|
| 1 | B & R Division Items |
| 2 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified & directed. |
| 3 | Demolition of cement concrete (reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified & directed. |
| 4 | Demolition of brick/stone masonry, built in cement mortar including all quoins, arches, pillars etc but exluding ashlars facings, dressed stone work and pre-cast concrete articles all as directed. |
| 5 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises |
| 6 | Dismantlig timber scantling in any position unframed work 40sqcm and over in section complete all as specified & directed. |
| 7 | Dismantlig timber scantling in any position unframed work 40sqcm and over in section complete all as specified & directed. |
| 8 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness as in roof coverings, chajja, wall clading and the like complete all as specified and directed |
| 9 | Dismantling of boarding any description fixed in position with screws complete all as specified and directed by Engr-in-Charge. |
| 10 | Dismantling of wall and ceiling boards (fibre, pulp, insulation boards etc) any thickness including cover fillets. |
| 11 | Taking down cement plaster on brick or stone walls etc, including raking out joints, hacking for key scrubing down with water etc complete all as specified and as directed. |
| 12 | Taking down chowkats or frames with Shutters (without taking off shutters from the frame) not exc. 1.5 sq. m each complete all as specified & directed. |
| 13 | Taking down chowkats or frames with Shutters (without taking off shutters from the frame) exc. 1.5 sq. m but not exc. 4 sq. m each complete all as specified & directed. |
| 14 | Material and labour for 75mm thick PCC (1:3:6) type C2 using 40 mm graded aggregate as Plinth protection / Path finished the surface even & smooth without using extra cement all as specified and directed. |
| 15 | M& L for forming Construction joint 30mm deep x 10mm wide filled with sealing compound grade \"A\" complete all as specified and directed. |
| 16 | M & L for brickwork with subclass \"B\" or locally available best qualityold size bricks, straight or curved on plan exc 6 m mean raduis,built in CM (1:4} as half brick thick wall complete all as specified & directed. |
| 17 | Material and labour for Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) on wall surface and finishing even and fair complete all as specified and directed |
| 18 | Material and labour for Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) on wall surface with top 5 mm layer mixed with water proofing compound and finishing even and fare complete all as specified and directed.NOTE : Water proofing compound shall be measured & paid separately. |
| 19 | Supply only integral water proofing compound complete all as specified and directed. |
| 20 | M& L for Vetrified Ceramic tiles light shade8 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including 15 mm thick screed bed or bedding layers in cement mortar 1:6 over brushing with neat cement slurry as specified |
| 21 | M&L for Glazed ceramic Colouredtiles in vertical surface 300x450x 7 mm thick joint free set as in skirting / dado with set and jointed in neat cement slurry and pointed in white or colour cement to match over & including10mm thick screed bed or backing coat in cement mortar 1:4layingof skirting/dado on walls all as specified and directed. |
| 22 | Supply & Fix Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, railings, and similar work conforming to Fe.290.Gde-E-165 complete all as specified & directed. |
| 23 | Supply and fix Steel work in trusses, purlins, posts and the like using tubular/ square hollow sections including special shaped washer etc. complete using ERW or induction butt welded tubes/SHS conforming to IS.1161 - 2014 / IS.4923 - 1997 grade St.-240 complete all as specified and directed |
| 24 | S&F Rolled Mild Steel Fe 410 -W (Gde- E- 250) quality- A in Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified & directed. |
| 25 | S&F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roofcovering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. |
| 26 | S&F for Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roofcovering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. |
| 27 | S&F factory made 35mm thick plain framed 2nd cl hardwood panelled shutter (two panels ) with lock rail & panel of 9mm BWP commercial ply or 12mm veneered particle with commercial veneering on both face, the size of rail and style as per IS 1003 (Part-1) kiln seasoned and chemically pressed, treated complete incl 15 to 20 mm tapering bedding on one face of second cl hardwood fitted to chowkhats complete all as specified. |
