Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 2 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed. |
| 3 | Removing excavated material (soil) n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed. |
| 4 | M&L for post construction anti termite treatment with approved chemical along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed. |
| 5 | M&L for post construction anti termite treatment with approved chemical of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed. |
| 6 | M&L cement concrete 1:5:10 type E-2 using graded brick coarse aggregates as in sunken portions etc complete all as specified anddirected |
| 7 | M&L for cement concrete1:4:8type D2,using 40mm graded crushed stone aggregate as in foundations filling and mass concrete complete all as specified and directed. |
| 8 | M&L for PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in copping and filling in back of chowkatthe like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 9 | M&L forProviding, cement concrete1:2:4type-B1 using 20mm graded crushed stone aggregate in lintels upto 1.5m clear span, cills, steps;roof padding, seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed. |
| 10 | M&L for Providing precast ce- ment concrete type B1, 1:2:4 using 20mm graded crushed stone aggregate in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces etc. and setting in cement mortar 1:4 complete with joints to match complete all as specified and directed. |
| 11 | M&L for R.C.C, Nominal mix of 1:1.5:3 using 20 mm graded crushed stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves etc all as specified and directed. |
| 12 | Supply only integral water proofing compound liquid grade conforming to IS-2645 complete all as specified and directed. |
| 13 | M&L for brickwork with old size fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed. |
| 14 | M&L for brickwork with old size fly ash bricks, straight or curved on plan to any radius as in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed. |
| 15 | M&L for Cutting chases, pinning in brick walls,making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring,etc.and making good, cutting not exc 10cm girth complete all as specified and directed. |
| 16 | M&L for 18mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 20mm thick screed bed in cement mortar 1:4complete all as specified and directed. |
| 17 | M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work;not exceeding 200mm thick (Horizontal or sloping) rough finished surface flat complete all as specified and directed. |
| 18 | M&L for Timber framed inSecond classhard-wood in scantlings clean sawn complete all as specified and directed. |
| 19 | M&L for Plain fillets. square, rectangular or triangular in section, clean sawn, securedwith nails orbrads exc13 & but not exc 25sqcm in 2nd class hard wood complete all as specified and directed. |
| 20 | S&F 25mm thick factory made flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 21 | S&F 35mm thick factory made flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 22 | Taking down chowkat or frame with shutter (without taking off shutter from the frame) area not exc. 1.5sqm each, including cutting holes for removing the hold fast,making good disturbed surfaces and removing materials from site of work complete all as specified and directed. |
| 23 | Taking down chowkat or frame with shutter (without taking off shutter from the frame) exc. 1.5 sqm and n.exc 4 sqm each, including cutting holes for removing the hold fast, making good disturbed surfaces and removing materials from site of work complete all as specified and directed. |
| 24 | Taking down old unserviceable shutters of any description exc 1.00 but n.exe 2.00 Sqm each and removing from or to store complete all as specified and directed. |
| 25 | S&F Factory Made Solid PVC Moulded Door Shutter with particle board core , 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 26 | S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing.(Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)complete all as specified and directed. |
| 27 | S&F 200mm aluminium anodised barrel tower bolts of extruded sectioncomplete all as specified and directed. |
| 28 | S&F 150mm aluminium anodised barrel tower bolts of extruded sectioncomplete all as specified and directed. |
| 29 | S&F 100mm aluminium anodised barrel tower bolts of extruded sectioncomplete all as specified and directed. |
| 30 | S&F 300 mm long aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) andfixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and direcetd. |
| 31 | S&FContinuous (piano) hinges Width of flaps (when open) in 30mm,mild steel, bright finish or electrogalvanised complete all as specified anddirected. |
| 32 | S&F 200mm size aluminium handle cast typecomplete all as specified and directed. |
| 33 | S&F 150mm size aluminium handle cast typecomplete all as specified and directed. |
| 34 | S&F 100mm size aluminium handle cast typecomplete all as specified and directed. |
