|
| 1 | Taking down chowkhats or frame with shutter without taking off shutter from the frame exc 1.50 sqm but not exc 4 sqm each & removing from site complete all as specified and directed. |
| 2 | Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in- Charge. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 3 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 4 | Supply and fixing 100mm size butt hinges cold rolled medium weight, ISI marked complete all as specified and directed. |
| 5 | Supply and fixing200mm size MS barrel tower bolt stone enamelled black with bright bolt ISI marked complete all as specified and directed. |
| 6 | Supply and fixing 125mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 7 | S & FFactory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 8 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 9 | S&F false ceiling of Non asbestos fibre decorative cement building boards, manufactured from homogeneous mixture of cement, quartz and cellulose and cured with high pressure steam using auto claving process confirming to IS-14862, of size 605 mm x 605 mm x 4 mm thick fixed over and includinganodised aluminium powder coated (minimum thickness of powder coating 50 micron) snap grid frame workof T section (main & cross member) of size 25 mm x 25 mm x 1.5 mm thick in square pattern of grid size 605mm X 605mm.The aluminium frame work will supported on side wall with the used of aluminium \"L\" section of size 25 mm x 25 mm x 1.5 angles etc. Snap grid shall be supported with hangers of 4 mm dia. Galvanised iron wire adjusting level fixed to roof slabs / truss etc by means of ceiling cleats made out of Galvanised iron flat of size 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long including dismantling wall & ceiling boards of any description including cover fillets complete all as specifieddirected by the Engineer-in-Charge. Make : Everest or equivalent as approved by GE |
| 10 | Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, Including removal of debries out side MD land complete all specified and directed. |
| 11 | M&L for rendering10 mm thick onconcrete surface in cement mortar (1:6)as backingcoatand 5 mm th in CM 1:4 using finishing the surface even and smoothwithout using extra cement, including mixing only liquid water proofing compound as per manufacturer instruction completeall as specified and as directed on External surface. Note:- WPC will be measured & Paid separately |
| 12 | Supply only for water proofing compound. |
| 13 | S&Fin repairs Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union CP over head shower of size 125mm of approved make with CP shower arm for wall mounted showers flange complete all as specified anddirected. |
| 14 | M & L for vitrified ceramic coloured tiles 9/10 mm thick (Square or Rectangular) area of each tile exc. 0.42 Sqm but not exc. 01.00 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including 20 mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes finished fair and evenincluding dismanthing floor/hearth or wall tilling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off premises complete all as specified and as directed. |
| 15 | M&L Non-skid ceramic colour tiles (premium/special quality) 7 to 8 mm thick , (square/rectangular), area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in cement sand mortar 1:6including dismanthing floor/hearth or wall tilling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off premises complete all as specified and as directed. |
| 16 | M & L for glazed ceramic coloured tiles 450X 300X 7mm thick as on vertical surface of wall such as skirting, dado, riser etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles including 10mm thick rendring in CM (1:4) on fair faces of brick or concrete surfaces finished fair and even on vertical surfaces of wallincluding dismanthing floor/hearth or wall tilling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off premises complete all as specified and as directed. |
| 17 | Taking down plastering on lathing (other than wire-netting, without removing lathing, in cement mortar (one side only measured in cases where both sides are plastered). |
| 18 | M&L for rendering 10 mm thick on fair faces of lathing in CM 1:4 finished even and smooth without using extra cement masonry surfaces or surface other than fair face of brick-work or on other side of lathing using water proofing compound @ 3% complete all as specified anddirected. |
| 19 | Supply only for water proofing compound complete all as specified anddirected. |
| 20 | Complete removal existing treatment and applying1mm thick ofBirla white wall care putty to achieve smooth surfaces and applying two coats of Oil Bound Distemper of approved shade/tint over a coat of compatiable priming paint complete all as specified and as directed. |
| 21 | M & L for preparation of new plastered/concrete surfaces of walls, providing 1 mm thick ofBirla white wall care putty to achieve smooth surfaces and applying two coats of Oil Bound Distemper of approved shade/tint over a coat of compatiable priming paint complete all as specified. |
| 22 | M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.36 sqm, such as skirting, dado, riser etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles including 10mm thick rendring in CM (1:4) on fair faces of brick or concrete surfaces finished fair and even on vertical surfaces of wall complete all as specified and directed. |
| 23 | S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks; truss members with vertical posts and similar work conforming to Fe.290.Gde-E-165 all as specified and as directed. |
| 24 | Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and as directed. |
