|
| 1 | B & R Division Items |
| 2 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified & directed. |
| 3 | Demolition of brick/stone masonry, built in cement mortar including all quoins, arches, pillars etc but exluding ashlars facings, dressed stone work and pre-cast concrete articles all as directed. |
| 4 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises |
| 5 | Dismantling mild steel work or wrought iron of any description and in any position complete all as specified and as directed. |
| 6 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness as in roof coverings, chajja, wall clading and the like complete all as specified and directed |
| 7 | Dismantling of boarding any description fixed in position with screws complete all as specified and directed by Engr-in-Charge. |
| 8 | Dismantling of wall and ceiling boards (fibre, pulp, insulation boards etc) any thickness including cover fillets. |
| 9 | Taking down cement plaster on brick or stone walls etc, including raking out joints, hacking for key scrubing down with water etc complete all as specified and as directed. |
| 10 | Taking down chowkats or frames with Shutters (without taking off shutters from the frame) not exc. 1.5 sq. m each complete all as specified & directed. |
| 11 | Taking down chowkats or frames with Shutters (without taking off shutters from the frame) exc. 1.5 sq. m but not exc. 4 sq. m each complete all as specified & directed. |
| 12 | Excavating in post holes each n exc 0.5 cum, getting out, in soft /loose soil, ramming earth filling or borken rubble mixed with earth around in layers nexc 25 cm watering and removing ssurfaces soil to distance nexc 50 m and making good surfaces all as specified and directed. |
| 13 | M&L for PCC (1:4:8), Type D2 using 40 mm graded stoneaggregate as in foundations, sub-base,filling and mass concrete complete all as specified. |
| 14 | M&Lfor providing 75 mm thick plain cement concrete (1:3:6) type C-2 using (40mm gradedstone aggregate) as in plinth protection, Sub base of floor, flooring, pavings ad similar work complete all as specified. |
| 15 | M&L for 40mm thick plain cement concrete 1:2:4 type B-0 12.5 mm crushed stone aggreagate in shape to horizontal or vertical surfaces as in Damp proof course (DPC) including necessary formwork complete all specified & directed. |
| 16 | Use and waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished flat surfaces of concrete complete all as specified and as directed. |
| 17 | Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished flat surfaces of concreteall as specified and directed. |
| 18 | Use and waste of formwork to edges of concrete flats, treads, window cills, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but not exc 20cm wide rough finished flat surfaces |
| 19 | Material and labour for providing Reinforced Cement Concrete (Nominal mix) (1:1.5:3) type A1 using 20 mm graded aggregate as in foundation including rafts, footings,foundationbeams, plinth beams, bases of columns etc all as specified and directed. |
| 20 | Material and labour for providing Reinforced Cement Concrete (Nominal Mix) 1:1.5:3 type A1using 20 mm graded aggregate as in columns, pillars, piers, posts and struts complete all as specified and directed. |
| 21 | Material and labour for providing Reinforced Cement Concrete (Nominal Mix) 1:1.5:3 type A1 using 20 mm graded aggregate as in cill band, similar items complete all as specified and directed. |
| 22 | Material and labour for providing Reinforced Cement Concrete (Nominal Mix) 1:1.5:3 type A1 using 20 mm graded aggregate as in beams, cantilever, lintels over 1.5 m complete all as specified and directed. |
| 23 | M & Lfor 10mm dia and over TMT bars, cut to length bend to shape as required including cranking, hooking etc and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 24 | M & Lfor 6mm to 8mm dia and over TMT bars, cut to length bend to shape as required including cranking, hooking etc and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 25 | M & Lfor Mild Steel TMT Bar 6mm dia and over up to 10 mm dia as in stirrups, spacers and binders as required including cranking, hooking etc and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed |
