|
| 1 | (A) GROUND FLOOR |
| 2 | SH : EARTH WORK |
| 3 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 4 | b) Lift above 1.5 m to 3.00 m |
| 5 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 6 | Supplying and filling in plinth with sandy soil under floors i/c watering, ramming consolidating and dressing complete |
| 7 | SH : CONCRETE WORKS |
| 8 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :(a) 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) |
| 9 | SH : R.C.C. WORKS |
| 10 | Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :(a)1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 11 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :(a)1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 12 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level,excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 13 | Reinforcement for R.C.C. work including straightening, cutting,bending, placing in positionand binding all complete (b) Thermo-Mechanically Treated bars. |
| 14 | FORM WORKS |
| 15 | Centering and shuttering including strutting, propping etc. and removal of form for(a) Foundations, footings, bases of columns, etc. for mass concrete |
| 16 | (b)Columns, Pillars, Piers, Abutments, Posts and Struts |
| 17 | (c) Lintels, beams, plinth beams, girders, bressumers and cantilevers, with water proof ply 12mm thick |
| 18 | ( d) Suspended floors, roofs, landings, balconies and access platform with water, proof ply 12mm thick |
| 19 | (e)Edges of slabs and breaks in floors and walls Under 20 cm wide |
| 20 | (f)Stairs, ( excluding landing) except spiral-staircases. |
| 21 | BRICKS WORKS |
| 22 | Brick work with 1st class common burnt clay F.P.S. (non modular) bricks in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 23 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1cement :4 coarse sand) |
| 24 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).(a)Local best quality teak wood |
| 25 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows i/c ISI marked MS butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately,, all complete as per direction of Engineer-in-charge. (a) Local best quality teak wood, 35 mm thick shutter |
| 26 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows( Area of opening for panel insers excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25mm to 40 mm thick), (a) Local best quality teak wood |
| 27 | Providing 40x5mm flat iron hold fast 40cm long i/c fixing to frames with 10mm dia bolts, nuts and wooden plugs and embedding to cement concrete block 30x10x15cm 1:3:6 (1 cement : 3coarse sand:: 6 stone aggrt. 20mm nominal guage). |
| 28 | Providing and fixing bright finished brass door latch with necessary screws etc. complete : 300x16x5 mm |
| 29 | Providing and fixing bright finished brass towerbolts (barrel type)with necessary screws etc. complete :.a)250 x 10 mm |
| 30 | Providing and fixing bright finished brass handles with screws etc.complete :.(a) 125mm |
| 31 | Steel glazed windows and ventilators of standard rolled steel section joints mitred and welded with 15 x 3 mm lugs 10 cm long with steel plugs embedded in cement concrete block 15 x 10 x 10 cm of 1:3:6 (1 cement : 3coarse sand : 6 stone aggregate 20 mm nominal size) or wooden plugs and screws of rawl plugs and screws or with fixing clips with bolts and nuts as required including providing and fixing of 4 mm thick glass panes with glazing clips complete including applying a priming coat of approved steel primer excluding cost of metal beadings and other fittings except necessary hinges or pivots as required.b) Ready made steel windows (side hung/top hung) |
| 32 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Double charge vitrified tile polished finish of size i) Size of Tile 600x600 mm |
| 33 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed ofcement mortar 1:3 (1 cement : 3coarse sand), jointing, grouting the joint with white cement and matching pigments etc.,complete. (a) Size of Tile 600x600 mm |
| 34 | Marble stone flooring with 18mm thick marble stone (sample of marble shall be approved by Engineer-in-charge) over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with : Makrana white second quality. |
| 35 | Marble chips skirting (upto 30 cm height) rubbed and polished to granolithic finish, top layer 6 mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from smallest to 4 mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 marble chips) by volume :18 mm thick with under layer 12 mm thick in cement plaster 1:3 (1 cement: 3coarse sand): Dark shade pigment with ordinary cement with extra for marble stone flooring in treads of steps and risers usingsingle length upto 2.00 metre . |
| 36 | SH : FINISHING |
| 37 | 12mm cement plaster of mix 1:4 (1 cement : 4 coarse sand). |
