|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed. |
| 2 | Demolition of cement concrete is reinforced (reinforcement cut as required to facilitate demolition) complete all as specified and directed. |
| 3 | Dismantling of Stone slabs and tiles of any description or thickness in floors, walss, aprons etc laid bedded and pointed in any mortar removing serviceable tiles to store and rubbish off the premises. |
| 4 | M & L for Granite of black / green / imperial red (colour as approved by Accepting Officer) of any type machine cut as in shelves/steps/counter tops, 20 mm thick, set and jointed in cement slurry over & including screedof 15 mm thick / rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab or with suitable adhesive for fixing on unpolished kota stone slabs and including rubbing, cutting and mirror type polishing and bull nose on exposed sides complete all as specified .Note : Single piece should be used in steps/cills/jambs/shelvesor equivalentas approved by accepting officer. |
| 5 | S&F 5cm thick Sand stone slabs in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, etc. n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4 complete all as specified and directed. |
| 6 | M&L for Vitrified Ceramic tiles in light shade 10 mm thick (square/ rectangular) polished, area of each tilesexceeding 0.36 sqm but not exceeding 0.42 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchin floors etc. over & including 15 mm thick screed in cement mortar (1:6) over and pointed in white cement with pigment to match the colour of tiles complete all as specified. |
| 7 | . --Ditto-- all as per item No 06 above but as in skirting over & including 10mm thick backing coat of CM 1:4 all as specified. |
| 8 | M & L for Non-skid ceramic quality coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 15 mm thick screed in cement mortar (1:6) over and pointed in white cement with pigment to match the colour of tiles complete all as specified. |
| 9 | M&L for Glazed ceramic glossy finish tiles coloured in vertical surface 450X350X7mmin any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified. |
| 10 | M&L for jodhpur stone roof slabs, self faced 7.5cm to 10cm thick, 25cm to 35cm wide, hoisted, set, jointed and grouted in CM 1:3as directed by the Engineer-in-Charge. |
| 11 | S&F for Rolled sections as ISMB 300 in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates of Fe 410W(GradeE- 250) quality A. |
| 12 | M&Lfor machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including screed bed or bedding layer of 15 mm thick in CM (1:6) all as specified and directed by Engineer-in-charge. |
| 13 | M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate for levelling course for consolidated thickness 40 mm all as per the requirements & all as directed by Engr-in-Charge. |
| 14 | M&L for 10mm thick screed plaster on roof for laying in CM 1:4 waterproofing treatment, with using WPC (WPC will be measured and paid separately as supply only) |
| 15 | Supply only integral Waterproofing compound. |
| 16 | M&L for APP based polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with polyester non wove fabric (wt not less than 150 gms/sqm) laid over primed surface including bituminous primer conforming to IS-3384 applied @ 0.3 Ltr/Sqm by forcedall as specified and as directed , Four course roof treatment consist of as under :-(i)Applying one coat of bituminous primer conforming to IS-3384 @0.3 Ltr per sqm (ii)Laying of APP based membrane as specified thickness and weight (iii)Applying one coat bitumen grade 85/25 @ 1.2 Kg/Sqm Complete all as specified and directed. |
| 17 | Taking down cement plaster on stone walls including raking out joints, hacking for key, scrubbing down with water all as specified |
| 18 | M & L forrendering 10mm thick ready mix plaster on internal wall by adding potable water by weight of material as mentioned by manufacture ready mix plaster shall comply with IS- 1661-1972, IS-2402-1963, IS-2250-1981 and shall confirm 28 compressive days cstrength 10-15 MPA bulk dencity 1600-1800 kg/cum and pull out bond strength-> 0.5 MPA omplete all as specified and directed. |
| 19 | M & L for Cement plastering 15mm( thick in two layers -first layer 10mm thick with ready mix plaster and outer layer 5mm thick ready mix water proof plaster) on outer walls by adding potable water by weight of material as mentioned by manufacture ready mix plaster shall comply with IS- 1661-1972, IS-2402-1963, IS- 2250-1981 and shall confirm 28 days compressive strength 10-15 MPA, bulk density 1600-1800 kg/cum and pull out bond strength->0.5 MPA complete all as specified and directed |
| 20 | M & L forrendering 5 mm thick ready mix self curingplaster on ceilling by adding potable water by weight of material as mentioned by manufacture ready mix plaster shall comply with IS- 1661-1972, IS-2402-1963, IS-2250-1981 and shall confirm 28 compressive days cstrength 10-15 MPA bulk dencity 1600-1800 kg/cum and pull out bond strength-> 0.5 MPA omplete all as specified and directed. |