| 26 | M & L for brickwork with subclass \"B\" or locally available best qualityold size bricks, straight or curved on plan exc 6 m mean raduis,built in CM (1:6) complete all as specified and directed. |
| 27 | M & L for brickwork with subclass \"B\" or locally available best qualityold size bricks, straight or curved on plan exc 6 m mean raduis,built in CM (1:4) as half brick thick wall complete all as specified & directed. |
| 28 | Material and labour for Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) on wall surface and finishing even and fair complete all as specified and directed |
| 29 | Material and labour for Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) on wall surface and finishing even and fair complete all as specified and directed |
| 30 | Material and labour for Rendering 10+5mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) on wall surface with top 5 mm second layer mixed with water proofing compound and finishing even and fare complete all as specified and directed.NOTE : Water proofing compound shall be measured & paid separately. |
| 31 | Supply only integral water proofing compound complete all as specified and directed. |
| 32 | M& L for Vetrified Ceramic tiles light shade8 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including 15 mm thick screed bed or bedding layers in cement mortar 1:6 over brushing with neat cement slurry as specified |
| 33 | M& L for Vetrified Ceramic tiles light shade8 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm set as in skirting / dado with set and jointed in neat cement slurry and pointed in white or colour cement to match over & including10mm thick screed bed or backing coat in cement mortar 1:4layingof skirting/dado on walls all as specified and directed. |
| 34 | Material and labour for rubber moulded Chequered coloured glossy finished cement concrete tiles 300x300x25 mm thick laying in floor, set & jointed and pointed in neat cement slurry in floor with white or coloured cement and pigment over & including 15 mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified. |
| 35 | Supply & Fix Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, railings, and similar work conforming to Fe.290.Gde-E-165 complete all as specified & directed. |
| 36 | Supply and fix Steel work in trusses, purlins, posts and the like using tubular/ square hollow sections including special shaped washer etc. complete using ERW or induction butt welded tubes/SHS conforming to IS.1161 - 2014 / IS.4923 - 1997 grade St.-240 complete all as specified and directed |
| 37 | S&F Rolled Mild Steel Fe 410 -W (Gde- E- 250) quality- A in Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified & directed. |
| 38 | Supply and fix Fe-410- W(Gde- E-250) quality- B MS plates plain cut to required size, forming holes to receive holding down bolt and welded to tubular/square hollow section truss at both ends complete all as specified and directed |
| 39 | Supply and fix mild steel screw bolts 11 to 15 mm dia (machine made) with hexagonal or square heads at one end and screwed at the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,exc 22.50cm and n exc 30cm long complete all as specified and directed |
| 40 | S & F bands, straps,clamps,cleats & small articles, supports or stays for rainwater,ventilating pipes, including bolts etc conforming to Fe-290 Gde-E-165 all as specified and directed. |
| 41 | S&F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roofcovering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. |
| 42 | S&F for Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roofcovering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. |
| 43 | S&F factory made 35mm thick plain framed 2nd cl hardwood panelled shutter (two panels ) with lock rail & panel of 9mm BWP commercial ply or 12mm veneered particle with commercial veneering on both face, the size of rail and style as per IS 1003 (Part-1) kiln seasoned and chemically pressed, treated complete incl 15 to 20 mm tapering bedding on one face of second cl hardwood fitted to chowkhats complete all as specified. |
| 44 | S&F factory made2nd class 35 mm thick hardwood glazed and skelton shuttersopen rebated and prepared to receive glass / gauze etc ( with or without sash bars)divided into square with plain, chamfered or rounded fixed with cut : mitered beads for receiving gauge etcsize of members of shutters as specified in SSR Part-I section 8 cluse 8.24(a) complete all as specified. |