| 25 | Demolition of plain cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 26 | M&L for 75mm thick PCC 1:2:4 type B2 (using 40mm graded agg) as in hardstanding/path/ plinth prottection incl finishing even & smooth without using extra cement complete all as specified and directed. |
| 27 | Taking up or down steel tubing and connections for 15 mm bore of pipes complete all as specified anddirected. |
| 28 | Taking up or down steel tubing and connections for 20 mm bore of pipes complete all as specified anddirected. |
| 29 | S&F GI steel tubing medium grade 15mm bore with all fitting and fixed complete to wall and ceiling or laid under in floor complete all as specified anddirected. |
| 30 | S&F GI tubes, medium grade galvanised, 20mm bore with all fitting and fixed complete to wall and ceilings or laid in floors |
| 31 | S&F in replacement of rotational moulded polyepolyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of capacity 1000 Ltrs incl taking down old unservicable tank of any capacity all as specified and directed |
| 32 | S&F in repair float valve of size 20mm, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe all as specified and directed |
| 33 | 15mm bore stop valves, cast copper alloy, screweddown, highpressure, withcrutch or butterfly handle, screwed both ends foriron pipe orfor unions and fixed, complete all as specified |
| 34 | 20mm bore stop valves, cast copper alloy, screweddown, highpressure, withcrutch or butterfly handle, screwed both ends foriron pipe orfor unions and fixed complete all as specified anddirected. |
| 35 | S&F in repairsGunmetalgatevalve class I (ISI)markedwithironwheelhead,screwedbothendsforironpipe, suitableforfollowingboreofpipe includingtakingdownoldexisting unserviceablegate valve of dia 20 mm complete allasspecifiedanddirected. |
| 36 | S&F PVC (SWR) Pipes single socketed in any length with rubber ring joints, 110 mm bore fixed to walls complete allasspecifiedanddirected. |
| 37 | M&L for 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete allasspecifiedanddirected. |
| 38 | S&F PVC (SWR) bends 110mm dia complete all as specified and as directed |
| 39 | S&F PVC (SWR) bends 75mm dia complete all as specified and as directed |
| 40 | S&F PVC(SWR) 75mm dia vent cowls |
| 41 | S & F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified anddirected. |
| 42 | S & F in repairs Vitreous China EWC including seat cover closed pattern single piece size 755x365x655 complete all as specified anddirected. |
| 43 | S&Fin repairs vitreous China clay table top WHB of size 635x430x190 mm incl waste coupling complete all as specified anddirected. |
| 44 | S&F in repairs Brass CP 2-in-1 Bibcock with flange complete all as specified anddirected. |
| 45 | S&F in repair fancy type tall body with 155 mm extension body fixed spout without popup waste system with 600 mm long braided hoses complete all as specified anddirected. |
| 46 | S&Fin repairs 15 mm bore CP health Foucet cock with Flexible pipe 1 m long complete all as specified anddirected. |
| 47 | S&F in repairs Soap dish holder complete all as specified anddirected. |
| 48 | S&Fin repairs Toilet roll holder with stainless steel flap complete all as specified anddirected. |
| 49 | S&Fin repairs Towel ring sqare shape stainless steel complete all as specified anddirected. |
| 50 | S&F in repairscorner glass shelf with bracket complete all as specified anddirected. |
| 51 | S & F in repairs Towel rack 600mm long with lower hangers , stainless steel complete all as specified anddirected. |
| 52 | S&F in repairs Brass CP angular stop cock fancy type with Capstan heads complete all as specified anddirected. |
| 53 | S&F in repairs Brass chromium plated bottle traps 32 mm dia for wash basins with inlet and outlet screwed for pipe or connections incl necessary packing uniun and cap and fixed in repairs. |
| 54 | S&F in repairs bevelled edge mirror or selected quality glass, mounted on 6 mm thick AC building board or commericial ply wood and fixed to wooden plugs with CP brass screw and cup washer. |
| 55 | S&F harrison rails, aluminium anodised alloy, with fixing brackets, stops, rollars etccomplete all as specified and as directed |
| 56 | S& F of brackets decorative for curtain rails complete allasspecifiedanddirected. |
| 57 | S & F of 2nd class hard wood scantling, clean sawn in any position and any description as in framed work including dismantling of timber scantling 40 Sqcm and over in section, in any position as in unframed or framed workcomplete all as specified and directed. |
| 58 | Taking down carefully aluminium/copper conductor point wiring (light,fan,socket or power) completeincluding fittings such as switches,ceiling roses, pendants, regulators ,sockets etc. and removing(except those to be reused shall be kept in safe custodyat the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing complete allasspecifiedanddirected. |
| 59 | Material and labour forPoint wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked,including 20 mm casing caping/concealedPVCon wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductorgreen colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, includingincludingaccessories including making goodthe disturbed surfaces as per existingfor one light point controlled by one switch complete all asspecified anddirected. |
| 60 | All as per item No. 59 above but One 3 pin 5 Amps socket out let points on same board |
| 61 | All as per item No. 59 above but One 3 pin 5 Amps socket out let points on independent board |
| 62 | Material and labour casing caping point wiring for power point controlled by one, one wayswitch using2.5 sqmm nominal cross sectional areamultistrandedcopper conductor ,PVC insulated unsheathedFRLSH cables in and including 20 mm width or higher size PVCcasing caping and fittings of medium grade, including including pressed steel / PVC terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked)fitted with chromium plated brass screws & washers and 2.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLSHPVC insulated unsheathed earth wire and connecting to earth dolly andbrass screws, washers etc. complete all as specified and directed. |