| 35 | S & F hasp and staple 125 mm size,safety type, brass with mild steel hinge pin incl bolt to hinge plate and fixed with screws complete all as specified and direcetd. |
| 36 | S&F stainless steel decorative curtain rod of 20 mm bore with wood finishes, wall thickess 0.75 mm fixed with curtain rod holder fixed on wall with screws and finial caps with and incl 06 Nos Ring per RM complete all as specified and as directed. |
| 37 | S&F in repairtubular towel rail 20mm dia type brass chrormium plated 600mm long between flanges complete all as specified and directed. |
| 38 | S&F Ball catches with 8mm dia steelball, and brass body and strikingplate including letting in andfixed complete all as specified anddirected. |
| 39 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplescomplete all as secified and as directed |
| 40 | M&L for MS framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165complete all as specified and directed. |
| 41 | M&L forTMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 42 | M&L forTMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 43 | M&L forrolled sections as in main and cross beams, hip and jack rafters, purlins where connected to comman rafters and running railsfixed with angle cleats or other connecting plates conforming to Fe 410 W (Gde E-250) quality-A including welded to rafter,purlin complete all as specified and directed. |
| 44 | S&F MSframed work confirming to Fe 410 -W quality Aas in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete. |
| 45 | M&L for 1.25mm thickpressed steel door frame of size 165mm x 60mm with one or more rebates including necessary , hinges, lock strike plate, fixing lugsetc complete as specified. |
| 46 | M&Lfor 1.25mm thickpressed steel door frame of size 105mm x 60mm with one or more rebates including necessaryfixing lugs , hinges, lock strike plate etc complete all as specified and directed. |
| 47 | M&L for anodised aluminium snap grid (SIZE-605x605MM) frame work for false ceiling Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. |
| 48 | S&F Hard drawn steel wire fabric in available size Weight per square metre Not exc4 kg complete all as specified and directed. |
| 49 | S&F Pre- painted coloured trapezoidal profiled Galvalume/ Zincalume sheet with min thickness 0.50mm TCT confirming to IS - 513(AZ-150 GSM, Al Zn allay metalic coating with 550 Mpa yield stress as per AS-1397) as in roof covering/cladding towall, fixed with self tapping screws colour exterior coat of silicon modified polyster/BHP x RW paint system 20 micron top coat applied over 5 micron primer and 5 micron polyster back coat applied over 5 micron primer , all fixed with galvanized self drilling self tapping fastner (12-14 x 55 with EPDM seals) complete all as specified and directed. |
| 50 | S&F Pre- painted coloured plain sheet Galvalume/ Zincalume sheet with min thickness 0.50mm TCT confirming to IS - 513(AZ-150 GSM, Al Zn allay metalic coating with 550 Mpa yield stress as per AS-1397) as in roof covering/cladding towall, fixed with self tapping screws colour exterior coat of silicon modified polyster/BHP/ XRW paint system 20 micron top coat applied over 5 micron primer and 5 micron polyster back coat applied over 5 micron primer , all fixed with galvanized self drilling self tapping fastner (12-14 x 55 with EPDM seals) complete all as specified and directed. |
| 51 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)complete all as specified and directed. |
| 52 | S&F 4 mm thick designed Non asbestos fiber cement pre-paintedbuilding boards, fixed or laid /inserted totimber /GI /Aluminium frame-work with screws complete all as specified anddirected. |
| 53 | M&L 18/19mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work complete all as specified and directed |
| 54 | M&L for 75mm thick PCC 1:3:6 type C2(Using 40mm graded crushed stone aggregate) as in sub base of floor/path complete all as specified and directed. |
| 55 | M&L for 25mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded crushed stone aggregates)as on roof top finished the surface to receive the water proofing treatment completeall as specified and directed. |
| 56 | Dismantling of floor, hearth or wall tiling / Paving Blocks including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed. |
| 57 | M&L for rendering 15 mm thick in cement mortar 1:4 on concrete surface mixed with water proofing compound as per manufacture instruction etc complete all as specified anddirected. Notes : WPC shall be measured and paid seperately under respective item of this schedule. |
| 58 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed. |
| 59 | M&L for sheet glass, 4mm thick, ordinary quality and glazing with oil putty in squares n exc. 0.50 Sqm each panecomplete all as specified and directed. |
| 60 | S&F 4.0mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sqm in each panecomplete all as specified and directed. |
| 61 | M&Lfor preparation of old paintedwood/wooden surface of any description over 10cm width or girth and applying one coats of synthetic enamel paint (1st grade quality) complete all as specified and directed. |