| 45 | Supply and fix 3 ways sliding anodized aluminium glazed window shutter with frame with the following specification all as specified & directed.(a) Window frame 3 track of size 95mm x 25mm x 1.5mm thick(b) Stiles and rails of size 35mm x 25mm x 1.5mm(c) 35mm x 35 x 1.5mm T section mullion (d) PVC gasket with 4mm thick tinted glass, incl. aluminium handles with necessary locking arrangement for 02 Nos glazed shutter(e) Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples incl. aluminium handles with necessary locking arrangement for 01 No gauzed shutterNote : Measurement to be taken as overall width and height of window. No shutter or frame to be measured separately. All necessary accessories including tinted glass and stainless steel wire cloth required for assembling and fixing window at proper place complete are deemed to be inclusive. |
| 46 | Supply and fix 2 way sliding anodized aluminium glazed ventilator shutter with frame consists of following specification all as specified & directed.(a) Ventilator frame 2 track of size 60mmx25mmx1.5mm thick(b) Stiles and rails of size 35mmx25mmx1.5mm(c) 35mmx35x1.5mm T section mullion(d) PVC gasket with 4mm thick tinted glass, incl. aluminium handles with necessary locking arrangementNote : Measurement to be taken as overall width and height of ventilator. No shutter or frame to be measured separately. All necessary accessories including tinted glass required for assembling and fixing window at proper place complete are deemed to be inclusive. |
| 47 | Material and Labour for Plain cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate as in bed block or hold fast block etc complete all as specified and directed. |
| 48 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of apertue 1.40mm and fixed with stainless steel wire staples complete all as specified. |
| 49 | S&F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified & directed. |
| 50 | Supply and fix 100 mm size stainless steel butt hinges (ISI marked) with stainless steel screws all as specified and directed. |
| 51 | Supply and fix for 150mm extruded Aluminium alloy handles, cast type all as specified & directed. |
| 52 | Supply and fix for 200mm long Aluminium, anodised, barrel tower bolts of extruded section all as specified & directed. |
| 53 | S/F Alluminium extruded section door closer hydraulically regulated designation no 3,universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed all as directed. |
| 54 | S&F as in repairs 25 mm dia and 1mm thick MS chromium platedcurtain rods with fixing side fancy type brackets end knobs fixed with steel screws etc all as specified and directed . |
| 55 | Providing & fixing false ceiling with semi perforated 12 mm thick micro tegular edged of 10 mm thick square edgeat all heights with GRG (glass fiber reinforced Gypsum ) false ceiling tiles of size 595X595 of approved texture design and patter having moisture contain less than 2%, humidity resistance of 99%,NCR 0.50 to 0.75 as per IS 8225, 1987, non combustible as per BS 475Part -IV1970 and light reflectance of 85 % minimum to laid in true horizontal level suspended on interlocking metal T grid of hot dipped galvanized iron section of 0.33 mm thick ( galvanized @ 120 gms per sqmincluding both side comprising of main T runner of size 15X 32 mm of length of 3000 mm , cross T of size 15 X 32 mm of length 1200 mm and secondary intermediate crass T of size 15 X 32 of length of 600 mm to form grid module of size 600 X 600 mm suspended from ceiling using galvanized metal sheet item (galvanized @ 80 per sqm ie 50 mm long 8 mm outer dia meter M-6 , fasteners , 6 mm dia fully threaded hanger rod up to 1000 mm length and L shape level adjusters of size 85 X 25 galvanizediron perimeter wall angle of size 24 X24 X 0.40 mm of length 3000 mm to be fixed on perimeter of wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40 mm long dry wall wood screw . The work shall be carried out as per specification drg and as per direction of Engr-in-Charge. |
| 56 | Material and Labour for applying 1mm thick wall care putty on new or previously untreated plastered surfaces of walls, including preparation, to make the surface even and smooth all as specified and directed. |