| 38 | 15mm cement plaster on rough side of single or half brick wall of mix1:4 (1 cement : 4 coarse sand). |
| 39 | 15 mm cement plaster 1:3(1 cement:3 coarse sand)finished with a floating coat of neat cement on the roughside of single or half brick wall |
| 40 | Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacturer, over the plastered wall surface to prepare thesurface even and smooth complete |
| 41 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.(a)water thinnable cement primer |
| 42 | Finishing walls with Acrylic Smooth exterior paint of required shade:- new work (two or more coat applied @ 1.67 ltr/10sqm over and i/c base coat of water proofing cement paint applied @2.20 kg/10sqm. |
| 43 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade.(a) two or more coats on new work. |
| 44 | Applying priming coats:-With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 45 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture |
| 46 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture. |
| 47 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand: 6 graded stone aggregate 20 mm nominal size ) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, includingfinishing the top smooth |
| 48 | 2nd class brick masonary 15x15cm open surface drain in c.m. 1: 5(1cem : 5 Localsand) i/c earth excavation 10cm bed c.c.1: 5 : 10 1cem : 5 Localsand :10gr.st.aggrt.40mm n/size i/c 12mm thick cement plaster 1: 3 (1cem : 3 Localsand) with a floating coat of neat cement inside & outside as per standard design. |
| 49 | (B) FIRST FLOOR |
| 50 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :(a)1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 51 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level,excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 52 | Reinforcement for R.C.C. work including straightening, cutting,bending, placing in positionand binding all complete (b) Thermo-Mechanically Treated bars. |
| 53 | FORM WORKS |
| 54 | Centering and shuttering including strutting, propping etc. and removal of form for |
| 55 | (b)Columns, Pillars, Piers, Abutments, Posts and Struts |
| 56 | (c) Lintels, beams, plinth beams, girders, bressumers and cantilevers, with water proof ply 12mm thick |
| 57 | ( d) Suspended floors, roofs, landings, balconies and access platform with water, proof ply 12mm thick |
| 58 | (e)Edges of slabs and breaks in floors and walls Under 20 cm wide |
| 59 | (f)Stairs, ( excluding landing) except spiral-staircases. |
| 60 | BRICKS WORKS |
| 61 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1cement :4 coarse sand) |
| 62 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).(a)Local best quality teak wood |
| 63 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows i/c ISI marked MS butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately,, all complete as per direction of Engineer-in-charge. (a) Local best quality teak wood, 35 mm thick shutter |
| 64 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows( Area of opening for panel insers excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25mm to 40 mm thick), (a) Local best quality teak wood |
| 65 | Providing 40x5mm flat iron hold fast 40cm long i/c fixing to frames with 10mm dia bolts, nuts and wooden plugs and embedding to cement concrete block 30x10x15cm 1:3:6 (1 cement : 3coarse sand:: 6 stone aggrt. 20mm nominal guage). |
| 66 | Providing and fixing bright finished brass door latch with necessary screws etc. complete : 300x16x5 mm |
| 67 | Providing and fixing bright finished brass towerbolts (barrel type)with necessary screws etc. complete :.a)250 x 10 mm |
| 68 | Providing and fixing bright finished brass handles with screws etc.complete :.(a) 125mm |
| 69 | Steel glazed windows and ventilators of standard rolled steel section joints mitred and welded with 15 x 3 mm lugs 10 cm long with steel plugs embedded in cement concrete block 15 x 10 x 10 cm of 1:3:6 (1 cement : 3coarse sand : 6 stone aggregate 20 mm nominal size) or wooden plugs and screws of rawl plugs and screws or with fixing clips with bolts and nuts as required including providing and fixing of 4 mm thick glass panes with glazing clips complete including applying a priming coat of approved steel primer excluding cost of metal beadings and other fittings except necessary hinges or pivots as required.b) Ready made steel windows (side hung/top hung) |
| 70 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Double charge vitrified tile polished finish of size i) Size of Tile 600x600 mm |
| 71 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed ofcement mortar 1:3 (1 cement : 3coarse sand), jointing, grouting the joint with white cement and matching pigments etc.,complete. (a) Size of Tile 600x600 mm |
