chowkats complete all as specified and directed by Engineer-in-charge. |
| 21 | Taking down shutters of any description exc 1 Sqm and not exc. 2 Sqm each (includig fitting and fixtures) complete all as specified and as directed by Engineer-in-charge. |
| 22 | S&Fpressed steel frames for door of size 125x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc made out of mild steel sheet of 1.25mm thickness, plain cement concrete (1:3:6) type C-1 using 12.5mm graded stone aggregate as in filling of pressed steel frame, chowkats, hold fast blocks and other similar items etc, applying one coat of synthetic enamel paintcomplete all as specified and directed by Engineer-in-Charge. |
| 23 | S&F anodised aluminium frames powder coated (thickness of powder coating shall not less than 50 micron) for doors, windows, ventilators with one or more rebates including jointing cleats for fixing etc and as per the speicification the top and bottom horizontal members and vertical members adjacent walls shall be fixed with floor, ceiling walls and cills where required and fixing with the help of rawal plug and screw or with fixing clip or with expansion hold plate fastners including making arrangement to fix guard bars and PVC sleeves for guard bars. Aluminium section shall be smooth, rust free, straight mitred and jointed mechanically where ever required all complete all as specified and directed by Engineer-in-Charge. Make : Fenesta/NALCO/AIS or technocommercial equivalentmake as specified in Appendix \"A\". |
| 24 | S&F anodised aluminium window / ventilators (glazed and gauzed) shutters powder coated (thickness of powder coating shall not less than 50 micron) side hung type, without sash bars having aluminium sections weighting 0.55 Kg/RM including necessary jointing cleats, glazing clips, anodised aluminium snap beading, screws, rubber neoprene packing including anodised aluminium fitting such as peg stay 150mm long (1 No), hinges type B21 100mm size (2 Nos), suitable handle (1No) including stainless steel wire cloth 0.56mm nominal dia of wire with powder coated alumium grill or4mm thick sheet glass ordinary quality not exc 0.5 Sqm including taking down exsting window /ventilator complete all as specified and as directed.Note : Rates for wire mesh, grill and glass deemed included in above rate.Make : Fenesta/NALCO/AIS or technocommercial equivalentmake as specified in Appendix \"A\". |
| 25 | S&F anodised aluminium doors shutters powder coated (thickness of powder coating shall not less than 50 micron) sliding / openable having aluminium sections weighting 0.55 Kg/RM including necessary jointing cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, 100mm size, 4 levers brass mortice lock vertical type (01 No), hinges, anodised aluminium snap beading, aluminium (die cast) body door closer hydraulically regulated , designation No 3 universal type,suitable for door shutter 851 to 1000mmin width, aluminium anodised snap beading screws including galvanised mild steel wire cloth 0.56mm nominal dia of wire and 4mm thick sheet glass ordinary quality complete all as specified and as directed.Note : Rates for wire mesh and glass deemed included in above rate.Make : Fenesta/NALCO/AIS or technocommercial equivalentmake as specified in Appendix \"A\". |
| 26 | S & F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, including two coat synthetic enamel paint over one coat pink primeras per specification as per SSR part I all as specified and directed by Engr-in-charge. Rate ofsupply and fixing of following items shall be included in the quoted rate :- (a) Stainless steel (304 Grade) finished butt Hinges 100 mm, 4 Nos per leaf. (b) Stainless steel (304 Grade) finished square tower bold 200 mm long-2 Nos per leaf as per table 01 dia of bolt 12 mm (c) Stainless steel (304 Grade) Finished Handles 200 mm-2 Nos per leaf. (d) Stainless steel (304 Grade) finished sliding bold 300 mm-1 No per leaf, 16 mm dia. (e) Stainless steel (304 Grade) Finished Floor door stopper 140 mm -1 Nos per leaf. |
| 27 | S&F 35mm thick glazed and skelton shutters open rebated and prepared to receive gauze etc (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred breds for securing glass etc sizes of members of shutters as specified in SSR Pt-I Sec 8 Clause 8.20(a) in 2nd class hard woodincluding two coat synthetic enamel paint over one coat red oxide zinc chrome prime. Rate ofsupply and fixing of following items shall be included in the quoted rate :- (a) Stainless steel (304 Grade) finished butt Hinges 100 mm, 3 Nos per leaf (b) Stainless steel (304 Grade) finished square tower bold 200 mm long-2 Nos per leaf as per table 01 dia of bolt 12 mm (c) Stainless steel (304 Grade) Finished Handles 200 mm-2 Nos per leaf. |
| 28 | M&L for reinforced cement concrete (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) as in beams , cantilevers, bressummers, lintels over 1.5m span including demilition of existing reinforced concrete complete all as specified and directed and directed by Engineer-in-Charge. |
| 29 | S&F mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed by Engineer-in-charge. |
| 30 | Taking down carefully or drawn out from conduit, existing copper / aluminium point wiring for light, fan, bell, socket, power point etc complete including fixture and fittings such as switches, sockets, ceiling rose, pendent holder, light fittings, top sheet covers, fan regulators, MCB, DB, lamp, earth plug etc (excluding MS sunken boxes) and making good the disturbed surfaces of wall/ceiling complete all as specified and as directed by Engineer-in-charge. |
| 31 | M&L for Modular point wiring complete with 2.5 Sqmm (nominal cross section area) FRLSH PVC insulated multistranded unsheathed copper conductor cable drawn in and including concealed PVC rigid conduit medium grade 20mm dia, pipe hooks, elbows, junction covers and junction boxes including cutting chases in walls for conduits and for sunken pressed steel terminal boxes and making good the disturbed surfaces of wall with all jointing accessories including provision of pressed steel sunken terminal boxes made of 1.2mm thick pressed steel sheet, 60mm deep of suitable length and painted with red oxide primer for mounting modular switches, sockets, fan regulator including suitable size modular plates fixed flush with wall including 2.5 Sqmm PVC insulated multistranded unsheathed copper conductor wire as earth continuity to common earth and connecting to earth dolly for one light point, fan point, bell point controlled by one switch complete all as specified and directed by Engineer-in-Charge.Note : The quoted rate shall be deemed to included with modular cover plates with frame of any colour and metal flush boxes of suitable size as directed by Engr-in-Charge. |
| 32 | S&F Modular switch piano 6 Amps single pole, one way, 01 Module complete all as specified and directed by Engineer-in-charge. |
| 33 | S&F ceiling rose surface bakelite 65mmx50mm with two or three terminal complete all as specified and directed by Engineer-in-charge. |
| 34 | S&F Energy efficient decorative ultra slim, prewired, lumiline 10 watt LED light fitting (Day cool light), batten type with drive & polycarbonate housing including tube rod and all accessories prewired fixed on wall / hanging complete all as specified and as directed by Engineer-in-charge.Make : Havells Cat Part No.:- LHEXAZP7PN1W010/Crompton Cat Part CCS-103-10-65-SL-DP-NWH/Wipro Cat Part D531065 or equivalent cat part of Make as specified in Appendix \"A\". |
| 35 | S&F Energy efficient decorative ultra slim, prewired, lumiline 20 watt LED light fitting (Day cool light), batten type with drive & polycarbonate housing including tube rod and all accessories prewired fixed on wall / hanging complete all as specified and as directed by Engineer-in-charge.Make : Havells Cat Part No.:- LHEXAZP7PN1W020/Crompton Cat Part CCS-103-20-65-SL-DP-NWH/Wipro Cat Part D532065 or equivalent cat part of Make as specified in Appendix \"A\". |
| 36 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
