Tender For Additional / Alternator To Bldg No. P-24 At Domestic Area In Mcc, Additional / Alternator To Sncos Living In Accn, Additional / Alternator To Certain Toilets In Rock View Area And Provn Of Hard Stand Platform Grouting At Af Stn Palam Under Ge (, Palam-Delhi

TDR : 54182435

Tender Notice
BOQ

19 Days Left

Palam , Delhi

Tender Brief : Tender For Additional / Alternator To Bldg No. P-24 At Domestic Area In Mcc, Additional / Alternator To Sncos Living In Accn, Additional / Alternator To Certain Toilets In Rock View Area And Provn Of Hard Stand Platform Grouting At Af Stn Palam Under Ge (

Document Fees
₹ 500 /-

EMD
₹ 88300.0 /-

Tender Value
₹ 44.14 Lakhs /-

Submission Date
13-03-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Taking down chowkats or frames with shutters (without taking off shutters from the frames) area n exc. 1.5 sqm each and credited to the contractor complete all as specified and as directed by Engineer-in-ChargeNote: The damaged portion of the tiles/rendering shall be made good with the same material to match with the adjacent surface.
2	Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exc 1.5 sqm but n exc 4.0 sqm each and credited to the contractor complete all as specified and as directed by Engineer-in-ChargeNote: The damaged portion of the tiles/rendering shall be made good with the same material to match with the adjacent surface.
3	Taking down shutters of any description area exc 1 sqm and not exc 2 sqm each complete all as specified and as directed.
4	Taking down shutters of any description area n exc 1 sqm each complete all as specified and as directed.
5	Refixing of shuttersafter easing and adjusting including refixing builders hardware as required including renewal of unserviceable screws, etc of any description area exc 1 sqm and n exc 2 sqm each in same opening complete all as specified and as directed by Engineer-in-Charge.
6	Refixing of shuttersafter easing and adjusting including refixing builders hardware as required including renewal of unserviceable screws, etc of any description area n exc 1 sqm each in same opening complete all as specified and as directed by Engineer-in-Charge.
7	Taking down steel window and ventilator (without taking off shutters from the frames) including grills etcand removing from site and making good the disturbed protion in CM (1:3) or PCC (1:2:4) type B1 complete all as specified and as directed by Engineer-in-Charge. Note:- The damaged portion of the tiles / rendering shall be made good with the same material to match with the adjacent surface.
8	S&F pressed steel frames made out mild steel sheet 1.25 mm thick, with size of frame 105 mm x 60 mmfor doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates, hold fasts etc and applyinga shop coat of red oxide primer including providing PCC (1:3:6) type C-0 using 12.5 mm graded crushed stone aggregate for filling hollow portion of chowkhats complete all as specified and as directed by the Engineer-in-Charge .
9	S&F pressed steel frames made out mild steel sheet 1.25 mm thick, with size of frame 125 mm x 60 mmfor doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates, hold fasts etc and applyinga shop coat of red oxide primer including providing PCC (1:3:6) type C-0 using 12.5 mm graded crushed stone aggregate for filling hollow portion of chowkhats complete all as specified and as directed by the Engineer-in-Charge .
10	S&F rolled mild steel grade Fe-290 Gde-E-165 as inframed work as in doors or gates of angle or other section gates of with gusset plates, rails, cladding, chowkhats/frame or like etc welding hold fast, hinges complete all as specified and as directed.
11	S&F factory made 35mm thick flush shutter solid core construction, with block board core and plywood face panels, commercial type on both sides with and including two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.Note:- The cost of sash bar, 2 nos 150mm aluminium handles, 2 nos 200mm long aluminium tower bolts, 3 Nos 100mm aluminium hinges for each shutter shall be deemed to be included in unit rate.
12	M&L for 2nd class hard wood factory made 35mm thick glazed and skelton shutters open repated and prepared for door to receive framing plain chamfered or rounded fitted with cut and mitered heads for securingstainless steel wire cloth 0.36mm nominal dia of wire and average width of apertupre 1.40mm and second class hard wood plain fillets, square, rectangular or triangular in section, and secured with nails or screws, clean sawn and sectional area exc 13 Sq cm and not exc 25 Sq cm with and including two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed. Note:- (a) The cost of sash bars, 01 no mild steel300mm size ordinary rat tail rod pattern springs including roller and roller plate, 2 nos 150mm aluminium handles, 2 nos 200mm long aluminium tower bolts, 3 Nos 100 mm size aluminium hinges, necessary wooden fillets min 5Rm in each shutter and stainless steel wire mesh and two coats synthetic enamel painting over a coat of primer shall be deemed to be included in unit rate.
13	S&F factory made single extruded WPC (Wood Polymer Composite) solid pre-laminatedmoulded flush door shutter of 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/sqmm, modulus of elasticity 850 N/sqmm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws complete all as specified and as directed by Engineer-In-Charge. Note:- The cost of 2 nos 150mm aluminium handles, 2 nos 200mm long aluminium tower bolts , 3 Nos 100 mm aluminium butt hingesfor eachleaf /shutterand necessary S S screws shall be deemed to be included in unit rate.
14	S&F factory made double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other frames / chowkhat of size (65 x 125)mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed stainless steel screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/sqmm, modulus of elasticity 900 N/sqmm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ stainless steel dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note:- (a)MS hold fast/ lugs or stainless steel dash fasteners shall be measured and paid separately (b) WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
15	S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other frames/ chowkhat of size (45 x 70)mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed stainless steel screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/sqmm, modulus of elasticity 900 N/sqmm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ stainless steel dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note:- (a)MS hold fast/ lugs or stainless steel dash fasteners shall be measured and paid separately (b) WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
16	M&L for providing and fixing factory made uPVC white colour casement (Openable) door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass.
17	S&F factory made 5 mm thick PVC sheet of density 600 kg/cum manufactured by an ISO 900-2008 certified company, plain 5mm thick PVC sheet panelling for back side (wall side) with and including taking down of existing back side (wall side) or any kind of PL board or plyboard complete all as specified and as directed. Note:- Manufacturer\"s test reportand test certificate is mandatory with each and every supply of material.