| 21 | M&L for preparation of newly plastered surfaces of walls and applying two coats of oil emulsion distemper over onecoat of 3mm thick wall careputty including one coat of primerall as specified & directed by Engineer-in- Charge. |
| 22 | M&L for preparation of newly plastered surfaces of ceiling and applying two coat of acrylic distemperDistempering with 1st qualityhaving VOC content less than 50 gms/ itre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification. Two or more coats on new work. all as specified & directed by Engineer-in- Charge. |
| 23 | Preparation new surfaces of walls (external faces) of walls and applying two coats of external weather proof paint of Apex or equivalent over a coat of primer (self coat) complete all as per manufacturers instructions, complete all as per specified and directed. |
| 24 | M&L for preparing old plastered or unplastered surfaces of walls and applying one coat of white wash complete all as specified & directed by Engineer-in-charge. |
| 25 | M&L preparation of old plastered or unplastered surfaces of wallsand applying one coat of cement base paint complete all as specified and directed by Engineer-in-Charge. |
| 26 | M&L for preparing old plastered or unplastered distempered surfaces of walland applying one coat of distemper oil emulsion complete all as specified & directed by Engineer-in-charge. |
| 27 | Providing and placing in position microconcrete which shall be cement based prepacked single component, chloride free, non-shrink, free flow, self compacting, ready to use after mixing water in specified proportion obtained from approved manufacturer of thermoex chemical as per speciification and direcation of engineer-in-charge (payment under this item shall be made only after wet curing bas been done and surface has been satisfactory evaluated by sounding/tapping with blunt metal instrument). |
| 28 | Taking down door/windows/ventilators chowket or frame incl shutter area n exc 1.50 sqm |
| 29 | Taking down chowkhats or frames door/windows/ventilators (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holesand making good reqd shape for hold fast block for new frame complete all as specified. |
| 30 | Dismantling structural steel work including doors, gates but excluding framed truss etc. |
| 31 | S&F Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanksand similar work conforming to Fe Fe 290 Gde E-165 |
| 32 | M&L for powder coated aluminium frame for doors, windows, ventilators (thickness of powder coating not less than 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. |
| 33 | S & F solid PVC door frames of size 50x47mm made out of 5mm plain colour PVC sheet supplying and fixing in opening as per specification and drawing shown in SSRcomplete all as specified and as directed. As approved by Engr-In-Charge |
| 34 | S & FFactory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined to either with solvent cement, suppling & fixing in the frame at site as per specification incl the fwg S & F As approved by Engr-In-Charge(a) Stainless Steel (304 Grade) Finished Butt Hinges 125mm -3 Nos per leaf(b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf(c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf |
| 35 | S & F Factory made ISI markedWPC flush door shutters 35mm thick, BWP conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 2nd class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters complete all as specified and including supply and fixing following items As approved by Engr-In-Charge :(a) Stainless Steel (304 Grade) Finished Butt HinAGEs 125mm -3 Nos per leaf(b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf(c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf(d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16 x 300mm- 1 No per leaf(e) Stainless Steel (304 Grade) Finished Floor Door Stooper- 1 No per leaf |
| 36 | Providing and fixing powder coated 50 microns extruded aluminium in 3 Tier Track Sliding Windows/glazing, with frame of section 100x44-45x1.30mm, track of size 100x38.10x1.30 & shutters made of size 32x18x1.3mm, with and including 4mm thick tinted sheet glass selected quality fixed in 2 shutters and stainless steel wire gauge 0.36mm nominal dia of wire and average width of aperture 1.40mm in one shutter and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size and also including powder coated 150mm handle with built in locking system for each leaf complete all as specified. |