| 28 | S&F factory made2nd class 35 mm thick hardwood glazed and skelton shuttersopen rebated and prepared to receive glass / gauze etc ( with or without sash bars)divided into square with plain, chamfered or rounded fixed with cut : mitered beads for receiving gauge etcsize of members of shutters as specified in SSR Part-I section 8 cluse 8.24(a) complete all as specified. |
| 29 | Supply and fix 9 mm thick veneered decorative ply wood grade-I with BWR resin decorative veneers on one face complete all as specified and as directed . |
| 30 | Supply and fix 3 ways sliding anodized aluminium glazed window shutter with frame with the following specification all as specified & directed.(a) Window frame 3 track of size 95mm x 25mm x 1.5mm thick(b) Stiles and rails of size 35mm x 25mm x 1.5mm(c) 35mm x 35 x 1.5mm T section mullion (d) PVC gasket with 4mm thick tinted glass, incl. aluminium handles with necessary locking arrangement for 02 Nos glazed shutter(e) Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples incl. aluminium handles with necessary locking arrangement for 01 No gauzed shutterNote : Measurement to be taken as overall width and height of window. No shutter or frame to be measured separately. All necessary accessories including tinted glass and stainless steel wire cloth required for assembling and fixing window at proper place complete are deemed to be inclusive. |
| 31 | Material and Labour for Plain cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate as in bed block or hold fast block etc complete all as specified and directed. |
| 32 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of apertue 1.40mm and fixed with stainless steel wire staples complete all as specified. |
| 33 | S&F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified & directed. |
| 34 | Supply and fix 100 mm size stainless steel butt hinges (ISI marked) with stainless steel screws all as specified and directed. |
| 35 | Supply and fix for 150mm extruded Aluminium alloy handles, cast type all as specified & directed. |
| 36 | Supply and fix for 200mm long Aluminium, anodised, barrel tower bolts of extruded section all as specified & directed. |
| 37 | S&F in repairs floor door stopper of aluminium alloy body and tongue,anodised,with hard drawn steel spring of 140 mm size with vulcanised rubber piece. complete all as specified and as directed by Engineer-in-Charge |
| 38 | S/F mild steel,chromium plated curtain rods with brackets, including fixing stops,rollers bracket etc with harrison rails |
| 39 | S & F in repairsfor 4mm dia GI wire fixed to both ends of wall by means of necessary fastening bolts or T-shape nut & bolt for hold the wire complete all as specified & directed. |
| 40 | Providing & fixing false ceiling with fully perforated 12 mm thick micro tegular edged of 10 mm thick square edgeat all heights with GRG (glass fiber reinforced Gypsum ) false ceiling tiles of size 595X595 of approved texture design and patter having moisture contain less than 2%, humidity resistance of 99%,NCR 0.50 to 0.75 as per IS 8225, 1987, non combustible as per BS 475 ( Part -IV1970 and lightreflectance of 85 % minimum to laid in true horizontal level suspended on interlocking metal T grid of hot dipped galvanized iron section of 0.33 mm thick ( galvanized @ 120 gms per sqmincluding both side comprising of main T runner of size 15X 32 mm of length of 3000 mm , cross T of size 15 X 32 mm of length 1200 mm and secondary intermediate crass T of size 15 X 32 of length of 600 mm to form grid module of size 600 X 600 mm suspended from ceiling using galvanized metal sheet item (galvanized @ 80 per sqm ie 50 mm long 8 mm outer dia meter M-6 , fasteners , 6 mm dia fully threaded hanger rod up to 1000 mm length and L shape level adjusters of size 85 X 25 galvanizediron perimeter wall angle of size 24 X24 X 0.40 mm of length 3000 mm to be fixed on perimeter of wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40 mm long dry wall wood screw .The work shall be carried out as per specification drg and as per direction of Engr-in-Charge. |