| 57 | Material and Labour for applying two coats of acrylic distemper over a coat of alkali resistant primer including preparation of newly / old plastered surfaces, all as specified and directed. |
| 58 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over newly / oldsurfaces complete all as specified & directed. |
| 59 | Material and labour for preparation of new steel or iron surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed. |
| 60 | M & L for applying two coats of synthetic enamel paint over one coat of pink primerincluding preparation of new or previously untreated wood and wood based surfaces Surfaces of any description, not otherwisedescribed, over 10cm width or girth |
| 61 | E & M Division items |
| 62 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, sockets, lamp holder and conduit etc. removing materials to store fortaking credit and making good disturbed surfaces of walls, floors, etc complete all as specified and directed by EIC.Note:- The damaged surfaces to be made good with plastering& applying colour wash in required coats tomatching with existing surfaces as directed by Engineer-in-charge. Cost of the same deem to be included in quoted rates and nothing extra on this account admissible. |
| 63 | M&L for point wiring with two single core 1.5 Sq.mm size multistranded FRLSH copper conductor PVC insulated cables as main conductorand one single core 1.5 Sq.mm size green colour PVC insulated,multistranded copper conductor PVC cable FRLSH as earth continuity conductor,1100 volts grade, complete drawn in and including PVC Non metatilicconcealed Conduit and conduit accessories,confirming to IS Specifications,concealed in wall, fixing on ceiling /trusses with suitable clamps , screws etc, including 1.22 mm thick MS terminal boxes with 3 mm thick plastic laminated sheet top cover fixed with cadmium plated iron screws for mounting switches, sockets, fan regulators etc.,including connecting up and testing , all as specified and as directed One light point controlled by one switch. |
| 64 | M&L for point wiring with two single core 1.5 Sq.mm size multistranded FRLSH copper conductor PVC insulated cables as main conductorand one single core 1.5 Sq.mm size green colour PVC insulated,multistranded copper conductor PVC cable FRLSH as earth continuity conductor,1100 volts grade, complete drawn in and including PVC Non metatilicconcealed Conduit and conduit accessories,confirming to IS Specifications,concealed in wall, fixing on ceiling /trusses with suitable clamps , screws etc, including 1.22 mm thick MS terminal boxes with 3 mm thick plastic laminated sheet top cover fixed with cadmium plated iron screws for mounting switches, sockets, fan regulators etc.,including connecting up and testing , all as specified and as directed One fan/ exhaust fan point controlled by one switch. |
| 65 | M&L for point wiring with two single core 1.5 Sq.mm size multistranded FRLSH copper conductor PVC insulated cables as main conductorand one single core 1.5 Sq.mm size green colour PVC insulated,multistranded copper conductor PVC cable FRLSH as earth continuity conductor,1100 volts grade, complete drawn in and including PVC Non metatilicconcealed Conduit and conduit accessories,confirming to IS Specifications,concealed in wall, fixing on ceiling /trusses with suitable clamps , screws etc, including 1.22 mm thick MS terminal boxes with 3 mm thick plastic laminated sheet top cover fixed with cadmium plated iron screws for mounting switches, sockets, fan regulators etc.,including connecting up and testing , all as specified and as directed One switch socket out let point 5 Amps on independent board |
| 66 | M&L for point wiring with two single core 1.5 Sq.mm size multistranded FRLSH copper conductor PVC insulated cables as main conductorand one single core 1.5 Sq.mm size green colour PVC insulated,multistranded copper conductor PVC cable FRLSH as earth continuity conductor,1100 volts grade, complete drawn in and including PVC Non metatilicconcealed Conduit and conduit accessories,confirming to IS Specifications,concealed in wall, fixing on ceiling /trusses with suitable clamps , screws etc, including 1.22 mm thick MS terminal boxes with 3 mm thick plastic laminated sheet top cover fixed with cadmium plated iron screws for mounting switches, sockets, fan regulators etc.,including connecting up and testing , all as specified and as directed One switch socket out let point 5 Amps on same board |