| 37 | Powder coated 50 microns extruded aluminium glazing/ doors & shutters made out of section 63.5x38.10x1.29mm for chowkats or frame & shutters made of size 44.45x44.45x1.29mm for side rails and middle rail, 114.3X44.45X1.29mm for top rails and bottom rails and including 12mm thick High Density Fibre Board pre-laminated on both sides (water proof) below middle/lock rail and 5mm thick tinted glass above middle/lock rail and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beads 20mm size with and incl mortice lock with duplicate keys etc complete all as specified and directed approved by Enge-in-Charge including supply and fixing the following items:(a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm -3 nos per leaf.(b) Powder Coated Aluminium Tower Bolt 200mm long - 2 nos per leaf(c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf |
| 38 | S & F toughned glass 10mm thick as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes with all accessories like handle, stopper with glazing with beads fixed with metal panel pins (beads to be measured separately as \"supplied only\") as required including hacking out out glass |
| 39 | S & F in repair Double action floor spring ISI marked hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repairs complete all as specified. |
| 40 | S & F Door closer hydraulically regulated designation No 3 universal type suitable for door shutter 851mm to 1000mm vide and weight between 61 to 80 kg of aluminium (extruded section body) as in repairs all as specified and directed. |
| 41 | M&L for preparation of new surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide complete. |
| 42 | Supply & fixing in repairs Stainlesssteel tubing of 25 mm dia chromium plated min. 1.0 mm wall thickness as in curtain rod complete incl S&F 02 Nos stainless steel brackets/finials fency type, stops fixed with ss screws etc all as specified & directed.Note : For the purpose of mesurement and payment running length of curtain rod only shall be considered as approved by Engr-In-Charge. |
| 43 | Demolition of cement concreteunreinforced in groundfloors andpavingsnot exc 15cm thickness below or above ground level etc all as specified and as directed by Engineer-in-Charge. |
| 44 | M&Lfor75mmthickPCC1:3:6typeC-2asinplinthprotection and surface finished even and smooth w/o using extra cement as specified & directed by Engineer-in-Charge. |
| 45 | Dismantling wall and ceiling boarding of any description, thickness including cover fillets complete al as specified and directed. |
| 46 | M&L for providing 10 mm PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawing |
| 47 | S&F for Anodised aluminium snap grid frame work for false ceiling and all Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete . |
| 48 | Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing |
| 49 | S&F 150 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor |
| 50 | S & F in repair Bib taps,CP,fency type long nose with wall flanage screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete fixed as in repair in all respect all as specified. |
| 51 | S&F tubular/towel rail 20 mm dia brass chromium plated \"D\" type60 cm long between flange brass CP fixed with and incl chromium plated brass screws and wooden plastic cleats all as specified and directed including taking down old one. |
| 52 | M&L for Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) |
| 53 | M&L for Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed. |
| 54 | S & F in repair Vitreous china premium/1st quality urinal bowl type of white colour, of size 330x300x450mm incl providing and fixing plugs/brackets, bedding urinal against wall in CM 1:2, securing urinals to plugs with and incl S&F of all accessories for fixing as recommended by manufacturer like 60mm long brass secrews/fasteners/rag bolts etc, pointing urinal back in white cement; connecting for disCharge pipe incl necessary packing, union complete all as specified. |
| 55 | S&F in repair Urinal spreader of PTMT any colour for fixing with 15mm diapipe. (Minimum weight 60gms). |
| 56 | S & F in repair Vitreous china premium/1st quality wash basin (under counter), white, size 550x400 mm including S&F all accessories as recommended by manufacturer complete fixed in position in all respect as per manufacturer\"s instructions and all as specified including all Waste fittings, brass,chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed Complete all as specified and directed. Note : The items for counter will be measured and paid separately. |
| 57 | S&F looking mirror of 600mmx450mm size with selected quality glass mounted on 6mm commercial ply or AC building board with aluminium frame around and fixed to wooden plugs with CP brass screws, complete all as specified and directed. |
| 58 | S&Fin repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf, 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed including taking out old one. |
| 59 | S&F in repairs Soap disc cera cat no F5013116ch or equivalent CP fixed in position complete fixed as in repair in all respect all as specified. |