| 41 | Providing & fixing false ceiling with semi perforated 12 mm thick micro tegular edged of 10 mm thick square edgeat all heights with GRG (glass fiber reinforced Gypsum ) false ceiling tiles of size 595X595 of approved texture design and patter having moisture contain less than 2%, humidity resistance of 99%,NCR 0.50 to 0.75 as per IS 8225, 1987, non combustible as per BS 475Part -IV1970 and light reflectance of 85 % minimum to laid in true horizontal level suspended on interlocking metal T grid of hot dipped galvanized iron section of 0.33 mm thick ( galvanized @ 120 gms per sqmincluding both side comprising of main T runner of size 15X 32 mm of length of 3000 mm , cross T of size 15 X 32 mm of length 1200 mm and secondary intermediate crass T of size 15 X 32 of length of 600 mm to form grid module of size 600 X 600 mm suspended from ceiling using galvanized metal sheet item (galvanized @ 80 per sqm ie 50 mm long 8 mm outer dia meter M-6 , fasteners , 6 mm dia fully threaded hanger rod up to 1000 mm length and L shape level adjusters of size 85 X 25 galvanizediron perimeter wall angle of size 24 X24 X 0.40 mm of length 3000 mm to be fixed on perimeter of wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40 mm long dry wall wood screw . The work shall be carried out as per specification drg and as per direction of Engr-in-Charge. |
| 42 | Complete removal of existing treatment on walls including washing rubbing down & stopping ofcement base, distempered and other painted surfaces complete all as specified and directed |
| 43 | Material and Labour for applying 1mm thick wall care putty on new or previously untreated plastered surfaces of walls, including preparation, to make the surface even and smooth all as specified and directed. |
| 44 | Material and Labour for applying two coats of acrylic distemper over a coat of alkali resistant primer including preparation of newly / old plastered surfaces, all as specified and directed. |
| 45 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over newly / oldsurfaces complete all as specified & directed. |
| 46 | Material and labour for preparation of new steel or iron surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed. |
| 47 | Material and Labour for preperation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed |
| 48 | M & L for applying two coats of synthetic enamel paint over one coat of pink primerincluding preparation of new or previously untreated wood and wood based surfaces Surfaces of any description, not otherwisedescribed, over 10cm width or girth |
| 49 | Material and Labour for preperation of old painted wooden surfaces of any description exc 10cm width or girth and applying one coat of synthetic enamel paint. |
| 50 | E & M Division items |
| 51 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, sockets, lamp holder and conduit etc. removing materials to store fortaking credit and making good disturbed surfaces of walls, floors, etc complete all as specified and directed by EIC.Note:- The damaged surfaces to be made good with plastering& applying colour wash in required coats tomatching with existing surfaces as directed by Engineer-in-charge. Cost of the same deem to be included in quoted rates and nothing extra on this account admissible. |
| 52 | M&L for point wiring with two single core 1.5 Sq.mm size multistranded FRLSH copper conductor PVC insulated cables as main conductorand one single core 1.5 Sq.mm size green colour PVC insulated,multistranded copper conductor PVC cable FRLSH as earth continuity conductor,1100 volts grade, complete drawn in and including PVC Non metatilicconcealed Conduit and conduit accessories,confirming to IS Specifications,concealed in wall, fixing on ceiling /trusses with suitable clamps , screws etc, including 1.22 mm thick MS terminal boxes with 3 mm thick plastic laminated sheet top cover fixed with cadmium plated iron screws for mounting switches, sockets, fan regulators etc.,including connecting up and testing , all as specified and as directed One light point controlled by one switch. |
| 53 | M&L for point wiring with two single core 1.5 Sq.mm size multistranded FRLSH copper conductor PVC insulated cables as main conductorand one single core 1.5 Sq.mm size green colour PVC insulated,multistranded copper conductor PVC cable FRLSH as earth continuity conductor,1100 volts grade, complete drawn in and including PVC Non metatilicconcealed Conduit and conduit accessories,confirming to IS Specifications,concealed in wall, fixing on ceiling /trusses with suitable clamps , screws etc, including 1.22 mm thick MS terminal boxes with 3 mm thick plastic laminated sheet top cover fixed with cadmium plated iron screws for mounting switches, sockets, fan regulators etc.,including connecting up and testing , all as specified and as directed One fan/ exhaust fan point controlled by one switch. |
| 54 | M&L for point wiring with two single core 1.5 Sq.mm size multistranded FRLSH copper conductor PVC insulated cables as main conductorand one single core 1.5 Sq.mm size green colour PVC insulated,multistranded copper conductor PVC cable FRLSH as earth continuity conductor,1100 volts grade, complete drawn in and including PVC Non metatilicconcealed Conduit and conduit accessories,confirming to IS Specifications,concealed in wall, fixing on ceiling /trusses with suitable clamps , screws etc, including 1.22 mm thick MS terminal boxes with 3 mm thick plastic laminated sheet top cover fixed with cadmium plated iron screws for mounting switches, sockets, fan regulators etc.,including connecting up and testing , all as specified and as directed One switch socket out let point 5 Amps on independent board |