18	M&L for 18/19mm thick WPC solid board, exterior grade, pre-laminated one side with decorative choice laminations and other side balancing white lamination, fixed with SS screws to WPC/ other frame work including 2mm thick laminated taps looping all round edge as in kitchen drawers & cabinet, cupboard shutters etc including hanging arrangement and design as approved by Engineer- in- charge.
19	S&F 30mm width of flaps continuous (piano) hinges, stainless steel, bright finish or electrogalvanised complete all as specified and as directed by Engineer-in-Charge.
20	S&F auto closing hinges openable at 0 degree for cabinet shutters complete all as specified and as directed.
21	S&F 50mm magnaetic catches with brass body and striking plate including letting in as fixed complete all as specified and as directed.
22	S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of brass polished complete all as specified and as directed.
23	S&Fstainless steel basket with roller (size as per ground requirement) for kitchen cabinet complete all as specified and as directed.
24	S&F stainless steel hydraulic hinges fixed with stainless steel screw (size as per ground requirement) complete all as specified and as directed.
25	S&F aluminium alloy, anodised, sliding door bolt 300mm length with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed by Engineer-in-Charge.
26	S&F in repair 150mm long aluminium anodised, handle of extruded section fabricated type complete all as specified and directed.
27	S&F in repair aluminium, anodised, barrel tower bolts 150 mm size of extruded section complete all as specified and as directed.
28	S&F in repair 125mm long aluminium anodised, handle of extruded section fabricated type complete all as specified and directed.
29	S&F 100mm long aluminium stainless steel complete all as specified and directed.
30	S&F in repair 200mm long aluminium anodised, handle of extruded section fabricated type complete all as specified and directed.
31	S&F aluminium, anodised, barrel tower bolts 125mm size of extruded section complete all as specified and as directed.
32	S&F aluminium, anodised, barrel tower bolts 200mm size of extruded section complete all as specified and as directed.
33	S&F in repair butt hinges, medium weight, cold rolled mild steel 100mm size complete all as specified and as directed.
34	S&F in repair butt hinges, medium weight, cold rolled mild steel 75mm size complete all as specified and as directed.
35	S&F floor door stopper of aluminium alloy body 140 mm cover plate and tounge, anodised with hard drawn steel spring fixed in floor complete all as specified and as directed by Engineer-in-Charge.
36	S&F door strip comprising of aluminium holds & rubber strip fixed at bottom of door shutter with screws, length upto 1.0 m each strip complete all as specified and as directed by Engineer-in-Charge.
37	S&F in repair mild steel ordinary rat tail rod pattern springs including roller and roller plate of 300 mm length complete all as specified and as directed by Engineer-in-Charge.
38	S&F hasp & staple 125mm size, safety type aluminium anodised with mild steel hinge pin including bolt, two hinge plate and fixed with screws complete all as specified and as directed by Engineer-in-Charge.
39	S&F 50mm magnaetic catches with brass body and striking plate including letting in as fixed complete all as specified and as directed.
40	S&F 40 mm size stainless steel piano hinges complete all as specified and as directed.
41	S&F 25mm dia not less then 1mm tthickaluminium Drapery rod, PVC coated finish including teak wood brackets & end knobas required with teak wooden curtain rings etc complete all as specified and as directed. Note:- Minimum 2 Nos brackets, 02 Nos End knob and 12 Nos rings in each door/ window shall be provided.
42	M&L for preparation of new or previously untreated wood and wood based surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engineer-in-Charge.
43	M&L for preparation of old painted surfaces of wood and wood based material of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
44	Hacking out old broken glass, any thickness, size, quality or description from wooden/metal frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete upto 4th storey building complete all as specified and as directed.
45	S&F sheet glass 3mm thick, ordinary quality and glazing with oil putty / wooden beads in square or rectangular in section n exc 0.5 sqm in each pane complete all as as specified and as directed by Engineer-in-Charge.
46	S&F figured glass pin head type 5mm thick n exc 0.5 sqm each and glazing with oil putty complete all as specified and as directed.
47	S&F in repair stainless steel wire cloth0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.
48	S&F stainless steel wire cloth0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.
49	S&F windows & ventilators fabricated from rolled formed GI section made of galvanised steel colour coated (PPGI Sheets) (Base steel as per IS 513 ‘’D’’ quality). Galvanised as per IS 277 with Zinc of 120 gms/Sqm. PAINT: Pre-Painted sections should be with primer coat of epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyl backer of 5-7 microns or powder coated with pure polyester powder upto 50-60 microns thick. GI section of 0.58mm thick in double rebate windows in both glazed shutter andflymesh shutter, (75 x 58)mm outer frame, mullion (74 x 53)mm, glazed shutter (52 x 50)mm, flymesh (42 x 21)mm, beading for glass fixing (12 x 12)mm in fixed portion and the outer frame and mullions to have rebate for glazed/gauzed shutters the sections cut to length metre joined with corner Poly Vinyl Chloride brackets centre mullion fixed with Poly Vinyl Chloride Mullion caps. Glass of 4mm thick plain float glass fitted with rubber gasketin glazed shutterand wiremesh of stainless steel of 36 guage to fix mesh in mesh shutter using VC Gypsum drywall screws and spoon profile of 0.58mm GI Sheet. Corners of the windows should be joined with corner brackets made of poly vinyl chloride with CRCA of zinc phosphate coat. Each glazed shutter and fly mesh shutter shall be provided with SS Pivot Hinges 2 nos in each,Poly Vinyl Chloride handle - 1 no in each and powder coated peg stay in glass shutter. Window shall be provided with enamel paint MS Grill/ guard bars made of 10mm horizontal MS square bar welded to 6 x 12mm MS flat with holes at both vertical ends. Gap between the bars should not be more than 152mm. Window frames shall be fixed to brick / concrete masonry by using nylon self expansion caps & 75/100mm MS screwsafter drilling in walls. VC Gypsum drywall screws should be used while fixing corner brackets, stay, hinges, mullion caps of windows. Type-4000 series ref drg No CEAF/STD-191/2014 SH1/2&2/2.
50	Supply and fixing 12mm thick gypsum board suspended ceiling system of any shape and size with ISI grade GI framing of intermediate channel (15 x 45 x 15 x 0.9)mm, perimeter channel and ceiling angle (25 x 10)mm section with connecting clip 2.64mm dia including all hardware i.e soffit cleat, rawl plug, edge bead, angle bead, nut & bolt, dry wall screws, hangers etc with all hanging accessories, cut out to made for lighting, fixture and AC grills, including two coats of oil bound distemper over cement base putty complete all as specified and as directed.
