|
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 2 | 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20 mm nominal size) |
| 3 | 1:5:10 (1 cement : 5 coarse sand(zone-III) : 10 graded stone aggregate 40 mm nominal size) |
| 4 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: |
| 5 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 6 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: Butt hinges and necessary screws shall be paid separately) |
| 7 | Kiln seasoned and chemically treated hollock wood |
| 8 | 35 mm thick shutters |
| 9 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. |
| 10 | Particle Board 12 mm thick |
| 11 | Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS : 3087 marked |
| 12 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm all complete. |
| 13 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : |
| 14 | 250x16 mm |
| 15 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : |
| 16 | 250x10 mm |
| 17 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : |
| 18 | 125 mm |
| 19 | 150 mm |
| 20 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 21 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : |
| 22 | 300x16 mm |
| 23 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 24 | 250x10 mm |
| 25 | 150x10 mm |
| 26 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 27 | Twin rubber stopper |
| 28 | Provding & fixing 6mm thick ply BWR grade ISI marked i/c cost of adhesive/nails etc. complete in all respect as per directioon of E-in-Charge |
| 29 | Repairs to existing steel doors/windows/cupboard shutters by cutting,welding etc. wherever required with or without dismantling all complete as per the directions of Engineer-in-Charge.Cost includes the transportation of electric/gas welding plant to site. |
| 30 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 31 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 32 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc.,., complete. |
| 33 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kgper sqm including pointing the joints with white cement mixed with pigment of matching shade complete. |
| 34 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 35 | Single socketed pipes. |
| 36 | 110 mm diameter |
| 37 | 12mm cement plaster of mix:- |
| 38 | 1:6 (1 cement: 6 fine sand) |
| 39 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade. |
| 40 | Old work (one or more coats) |
| 41 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 42 | One or more coats on old work. |
| 43 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge. |
| 44 | With cement mortar 1:4 (1 cement : 4 fine sand). |
| 45 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: |
| 46 | Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
| 47 | Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm). |
| 48 | Renewal of old putty of glass panes (length) . |
| 49 | Flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for flat tile bricks on top of mud phaska : |
| 50 | With F.P.S. brick tiles |
| 51 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspectionof work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment shall be made once irrespective of duration of scaffolding.Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done. |
| 52 | Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) |
| 53 | Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in- charge. |
| 54 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with \"S\" or \"P\" trap including dismantling of old WC seat and \"S\" or \"P\" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. |
| 55 | Orissa pattern W.C Pan of size 580x440 mm |
| 56 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 57 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.. |
| 58 | In cement mortar |
| 59 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
| 60 | Of area 3 sq. metres and below |
| 61 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: |
| 62 | Of area 3 sq. metres and below |
| 63 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 64 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: |
| 65 | White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps |
| 66 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : |
| 67 | 610x510 mm bowl depth 200 mm. |
| 68 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. |
| 69 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 70 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 71 | 10 litre capacity - White |
| 72 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : |
| 73 | White solid plastic seat with lid |
| 74 | Providing and fixing kitchen sink including making all connections excluding cost of fittings. |
| 75 | White glazed fire clay sink of size 600x450x250 mm. |
| 76 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 77 | Flexible pipe |
| 78 | 32 mm dia |
| 79 | 40 mm dia |
| 80 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 81 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : |
| 82 | Rectangular shape 453x357 mm |
| 83 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : |
| 84 | 100 mm inlet and 75 mm outlet |
| 85 | Sand Cast Iron S&S as per IS- 1729. |
| 86 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. |
| 87 | 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. |
| 88 | Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms. |
| 89 | Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2\" BSP thread and shapes, weighing not less than 60 gms. |
| 90 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 91 | 15 mm nominal outer dia. Pipes. |
| 92 | 20 mm nominal outer dia. Pipes. |
| 93 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work |
| 94 | 40 mm nominal outer dia. Pipes. |
| 95 | 50 mm nominal outer dia. Pipes. |
| 96 | Providing and fixing brass bib cock of approved quality : |
| 97 | 15 mm nominal bore |
| 98 | Providing and fixing brass stop cock of approved quality : |
| 99 | 15 mm nominal bore |
| 100 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : |
| 101 | 15 mm nominal bore |
| 102 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 103 | 45 cm length |
| 104 | 15 mm nominal bore |