| 62 | M&Lfor preparation of untreated new wood/wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and directed. |
| 63 | M&L for one coats of synthetic enamel painton oldtreated steel surfaces of any description over 10cm in width or girthincluding preparation of surfaces complete all as specified and directed. |
| 64 | M&L for two coats of synthetic enamel paint over one coat of red oxideon new steel surfaces of any description over 10cm in width or girthincluding preparation of surfaces complete all as specified and directed. |
| 65 | S&F medium grade galvanized steel tubingwith all fittings & fixed complete to walls & ceiling or laid in floors 20 mm dia bore pipe (including in short length) complete all as specified anddirected. |
| 66 | S&F medium grade galvanized steel tubing with all fittings & fixed complete to walls & ceiling or laid in floors 25 mm dia bore pipe (including in short length) complete all as specified anddirected. |
| 67 | Taking up or down steel tubing and connections,including cleaning for refixing or removal to store bore of pipe 15 mm complete all as specified and as directed |
| 68 | Taking up or down steel tubing and connections,including cleaning for refixing or removal to store bore of pipe 20 mm complete all as specified and as directed |
| 69 | Taking up or down steel tubing and connections,including cleaning for refixing or removal to store bore of pipe 25 mm complete all as specified and as directed |
| 70 | Dismantling water tanks and removing to store exc 250 ltr but not exc 500 ltr capacity complete all as specified and as directed |
| 71 | S&F rotational moulded PVC water storage tank 500 ltrs capacity conforming to IS-12701(1989) cylindrical vertical type double-layered with closed top (thereated) including inlet,outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part I etc completge all as specified and directed. |
| 72 | S&F 15mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed. |
| 73 | S&F in repairfancy type, chromium platedstop valve/ angle valvecast copper allow screw down high pressure with crutch or butterfly handle screwed both end form iron pipe or for union and fixed of size 15mm dia complete all as specified and directed. |
| 74 | S&F in repairGun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20mm bore and fixed as in repair complete all as specified and directed. |
| 75 | S&F ball valves for 20mm bor dia of pipehigh pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0mm-210gms./25mm-455gms/ 40mm - 690 gms) complete all as specified and directed. |
| 76 | S&FPVC connectionspipe ,15mm dia size with PTMT nuts of length 450mm complete all as specified and directed. |
| 77 | S&F 75mm PVC (SWR) as in drain pipes single socketed in any length with rubber ring jointslaid in trenches or in floors complete all as specified and directed. |
| 78 | S&F 110mm PVC (SWR) as in drain pipes single socketed in any length with rubber ring jointslaid in trenches or in floors complete all as specified and directed. |
| 79 | S&F 110mm PVC (SWR)pipes single socketed in any length with rubber ring joints fixed to wallscomplete all as specified and directed. |
| 80 | S&F 75mm bore PVC (SWR) bends with rubber ring joints any radius complete all as specified and directed. |
| 81 | S&F 75mm bore PVC (SWR) bends with oval access door and rubber ring joints any radius complete all as specified and directed. |
| 82 | S&F110mm bore PVC (SWR) bends with rubber ring joints any radius complete all as specified and directed. |
| 83 | S&F 110mm bore PVC (SWR) bends with oval access door and rubber ring joints any radius complete all as specified and directed. |
| 84 | S&F 75mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed. |
| 85 | S&F 110mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed. |
| 86 | S&F 110mm bore PVC (SWR) vent cowl complete all as specified and directed |
| 87 | S&F in repair PVC (SWR) floor trap 75mm dia , plain with grating including jointing to waste pipe in cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate complete all as specified and directed. |
| 88 | M&L for plain cement concrete type C-2, 1:3:6 using 40mm graded crushed stone aggregate as in concrete bed including packing under & haunching against sides ofbore pipes 150mm dia pipe after the pipe are laid and testedcomplete all as specified and directed. |
| 89 | M&L for SGSW pipes 150 mm dia grade \"A\" laid in trenches and jointed complete all as specified and directed. |
| 90 | M&L forCutting salt-glazed stoneware drain pipe 150mm diain position, including jointing socket end of new pipe to same with packed spun yarn and cement mortar 1:1 complete all as specified and directed. |
| 91 | S&F in repair sinks made of stainless steel01mm thick kitchen or laboratory with plugs, washers and wastes;including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe,overall size 495mm x 420mm bowl size 410mm x 330mm x 160mmcomplete all as specified and as directed |