51	Demolition of reinforced cement concreteof any description if cement concreteis reinforced (reinforcement cut as required to facilitate demolition) in any position not otherwise specifically provided for complete all as specified and as directed.
52	M&L for RCC, type B1 (1:2:4) (20mm graded stone aggregate) for slabs supported on walls, beams and columns in floors, roofs, roof beam, cantilever, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by Engineer-in-Charge.
53	Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid in cement mortar of any thicknes complete all as specified and as directed by Engineer-in-Charge.
54	M&L forgranite (of any type) work (table rubbed and polished) 20mm thick as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cutting for hole, rounding of edges and mirror polishing over and including 15mm thick screed bed in CM (1:4) complete all as specified and as directed by Engineer-in-Charge. Note:-(a) Unit rates includes for necessary raking, circular cutting or notching and waste on Granite.(b) This item shall be used in cooking platfom counter top etc.
55	Roughening surfaces of old concrete floor by picking, sweeping, clean and washing down with water to remove dust, etc. complete all as specified and as directed by Engineer-in-Charge.
56	Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engineer-in-Charge.
57	M&L for coloured glazed ceramic tiles as in vertical surfaces of size (450 x 300)mm x 7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to matchover and including rendering 10mm thick in CM (1:4) on fair faces of brick work or concrete surfaces as backing coat complete all as specified and as directed.
58	M&L for joint free non skid coloured ceramic tiles, 7 to 8mm thick (squre or rectangular)area of each tile n.exc. 0.11sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces, laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.
59	M&L for joint free anti skid coloured ceramic tiles, 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.18sqm but n. exc. 0.36sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces, laid over & including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.
60	M&L for digital coloured tiles as in vertical surface exceeding 0.18 Sqm but not exceeding 1.00 sqm, 8 to 10 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering with CM (1: 4) as on vertical surfaces such as skirting, dados, etc complete all as specified and as directed.
61	M&L for repair work of existing terrazzo topping tiles and Kota stone etc including grinding andbees wax polishing in floors, skirting, dado etc, with admixture of pigment to match the shade complete all as specified and as directed by Engr-in-Charge.
62	M&L for cement concrete (1:5:10) type E2 (using 40mm graded crushed stone aggregate) as in foundations, mass concrete and filling in sunken floor etc complete all as specified and as directed.
63	Demolition of cement concrete from sunken floor, roofs, floors (other than ground floor) hacking of surfaces after cleaning with wire brush (floor and adjoining walls) and disposing off debris outside MOD land complete all as specified and as directed.
64	Dismantling existing roof brick tiles/roof treatment including roof plaster of any thickness and removing debries from sites to out of MoD land complete all as specified and as directed by Engr-in charge.
65	Supply onlyIntegral Water Proofing compound complete all as specified and as directed by Engr-in charge.
66	Supply onlyliquid Water Proofing compound complete all as specified and as directed by Engr-in charge.
67	M & L for special treatment for sunken portion of WCs/Bath & toilet etc executed in following stages :Stage 1:Providing 15mm thick plaster in CM (1:3) mixed withwater proofing chemical of Dr.Fixit or Shalicrete \"R\" of STP Ltd in the proportion/quantity all as per manufacturer\"s instructions.State 2 : Primer-Mix Tarfelt LM of STP Ltd (diluted with water in ratio 1:1) @ 250 gms/sqm and apply the primer on the plastered surfaces.Stage 3 : Application of 1st coat of Tarfelt LM of STP Ltd (without dilution with water) @ 1Kg/Sqm by brush all as per manufacturer\"s instructions.Stage 4:Laying fiber glass cloth (weight not less than 50gram/ Sqm) over the 1st coat while the coated surface is still sticky.Stage 5:After 6 to 7 hours interval, apply second coat i.e. final coat of Tarfet LM of STP Ltd (without Dilution with water) @ 1kg/ Sqm by brush as per manufacturer\"s instructions.Stage 6:Providing 10mm thick protective plaster in CM (1:3) mixed with STP No. 1 @ 250ml/50 Kg cement all as per manufacturer\"s instructions.Stage 7: Carryout ponding test for 48 hours to ensure water tightness of repaired sunken portion. NOTES :(i)Mode of measurement:- Actual area treated (floor and adjoining walls) will be measured and paid .
68	M&L for preparation of plastered/concrete surfaces of roof and applying the under mentioned course of roof treatement complete all as specified and as directed by Engineer-in-Charge.:-(a) Plastering 10mm thick in cement mortar (1:4) on concrete surfaces using WPC @3% by weight of cement, finished even and smooth(b) Surface shall be thoroughly wire brushed, cleaned, washed, dried up properly and apply evenly a bituminuous primer coat conforming to IS @0.4 ltr /Sqm over concrete / plastered roof surface.(c) Applying evenly a tack coat of bitumen 85/25 grade @1.20 kg/ sqm.(d) Laying of 3mm thick APP membrane sheet (min weight 3 Kg/Sqm) consistingof a core of 160 gms/Sqm polyster non woven fabric mat protected on both sides with a high quality polymeric asphaltic mix again protected with thermo fusible HMHDPE FILM on dried primed surface by torch application method. APP membrane will normally be laid in length at right angle to the direction of slope. The overlap shall be minimum 100mm on longitudinal direction and 150mm on the transverse direction including cuttings, grooves etc.(e) Membrane bonded completely to the substrate & the over laps are then scaled/fused by flame.
69	M&L for preparation of plastered/concrete surfaces of roof and applying the under mentioned course of roof treatement complete all as specified and as directed by Engineer-in-Charge.:-(a) Plastering 15mm thick in cement mortar (1:4) on concrete surfaces using WPC by weight of cement, finished even and smooth(b) Surface shall be thoroughly wire brushed, cleaned, washed, dried up properly and apply evenly a bituminuous primer coat conforming to IS @0.4 ltr /Sqm over concrete / plastered roof surface.(c) Applying evenly a tack coat of bitumen 85/25 grade @1.20 kg/ sqm.(d) Laying of 3mm thick APP membrane sheet (min weight 3.6 Kg/Sqm) consistingof a core of 160 gms/Sqm polyster non woven fabric mat protected on both sides with a high quality polymeric asphaltic mix again protected with thermo fusible HMHDPE FILM on dried primed surface by torch application method. APP membrane will normally be laid in length at right angle to the direction of slope. The overlap shall be minimum 100mm on longitudinal direction and 150mm on the transverse direction including cuttings, grooves etc.(e) Membrane bonded completely to the substrate & the over laps are then scaled/fused by flame.(f)Two coats of water proofing aluminium paint on top of APP membrane shall be applied as directed.