| 72 | Marble stone flooring with 18mm thick marble stone (sample of marble shall be approved by Engineer-in-charge) over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with : Makrana white second quality. |
| 73 | Marble chips skirting (upto 30 cm height) rubbed and polished to granolithic finish, top layer 6 mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from smallest to 4 mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 marble chips) by volume :18 mm thick with under layer 12 mm thick in cement plaster 1:3 (1 cement: 3coarse sand): Dark shade pigment with ordinary cement with extra for marble stone flooring in treads of steps and risers usingsingle length upto 2.00 metre . |
| 74 | SH : FINISHING |
| 75 | 12mm cement plaster of mix 1:4 (1 cement : 4 coarse sand). |
| 76 | 15mm cement plaster on rough side of single or half brick wall of mix1:4 (1 cement : 4 coarse sand). |
| 77 | Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacturer, over the plastered wall surface to prepare thesurface even and smooth complete |
| 78 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.(a)water thinnable cement primer |
| 79 | Finishing walls with Acrylic Smooth exterior paint of required shade:- new work (two or more coat applied @ 1.67 ltr/10sqm over and i/c base coat of water proofing cement paint applied @2.20 kg/10sqm. |
| 80 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade.(a) two or more coats on new work. |
| 81 | Applying priming coats:-With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 82 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture |
| 83 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture. |
| 84 | (C) SECOND FLOOR |
| 85 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :(a)1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 86 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level,excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 87 | Reinforcement for R.C.C. work including straightening, cutting,bending, placing in positionand binding all complete (b) Thermo-Mechanically Treated bars. |
| 88 | FORM WORKS |
| 89 | Centering and shuttering including strutting, propping etc. and removal of form for |
| 90 | (b)Columns, Pillars, Piers, Abutments, Posts and Struts |
| 91 | (c) Lintels, beams, plinth beams, girders, bressumers and cantilevers, with water proof ply 12mm thick |
| 92 | ( d) Suspended floors, roofs, landings, balconies and access platform with water, proof ply 12mm thick |
| 93 | (e)Edges of slabs and breaks in floors and walls Under 20 cm wide |
| 94 | (f)Stairs, ( excluding landing) except spiral-staircases. |
| 95 | BRICKS WORKS |
| 96 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1cement :4 coarse sand) |
| 97 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).(a)Local best quality teak wood |
| 98 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows i/c ISI marked MS butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately,, all complete as per direction of Engineer-in-charge. (a) Local best quality teak wood, 35 mm thick shutter |
| 99 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows( Area of opening for panel insers excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25mm to 40 mm thick), (a) Local best quality teak wood |
| 100 | Providing 40x5mm flat iron hold fast 40cm long i/c fixing to frames with 10mm dia bolts, nuts and wooden plugs and embedding to cement concrete block 30x10x15cm 1:3:6 (1 cement : 3coarse sand:: 6 stone aggrt. 20mm nominal guage). |
| 101 | Providing and fixing bright finished brass door latch with necessary screws etc. complete : 300x16x5 mm |
| 102 | Providing and fixing bright finished brass towerbolts (barrel type)with necessary screws etc. complete :.a)250 x 10 mm |
| 103 | Providing and fixing bright finished brass handles with screws etc.complete :.(a) 125mm |
| 104 | Steel glazed windows and ventilators of standard rolled steel section joints mitred and welded with 15 x 3 mm lugs 10 cm long with steel plugs embedded in cement concrete block 15 x 10 x 10 cm of 1:3:6 (1 cement : 3coarse sand : 6 stone aggregate 20 mm nominal size) or wooden plugs and screws of rawl plugs and screws or with fixing clips with bolts and nuts as required including providing and fixing of 4 mm thick glass panes with glazing clips complete including applying a priming coat of approved steel primer excluding cost of metal beadings and other fittings except necessary hinges or pivots as required.b) Ready made steel windows (side hung/top hung) |
| 105 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Double charge vitrified tile polished finish of size i) Size of Tile 600x600 mm |
| 106 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed ofcement mortar 1:3 (1 cement : 3coarse sand), jointing, grouting the joint with white cement and matching pigments etc.,complete. (a) Size of Tile 600x600 mm |