| 92 | S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 93 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings,dressed stonework and precast concrete articles complete all as specified and directed. |
| 94 | Dismantling of stone slabs and tiles of any description or thickness in floors, approachs, dado/Partitions laid bedded and pointed in any mortaretc complete all as specified and directed |
| 95 | Demolition of Concrete un- reinforced of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 96 | Dismantling timber scantlings 40 sqcm and over in section, in framed section any position like trusses, rafters, purlins etc. complete all as specified and directed. |
| 97 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 98 | Dimantling of Asbestos cement (corrugated,semi corrugated, etc.) sheets in roof coverings including ridges etc complete all as specified anddirected |
| 99 | Dismantlingwall and ceiling board( fiber, pulp, insulation, etc.) or insulation board/slab/ blankets, any thickness, including cover fillets complete all as specified and directed. |
| 100 | Dismantling of 100mm dia cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed. |
| 101 | M&L fornewly plastered surface of wall appying two coat of white or tinted oil bound distemper over one coat of alkali resistant priming paint including 02mm thick wall care putty etc complete all as specified and as directed. |
| 102 | M&L for powder coated(minimum thickness of powder coating 50 micron)anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as speecified and directed.Note : (i) Weight of Aluminium sections as per actual or as per IS or as per Manufacturer which over is less, shall only be considered for payment.(ii) Cost of all the items/ accessories required for the entire completion of the work shall be deemed to be included in the quoted rate. However glass panes and wire cloth shall be measured and paid separately under respective items. (iii) The accessories (Aluminium mongries etc) required to be provided for window, vents and doors as per directions of Engineer-in-charge shall be provided but weight for the same shall not be considered and no extra cost will be paid. |
| 103 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, partitions,windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved makeonforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snapbeading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.Note : (i) Weight of Aluminium sections as per actual or as per IS or as per Manufacturer which over is less, shall only be considered for payment.(ii) Cost of all the items/ accessories required for the entire completion of the work shall be deemed to be included in the quoted rate. However glass panes and particle board shall be measured and paid separately under respective items. (iii) The accessories requiredfor partition as per directions of Engineer-in-charge shall be provided but weight for the same shall not be considered and no extra cost will be paid. |
| 104 | M&L for 18-20 mm thick machine cut kota stone slab (table rubbed, moulded exposed edge) as in skirting/dadoover and including 15 mm thick rendering in cement mortar 1:4 fixed & jointed with grey cement slurry mixed with pigment to match the shade of slab includingthe edge half round and rubbing and polishing complete all as specified and directed. |
| 105 | M&L for 18-20 mm thickmachine cut kota stone slab (table rubbed, moulded exposed edge) flooring over and including 20mm thick cement screed bedding layer in cement mortar 1:6 laid & jointed with grey cement slurry mixed with pigment to match the shade of slab including grinding the edge half round and rubbing and polishing complete all as specified and directed. |
| 106 | M&L for 75mm thick PCC 1:3:6 type C2(Using 40mm graded crushed stone aggregate) as in plinth protectionfinishedeven and smoothusing extra cement.Joints to be given at every 3m interval and corners of buildings and fitted with bituminious mastic or equivalent filler complete all as specified and directed. |
| 107 | Roughening the surfaces of old concrete floor by picking, sweeping cleaning and washing down with water to remove dust, etc and brushing neat cement slurry with 3.0 kg of cement per sqm complete all as specified and directed, |
| 108 | M&L for Glazed ceramic tiles coloured 300mmx 450mm , 6 to 7 mm thick as in skirting / dado, set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surface etc complete all as specified andand as directed |
| 109 | M&Lfor Non Skidceramic tiles (coloured) 7 to 8 mm thick , (square / rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm as in floor etc, set and jointed in neat cement slurry and pointed with white or coloured cement to matchover and including screed bed or bedding layer 15mm thick in cement mortar 1:6for laying floor finishes etc complete all as specified and directed |
| 110 | M&Lfor Non Skidceramic tiles (coloured) 7 to 8 mm thick , (square / rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm as in dado/skirting etc, set and jointed in neat cement slurry and pointed with white or coloured cement to matchover and including rendering layer 10 mm thick in cement mortar 1:4etc complete all as specified and directed |