| 67 | M&L for point wiring with two single core 4.0 Sq.mm size multistranded FRLSH copper conductor PVC insulated cables and one single core 4.0 Sq.mm size green colour PVC insulated,multistranded copper conductor PVC cable FRLSH as earth continuity conductor,1100 volts grade, complete drawn in and including PVC Non metatilicconcealed Conduit and conduit accessories,confirming to IS Specifications,concealed in wall, fixing on ceiling /trusses with suitable clamps , screws etc, including 1.22 mm thick MS terminal boxes with 3 mm thick plastic laminated sheet top cover fixed with cadmium plated iron screws for mounting switches, sockets, fan regulators etc.,including connecting up and testing , all as specified and as directed for one 3 pin 15 Amp switch socket outlet |
| 68 | Supply and fixing switch piano flush type 5 Amp single pole, one way complete all as specified as directed by EIC. |
| 69 | Supply and fixing socket outlet 5 pin 5 Amps, flush type complete all as specified as directed by EIC. |
| 70 | Supply and fixing Socket outlet combination 2 in 1 3 pin 6 and 16 amp flush type universal complete all as specified as directed by EIC. |
| 71 | Supply and fixing Socket outlet combination 2 in 1 3 pin 6flush type universal complete all as specified as directed by EIC. |
| 72 | Supply and fixing lamp holder insulated body with back plate for batten fitting including necessary connection complete all as specified as directed by EIC. |
| 73 | Supply and fixing for ceiling rose surface bakelite 65 x 50 mm three terminal complete all as specified as directed by EIC. |
| 74 | S&F surface mounting batten tube light fitting, integrated polycarbonate LED channel with white acrylic cover complete suitable for and including lamp LED 1x20 Watt,(4 feet) fixed properly on wall surface and connecting complete from ceilling rose to fitting by three core copper conductor cable of overall sheathed size 2.5 Sqmm which shall be passed through PVC flexible conduit all as directed. |
| 75 | S&Fbuilding security light LED fitting 25/35 watt 230V AC outdoor type with high pressure die cast aluminum housing and heat resistant , epoxy powder coated dark graphite grey colour finish and prismatic polycarbonate cover with individual LED lences suitable for including lamp LED 25/35 watt, fixed / connect properly at directed location on building with IP 65/66 protection complete |
| 76 | Supply and fixing bracket for street light fittings of any size made out of GI pipe medium grade 25/32 mm dia 1.25 mtr length bend to required size and shape including provision of clamps and fittings in position and two coat of aluminum paint over a coat of red oxide primer all as specified and directed including taking down old bracket. |
| 77 | Taking down old fan and S&F for Plastic bodyExhaust Fan 250 mm sweep, single phase 230 volts AC, 900 RPMfour blade with louver shutters complete fixed properly on wall surface with the provisioning of suitable sizes of rag bolts, nuts, washer and to connect by using cable PVC insulated copper stranded conductor of size 1.5 Sqmm 3 core and overall PVC sheathed which shall be passed through PVC flexible conduit of length not exceeding 0.50 mtr all as reqd and as directed by Engr-in-Charge. |
| 78 | Taking down old fan and S&FBLDC Ceiling fan 1200mm sweepsingle phase 230 volts AC, min air delivery 210 CFM with service valve 6.00 BEE 5 star ratingwithblade ,down roads electronic regulator andcomplete accessories complete fixed properly on wall surface with the provisioning of suitable sizes of rag bolts, nuts, washer and to connect by using cable PVC insulated copper stranded conductor of size 2.5 Sqmm 3 core and overall PVC sheathed which shall be passed through PVC flexible conduit of length not exceeding 0.50 mtr all as reqd and as directed by Engr-in-Charge.Note:- Taking down Old Ceiling fan deposit toAGE Vairengte E/M Store |
| 79 | Supply and fixing powder coated sheet metal enclosuresDB, double door, single pole and neutral (SPN) 8 way 240 Volt fitted with bus bar, DIN channel, neutral link and incoming contact complete all as specified and directed. |