70	M&L for plain cement concrete tiles of size (30cm x 30cm) x 20mm thick machine pressed, set & pointed in neat cement slurry in floor with grey cement and no pigment and cutand polished on roofover and including 15 mm thick screed bed in CM (1:4) including material and labour for necessary scaffoldingand formwork (G+2 storeys) and safety arrangement complete all as specified and as directed.
71	M&L for PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in roof padding, kerbs, coping, window cills, benching etc including weathering, slightly rounded or chamfered angle and throating complete all as specified and as directed.
72	Rooting out trees, flora & faunaand foliage as grown on RCC roof surfaces and brick/stone walls by cutting hole into slabs/walls for digging out roots and using chemical to burn deep rooted tree roots etc and making good disturbed portion of wall/roof with cement concrete (1:2:4) type B1 complete all as specified and as directed.
73	Dismantling water tank of capacity exc. 250 ltr and n. exc. 500 ltr and removing to store complete all as specified and as directed by Engr-in charge.
74	S&F 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layered white, hoisted and fixed in position all as specified in SSR Part I with and including anti mosquito cap, GI washout pipe and overflow pipe, 20mm ball brass valves high pressure with polythene float and flynut complete all as specified and as directed by Engr-in charge.
75	S&F 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layered white, hoisted and fixed in position all as specified in SSR Part I with and including anti mosquito cap, GI washout pipe and overflow pipe, 20mm ball brass valves high pressure with polythene float and flynut complete all as specified and as directed by Engr-in charge.
76	Disconnecting existingwater tank 500litres but n. exc 1000 litres capacity in any position, setting aside for repairs, cleaning and removing all scales, dirts etc from tank and mouth of circulating pipes etc and re-fixing in position complete all as specified and as directed by Engineer-in-charge.
77	S&F framed work for cooler stand /doors or gates of angle iron fixed with window upto two storey bldg including cutting brick work /stone masonry/ cement concrete of size (100 x 100 x 100) mm& filling with PCC (1:2:4) and making good the disturbed surface complete all as specified and as directed by Engr – in – charge.
78	Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and as directed by Engineer-in-Charge.
79	M&L for brick work with sub-class `B\" bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar (1:6) complete all as specified and as directed by Engineer-in-Charge.
80	M&L for brick work with sub-class `B\" bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar (1:6) except brick complete all as specified and directed by Engineer-in-Charge.Note:- Old brick shall be used retrieved from srl item No. 66.00 here in before.
81	M&L for brick work with sub-class `B\" bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge.
82	M&L for providing and injecting chemicalemulsion for Post Constructional Antitermite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and as directed by Engineer-in-Charge.
83	M&L for Antitermite Treatment of wood work such as chowkhat or shutters by at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6 mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same with putting complete all as specified and as directed by Engineer-in-Charge
84	Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for keys, scrubbing down with water, etc complete all as specified and as directed by Engineer-in-Charge.
85	M&L for 15 mm thick cementplaster on fair faces of brick work or concrete surfaces in cement mortar (1:6), to befinishedeven and smooth without usingextra cement complete all as specified and as directed.
86	M&L for 15 mm thick cementplaster on fair faces of brick work or concrete surfaces in cement mortar (1:4), to befinishedeven and fairwith mixing water proofing compound by weight as per manufacturer\"s instructions including necessaryscaffoldingup to (G+3 storey) complete all as specified and as directed. Note:- WPC shall be measured and paid separately.
87	M&L for 15 mm thick cementplaster on fair faces of brick work or concrete surfaces in cement mortar (1:4), to befinishedeven and smooth without using extra cement complete all as specified and as directed.
88	M&Lfor 10mm thick plaster on fair faces of brick work or concrete surfaces in cement mortar (1:3) as in ceilings, to befinishedeven and smooth without using extra cement complete all as specified and as directed.
89	M&L for rendering dubbing coat over damaged irregular surface of chajjas, roof projections, ceiling, fascia etc average 15 mm thick in CM (1:4) over cement slurry coat thick @3 Kg /Sqm making the surface even followed by 5 mm thick rendering in CM (1:3) finished even and smooth including making of drip course as required complete all as specified and as directed. NOTE:-(a) The cost for form work if required shall be deemed to be included in the unit rate quoted by the contractor.(b)The cost of roughening surface of RCC/PCC by picking, sweeping clean and washing down with water etc. shall be deemed to be included in unit rate. `
90	M&L for preparing plastered or unplastered new surfaces on ceilings including brooming down or steel wire brushing, scraping down and applying three coats of white wash complete all as specified and as directed.
91	M&L for preparing oldsurfaces on ceilings including brooming down or steel wire brushing, scraping down and applying two coats of white wash complete all as specified and as directed.
92	M&L for preparation of new plastersurface of walls, chajjas, soffits & beamincluding necessary scaffolding and applying two coats of acrylic smooth exterior paint of required shade 1.43 ltr / 10sqmover a coat of exterior primer 2.20 kg / sqmcomplete all as per manufacturer\"s instructions and as directed by Engineer-in- Charge.
93	M&L for complete removal of existing surface of walls, chajjas, soffits & beamincluding necessary scaffolding andtwo coats of acrylic smooth exterior paint of required shade @ 1.43 ltr / 10sqmover a coat of exterior primer @ 2.20 kg/sqmcomplete all as per manufacturer\"s instructions and as directed by Engineer-in- Charge.
94	M&L for preparation of new plasteredsurfaces of wall and applying 1mm thick (min) cement based wall care putty over a coat ofalkalic resistent primer and two coats of oil bound distemper up to double storey building complete all as specified and as directed by Engineer-in-Charge.
95	M&L for preparation of new plasteredsurfaces of ceiling and applying 1mm thick (min) cement based wall care putty over a coat ofalkalic resistent primer and two coats of oil bound distemper up to double storey building complete all as specified and as directed by Engineer-in-Charge.