| 111 | M&Lfor Non Skidceramic tiles (coloured) 7 to 8 mm thick , (square / rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38sqm as in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to matchover and including screed bed or bedding layer 15 mm thick in cement mortar 1:6for laying floor finishes etc complete all as specified and directed |
| 112 | M&L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; completeall as specified and directed. |
| 113 | M&L for rendering 5mm thick on ceiling in cement mortar 1:3 on fair faces of concrete surface finishing surfaces even and smooth without using extra cement complete all as specified and directed. |
| 114 | M&L providing 15mm thick cement plaster in cement mortar 1:6 mixed with liquid water proof compound @ 200 ml per 50kg of cement and finished even and smooth surface without using extra cement as in sunken floor treatment etc complete all as specified and as directed Note : WPC shall measured and paid saperately under respective item) |
| 115 | M&L forrendering 15 mm thick in two layers 10mm +5mm in cement mortar 1:4 on external surfaces of brick work or concrete surfaces with using WPC finishing the surfaces even and smooth without using extra cement complete all as specified and directed.Note:- WPC will be measured and paid separately under respective item of this schedule. |
| 116 | M&L for 15mm thick rendering on other than fair faces in cement mortar 1:6 finished the surface even and smooth without using extra cement complete all as specified and directed. |
| 117 | M&L for preparing new plastered surface of walls with 2mm thick Birla/Asian wall care putty in two coats and and finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) etc complete all as specified and as directed |
| 118 | M&L for complete removal of existing treatment of walls and applying two coat of oil bond distemper white or any tint over a coat of primer over 01mm thick wall care putty etc complete as specified and directed. |
| 119 | M&L for complete removal of existing treatment of wall and preparing surface of walls with 1mm thick Birla/Asian wall care putty in two coats and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) etc complete all as specified and as directed |
| 120 | M&L forapplying one coat of white washing (Lime wash white) on ceiling surfaces including preparation of old decorated plastered /unplastered surface of ceiling by brooming down,scrapping cleaning & removing down smoke soot, moulds, moss and efflorescence etc complete all as specified and directed. |
| 121 | M&L for preparation of new undecorated surface of ceiling and applying three coats of white wash complete all as specified and directed. |
| 122 | Supply and laying of CPVC pipes outer diameter 20mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 123 | S&F in repair bib tap fancy type cast copper alloy chromium plated (long body) with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and directed. |
| 124 | S&F 15 mm bore pillar taps fancy type (long neck) cast copper alloy with hot & cold mixturechromium plated screwed down high pressure with or without letter hot or could with long screwed and shanks and fly nuts screwed for iron pipes complete all as specified and as directed. |
| 125 | S&F 0.50 mm thick stainless steel plate rack of overall size 24\"x36\"x10\" of standard quality and shape complete all as specified and directed. |
| 126 | S&F in repairLow density polyethylene(LDPE) pipes bore of pipe in 32mm of pressure rating6 kgf/sq. cmcomplete all as specified and directed |
| 127 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern) (excluding flushing cistern) including Pedestal pan and trap, and connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc.complete and include seat cover etc complete all as specified and directed. |
| 128 | S&F in repair Health faucet (ABS Body) mild steel CP suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook incl making connection and fixed in position complete all asspecifiedand directed. |
| 129 | S&F in repair Brass chromium plated shower rose 125mm size with or without swivel joints of standard size including fixing to 15mm steel pipe or union complete all as specified and as directed. |
| 130 | S&F in repair CP towel ring fixed with plugs and CP brass screws complete all asspecifiedand directed. |
| 131 | S&F in repair Corner glass shelf wall mounted of size 22.5cmx 22.5 cm, 8 mm thick tempered transparent glass heavy duty with CP bracket guard and railing fixed with plugs and CP brass screws complete all asspecifiedand directed. |
| 132 | S&F in repairPVC valveless, syphonic action type, flushing cistern, low level 10 ltr capacity , white, with inlet, ball valve, float and handle including brackets and connections to pipes and fixing of chain and pull, or lever, if any complete all asspecifiedand directed. |