| 55 | M&L for point wiring with two single core 1.5 Sq.mm size multistranded FRLSH copper conductor PVC insulated cables as main conductorand one single core 1.5 Sq.mm size green colour PVC insulated,multistranded copper conductor PVC cable FRLSH as earth continuity conductor,1100 volts grade, complete drawn in and including PVC Non metatilicconcealed Conduit and conduit accessories,confirming to IS Specifications,concealed in wall, fixing on ceiling /trusses with suitable clamps , screws etc, including 1.22 mm thick MS terminal boxes with 3 mm thick plastic laminated sheet top cover fixed with cadmium plated iron screws for mounting switches, sockets, fan regulators etc.,including connecting up and testing , all as specified and as directed One switch socket out let point 5 Amps on same board |
| 56 | M&L for point wiring with two single core 4.0 Sq.mm size multistranded FRLSH copper conductor PVC insulated cables and one single core 4.0 Sq.mm size green colour PVC insulated,multistranded copper conductor PVC cable FRLSH as earth continuity conductor,1100 volts grade, complete drawn in and including PVC Non metatilicconcealed Conduit and conduit accessories,confirming to IS Specifications,concealed in wall, fixing on ceiling /trusses with suitable clamps , screws etc, including 1.22 mm thick MS terminal boxes with 3 mm thick plastic laminated sheet top cover fixed with cadmium plated iron screws for mounting switches, sockets, fan regulators etc.,including connecting up and testing , all as specified and as directed for one 3 pin 15 Amp switch socket outlet |
| 57 | Supply and fixswitch modular 5/6 Amp single pole, one way 1 module complete all as specified as directed by EIC. |
| 58 | Supply and fixswitch modular 15/16 Amp single pole, one way 1 module complete all as specified as directed by EIC. |
| 59 | Supply and fix Socketmodular 5/6 Amp single pole, 2/3 pin2 module complete all as specified as directed by EIC. |
| 60 | Supply and fixSocketmodular 6/16 Amp single pole, 2/3 pin2 module complete all as specified as directed by EIC. |
| 61 | Supply and fixUSB charging Socketmodular 5 Amp single pole, complete all as specified as directed by EIC. |
| 62 | Supply and fixing switch piano flush type 5 Amp single pole, one way complete all as specified as directed by EIC. |
| 63 | Supply and fixing socket outlet 5 pin 5 Amps, flush type complete all as specified as directed by EIC. |
| 64 | Supply and fixing Socket outlet combination 2 in 1 3 pin 6 and 16 amp flush type universal complete all as specified as directed by EIC. |
| 65 | Supply and fixing Socket outlet combination 2 in 1 3 pin 6flush type universal complete all as specified as directed by EIC. |
| 66 | Supply and fixing lamp holder insulated body with back plate for batten fitting including necessary connection complete all as specified as directed by EIC. |
| 67 | Supply and fixing for ceiling rose surface bakelite 65 x 50 mm three terminal complete all as specified as directed by EIC. |
| 68 | Supply and fix modular single phase starter 20A with green red push button for AC connection complete with on off testing as per direction by Engr-in-charge Note : make ABB ITM2MS20 or equivalent as per approved list of product |
| 69 | Supply and fixModular metal flush box 2 module with white cover plate with framefor mounting, switches, sockets, fan regulator, etc. complete all as specified and directed. |
| 70 | Supply and fixModular metal flush box 3 module with white cover plate with framefor mounting, switches, sockets, fan regulator, etc. complete all as specified and directed. |
| 71 | Supply and fixModular metal flush box 6 module with white cover plate with framefor mounting, switches, sockets, fan regulator, etc. complete all as specified and directed. |
| 72 | Supply and fixModular metal flush box 8 module with white cover plate with framefor mounting, switches, sockets, fan regulator, etc. complete all as specified and directed. |
| 73 | M & Lfor submain wiring with two single core 6.0 sqmm PVC insulated unsheathed cable multi-strand copper conductor FRLSH drawn through and including PVC non metallic rigid Conduit conceled with all fittings and fixing accessories on roof, walls, ceiling etc including 1 x 6.0 sqmm PVC insulated unsheathed multi strand copper conductor earth wire FRLSH connecting earth including cutting groove for concealed wiring, making good to disturb surface of wall/floor with cement mortar and finishes to match existing complete all as specified and directed. Note: Two run of single core cable, one run earth wire and one run PVC Conduit will be measured as one length. |