| 105 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : |
| 106 | 15 mm nominal bore. |
| 107 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 108 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. |
| 109 | 15 mm nominal bore |
| 110 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. |
| 111 | 15 mm nominal bore. |
| 112 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 : |
| 113 | 15mm nominal bore |
| 114 | Providing and fixing PTMT bib cock of approved quality and colour. |
| 115 | 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 116 | Providing and fixing PTMT grating of approved quality and colour. |
| 117 | Circular type. |
| 118 | 100 mm nominal dia. |
| 119 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality |
| 120 | L D - 2.5 |
| 121 | Rectangular shape 600x450 mm internal dimensions |
| 122 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
| 123 | For fixed portion |
| 124 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 125 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). |
| 126 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 127 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 128 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 129 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors,embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete asper the direction of Engineer-in-charge. |
| 130 | With stainless steel cover plate minimum 1.25 mm thickness. |
| 131 | Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. |
| 132 | Repairs to Steel gate (Main or wicket gate) by dismantling it from its existing position and refixing the same at desired position as per direction of E-in-C. This item include dismanling of cement concrete, brick work required for dismantling the gate. This item also include cost of transporation, welding to parts of gate, supports or scaffolding required to attain line & level of gate etc.. Ths cost of cement concrete, brick work and new section of MS will be paid seperately. |
| 133 | Area of MS gate shutter upto 3.00 sq or below |
| 134 | Repair to low level PVC/chinaware flushing cistern etc. complete as per the directions of Engineer-in-Charge. |
| 135 | With washer,handle & ball cock. |
| 136 | With syphon set complete |
| 137 | Repair to bib cock/stop cock to prevent leakage etc. complete as per the directions of Engineer-in-Charge. |
| 138 | Removal of Plants like Pipal Plant etc. from the roofs,shafts and from other parts of the Building at all heights and removing its roots,And pouring solution of Chlorpyriphos E.C 20% in the root of plants and making good the same complete as per direction of Engineer-in-Charge. |
| 139 | Grouting of terracing covered with tile brickswith cement mortar 1:3 (1 Cement : 3 Fine Sand) mixed with 2% of integral water profing compound by weight of cement and finished neat complete as per direction of E-in-Charge |
| 140 | Cleaning of rain water drain/overflow drainincluding lifitingof cover and placing same in original postion ,removal ofall rubbish and garbagefrom the drain and its disposal to an approved municipal dumping ground all complete as per the directions of Engineer-in-Charge. |
| 141 | P & F MS door spring to wooden door shutter i/c welding, screws or bolts to the wooden or MS door shutter complete as per direction of E-in-C. |
| 142 | Dismantling and Refixingof aluminium doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sectionsfixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc.cleat angle,Providing Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all completeafter making necessary repair as perthe directions of Engineer-in-charge. (Glazing, paneling to be paid for separately) : |
| 143 | For fixed and openableable portion |
| 144 | Cleaning of chocked Manholeby mechanical/ manual means including removaland disposal of rubbish from manhole bottom to approved dumping ground complete as per direction of Engineer - in -charge. |
| 145 | Cleaning ofchocked sewer pipes/ lines of all diametersConnectingadjoining manhole to another manholeincluding removal of sludge/ garbage from sewer pipes and adjoining manholeby means ofrodding/bamboos or mechanical means etc all complete in ordre toachieve free flow of sewer from pipes and manholes and disposal of rubbish/sludge or garbage from sewer pipes/ manholesto the approved dumping ground complete as per direction of Engineer - in -charge. |
| 146 | Providing the carpenter services/unskilled labour for attending day to day complaints on urgent basisin the BSNL Compounds within Ludhiana Business Area as per the direction of E-I-C.The agency shall provide all necessary tools and plants,ladder and scaffolding wherever required .(Nothing extra shall be paid on this account.The materials/fittings required shall be paid for separately). The services for payment are for one day ie Per Job Per day |
| 147 | Repairs to falce ceiling framework of interlocking metal grid600x600 mm consisting of main \"T\" and cross \"T\" including levelling at true plane end to end with new hangers wherever required,replacement of damaged cleats with necessary screws all complete as per the direction of E-I-C. |
| 148 | Fixing charges of water supply and sanitary fittings/ fixtures:- |
| 149 | Brass bib cock/stop cock/ball valves/CP stop cock,C.P angle cock,CP pillar cock, gate valves,pvc cisternetc. of all dia |
| 150 | PVC bib cock/ball valves/Waste pipe/PVC Syphon/ball cock/pvc handles for cistern/seat covers etc. of all sizes. |
| 151 | CPVC pipes of 20 mm dia |
| 152 | MS wire guage |
| 153 | Door stopper/tower bolts/handles/Door closure/sliding door bolt/Aluminium stays |
| 154 | Credit for old dismantled/unserviceable material received from dismantling: - |
| 155 | Old M.S section/old scrap/M.S rolling shutter/M.Stubes/MSbaretc. |
| 156 | Unserviceable wooden door/window shutter with or without chowkhats fittings |
| 157 | Brass bib cock/stop cock/ball valves/CP bibcock/CP stop cock,C.P angle cock,CP pillar cock,CP shower rose,brassgate valves, CP ring,CP brass towel rail etc. of all dia |
| 158 | PVC Bib cock,stop cock,ball cock/WC seat cover, internalfitting of low level PVC cistern etc. |