| 133 | S&F in repair Vitreous china WHB 550x400mm size white flat backexcluding taps,waste, chain and plug and porcelain stopper but including bracketsincl cutting or pinning ends of brackets (including waste pipe) incl Waste coupling of PTMT (32 mm dia) (half or full threaded) (Minimum weight 32mm 45gms/40mm-60 gmcomplete all as specified and directed. |
| 134 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide 600mm long with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 135 | Demolition of cement concrete (reinforced )ofRoofs,floors(otherthan groundfloors), beams, staircases, landing, chajjas and similar suspendedwork including removal complete all as specified and directed. |
| 136 | Demolition of Concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 137 | S&F 35mm thick 2nd class hard wood glazed and skeleton factory made shutter open rebated and prepared to receive glass, gauge etc. without sash bars, any numbers edges of framing plain chamferred or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR part-I, Sec-08, Clause 8.24(a), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 138 | S&F 75 mm stainless steel butt hinges, medium weight, cold rolled, complete all as specified and directed. |
| 139 | S&F in repair mild steel Helical door spring 300mm long ordinary rat tail type incl roaller & roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed. |
| 140 | Taking down existing un-sreviceable water proofing treatment from roof slab and cleaning the roof by wire brush and removing WPT felt beyond the MOD premises etc. complete all as specified and directed. |
| 141 | S&F in repairs two way angle cock 15mm bore cast copper fancy CP alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 142 | M&L for waterproofing coating by providing and applying Fosroc Brushbond Roof Guard of FOSROC or equivalent of SIKA/STP , a single component High build fibre Reinforced Acrylic waterproofing render for roofing system applied by brush, at three coats at minimum dry film thickness of 1 mm, cured by reaction with atmospheric moisture to give a tough elastomeric waterproof membrane complete all as per manufacturer specification, specified and directed.Solid Content - 70%, Tensile strength ASTM D 412-1.10 Mpa, Elongation ASTM D12-100%, Resistance to ageing due to - 1000hours, UV radiation ASTM D4587 E - No Change, Rapid Chloride Penetration ASTM c 1202 - Very low, Pull off adhesion ASTM D541 - 0.92 Mpa, Resistance to Algae growth ASTM D 5589-97 - Passes, Zero rating, Permeability (mm) (BSEN 12390 part 8) -n 5.0, Water vapour transmission (ASTM E 96) - 6.0g/m2 h |
| 143 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc as per existing specification complete all as specified and directed. |
| 144 | M & L for concealed point wiring with two single core 1.5 sqmm PVC insulated, unsheathed, FRLSH cable, 1100 volts grade, ISI marked with multi stranded copper conductor with proper colour coding drawn through and including non-metallic PVC rigid conduit (medium grade) with all fittings and accessories ISI marked concealed in wall/fixed to roof,ceiling etc incl provision of 1.5 sqmm PVC insulated, multistranded, unsheathed, copper conductor cable, FRLSH, ISI marked as earth continuity conductor (green in colour) connected to common earth dolly incl fixing of modular metal flush boxes of appropriate size & thickness fixed flush to wall with modular back plate and top cover for mounting switch, sockets etc including cutting chases for conduits & sinkings for modular boxes & making good the disturbed surfaces, matching to the existing one etc. complete all as specified & as directed for the following :- Note: Consider 03 RM cutting chases amount for each point wiring rate. |
| 145 | One light point controlled by one switch |
| 146 | One fan point controlled by one switch |
| 147 | OneBell point controlled by one switch |
| 148 | One 3 pin socket outlet, 6 Amp on the same board with other switches |
| 149 | One 3 pin socket outlet, 6 Amp independent |
| 150 | One light point controlled by two, two way switch 5 Amp |
| 151 | M&L for concealed point wiring with FRLSH PVC insulated unsheathed multistranded copper conductor cables 1100 Volts grade of 2.5 sqmm size alongwith one earth continuity conductor with FRLSH PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade of 2.5 sqmm size through and including 20 mm dia (medium grade) rigid non metallic PVC concealed conduit terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet coverfor fixing of switches, sockets, fan regulators etc including testing on completion complete including cutting chases for concealed conduit pinning in making good to facing and pointing in using cement mortar 1:3 and making good to disturbed surface complete all as specified and directed. |
| 152 | Description all as per item No 145 here in before butusing 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly. |
| 153 | S&F Switch piano, flush type single pole, one way 16 Ampcomplete all as per specified and directed. |
| 154 | S&FModular switch 1 way 10A, 1 modulecomplete all as per specified and directed. |