| 63 | Supply and fixing casing caping submain wiring for DBs/ Power Point,two single core ,4 sqmm nominal cross sectional areamultistrandedcopper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts gradedrawing in and including suitable sizePVC casing caping (ISI marked) including 4 sqmm nominal cross sectional areamultistrandedcopper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade earthwireincluding taking down old unserviceable onecomplete all as specified. |
| 64 | Supply and fixing casing caping submain wiring for DBs/ Power Point,two single core ,6 sqmm nominal cross sectional areamultistrandedcopper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts gradedrawing in and including suitable sizePVC casing caping (ISI marked) including 6 sqmm nominal cross sectional areamultistrandedcopper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade earthwireincluding taking down old unserviceable onecomplete all as specified. |
| 65 | Supply and fixing modular bell push 1 way 6A module 230/250 volt , AC supply,ISI Marked, with cover platecomplete all as specified and directed. |
| 66 | Supply and fixing modular switch 1 way 6A module 230/250 volt , AC supply,ISI Marked, with cover plate complete all as specified and directed. |
| 67 | Supply and fixing modular sockets 6A 2/3 pin combined 2 module 230/250 Volts,50 Hz , AC supply, ISI Marked, with cover platecomplete all as specified and directed. |
| 68 | Supply and fixing modular sockets 6A/16A 2/3 pin combined 2 module 230/250 Volts,50 Hz , AC supply, ISI Marked, with cover plate complete all as specified and directed. |
| 69 | Supply and fixing modular switch 16A1 module 230/250 Volts,50 Hz , AC supply, ISI Marked, c with cover plate omplete all as specified and directed. |
| 70 | S & F blanking plate to fill empty space of switches SPs etc complete all as specified and as directed. |
| 71 | S & F Modular cover plate with frame & flush box of 6 modules,complete all as specified and as directed. |
| 72 | S & F Modular cover plate with frame& flush box of 3 modules,complete all as specified and as directed. |
| 73 | S & F Modular cover plate with frame& flush box of 2 modules,complete all as specified and as directed. |
| 74 | S & F Modular cover plate with frame & flush box of 1 module,complete all as specified and as directed. |
| 75 | Supply & fix ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified. |
| 76 | Supply and fixing call bell ding dong, AC, 230 V, Single pole ISI marked all as specified and directed. |
| 77 | Supply and fix 18 W LED warm light fitting wall mounted batten 4\"ft ,extruded aluminium housing, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 18 watt,6000K including necessary connection complete all as specified and directed. |
| 78 | Supply and fix 10 W LED warm light fitting wall mounted batten 2\"ft ,extruded aluminium housing, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 18 watt,6000K including necessary connection complete all as specified and directed. |
| 79 | Supply and fixing in repair warm LED round/rectangular shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete. |
| 80 | S & F Wall bracket decorative LED light Light fitting with lamp10 Watt warm type metalic housing complete with necessary connection including taking down old unserviceable one complete all as specified and directed by Engr-in-charge |
| 81 | Supply and fix epoxy powder coated sheet metal enclosure for DBs, double door, Single pole and neutral 240 V, 12 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contactincluding taking down old unserviceable one complete all as directed. |
| 82 | Supply and fixMCB SP,6 to 32 Amps, \"C\" series 10kA, 240 Voltsand to be housed in DBs including necessry connection complete all as specified and directed. |
| 83 | Supply and fix RCBO with earth leakage, over load and short circuit proptection, DP, 240 Volts, 32 Amps, 30 mA senstivitycomplete all as specified and directed including taking down old one complete all as specified and as directed. |
| 84 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 250mm sweep with, blades, and frame and louvers complete all as specified and as directed. |
| 85 | S & F of Hot water storage (Geyser) 25 Ltrs capacity,BEE 5 star rated,vertical type,digital temperature display with suitable size of fastner and incl provision and connecting up of SS braided pipe with adopter for inlet and outlet water connection, copper element corrosion resistance antiscaling magnesium anode, having adjustable knob for temperature control and inner tank material of superior glassline coating / percelain Enamel Coating / Titanium Enamel Coating / Nano Blue Diamond Glass Coating / Coating with Single Weld line tank and outer body material ABS with high pressure with standing capacity upto 8 bar presuure, Multiple safety systems for protection against dry heating, overheating and over pressure, IPX4 waterproof technology for longer product life having heating element 2 KW and minimum two year warranty on product, minimum 3 years warranty on heating element 5 years on tankcomplete all as specified and directed. |
| 86 | Material and labour for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased inand including 40 mm dia GI \"lightgrade\" pipe from upper end of earth plate upto equipments,20 dia bore GI pipe \"light grade\" as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe andPCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as describedin electric plate of SSR Part I completeall as specified and directed and testing on completion. |