| 74 | S&F surface mounting batten tube light fitting, integrated polycarbonate LED channel with white acrylic cover complete suitable for and including lamp LED 1x20 Watt,(4 feet) fixed properly on wall surface and connecting complete from ceilling rose to fitting by three core copper conductor cable of overall sheathed size 2.5 Sqmm which shall be passed through PVC flexible conduit all as directed. |
| 75 | S&FRecces mounting (2\"X2\") 36w LED light fitting,high efficiency PMMA diffuser soft glare free highlightintegrated polycarbonate LED channel with white acrylic cover complete suitable forfixed properly on ceiling and connecting with driver completeto fitting by three core copper conductor cable of overall sheathed size 2.5 Sqmm which shall be passed through PVC flexible conduit all as directedby Engr-in-Charge |
| 76 | S&Fbuilding security light LED fitting 25/35 watt 230V AC outdoor type with high pressure die cast aluminum housing and heat resistant , epoxy powder coated dark graphite grey colour finish and prismatic polycarbonate cover with individual LED lences suitable for including lamp LED 25/35 watt, fixed / connect properly at directed location on building with IP 65/66 protection complete |
| 77 | Supply and fixing bracket for street light fittings of any size made out of GI pipe medium grade 25/32 mm dia 1.25 mtr length bend to required size and shape including provision of clamps and fittings in position and two coat of aluminum paint over a coat of red oxide primer all as specified and directed including taking down old bracket. |
| 78 | Taking down old fan and S&F for Plastic bodyExhaust Fan 250 mm sweep, single phase 230 volts AC, 900 RPMfour blade with louver shutters complete fixed properly on wall surface with the provisioning of suitable sizes of rag bolts, nuts, washer and to connect by using cable PVC insulated copper stranded conductor of size 1.5 Sqmm 3 core and overall PVC sheathed which shall be passed through PVC flexible conduit of length not exceeding 0.50 mtr all as reqd and as directed by Engr-in-Charge. |
| 79 | Taking down old fan and S&F for Plastic bodyExhaust Fan 300 mm sweep, single phase 230 volts AC, 1200 RPM copper windingfour blade with louver shutters complete fixed properly on wall surface with the provisioning of suitable sizes of rag bolts, nuts, washer and to connect by using cable PVC insulated copper stranded conductor of size 1.5 Sqmm 3 core and overall PVC sheathed which shall be passed through PVC flexible conduit of length not exceeding 0.50 mtr all as reqd and as directed by Engr-in-Charge. |
| 80 | Taking down old fan and S&FBLDC Ceiling fan 1200mm sweepsingle phase 230 volts AC, min air delivery 210 CFM with service valve 6.00 BEE 5 star ratingwithblade ,down roads electronic regulator andcomplete accessories complete fixed properly on wall surface with the provisioning of suitable sizes of rag bolts, nuts, washer and to connect by using cable PVC insulated copper stranded conductor of size 2.5 Sqmm 3 core and overall PVC sheathed which shall be passed through PVC flexible conduit of length not exceeding 0.50 mtr all as reqd and as directed by Engr-in-Charge.Note:- Taking down Old Ceiling fan deposit toAGE Vairengte E/M Store |
| 81 | S&F powder coated sheet metal enclosures MCCB DB, double door, tripple pole and neutral, 4 way 415 volts fitted with bus bar DIN rail neutral link and incoming contact complete all as specified and directed. |
| 82 | Supply and fixing powder coated sheet metal enclosuresDB, double door, single pole and neutral (SPN) 8 way 240 Volt fitted with bus bar, DIN channel, neutral link and incoming contact complete all as specified and directed. |
| 83 | Supply and fixing MCB cum change over TPN 63 Amps 415 volts. 10kAAdjustableoverload setting three mode main.hold DG supply l &fixed magnetic settingcurrent carrying capacity in theDB complete with connecting testing complete all as specified and directed. |
| 84 | Supply and fixing MCB TPN 32 Amps 10 KA 415 volts\"B\"curve and current carrying capacity in theDB complete with connecting testing complete all as specified and directed. |
| 85 | Supply and fixing MCB SPN 6-32 Amps240 volts. complete all as specified and directed. |
| 86 | Supply and fixing MCB SP 6 Amps to 32 Amps 230 Volt. complete all as specified and directed. |