| 155 | S&F Modular switch 2 way 10A, 1 modulecomplete all as per specified and directed. |
| 156 | S&FModular switch 1 way 16A, 1 modulecomplete all as per specified and directed. |
| 157 | S&FModular Bell push 6A 1 module,complete all as per specified and directed. |
| 158 | S&F Socket,6A - 2/3 pin combined 2 module,complete all as per specified and directed. |
| 159 | S&F Socket6A/16A - 2/3 pin combined2 module,complete all as per specified and directed. |
| 160 | S&F Fan step regulator, 120W - 2 modulecomplete all as per specified and directed. |
| 161 | S&F call bell ding dong 230V single pole complete all as per specified and directed. |
| 162 | S&F plug top 15 Amps PVC/Polycorbonate type suitable for 15 Amp socket complete all as per specified and directed. |
| 163 | S&F Socket outlet 2 in 1, 6 pin, 6 and 16 amp flush typecomplete all as per specified and directed. |
| 164 | Supply and fixing 240V, 10KA \"C\" curve single pole Isolator SPN 6 to 32Amps,in the MCB DB complete with connection testing and commissioning. complete all as specified and directed. |
| 165 | S&F Single Pole and neutral enclosure with a two pin and earth plug and socket complete with one single poleMCB 20Ampcomplete all as specified and directed. Make ABB/Legrand/Scheinder |
| 166 | S&F Sheet metal enclosure powder coatedfor MCB DB double door single pole & Neutral 4 way with 200Amp ratedcommon bus bar at incomming complete all as specified and directed. |
| 167 | S&F Sheet metal enclosure powder coated for MCB DB double door single pole & Neutral 12 way with 200Amp common bus bar at incomming complete all as specified and directed. |
| 168 | S&F Ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as per specified and directed. |
| 169 | M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth strip 25X4 mm by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 40 mm dia. light grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type ofsoil/strata and testing on completion. Note:- GI earth strip 25x4 mm and 40 mm dia GI pipe light for protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted. |
| 170 | Supply, installation, commissioning and testing LT wall mounting Panel Board of minimum size 1.00 m (height) x 1.00 m (breath) x 0.30m (depth) factory made CPRI approved panel, weather, dust & vermin proof indoor, double door, front openable and providing rubber/PVC gasket of suitable size all sides of door, with copper busbar wrapped with PVC tape/sleeves with maintained the colour code and copper strip/wire busbar of suitable size to MCCB input and MCCB/MCB output of suitable length for connection of cable from main busbar, made out of 2.00 mm thick mild steel CRCA sheet with suitable size angle iron supporting frame including applying two coats of Powder coated paint over a coat of red oxide zinc chrome primer over exposed external & internal surfaces suitable for 3 phase 4 wire system 415/440 volts grade including complete internal wiring with 1.5 sqmm copper wire and connections of all outgoing / incomming existing cable of any size complete all as directed by Engineer-in-Charge. |
| 171 | INCOMMING(a) Copper strip busbar of size 25 x 5 mm wrapped with PVC sleeves with maintained the colour code and provision of making holes with Copper nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends= 04 nos.(b)MCCBIP 44 and IP 66/67 protection, 4 pole, 415 volts, Lcu=25 KA breaking capacity, rating 63 Amps, adjustable thermal magnetic release including all fixing accessories with both ends spreader links -01 Nos.(c) Digital voltmeter of range (0-500) volts, flush mounting type of size 100mm x 100mm (4”x4”) square dial with selector switch – 01 Nos (d)LED Neon indicator lamp (RYB) with holder,230/250 volts,AC -01 set (set of three) |
| 172 | OUTGOING(a) MCB, Single pole & neutral, 32 amps, 240 volts, ‘C’ curve, 10 KA allcomplete as specified and as directed - 08 Nos (One no Meter input and one no for Accn output).(b) MCB, Single pole 6 amps, 240 volts, ‘C’ curve, 10 KA allcomplete as specified and as directed - 02 Nos (Stair case lighting)(c) Refixing of old electric meter - 04 Nos |
| 173 | M&L for sub main wiring with 2 run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 2.5 sqmm alongwith one run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 2.5 sqmm as earth continuity conductor drawn through and including 20 mm dia PVC conduit complete all as specified and directed.Note: For concealed sub-main wiring cutting chases will be included in quoted rate. |
| 174 | M&L for sub main wiring with 2 run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn through and including 20mm dia PVC conduit complete all as specified and directed.Note: For concealed sub-main wiring cutting chases will be included in quoted rate. |
| 175 | M&L for sub main wiring with 2 run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm alongwith one run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm as earth continuity conductor drawn through and including PVC conduit 25mm complete all as specified and directed.Note: For concealed sub-main wiring cutting chases will be included in quoted rate. |