96	Complete removal of existing treatment from external surfaces of walls & ceilings by mechanically and washing, rubbing down and stopping of surface holes and cracks using necessary filling compound of white cement and fine sand in the ratio of (1:3) to obtain smooth regular/even finish using sand paper with and incuding applying 1 mm thick (min) cement based wall care putty and one coat of alkalic resistent primer and two coats of oil bound distemper onwall etc. complete all as specified and as directed by Engineer-in-Charge.
97	M&L for preparation of new or previously untreated surfaces of steel of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
98	M&L forpreparationofoldpaintedsurfacesofsteelandiron surfacesofany descriptionnototherwise described over10cm width&girth and applying onecoatof synthetic enamelpaint complete all asspecified and as directed byengr-in charge.
99	M&L for writing letter or figures (Block, roman, Italic or Indian) n. exc 30 cm high using synthetic enamel paint complete all as specified and as directed by Engr-in-Charge. Note:-(a)Letters under 2cm height shall be measured as 2cm. (b)Letters shall be painted with thick paint so that they stand out boldly and solidly without showing signs of brush marks, if necessary, they shall be repainted until the desired result is obtained.
100	Taking up or down steel water tubing 15mm bore and connections complete all as specified and as directed by Engineer-in-Charge.
101	S&F GI tubes 15 mm bore \"medium grade\" with all fittings and fixed completeto walls and ceilings or laid in trenches or cutting chases in wall and making good to disturbed portion of wall complete all as specified and as directed by Engineer-in-Charge.
102	Refixing of old steel tubing 15mm bore and connection with new fittings in new or old position complete all as specified and as directed. Note:- Old GI pipe shall be retrieved from Ser item No. 86.00 here in above.
103	Taking up or down steel water tubing 20mm bore and connections complete all as specified and as directed by Engineer-in-Charge.
104	S&F GI tubes 20 mm bore \"medium grade\" with all fittings and fixed completeto walls and ceilings or laid in trenches or cutting chases in wall and making good to disturbed portion of wall complete all as specified and as directed by Engineer-in-Charge.
105	Refixing of old steel tubing 15mm bore and connection with new fittings in new or old position complete all as specified and as directed. Note:- Old GI pipe shall be retrieved from Ser item No. 89.00 here in above.
106	S&F in repairs vitreous china wash hand basin white, flat back of size (550 x 400)mm including iron brackets, cutting for and pinning in ends of brackets or erecting stand including brass CP union/waste fitting of 32mm dia and discharge pipe of 32mm dia PVC of 1.0 m length complete all as specified and directed
107	S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed by Engineer-in-Charge.
108	S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed by Engineer-in-Charge.
109	S&F PVC Bothroom mirror cabinet of size 125mm depth x 450mm wide x 550mm hightcabinate of selected quality glass mounted chromium plated brass screws and cup washers complete all as specified and as directed by Engineer-in-Charge.
110	S&F (1200mm x 600mm) bevelled edge mirror of selected quality glass mounted on 6 mm thick AC building board or commercial ply wood and fixed to wooden plugs with CP screws and cap washers with teak wooden beads complete all as specified and as directed by Engineer-in-Charge.
111	S&F600mm x 450mm bevelled edge mirror of selected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed by Engineer-in-Charge.
112	S&F in repair vitreous china squatting pan, \"Orissa\"pattern, size (580 x 440)mm white with integral foot rests, including connection to drain or outgoing pipe and to flushing pipe, antisyphonage pipe joint and to socket or stopper, with and including PVC flush pipe with all fittings etc complete all as specified and as directed.
113	S&F in repair PVC valveless, syphonic action type, flushing cistern (Twin fush type), low level 10 ltr capacity, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed by Engineer-in-Charge.
114	S&F sinks with drainage board made of stainless steel 1mm thick in kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size (915mm x 460mm) bowl size (410mm x 330mm x 160mm) complete all as specified and as directed by Engineer-in-Charge.
115	S&F Kitchen plate rack made of stainless steel 1 mm thick with plugs washers asoverall size (90cm x 90cm) including fixing to wall and all accessories complete all as specified and as directed by Engineer-in-Charge.
116	S&F in repairs 15mm long body bib tap CP fancy type, cast copper alloy with capstan heads screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engineer-in-Charge.
117	S&F CP angle/stop valve of cast copper alloy screwed down, high pressure with capstan heads, screwed both ends for iron pipe or for unions and fixed 15 mm bore complete all as specified and as directed by Engineer-in-Charge.
118	S&F CP angle/stop valve of cast copper alloy screwed down, high pressure with capstan heads, screwed both ends for iron pipe or for unions and fixed 20 mm bore complete all as specified and as directed by Engineer-in-Charge.
119	S&FCP shower roses with CP arms, 15mm bore complete all as specified and as directed by Engineer-in-Charge.
120	S&F shelf of PTMT fixed with and including chromium plated brass screws and wooden/ plastic cleates complete all as specified and as directed. (minimum weight 300gms)
121	S&F brass chromium plated, tubular towel rails 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.
122	S&F 15mm dia brass CP wall mixer for mixing hot & cold water fixed in repairs, complete all as specified and as directed by Engineer-in-Charge.
123	S&F 15mm dia brass CP sink mixer (wall mounted) for mixing hot & cold water complete all as specified and as directed by Engineer-in-Charge.
124	S&F 15mm dia brass CP central hole basin mixer with 450mm braided connection pipe (without pop-up) for mixing hot & cold water complete all as specified and as directed by Engineer-in-Charge.
125	S&F soap dish, brass CP any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed by Engineer-in-Charge.
126	S&F corner glass double shelf with brass CP fancy type frame and brackets of size (250 x 250)mm and 8mm thick of selected quality glass complete all as specified and as directed.
127	S&F 60 cm long glass shelf assembly consisting of 5.50 mm thick glass shelf 12 cm wide with chromium plated bracket guards and railing screws complete all as specified and as directed.
128	Taking down AC/ PVC pipe of any type and description 100/110mm dia including all fittings complete all as specified and as directed.
129	Taking down CI /AC pipe of any type and description 100/110mm dia including all fittings complete all as specified and as directed.
130	Taking downCI / AC pipes of any type and description 75/80 mm dia including all fittings complete all as specified and as directed.