| 80 | Supply and fixing MCB SPN 6-32 Amps240 volts. complete all as specified and directed. |
| 81 | Supply and fixing MCB SP 6 Amps to 32 Amps 230 Volt. complete all as specified and directed. |
| 82 | M & L for building earthing complete with galvanised steel earth plate electrode 600mm x 600mm x 6mm burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edged of the plate not less than 1.5 mtr below normal ground level,connected to galavanised iron earth lead by means ofbolt, nut, check nut and washer of galavanised iron wire 4mmas earthing lead as shown in Electrical Plate No 3 of SSR Part I connected to earthing test point all as specified or indicated including testing on completion including necessary excavation and earth work inhard/dence soil, earth pit in PCC 1:3:6 typeC1 using 20mm stone aggreate, funnel, 20mm dia GI medium grade water pipe, 15mm dia GI light grade earth lead protection pipe, CI frame and cover, wire, copper lugs,wire mesh, charcoal or coke and common salt in alterative layer all around the earth electrode compacted thickness 15 cm including excavation and earth work pit cover including disposal of surplus soil to a distance not excessding 50m, complete testing on completion all complete as shown in electrical plate No 3 of SSR Part I 2009 all as directed by Engr-in-Charge |
| 83 | Supply ,laying and testingin trenches or fixing on wall or passing through pipe 1100 volts grade heavy duty cable XLPE Insulated multi stranded aluminium conductor size 16 sqmm 2 core served with an inner sheathing of PVC tape armoured with galvanised steel wire or strip and over PVC sheathed complete as per specification properly clamps on walland connection at end point with all legs ,glands etc incl taking out old rusted cable complete all as specified and directed by Engr-in-Charge |
| 84 | Supply & fixingtubes, 32mm medium grade, galvanised iron water tubes with screwed socket joint together with and including all GI fittings connection on wall or floor with clamps digging etc complete all as specified and directed by Engr-in-Charge |
| 85 | Supply & fixing tubes, 25mm medium grade, galvanised iron water tubes with screwed socket joint together with and includingall GI fittings connection on waal or floor with clamps digging etc acomplete all as specified and directed by Engr-in-Charge |
| 86 | M&L for Fan hook fabricatedwith MS Flat 25X6mm 350mmlong 02 nos bend to shapedrilled with holes and MS nut, boltsandwasher of required as per side with one coatof primer and twocoatof paints as per site complete as per direction by EIC |
| 87 | Excavation in trenches in soft/loose soil not exceeding 1.5 mtrwide and not exceeding 1.5 meter in depth for foundation, pole, cable trench etcnot exceeding 10 Sqm on plan and getting out, excavated earth, forming bottomsurfaces to required level incl taking out old laying pipe lines complete all as specified and directed by Engr-in-Charge. |
| 88 | Returning filling in including spreading leveling watering and well ramming in layers n.exc 25cm thick in soft/loose soil complete all as specified. |
| 89 | Removing excavated material (soil) not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specfied and directed by Engr-in-Charge. |
| 90 | Supply & spreading in trenches dry river sand cushioning to underground cable in trenches including spreading, levelling hand punning down complete all as specified and directed Note:- Depth of sand cushioning will be measured after punning down and levelling the sand properly complete all as specifiedand directed by Engr-in-ChargeNote : Punned thickness of sand shall be measured for payment. |
| 91 | M & L for laying of bricks locally available sub class \"B\" bricks (old size) for cable protection cover laid flat and dry in trenches over the cable perpendicular to the direction of cable complete all as specified and directed by Engr-in-Charge |
| 92 | M&L for PCC (1:4:8), Type D2 using 40 mm graded stoneaggregate as in foundations, sub-base,filling and mass concrete complete all as specified. |
| 93 | Use and waste Formwork to soffits of suspended slabs such as roof slabs, landings and similar work, not exceeding 200mm thick( Horizontal or Sloping ), for rough finished flat surface of concrete all as specified and as directed. |