| 87 | M & L for building earthing complete with galvanised steel earth plate electrode 600mm x 600mm x 6mm burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edged of the plate not less than 1.5 mtr below normal ground level,connected to galavanised iron earth lead by means ofbolt, nut, check nut and washer of galavanised iron wire 4mmas earthing lead as shown in Electrical Plate No 3 of SSR Part I connected to earthing test point all as specified or indicated including testing on completion including necessary excavation and earth work inhard/dence soil, earth pit in PCC 1:3:6 typeC1 using 20mm stone aggreate, funnel, 20mm dia GI medium grade water pipe, 15mm dia GI light grade earth lead protection pipe, CI frame and cover, wire, copper lugs,wire mesh, charcoal or coke and common salt in alterative layer all around the earth electrode compacted thickness 15 cm including excavation and earth work pit cover including disposal of surplus soil to a distance not excessding 50m, complete testing on completion all complete as shown in electrical plate No 3 of SSR Part I 2009 all as directed by Engr-in-Charge |
| 88 | Supply, laying and testing in trenches or fixing on wall or passing through pipe 1100 volts grade heavy duty cable XLPE Insulated multi stranded aluminium conductor size 70 sqmm 3-1/2 core served with an inner sheathing of PVC tape armoured with galvanised steel wire or strip and over PVC sheathed complete as per specification properly clamps on walland connection at end point with all legs ,glands etc incl taking out old rusted cable complete all as specified and directed by Engr-in-Charge |
| 89 | Supply ,laying and testingin trenches or fixing on wall or passing through pipe 1100 volts grade heavy duty cable XLPE Insulated multi stranded aluminium conductor size 16 sqmm 4 core served with an inner sheathing of PVC tape armoured with galvanised steel wire or strip and over PVC sheathed complete as per specification properly clamps on walland connection at end point with all legs ,glands etc incl taking out old rusted cable complete all as specified and directed by Engr-in-Charge |
| 90 | Supply & fixingtubes, 32mm medium grade, galvanised iron water tubes with screwed socket joint together with and including all GI fittings connection on wall or floor with clamps digging etc complete all as specified and directed by Engr-in-Charge |
| 91 | Supply & fixing tubes, 25mm medium grade, galvanised iron water tubes with screwed socket joint together with and includingall GI fittings connection on waal or floor with clamps digging etc acomplete all as specified and directed by Engr-in-Charge |
| 92 | M&L for Rewinding the armature of exhaust fan size 380/450 mmsweep exhaust fan of any make with super enamelled copper wire of suitable for incl all insulating materials varnishing complete incl satisfactory test run on full speed complete all as specified and directed by Engr-in-Charge |
| 93 | M&L for Removing rusts/dusts cleaning thoroughly with petrolto the exhust fan in situ and spray painting with one coat to ceiling fan of any size and type with 1st quality synthetic enamel paint as per exsisting colour to fan body, legs etc and writing the MES number as MES No on the fan body in black paint complete all as specified and directed by Engr-in-Charge |
| 94 | M&L for Fan hook fabricatedwith MS Flat 25X6mm 350mmlong 02 nos bend to shapedrilled with holes and MS nut, boltsandwasher of required as per side with one coatof primer and twocoatof paints as per site complete as per direction by EIC |
| 95 | Excavation in trenches / post holes in soft/loose soil not exceeding 1.5 mtrwide and not exceeding 1.5 meter in depth for taking out and laying pipe lines not exceeding 10 Sqm on plan and getting out, excavated earth, forming bottomsurfaces to required level complete all as specified and directed by Engr-in-Charge. |
| 96 | Removing excavated material (soil) not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specfied and directed by Engr-in-Charge. |
| 97 | Returning filling in including spreading leveling watering and well ramming in layers n.exc 25cm thick in soft/loose soil complete all as specified. |
| 98 | Supply & spreading in trenches dry river sand cushioning to underground cable in trenches including spreading, levelling hand punning down complete all as specified and directed Note:- Depth of sand cushioning will be measured after punning down and levelling the sand properly complete all as specifiedand directed by Engr-in-ChargeNote : Punned thickness of sand shall be measured for payment. |
| 99 | M & L for laying of bricks locally available sub class \"B\" bricks (old size) for cable protection cover laid flat and dry in trenches over the cable perpendicular to the direction of cable complete all as specified and directed by Engr-in-Charge |