131	S&F 110mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls and floors with and including suitable clamps at one metre of interval including necessary scaffoldingfor (G+2 storeyed) and safety arrangement complete all as specified and as directed.
132	S&F 75mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls and floors with and including suitable clamps at one metre of interval complete all as specified and as directed.
133	S&F PVC (SWR) bends of radius, suitable for 110mm dia PVC pipes fixed complete all as specified and as directed.
134	S&F PVC (SWR) bends of radius, suitable for 75mm dia PVC pipes fixed complete all as specified and as directed.
135	S&FPVC (SWR) junction single, (Single T) equal or unequal in radius 110 mm bore complete all as specified and as directed.
136	S&F 75mm bore cast iron waste and vent pipe in any length with or without ears fixed to wallswith and including suitable clamps after every one mtr of interval with pig lead joints complete all as specified and as directed.
137	Description all as per ser item No. 136.00 above but refixing of old pipes complete all as specified and as directed by Engineer-in-Charge.
138	S&F 100mm bore cast iron waste and vent pipe in any length with or without ears fixed to walls with pig leadjoints with and including suitable clamps after every one mtr of interval complete all as specified and as directed.
139	Description all as per ser item No. 138.00 above but refixing of old pipes complete all as specified and as directed by Engineer-in-Charge.
140	S&F CI 100mm bends with door complete all as specified and as directed by Engineer-in-Charge.
141	S&F CI 100mm single branch piece with door complete all as specified and as directed by Engineer-in-Charge.
142	S&F CI 75mm bends with door complete all as specified and as directed by Engineer-in-Charge.
143	S&F cast iron cowl 100 mm size complete all as specified and as directed by Engineer-in-Charge.
144	S&F in repairs for cast iron Nahani trap / floor trap with CP grating including jointing with pig lead joint to waste pipe of 75mm dia fixed in cement concrete (1:2:4) type B1(using 20mm graded stone aggregates) complete all asspecified and as directed.
145	S&F in repairs for cast iron `P\" or \"S\"trap 100mm bore complete all as specified and as directed by Engineer-in-Charge.
146	S&F in repairs, salt glazed stone ware gulley traps (150mm x 150mm) size square mouthed type ‘P’ including CI cover complete all as specified and as directed.
147	Demolition and breaking up drain pipes (slat glazed ware, AC or reinforced concrete any type) set in cement mortar of 75 / 100 / 150mm internal dia complete all as specified and as directed.
148	M&L for reinforced cement concrete pipes, class NP2, 150 mm bore, laid and jointed complete with collars complete all as specified and as directed by Engineer-in-Charge.
149	M&L for 150mm thick concrete bed to drain pipes in cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and as directed.
150	M&L for PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in surface channel, drain, pillar, posts, coping etc and manholes complete all as specified and as directed.
151	M&L for precast cementconcrete PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) and fixed with CM (1:4) as in landing, cover slab, drain and manhole cover, shelves, troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed by Engineer-in-Charge.
152	S&F mild steel stairs (framed) including stringers, threads, landing, balusters, hand rail, nosing in steps etc. including cleats, brackets, etc. complete all as specified and as directed by Engineer-in-Charge.
153	M&L for in repairs machine cut kota stone slab 18-22 mm thick as in floor /staircase riser & thread (one piece), vertical surfaces/skirting etc, set and jointed with grey cement slurry mixed with pigment to match the shade of slab, size of slabexceeding 0.11 sqm but n. exc. 0.36 sqm including provision of screed bed 15 mm thick in cement mortar (1:4) and a coat of cement slurry @ 3 kg/sqm including rubbing/grindingand bees wax polishing etc complete complete all as specified and as directed by Engineer-in-Charge.Note:-(a) The cost of rounding of edges for thread stair case and necessary raking,circular cutting or notching and waste on stone etc shall be deemed to be included in unit rate.(b) kota stone shall be provided in one piece in each riser & thread.
154	S&F in repairs 25 to 35 mm thick machine cut grinded Dholpur sand stone slab of size not less than 0.30 sqm as infloors /wall etc fixed over 15mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of stone etc complete all as specified and as directed by Engineer-in-charge.
155	Excavation in trenches n exc 1.5m in depth and 1.5m in width and getting out in soft/loose soil complete all as specified and as directed.
156	Surface dressing n. exc 15cm deep and getting out in soft/ loose soil complete all as specified and as directed.
157	Returning, filling in, including spreading, levelling, watering and wellramming in layers not exc 25cm thick in hard/dense soil complete all as specifiedand as directed.
158	Removing excavated material (soil)n. exc 50m and deposited where directed at a level n exc. 1.5m above the strating point complete all as specifiedand as directed.
159	Excavating post holes or similar holes, each not exceeding 0.5 cum, getting out in soft/ loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm thick, watering and removing surplus soil to a distance n. exc 50m & making good surface complete all as specified and as directed.
160	Excavating post holes or similar holes, each not exceeding 0.5 cum, getting out in hard rock/ PQC, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm thick, watering and removing surplus soil to a distance n. exc 50m & making good surface complete all as specified and as directed.
161	M&L for cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in anchorage blocks for hold fast, post and struts complete all as specified and as directed.
162	S&F mild steel work (FE 290 Grade E-165) as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) includingdistance pieces, cleats etc. complete all as specified and as directed.
163	S&F mild steel work rolled section as in main and cross beams, hip and jack, rafter, purlins where connected to common rafters and running rails and guides, fixed with angle cleats or other connecting plates etc conforming to FE 410W (Grade E-250) quality A grade complete all as specified and as directed.
164	M&L for mild steel works (Fe-290 Grade E-165) as in posts and struts etc as in fencing of angle or other sections, including cutting tops to shape as directed, drilling holes, notching for wire etc, complete all as specified and as directed.
165	M&L flat iron fillets as in wind ties for roof including securing bolts / screw etc complete all as specified and as directed.
166	S&F MS steel work in tubular trusses and tubular posts including special shaped washersetc., complete using butt welded tubes conforming to IS 1161- 1979 graded St 240 complete all as specified and as directed.
167	S&F plates (plain or chequered) channels square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed.
168	S&F PPGIpre paintedgalvalume aluminiumzinc coatingGI basedcorrugatedsteel sheet0.50mmthickof ancolourhavingtensilestrengthof 550Mpa as in roof covering/cladding to fix the wall fixed with self taping screws complete all as specified and as directed.