| 107 | Marble stone flooring with 18mm thick marble stone (sample of marble shall be approved by Engineer-in-charge) over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with : Makrana white second quality. |
| 108 | Marble chips skirting (upto 30 cm height) rubbed and polished to granolithic finish, top layer 6 mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from smallest to 4 mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 marble chips) by volume :18 mm thick with under layer 12 mm thick in cement plaster 1:3 (1 cement: 3coarse sand): Dark shade pigment with ordinary cement with extra for marble stone flooring in treads of steps and risers usingsingle length upto 2.00 metre . |
| 109 | Providing & fixing M.S. round holding down or anchor bolts with nuts & washer plates complete. |
| 110 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. i) Electric resistance or induction butt welded tubes |
| 111 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required with (a)precoated galvanised iron profile sheets 0.50 mm thick. |
| 112 | Providing and fixing precoated galvanised steel sheet roofing accessories, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I seam bolts and nuts, G.I plain and bitumen washers complete :Ridges plain (500 - 600mm) (a) precoated galvanised iron profile sheets 0.50 mm thick. |
| 113 | Extra for providing and fixing wind ties of 40x 6 mm flat iron section. |
| 114 | Providing and fixingfalse ceiling at all height including providing and fixing of frame work made of special section, power pressed from MS sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS:277 and consisting of angle cleats of size 25 mm wide X 1.6 mm thick with flages of 27mm and 37 mm,at1200mm centre to centre,one flanges fixed to the ceiling with dash fastener 12.5mm dia 50mm long with 6mm dia bolts, other flanges of cleat fixed to the angle hangers of 25x25x0.55 mm of required length with nuts and bolts of required size and the other end of the angle hanger fixed with intermediate G.I channels 45x 15x0.9 mm running at the spacing of 1200mm centre to centre to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre, shall be fixed in a direction perpendicular to GI intermadiate channel with connecting clips made out of 2.64mm dia x 230mm long GI wire at every junction, i/c fixing perimetre channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre, with25mm long drive-all screws@230mm interval i/c fixing of gypsum board to ceiling section and perimetre channel with the help of dry wall screws of size 3.5x25mm at 230mm etc.,i/c jointing and |
| 115 | finishing to a flash finish of tapered and squre edges of the board with recommended jointing compound, jointing tapes,finishing with jpinting compound in 3 layers covering upto 150mm on both sides of joints and two coats of primer suitable for board, allas per manufacture specification and also i/c the cost of making opening for light fittings,grills,diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawings and specification and direction of the Engineer in charge but e/c the cost of painting with (i) Fully Perforated Gypsum Plaster Board of size 1200X2400X12.5 mm having approx. 15% perforated area with perforation size and pattern as approved by the Engineer-in charge and as per manufacture specification, with all 4 sides tapered and backed by acoustical tissue with NRC value not less than0.60. |
| 116 | Providing and fixing 20mm plank as eave board with :- a)Tolhao/Uchan wood. |
| 117 | SH : FINISHING |
| 118 | 12mm cement plaster of mix 1:4 (1 cement : 4 coarse sand). |
| 119 | 15mm cement plaster on rough side of single or half brick wall of mix1:4 (1 cement : 4 coarse sand). |
| 120 | Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacturer, over the plastered wall surface to prepare thesurface even and smooth complete |
| 121 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.(a)water thinnable cement primer |
| 122 | Finishing walls with Acrylic Smooth exterior paint of required shade:- new work (two or more coat applied @ 1.67 ltr/10sqm over and i/c base coat of water proofing cement paint applied @2.20 kg/10sqm. |
| 123 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade.(a) two or more coats on new work. |
| 124 | Applying priming coats:-With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 125 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture |
| 126 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture. |
| 127 | (C) Water Supply & Sanitary Installation |
| 128 | Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed,within a lead of 50 m.(i) All kinds of soil. |
| 129 | Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 130 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering : All work upto plinth level (a)1:3:6 (1 cem :3Coarse Sand:6 graded stone aggrt.40mm n/size). |
