|
| 1 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 2 | Granular Sub-Base with Close Graded Material (Table:- 400-1). By Mix in Place Method.Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401. Grading-I Material. |
| 3 | Providing and laying cement concrete in foundation and plinth excluding the cost of centering and shuttering in. |
| 4 | 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 20 mm nominal size) |
| 5 | 1:2:4 ( 1 Cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 6 | Brick on edge flooring with bricks of Ist class on a bed of 12mm cement mortar including filling the joints with the same mortar with common burnt clay non modular bricks: 1:4 (1 cement: 4 coarse sand) |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for mass concrete. |
| 8 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. Thermo-Mechanically Treated bars |
| 9 | Brick work with Ist class common burnt clay F.P.S. (non modular) bricksin foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 10 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases above plinth level upto floor five level, excluding the cost of centering,shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 11 | 12 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand) |
| 12 | Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a coat of approved steel primer red oxide zinc chrome primer conforming to IS:2074-1979) welded and bolted including special shape washer etc. complete. Electric resistant welded tube (Conforming to IS:1611-1979) |
| 13 | Providing and fixing 15 cm wide 45 cm over all semi circular plain G.S. sheetgutter with iron brackets 40x3mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete.0.80mm thick with zinc coating not less than 275gm/m2 |
| 14 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture. |
| 15 | Finishing walls with textured exterior paint of required shade :New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including base coat of water proofing cement paint applied @ 2.20kg/10 sqm. |
| 16 | 2D ACP ACRYLIC SIGN BOARD |
| 17 | Installation and Delivery ChaRGES |
| 18 | IEI |
| 19 | Wiring for light point / Fan point / Exhaust Fan point / Call bell point with 1.5 mm2 FR PVC insutated copper conductor single core cable in PVCcasing & capping with modular type switch, modular plate suitable size,G.I-box and earthing the point with 1.5 mm2 FR PVC insulated copper conductor single core cable etc. as reqd. |
| 20 | 2. Group B |
| 21 | Wiring forPower Plug point with 2 x 4mm2FR PVC insutatedcopper conductor single core cable in PVC casing & capping along with 1 no. 4 mm2FR PVC insulated copper conductor single core cable for loop earthingetc. as reqd. |
| 22 | Supply and drawing the following size ofPVC insulated Al. conductor single core cable in existingPVC casing & capping etc. as reqd |
| 23 | 2.2 x 1.5 mm2 |
| 24 | 7.2 x 2.5 mm2 |
| 25 | 12.2 x 4 mm 2 |
| 26 | Wiring for circuit / Sub - main wiring along with wire with ( the following size of ) PVC insulated Al. conductor single core cable in PVC cassing & capping etc. as reqd. |
| 27 | 5.2 x 10 mm2 + 1 x 10 mm2 earth wire |
| 28 | S/F square box 12 mm to 32 mm |
| 29 | S/F brass batten/ angle holder i/c connectio etc. as reqd. |
| 30 | Supply & Fixing( followingmodular type switch / socket) on the existing switch box / cover i/c connection etc. as reqd. |
| 31 | 1. 5 / 6 amps switch |
| 32 | S/F (Following size/module) G.I box along with modular base and cover plate for modular switch in recessed as reqd. |
| 33 | 2.4 module ( 75 mm x 75 mm) |
| 34 | 3.6 module ( 200 mm x 75 mm) |
| 35 | 5.12 module ( 200 mm x 150 mm) |
| 36 | S/F 56 \" sweep (1400 mm) A.C ceiling fan complete with down rod, canopy, 3 (three ) blades but without regulator etc. as reqd. ( Make Bajaj / Usha or similar ) |
| 37 | Supplying & Fixing stepped type electronic Fan Regulator on the existing modular plate switch box i/c connection but excluding modular plate etc. as reqd. |
| 38 | S/F 3 pin 5 amp ceiling rose on the existing junction box / wooden block i/c connection etc. as reqd. |
| 39 | Providing and Fixings 125 amps TPN stand ground on load change over switch (Compact Design) 415/500 V including connection etc. As reqd. |
| 40 | S/F ( following way), single / double pole and neutral, sheet steel MCB distribution board, 240 V on surface / recessed complete with tinned copper bus bar neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, phosphatized and powder painted including earthing etc. as reqd. ( but without MCB / RCCB / Isolator) |
| 41 | 2.4 way single door |
| 42 | 3.8 way single door |
| 43 | 4.12 way simgle door |
| 44 | Supplying and fixing 5 amp to 32 amp rating 230 V \"B\" series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection, testing and commissioning etc. as reqd. |
| 45 | 1.Single Pole |
| 46 | S/F ( following rating) double pole 240 V isolator in the existing MCB DB complete with connection, testing and commissioning as reqd. |
| 47 | 2.63 amp |
| 48 | S/F 23 W CFL. Lamp |