169	S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
170	M&L for washed stone grit plaster (of any colour/ pattern) on exterior walls in two layers, under layer 12mm cement plaster (1:4) (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster (1:1/2:2) (1 cement: 1/2 coarse sand : 2 coloured stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and as directed by Engr-in-Charge. Note:- Payment for providing grooves shall be measured and paid separately.
171	Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge.
172	M&L for providing reinforcement cement concrete(1:2:4) nominal mix type B1 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specifiedand as directed.
173	M&L for RCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in column, struts, pillars etc complete all as specified and as directed.
174	M&L for RCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in raft foundation, beam, plinth beam, footing, roof beam, lintel band etc complete all as specified and as directed.
175	Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings slabs supported on walls, beams, chhajja and columns in floors and similar work; (Horizontal or sloping) not exc 200mm thick complete all as specifiedand as directed.
176	M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
177	S&F5 to 10 mm dia TMT bars, cut to length, bent to shape required, including cranking, bending spirally for hoopingfor columns, hooking ends as in strrrupsand binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.
178	M&L for providing precast cement concrete louvers and jallies 50 mm thick (measured solid) in cement concrete (1:2:4) type B-0 (using 12.5mm graded stone aggregate) and set in cement mortar (1:4) including all mouldings but excluding frame complete all as specified and directed by Engineer-in-Charge.
179	S&F precast cement concrete chequered designer tiles 22 to 25mm thick of size 300mm x 300mm, glossy finish, heavy duty of approved shape and size (Orit Design of mid green or dark green shade) with and including over 15 mm thick screed bed in CM (1:6) including pointing the joints with ready mixed pointing material complete all as specified and as directed by Engineer-in-Charge.
180	S&F glossy finishedmachine pressed precast concrete interlocking paver block approved shape and size, with grey cement and pigment to match, conforming to IS 15658-2006 of 60mm thick M-35 grade with and including laid over 50 mm thick sand cushioning complete all as specified and as directed.
181	M&L for 75 mm thick PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in sub base for floor finishes complete all as specified and as directed.
182	M&L for 100 mm thick PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in sub base for floor finishes complete all as specified and as directed.
183	Demolition of cement concrete or lime concrete (un-reinforced) of any description andin any position not otherwise specifically provided for and removing the debris outside defence land from the site complete all as specified and as directed.
184	M&L for PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.
185	M&L for 100mm thick PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in floor, surface finished even and smooth using extra cement complete all as specified and as directed.
186	M&L for 25mm thick PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in floor, surface finished even and fair without using extra cement complete all as specified and as directed.
187	S&F solid PVC door frame of size (50mm x 47mm) made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.
188	S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC `C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stliles and rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification and drawing complete all as specified and as directed.
189	M&L in repair for MS works as in holdfast, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging holdfasts, grills, cladding and similar small articles conforming to Fe 290 Gde E-165, complete all as specified and as directed.
190	S&F factory made 18mm (+0.7mm) thick celuka PVC board of density 600 kg/cum manufactured by an ISO 900-2008 certified company having one side perlaminated and other side plain fixed as in cabinet/ cupborad shutters including provding manufactures test reportand test certificate is mandatory with each and every supply of material including taking down of existing shutter or any kind of PL board or plyboard completed all as specified and as directed.
191	S&F factory made 18 mm (+0.7mm) thick celuka PVC board of density 600 kg/cum manufactured by an ISO 900-2008 certified company fixed as in shelves perlaminated/ cabinet/cupboard drawers including providing manufacturer\"s test reportand test certificate is mandatory with each and every supply of material including taking down of existing shelves or any kind of PL board or plyboard complete all as specified and as directed.
192	S&F factory made 5 mm thick PVC sheet of density 600 kg/cum manufactured by an ISO 900-2008 certified company, plain 5mm thick PVC sheet panelling for back side (wall side) with and including taking down of existing back side (wall side) or any kind of PL board or plyboard complete all as specified and as directed. Note:- Manufacturer\"s test reportand test certificate is mandatory with each and every supply of material.
193	S&F hasp & staple 100mm size, safety type aluminium anodised with mild steel hinge pin including bolt, two hinge plate and fixed with screws complete all as specified and as directed by Engineer-in-Charge.
194	M&L for 75mmthick PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) as in plinth protections, to be finished even and smooth without using extra cement complete including use and waste of necessary form work complete all as specified and as directed.
195	M&L for preparation of new plasteredsurfaces and applying two coats of cement base paint over a coat of primer on wall complete all as specified and as directed by Engineer-in-Charge.
196	M&L for prepration of old decorated plastered surfaces of walls /ceilings, removal of nails etc & filling cracks/hole by applying cement base wall careputty as required (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying one coat of oil bound distemper white or coloured complete all as specified and as directed by Engineer-in-Charge.
197	M&L for complete removal of existing treatment from old decorated plastered surfaces of walls and ceilingsbyremoval of nails etc & filling cracks/hole with putty as required(multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coats of oil bound distemper white or colouredby rollercomplete all as specified and as directed by Engineer-in-Charge.
198	M&L for applying 2mm thick cement base wall care putty on wall / ceilings, etc complete all as specified & directed by Engineer-in-Charge.
199	M&L for salt-glazed stone ware drain pipes, internal dia of pipe 150mm laid in trenches and jointed complete all as specified & directed by Engineer-in-Charge.
200	S&FVitreous china wash down water closet pan “Pedestal Pattern” colouredwith WCseat cover coloured, closed pattern with flat bottom and mild steel chromium plated or aluminized hinging device including PVC flush pipe and joints etc and connection to drain, flushing pipe, anti-syphonagepipe, and fixing arrangements with fixing bolts CPHealth Faucet with 1.5 mtr tube & Hook of selected etc complete all as specified and as directed.
201	S&F vitreous china wash hand basin coloured of oval tiffany shape minimum of size 550mm x 400mm, bottle trap chromium plated heavy duty 32 mm dia, PVC connection of 15mm dia & 450mm long with PTMT nuts, 15mm bore basin mixer long swan neck cast copper alloy chromium plated high pressure and 32mm dia CP brass waste fitting complete all as specified and as directed.
202	S&F 15 mm bore CP concealed stop cock long shank and long threading chromium plated of screwed down to iron pipes, high pressure complete all as specified and as directed.