| 176 | Supply, installation,commissioning of Water cooler having storage and nominal cooling capacity 40/80 ltrs partially stainless steel, electric driven single phase with 5 years compressor warranty and 1 year PCB warranty from manufacturer complete all as specified and directed. |
| 177 | Supply and fixing 240V, 10KA \"C\" curve single pole miniature circuit breaker (MCB) 6 to 32 Amps,in the MCB DB complete with connection testing and commissioning. complete all as specified and directed. |
| 178 | Supply and fixing240V, 10KA \"C\" curve SPN miniature circuit breaker (MCB) 40 to 63 Amps,in the MCB DB complete with connection testing and commissioning. complete all as specified and directed. |
| 179 | Supply and fixing BLDC ceiling fans 1200 mm sweep 230 volts 50 Hz, 5 star BEE rated with brushless direct current motor (BLDC), energy saving, 100 % copper wound motor complete with anti corrosive alluminium blades of minimum thickness 1.10 mm, powder coated finished, double ball bearingmaxmium wattage 26 to 32 watts, Min air delivery 220 (+/- 2%) CFM with service value above 6.50, ISI marked complete all as specified and as directed. |
| 180 | Supply and fixing LED tube light batten box type made of CRCA sheet with decorative end caps suitable with ultra bright glass LED tube light 1x 18/20 watt T8 type single side connection complete with both end bi-pin holder and all accessories internally prewired and fixed to wall/ceiling incl fittings accessories and connecting up with twin core flexible copper conductor cable suitable size complete all as specified and directed. |
| 181 | S&FDecorative wall mounted lumaineries made of metal with nickel finish wall lamp with opal glasssuitable B22 base type LED bulb 10Wcomplete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Make- Crompton Cat No WALLGLOW-C=B22 or equivalent of make specified. |
| 182 | S&F energy saving new generation 10 watt LED bulk head fitting made of aluminium die cast housing IP 65 luminaries with opal diffuser prewired with warranty option of 5 years from date of installation and necessarymounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulbcomplete all as specified and directed. |
| 183 | S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounitng arrangements and provision of 1.5 sq mm three core copper dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed. |
| 184 | S & F for energey efficient exhaust fan of 230mm sweep made of metal body ventil Air-DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base complete all as directed by GE. |
| 185 | S & F for energey efficient exhaust fan of 300mm sweep made of metal body ventil Air-DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base complete all as directed by GE. |
| 186 | S & F for wall mounted LED tube light fitting 10 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and directed. |
| 187 | Supply & fixing 2 Module socket with sutter 25Amps 240 Volts including Moduler Metal flush box and cover plate complete all as specified and directed. |
| 188 | Supply & fixing 2 Module starter switch 25 Amps 240 Volts including Moduler Metal flush box and cover Plate complete all as specified and directed. |
| 189 | Supply, installation and testing high wall split units indoor and outdoor complete with invertor technology with cordless remote control unit and with inbuilt air ioniser and plasma filter for better indoor air quality with PM 2.5 filter, BEE 5 Star rating of capacity 1.5 TR (Ton of refrigeration) with minimum cooling wattage 5500 watts with 10 years compressor warranty and 05 years PCB warranty from manufacturer including metal wall hunger of suitable size for fixing outdoor unit at wall complete all as specified and directed. |
| 190 | Taking down of Old MCB DB / control box any type any size including MCCB/MCBs, isolator etc and making good disturbed surface complete all as specified and directed. |
| 191 | Taking down of old sub main wiring any size and any type including batten/ conduit/ casing at any indicated situation complete all as specified and directed. |
| 192 | Supply and fix voltage stabilizer for automatic operation , single phase natuarally air cooled indoor type & designed for input variation between 170 V to 270 V with out put voltage stabilizer at 230 volt with accuracy of (+-) 2.5 % and of capacitry 15 Amps and of 5 KVA user friendly LED status indicator complete all as specified and directed. |
| 193 | S&F steel water tubes medium grade galvanised with all fittings fixed to wall for hanging of ceiling fan 50 mm complete all as specified and directed. |
| 194 | Taking down ceiling fan of any sweep, keeping safe custody and deposited to MES store yard complete all as specified and directed. |
| 195 | (Note : The Scope of Work contained in \"Sch of Credit\" amounting to Rs. 85,909.00 (refer Sch of credit). The Quoted sum shall be arrived at after deducting the amount of “Sch of Credit” from the total amount of the ‘BoQ’ |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