| 60 | S & F brass chromium plated Health faucet with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. Cera cat part no F8030104 or equivalent |
| 61 | Supply & Fixing in repair chromium plated shower rose 125mm rectangular shape fancy type fixed to 15mm bore pipeall as specified and directed by Engr-in-Charge. as approved by Engr-In-Charge |
| 62 | S&F in repairangular stop cock fancy type, chromium plated with long shank and cup (concealed type) 15 mm dia, cast copper alloy, screwed down, high pressure with crutch or butterfly handles, screwed both end for iron pipe or for unions complete all as specified and directed including taking down old one. |
| 63 | S&F 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends in PPR pipe line and fixed including taking down old one. |
| 64 | S & F in repair Vitreous china premium/1st quality wash down water closet wall hung EWC (One piece) P trap white/ivory/off white including connection to drain (or out going pipe) and to flushing pipe, antisyphonaAGEe pipe,etc.,with flush pipe PVC 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gasket etc as recommended by manufacturer for fixing, incl 100mm dia cast iron sanitary connections—short connections pipe of length upto 600 mmand Cutting holes in or through walls, packing with PCC 1 : 2 :4 complete and taking down existing of any description/size complete in all respect all as specified.Make : Cera cat part no A1044110 / Parryware/Hindware or equivalentas approved by Engr-In-Charge |
| 65 | Supply and fixingPVC Flexible waste pipe 32/40 mm dia having length 900mm with socket for steel sink/WHB upto floor level complete all as specified and directed. |
| 66 | S & F for Rotational moulded polyethylene triple layer white colour water storage tanks of 500 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arranagements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete . |
| 67 | S & F for 6mm thick and area exc 1.5 sqm and n.exc 2sqm Gym mirror fixed to wall with stainless steel plugs/connecter/ spacers/screws etc. chrome finish without any beading, including ends/edges of the mirror to be tapered etched smooth finish etc.complete fixed in position all as specified and directed as approved by Engr-In-Charge. |
| 68 | S & F for Rotational moulded polyethylene triple layer white colour water storage tanks of 1000 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete . |
| 69 | S&F in repairs 500 Liters Water Tank Insulation Cover Water Tank Cover Roof Top Thermal Water Tank Jacket | 3 Layer Cover to Protect from Hot and Cold Weather complete all as specified and directed by Enginer in charge as approved by accepting officer. |
| 70 | S&F in repairs 1000 Liters Water Tank Insulation Cover Water Tank Cover Roof Top Thermal Water Tank Jacket | 3 Layer Cover to Protect from Hot and Cold Weather complete all as specified and directed by Enginer in charge as approved by accepting officer. |
| 71 | Supply and fixing in repair of fancy typepillar taps cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shank supply and fixing ly nuts for iron pipe of 15mm bore fancy type. |
| 72 | S & F in repair Stainless steel grating 150x150 mm size square / rounded as per required shaped with cockroach trap for floor trap fixed in position complete all as specified . |
| 73 | S & F PVC mirror cabinet of size 300x450mm of selected quality glass fixed in PVC cabinet all as specified and directed.prayag cat part no MC10001or equivalent. |
| 74 | Supplying and laying in repair of CPVC pipes 16mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified including taking down or up existing GI tubing & connections all as specified and directed by Engr-in-Charge. |
| 75 | Supplying and laying in repair of CPVC pipes 20mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified including taking down or up existing GI tubing & connections all as specified and directed by Engr-in-Charge. |
| 76 | S&F PVC (SWR) bends 110 mm dia any radiusall as specified and directed |
| 77 | S&F in repairs 110mm dia PVC (SWR) pipes single socketed in any length with rubber joints fixed to walls or laid in floorsetc complete. |
| 78 | S&F PVC (SWR) Vent cowl ,110 mm dia |
| 79 | M & L for Jaisalmer stone for wall cladding(of any type) 35-55 mmthick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of stone , exc .0.06 sqm but not exc 0.11 sqm ,including cutting and polishing types in wall including 20 mm thick CM 1:4 for laying Jaisalmer stone complete all as specified and direction by the Engineer-in-Charge. |
| 80 | Material & Labour for 40 mm thick jaisalmer stone a jall feature intricate carving and warm golden hue for window such as balconies a etcin frame set in cement mortar 1:4. complete all as specified |
| 81 | M&L for demolition for precast concrete articles any type |
| 82 | M&L Lime or sand stone Quoins, jamb stones, plain steps, parallel copings with throated edges, etc |