| 131 | (b) 1:2:4 (1 cem :2 LocalLocal coarse sand:4 graded stone aggrt.20mm n/size). |
| 132 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement :1.5 Local coarse sand:3 graded stone aggregate 20 mm nominal size.) |
| 133 | Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete up to plinth level/Above Plinth level. ( a )Thermo-Mechanically Treated bars |
| 134 | Centering and shuttering including strutting, propping etc. and removal of form for: (a) Lintels, beams, plinth beams, girders, bressumers and cantilevers, with water proof ply 12mm thick |
| 135 | (b) Suspended floors, roofs, landings, balconies and access platform,with water proof ply 12mm thick. |
| 136 | (C) Edges of slab and breaks in floors and walls (i) Under 20cm wide |
| 137 | Brick work with Ist class common burnt clay F.P.S. (non modular)bricks in foundation and plinth in: (i) (1 Cem: 4 LocalC/Sand) |
| 138 | Half brick masonry with Ist class common burnt clay F.P.S. (non modular) bricks in foundation and plinth : (i)cement mortar 1:4 (1 cement : 4Local Local coarse sand) |
| 139 | 15 mm cement plaster 1:3 (1 cement: 3 Local coarse sand) finished with afloating coat of neat cement on the roughside of single or half brick wall. |
| 140 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. |
| 141 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms |
| 142 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : (i) W.C. pan with ISI marked white solid plastic seat and lid. |
| 143 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make,including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass |
| 144 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :(a) 15 mm nominal bore |
| 145 | P/F Brass full way valve with C.I. wheel (screwed end) (i) 25mm dia. |
| 146 | (ii) 32mm dia. |
| 147 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete |
| 148 | Providing and fixing C.P brass shower rose with 15 or 20 mm inlet (B) 150 mm dia |
| 149 | P/F C.I. Cover with frame (for manhole and chambers) (i) 600 mm x 450 mm (heavy duty) (38 Kg) |
| 150 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (a) External Works.(i) 32mm dia. nominal outer dia Pipes |
| 151 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.(A) Internal Concealed work, including cutting chases and making good the wall etc.(i) 15 mm nominal outer dia Pipes |
| 152 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 153 | (D ) Ground Sump 20 KL Capacity - 1nos |
| 154 | Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, including getting out the excavated soil and disposal of surplus excavated soil as directed,within a lead of 50 m.(i) All kinds of soil.(a) Lift upto 1.5 m, |
| 155 | Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 156 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering : All work upto plinth level (a)C.C. 1:3:6 (1 cem :3 Local coarse sand:6 graded stone aggrt.40mm n/size). |
| 157 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (a)1:1.5:3 (1 cement :1.5 Local coarse sand:3 graded stone aggregate 20 mm nominal size.) |
| 158 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement :(a)1:1.5:3 (1 cement :1.5 Local coarse sand:3 graded stone aggregate 20 mm nominal size.) |
| 159 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement :1.5 Local coarse sand:3 graded stone aggregate 20 mm nominal size.) |
| 160 | Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete up to plinth level/Above Plinth level. ( a )Thermo-Mechanically Treated bars |
| 161 | Centering and shuttering including strutting, propping etc. and removal of form for: (a) Foundation footings, bases of columns etc. and mass concrete. |
| 162 | (b ) Suspended floors, roofs, landings, balconies and access platform,with water proof ply 12mm thick. |
| 163 | (d) Walls (any thickness) including attached pilasters, buttresses,plinth and string courses etc. |
| 164 | (e)Edges of slab and breaks in floors and walls (i) Under 20cm wide |
| 165 | 15 mm cement plaster 1:3 (1 cement: 3 Local coarse sand) finished with afloating coat of neat cement on the roughside of single or half brick wall. |
| 166 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (a) External Works.(i) 32mm dia. nominal outer dia Pipes |
| 167 | P/F C.I. Cover with frame (for manhole and chambers) (i) 600 mm x 450 mm (heavy duty) (38 Kg) |
| 168 | (E ) Providing IEI works |
| 169 | Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit with modular typeswitch, modular platesuitable size G.I. and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc.as reqd. |
| 170 | Group A |
| 171 | Group B |
| 172 | Group C |
| 173 | Wiring for light point/power plug with 2X4mm2 FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit with 1 No. 4mm2 FR PVC insulated copper conductor single core cable for loop earthing etc.as reqd. |