| 94 | M&L for RCC 1:1.5:3 type A-1 (using 20 mm graded stone aggregates) nominal mix as in slab supported on walls, roofs, landing, bolconies, deck slab and shelves complete all as specified & directed. |
| 95 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed |
| 96 | M & L for brickwork with subclass \"B\" or locally available best qualityold size bricks, straight or curved on plan exc 6 m mean raduis,built in CM (1:4) complete all as specified and directed. |
| 97 | Material and labour for Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) on wall surface and finishing even and fair complete all as specified and directed |
| 98 | Supply and fix 150mm diaPVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors / fixed to walls with suitable clamps on wall or floor on on roof complete all as specified. |
| 99 | Supply and fix 110mm diaPVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors / fixed to walls with suitable clamps on wall or floor on on roof complete all as specified. |
| 100 | Supply and fix 110mm dia PVC (SWR) bend suitable for pipe properly fixed with any leakage complete all as specified. |
| 101 | Supply and fix 110mm bore PVC (SWR) branch piece single (single Y) equal or unequal, properly fixed complete all as specified. |
| 102 | Supply and fix 110mm bore PVC (SWR) junction, single T equal or unequal with or without door access complete all as specified. |
| 103 | Supply, install and commsioning of 2000 Ltr Rotational moulded polyethylene water storage tanks double layer (cylindrical vertical with closed top) hoisted and fixed in position on plateform including connection of pipe from existing or new pipe line complete all as specified and directed by EIC |
| 104 | Supply, install and commsioning of 5000 Ltr Rotational moulded polyethylene water storage tanks double layer (cylindrical vertical with closed top) hoisted and fixed in position on plateform including connection of pipe from existing or new pipe line complete all as specified and directed by EIC |
| 105 | Supply and fix brass ball valves, high pressure suitable for 25 mm bore pipe, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule complete all as specified and directed by EIC |
| 106 | Supply, install and commsioning of Rain water harvesting filter HDPE wall mounted with fasten nut bolts for holding the filter and strips anti rust self cleaning mechanism inlet pipe 110mm bore dia capacity 340LPM clean water outlet 90mm dia-3 RM and drainout pipe 90mm dia -3 RM filter elements SS-304 screen, mesh size 250 microns, efficiency of filter 90% source of power by gravity complete including all pipe pipe fiiting, bends, elbow, Y junction, Tee etc and accessories all including as per site requirement and as specification and directed by Engr-in-Charge.Note:- All inlet, outlet and drain out pipe fitting, clamps etc including in quoted rate. |
| 107 | Supply, install and commsioning of Electric motor 0.5HP single phase 230V 50Hz 1500RPM copper winding Metal steel body complete connection 5Amp swich socket with board from nearest DB provided in this work, MS sheet box 60X60cm three side closed one side door arragement for protection for motor from rain mounted on plantform with nut bolts etc as per direction by Engr-in-Charge |
| 108 | Supplying laying jointing and teting GI tubes 25mm bore light grade with all fittings and fixed to walls or laid in trenches, under road for passing cables or used as pole etc complete complete all as specified and directed. |
| 109 | M & Lfor preparation of new wall plastered surfaces incl cornices and applying three coats of white wash complete all as specified and directed. |
| 110 | Material and labour for light/fan pointwiring with 2x1.5 sqmm size along with 1x1.5 sqmm earth wire of HFFR PVC insulated copper conductor single core cable in concealed stove enamelled steel conduit complete all as specified and as directed for 01 No flame proof light/fan control by one switch |
| 111 | Material and labour for light/fan pointwiring with 2x2.5 sqmm size along with 1x2.5 sqmm earth wire of HFFR PVC insulated copper conductor single core cable in concealed stove enamelled steel conduit complete all as specified and as directed for 01 No flame proof 15 Amp socket point |