| 83 | Dismantling mild steel work of any description not otherwiseas specified and directed. |
| 84 | S &F framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Door etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and decorative cast iron artical etc. |
| 85 | Dismantling of Trellis work (Jafri), including taking as under of battens in trellis (posts and rails measured separately) |
| 86 | Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc complete all as specified. |
| 87 | M&L for squared rubble walling, Jodhpur type brought up to courses, well bonded, bedded and solidlyhearted, built in cement mortar (1:6) all as specified& directed. |
| 88 | M&L for squared rubble walling, Jodhpur type brought up to courses, well bonded, bedded and solidlyhearted, built in cement mortar (1:6) all as specified& directed.but except stone |
| 89 | Extra over stone walling for hammer dressing to face stones with maximum depression on face from a straight edge not exceeding 20mm & dressing face beds and joints as specified to squared rubble walling Jodhpur type brought up to courses all as specified & directed by Engineer-in-Charge. |
| 90 | Material & Labour for 40 mm thickjodhpur jaisalmer stone a jall in frame set in cement mortar 1:4. complete all as specified |
| 91 | M&L for preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistance primer complete all as specified. |
| 92 | M & L for Providing precast cement concrete type B-1 (1:2:4) with 20mm garded stone aggregate in copings.apex stones,columns, posts, boundary pillars, frame of jallies etc and setting in mortar 1:4 complete with joints to match |
| 93 | E&M ItemsTaking down carefully aluminium point wiring any type ,surface/concealed/ PVC capping or tubing (including light,fan,s/socket, or power)complet fittings such as switches,ceiling rose,pendents,regulators,sockets etc complet |
| 94 | Taking down and refixing ceiling fan/cabin fan/ air circulating fan with cleaning & painting of ceiling fan complete with two coat of synthetic enamel paint of white colour by spraying including filling cavities with filler complete all as directed by E- in- charge after minor repairs |
| 95 | Taking down and refixing exhaust fan with cleaning & painting of exhaust fan complete with synthetic two coat of enamel paint of black colourby spraying including filling cavities with filler complete all as directed by E- in- charge after minor repairs |
| 96 | M & L for point wiring with two single core 1.5 Sqmm cabel (nominal area) stranded copper conductor, PVC insulated unsheathed FRLSH cable, 1100 V grade, conforming IS:694 & colour code in conduit system of wiring, drawn in and including concealed rigid PVC Conduit not less than 20 mm dia with galvanised modular metal flush box, thickness as per OEM suitable of suitabe size and modular white cover plate with frame of suitale module and wiring to be terminated in pressed steel sunken boxes including all accessories fixed with chromium plated screws and washers and using single core 1.5 Sqmm (nominal area) stranded copper conductor, PVC insulated unheated FRLSH cable as in earth wire (green colour) connecteedd to common earth only complete all as specified and directed for following:- (a)One light, C/Fan, E/Fan, bell point controlled by one switch. |
| 97 | All as per item no. 96 above here in before but with copper conductor cable of size 1.5 Sqmm for one 3 pin socket outlet, 5 amp on same board. |
| 98 | All as per item no. 96 above here in before but with copper conductor cabe of size 2.5 Sqmm for one 3 pin socket outlet, 5 amp on independent board. |
| 99 | All as per item no. 96 above here in before but with copper conductor cabe of size 4 Sqmm for one 3 pin socket outlet, 16 amp on independent board. |
| 100 | S & F for Modular switch, flush button, 1 way, 6A, 1 module, complete as specified and directed by Engineer- in- charge. |
| 101 | M & L For modular socket outlet 2/3pin, 2 module, 6Amps, 230 Volts AC, complete all as specified and directed by Engineer-in-charge. |
| 102 | M & L For modular socket outlet 2 in 1, 6 pin, 2 module, 6/16Amps, 230 Volts AC, complete all as specified and directed by Engineer-in-charge. |
| 103 | S & F for Modular switch, flush button, 1 way, 16A, 1 module, complete as specified and directed by Engineer- in- charge. |
| 104 | S & F Ceiling rose surface backlite 65x50mm 3 terminals complete. |
| 105 | S & F Modular Fan step regulator, 120 W-2 module complete all as specified and directed. |
| 106 | M&L Modular white cover plate with frame ( both inner & outer plate cover) 3 module |
| 107 | M&L Modular white cover plate with frame ( both inner & outer plate cover) 4 module |
| 108 | M&L Modular white cover plate with frame ( both inner & outer plate cover) 6 module |
| 109 | M&L Modular white cover plate with frame ( both inner & outer plate cover) 8 module |