| 174 | Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in surface/recessed PVC conduit etc.as reqd. |
| 175 | 2X1.5mm2+1X1.5mm2 earth wire |
| 176 | 2X2.5mm2+1X2.5mm2 earth wire |
| 177 | 2X4mm2+1X4mm2 earth wire |
| 178 | 2X10mm2+1X10mm2 earth wire |
| 179 | Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in surface/recessed PVC conduit etc.as reqd. |
| 180 | 2X16mm2+1X16mm2 earth wire |
| 181 | Supply and fixing (following modular type switch/socket) on the existing switch box/cover i/c connection etc as reqd. |
| 182 | 5/6 amps switch |
| 183 | 15/16 amps switch |
| 184 | 3 pin 5/6 amps socket outlet |
| 185 | 6 pin 15/16 amps socket outlet |
| 186 | P/L 50mm2 3.5 core pvc ins.(heavy duty) Al. cond. armoured cable of 1.IKV grade in size not exceedng 25mm2 direct in ground i/c excavation, sand cushioning protective covering and refilling the trench etc.as reqd. |
| 187 | S/F brass batten/angle holder i/c connection etc.as reqd. |
| 188 | S/F 9W LEDbulb |
| 189 | SITC surface mounted LED downlighter with powder coated A.I. housing with integrated electronic driver 15W 840 LHEAAGPIA2W012 complete with connection etc as reqd( Harvell\"s) |
| 190 | S/F fan hook i/c bolt & nuts. |
| 191 | S/F 48\"sweep (1200mm) AC ceiling fan complete with down rod,canopy, 3 (three) blades with regulator etc.as reqd. |
| 192 | S/F stepped type electronic fan regulator on the existing modular plate switch box i/c connection but excluding modular plate etc. as reqd. |
| 193 | Installation of exhaust fan upto 450mm sweep in the existing opening i/c making the hole to suit the size of the above fan, making good the damaged, connection testing commissioningetc. as reqd. |
| 194 | S/F 12\"(305mm) dia light duty exhaust fan complete with all accessories(usha/ Bajaj/ Orient) |
| 195 | SITC 50W LED 5000K energy saving IP 65 Flood Light luminaries with high power COB LED as light source Havell\"s JETACOMPECT OF 50W LED 757LTG complete with connection as rqd. (Havell\"s) |
| 196 | Design, supply, installation testing and commissioning of L.T.Panel board of dust and vermin proof mounted with thickness of 16 SWG metal clad sheet with suitable for use at 3- Phase, 4 pole,50 Hz 415V fitted with the following switch gears of four way outgoing conforming to IS/IEC:60947-2, HSN Code 8537 :- |
| 197 | 1. 200 amp. TPN on load changeover switch -1 No. |
| 198 | 2. 200 amp. TPN bus bar chamber- 1 No. |
| 199 | 3. 125 amp. TPN thermal adjustable MCCB - 4 Nos. |
| 200 | 4. Prewired module Ammeter, voltmeter with selector switch and indicator lamp (Digital) |
| 201 | S/F wall/floor mounted metal board of welded constn.fabricated with minimum 50mm X 50mm X6mm angle iron frame work with horizontal and vertical intermediate members of suitable angle/flat iron for mounting of switch gear i/c painting etc. |
| 202 | S/F bus bar chamber with 4 strips copper bus bar length 300mm suitable for 100 amp capacity complete with all accessories i/c connection earthing the body etc.as reqd. |
| 203 | P/F 125 amp. TPN stand ground on load change over switch (Compact design) 415/500V including connection etc as reqd. |
| 204 | S/F (following way) single/double pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+6 way |
| 205 | S/F 5 amp to 32 amp rating 230V \"B\" series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole |
| 206 | (a) 10 amp. |
| 207 | (b) 20 amp. |
| 208 | Supplying & fixing (following rating) double pole 240V isolatorin existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp |
| 209 | P/F 300x450x60mm(n/size) with permissible variation of plus minus 5mm in size hylum fibre board complete with locking arrangement and painting etc. |
| 210 | Earthing with G.I.earth pipe 4.5mt.long and 40 mm dia. i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.as reqd. |
| 211 | Extra for using salt and charcoal for pipe electrode as reqd. |
| 212 | P/F 4.06mm dia.copper wire on surface or in recess for loop earthing etc.as reqd. |
| 213 | S/F swaged type steel tubular pole 8 mt. long as per 410 SP 14 conforming to IS 2713 (Pt.II) 1980 with bracket in cement concrete 1:3:6 (1:cemeny :3 c/sand :6 gr. St.40 mm n/size) foundation i/c excavation and refilling et. As reqd. |
| 214 | Supply and drawing of AB cable of size (3x50+1x35)mm2. |
| 215 | Cross arm 50X50X6 mm2 wire. |
| 216 | Back clamp for cross arm 50X50X6 mm. |
| 217 | S/F stay set complete with stay wire & stay insulator etc. as reqd. |
| 218 | Supply & installation of carbon diaoxide type fire extinguisher (suitable for fires involving materials like oil, electric & delicate machinaries). Capacity : 4.5 kg (ISI marked). |
| 219 | Supply & installation of Dry Powder (Stored Pressure) fire extinguisher suitable for fires involving combustible lide wood, paper, cloth etc. capacity : 4 kg (ISI marked). |