| 112 | S&F switch flame proof rotary type with termination box in LM6, 16A single pole 250 V complete all as specified and directed |
| 113 | S&FFlame proof switch socket & plug combined in LM6 cable terminatin box in LM6, 5 A & 16 A, 250 v, 2P + earth complete all as specified and directed |
| 114 | Supply and fixing LED highbay light fitting 1x120 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection toughened glass, with LED tube light fixtures driver holders, connector etc Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size fixed into the wall complete all as specified and directed |
| 115 | Supply and fixing LED light fitting 1x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection toughened glass, with LED tube light fixtures driver holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size on walls complete all as specified and directed |
| 116 | S&F flame proof weather proof DBTPN 415 volt 4 way with bus bar and cast aluminium LM6 enclosure, operated externally spring type knob complete with M-25 cable entry to suit incoming cable and 2 Nos M-20 cable entries for outgoing cables from bottom with cable gland suitable for hazaraduous area certified by CMRS dhanbad for group II A & II B consiting of following complete items :Incoming : (a) MCB TPN 40 Amps -01 NoOutgoing:(a)MCB TP 16 Amps -01 No (For 3 Phase metal plug socket)(b)MCB SP 10-40 Amps -8 Nos |
| 117 | S&F flame proof weather proof DB TPN 415 volt 4 way with bus bar and cast aluminium LM6 enclosure, operated externally spring type knob complete with M-25 cable entry to suit incoming cable and 2 Nos M-20 cable entries for outgoing cables from bottom with cable gland suitable for hazaraduous area certified by CMRS dhanbad for group II A & II B consiting of following complete items all as specified and directedIncoming : (a) MCB TPN 63 Amps -01 NoOutgoing :(a)MCB SP 10-40 Amps -11 Nos |
| 118 | M & L for earthing complete with galvanized steel earth plate electrode 60 x 60 cm x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 mtr deep below GL with top edge of the plate not less than 1.5 mtr below normal GL and connected to earth plate surrounded by 15 cm thick packed layers of charcoal dust and common salt and connected to earth lead GI wire 4mm dia by means of bolts, nuts, check nuts and washers of galvd iron or steel and thimbles and other end of the earth wire connected to DB and protected by galvd iron or steel pipe light grade 15 mm bore and water pipe 20 mm bore GI light grade with funnel and wire mesh, including all necessary excavation and earth and all shown in electrical plate No 5 of MES schedule Part I of 1991 complete all as specified and directed |
| 119 | S&F flame proof wall fan/ air circulator 415mm single phase including with cable gland completewith all accessories complete all as specified and directed |
| 120 | S&F flame proof metal plug socket 32 Amp 5 pin TPN 415 V including with cable gland completewith all accessories complete all as specified and directed |
| 121 | S&F flame proof exhaust fan 300 mm dia complete with bird guard louvers and complete with all accessories complete all as specified and directed. (For Toilet in BP)) |
| 122 | M&L Three phase Sub main wiring with 4 runs of 6 Sqmm single core HFFR PVC insulated but in unsheathed multi stranded copper conductor cable 1100 volts grade drawn through concealed conduit of suitable size stove enamelled Steel conduit medium with conduit accessoriesas per ISI including 6.0 Sqmm PVC insulated copper conductor earth continuity wire complete all as specified and directed (Note :- 4 + 1 run of cable for 1 RM shall be measured as 1 unit. ( For TPN DB to 3 phase Metal plug socket) |
| 123 | M&L single phase Sub main wiring with 2 runs of 2.5 Sqmm single core HFFR PVC insulated but in unsheathed multi stranded copper conductor cable 1100 volts grade drawn through concealed conduit of suitable size stove enamelled Steel conduit medium with conduit accessoriesas per ISI including 2.5 Sqmm PVC insulated copper conductor earth continuity wire complete all as specified and directed(Note :- 2 + 1 run of cable for 1 RM shall be measured as 1 unit. ( For TPN DB to switch boards and power sockets) |