| 110 | Supply and fix in repair LED tube light fittingcapacity 20 watt fixed on wall/surface / ceiling with all accessories tube,driver,with surge protector completerewiredwith multistranded copper cable & connecting to ceiling rose with3 core ,multistrandedflexible copper cable. |
| 111 | Supply and fix in repair LED tube light fitting(mirror type)capacity 10 watt fixed on wall/surface / ceiling with all accessories tube,driver,with surge protector completerewiredwith multistranded copper cable & connecting to ceiling rose with3 core ,multistrandedflexible copper cable. |
| 112 | S & F in repair 36 WattRecessed LED light fitting suitable for 600X600 MM ceiling incluiding extra frame for fixing at POP/ Gysum Ceilingincluding LED light complete.The 36W system shall be operating at 220-240v AC supply having internal driver. Individual LED\"s should not be visible for glare free output,and connection up to light fitting with connecting up with copper 3 core flexible cord of minimum 0.5 Sqmm size and testing complete, including taking down old unserviceable fittingall as specified and as directed. |
| 113 | S& Fin repair Recess mounting 18 Watt LED Luminaries Aessthetically designed 1 x 18 Watt LED fitting with Size 300X300MM ceiling incluiding extra frame for fixing at POP/ Gysum Ceiling mounted version including LED light complete. |
| 114 | M&L in repair lamp holder insulated body with back plate suitable for battern fittings |
| 115 | Supply and fix in repair LED Lamp Retro fit type 9 watts 230 V and all as specified by Engr-in-charge |
| 116 | Taking down and Refixing of LT UG cable any size any capacity upto 70sqmmfixed on wall/trench with clamps & saddle properly and or excacation returning fiiling in trench as per directed by E-in-charge. |
| 117 | S & Lay in repair sub main wiring with 4runs of 10 sqmm PVC insulated , PVC sheathed , 1100 volt grade as per IS 694, with multistranded copper conductor in and including supply and fixing PVC conduitconcealed/surface withalljoint , elbow, Tee ,Junction and Bend with necessary ches cutting and filling with cement mortor etc, and provision of one run of PVC insulated , multistranded copper conductor cable of size 2runs of 4 sqmm for earth continuty complete all as directed by Engr-in-Charge. |
| 118 | S&F in repair Sheet modular enclosure DB TPN 415 volts 4 way double door type with 200 Amps busbar for fixing of MCBs |
| 119 | S&F in repair MCB Tripple pole and neutral , 63 A, \"C curve\" 415 Volts AC all as specifed and directed |
| 120 | Supply, fix,in reapir connecting and testing factory made, MCB distribution board (MCB DB), IP 38, SPN, 8 way, 415 Volts, flush type made out of 1.2mm thick CRCA sheet metal, Phosphatised, duly powder coated and conforming to IS 13032 with 200 Amps rated bus bar, neutral link, earth bar and din rail etc. complete fixed in switch board/ wallcomplete all as specified and directed. Note: MCBs shall be measured and paid separately. |
| 121 | S&F connecting and testing MCB Single pole (MCB SP) 6-32 Amps , 240 Volts of rupturing capacity 10 KA, C Curve type complete all as specified and directed. |
| 122 | S&F MCB SPN 40 A rating 240 V, 10KA, C series fixing in DB\"s including connecting with bottle type copper thimble complete all as specified and directed by Engr-in-Charge |
| 123 | S & F 15 Watt LED Bldg security light with a nominal system .The luminaire housing should be made of pressure die cast aluminimum.The total power consumption should not exceed15W (including driver) pre wired fitted on and including two Nos PVC block of suitable l size and connection up to tube light fitting with connecting up with copper 3 core flexible cord of minimum size 0.5 Sqmm size and testing complete including LED lamp, including taking down old unserviceable fitting any type complete all asspecified and as directed. |
| 124 | Earthing with galvanised iron earth plate electrode 600 x 600 mm & 6 mm thick burried directly in ground (earth pit not less than 2.25 metre deep below normal GL) with top of earth plate not less than 1.5 metre below GL connected to GI earth lead wire 4 mm dia connected to earth plate electrode by means of GI nuts, bolts & washers earth wire protected with & including 15 mm dia medium grade ISI marked GI pipe not less than 7.5 metre long all as shown in electrical plate No. 3 MES Schedule Part 1, with & including ; PCC 1:3:6 B1 reinforced with welded steel wire fabric not less than 4 Kg per Sq M, watering arrangements with 20 mm GI medium grade pipe ISI marked , GI funnel with GI mesh, filling with mixture of common salt & charcoal, necessary excavation and earth works in any type of soil, including test point, testing & commissioning, complete. (Note :- GI earth wire with GI pipe protection beyond 7.5 metre measured & paid separatelyand it includes taking down old existing earthing.) |