203	S&F 15mm bore cast copper alloy CP angular valve (fancy type), screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and as directed.
204	M&L for Durastone vitrified coloured tiles, light shade 10mm thick, area of each tile exc 0.06 sqm but n exc 0.36 sqm as in floor, set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the colour of the tiles, over and including 15mm thick screed of cement mortar (1:6) complete all as specified and as directed.
205	S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders framed, balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe-410-0 or Fe 310-0 and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
206	M&L for hardcore gauge n.exc 63mm of broken stone or boulders deposited, spread and levelled in layers n.exc 75mm thick, watered and well rammed to a true surface complete all as specified and as directed.
207	M&L for brick works with sub class ‘B’ bricks old size in one brick thick honey comb walling built in CM (1:4) complete all as specified and directed.
208	Use and waste of form work (fair finished) toflat sides of concrete foundations, footings, bases of columns, raft and raft beams, side and soffits of foundations, plinth beams, roof beam, lintel bend, shelvesand similar works vertical or to batter and fair finishing complete in all as specified and as directed.
209	Use and waste of form work to fair finished concrete flat surfaces of sides of pillars post columnscomplete all as specified and as directed.
210	S&F 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed.
211	S&F 75mm size PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.
212	S&F concealed cistern tank with ceramic wall hang/wall mounted designer water closet toilet seat withseat cover of any shape and size complete all as specified and as directed.
213	S&F in repairs vitreous china counter top basin with single faucet hole of any shape and colourexcluding taps waste chain and porcelain stopper but including iron brackets, cutting for pinning in ends of brackets or erecting stand, but exclusive of fixing of supply and waste pipe fixed complete all as specified and as directed.
214	S&F in repair wall mounted urinal with automatic concealed urinal flusher sensor of any shape and size complete with all accessary and fittings complete all as specified and as directed.
215	S&F urinal glass partition of size ( 900mm x 450mm x 8 to12mm thick) with bracket complete with all accessary fittings complete all as specified and as directed.
216	S&F in repairs fixing single-control basin mixer in polished chrome with CP copper connecting pipe 15mm dia chromium plated screwed down, screwed for iron pipe and fixed complete all as specified and as directed.
217	S&F in repair bottle trap in polished chrome (Generic) type for WHB including inlet, outlet and union cap etc. 32mm bore complete all as specified and as directed.
218	S&F in repairsforefront mirror 900mm x 600mm of selected quality glass, frame less bevelled edge mirror fixed with steel studas per direction complete all as specified and as directed.
219	S&F in repair toilet paper holder chrome with cover in french gold fixed in position complete all as specified and as directed.
220	S&FCruz Liquid Soap Dispenser complete all as specified and as directed.
221	S&F in repairs(Single) angular concealed stop valves trim in polished chrome high pressure fancy type screwed both ends iron pipe or for unions and fixed 15mm bore etc. complete all as specified and as directed.
222	S&F in repair CP towel racks with lower hanger complete all as specified and as directed.Make-AHS-1581 of Jaquar or equivelent as per list of makes.
223	S&F wash hand basins, vitreous china of size 550mm x 400mm (flat back or angle back type), including cutting for and pinning in ends of brackets over new angle iron erecting stand embedded in PCC (1:2:4) block including 32mm dia bore waste fitings cast copper alloy chromium plated with long screwed shanks and flynuts flange and bedded in red lead cement,PVC waste pipe including 15mm bore dia fancy type CP finish Pillar tap, cast copper alloy with capstan heads, screwed down high presuure, with or without lettered hot or cold with long screwed shanks and fly nuts, screwed for iron/CPVC pipe/fittings complete all as specified and as directed.
224	Dismantling boarding any size or description, fixed in any position or in any thickness, including cover fillets with nails complete all as specified and as directed.
225	S&F 20mm ball brass valves high pressure with polythene float and flynut complete all as specified and as directed by Engr-in charge.
226	S&F health faucet with double lock 1 metre brass plated stainless flexible hose wall hook complete all as specified and as directed by Engr-in charge.
227	Takingdown of existing tarfeltand cement plaster of anydescription and thicknesson rooftopincluding flashing andjunctionof parapetandcleaning existingroof topsurfaceby brooming, wirebrushingincluding removed to out side of MoD land complete all as specified and as directed.
228	Taking down unservesiable sub main wiring with conduits/battens etc complete all as specified and as directed.
229	Taking down carefully unserviceable copper/aluminium point wiring(light, fan, socket or power) complete including fixture and fitting such as switches, ceiling rose, lamp holder, regulators, sockets, light fittings, wooden terminal boxes, plastic laminated sheet cover,including taking down of DB’s, meter board any type complete all as specified and as directed.
230	Material and labour for point wiring with single core PVC sheathed 1100 volt grade cable with multi stranded copper conductor of size 1.5 sqmm FRLSH (Nominal area) drawn through non metallic rigid PVC conduit medium duty ISI markednot less than 20mm dia, with GI saddles GI screws, rawl plugs (concealed conduit/surface wiring in walls or roof ) including Tee, Junction boxes andproper fixing of modular switches sockets and regulators and drawing continuous earth wire with and including PVC sheathed 1100 Volts grade cable with strandedcopper conductor of size 1.5 sqmm (nominal area) FRLSH and connected to main earth dolly complete for following all as specified and directed by Engr-in-Charge:- (a) One light point controlled by one switch one way
231	(b)One fan/exhaust fan point controlled by one switch
232	(c ) One 3 pin 5 Amps socket out let point on the same board controlled by one switch complete.
233	(d) One socket outlet 5 Amp controlled by one switch on independent board.
234	(e ) One bell point controlled by one push button switch
235	Description all as per Srl item No 230.00 here-in-before but for one power point 6 pin 15 Amps socket out let with 2.5 sqmm stranded copper conductor cable PVC insulated FRLSH including earth wire 2.5 sqmm copper FRLSH conductor cable connected to earth dolly complete all as specified and as directed.
236	S&F switch modular colourful white / black / golden etc 1 way 6 amps suitable for 240 volt AC complete all as specified and as directed by Engineer-in-Charge.
237	S&F socket modular 6 amps 2/3 pin combined 2 module suitable for 240 volt AC complete all as specified and as directed by Engineer-in-Charge.
238	S&F socket modular 6/16 amps 2/3 pin combined 2 module suitable for 240 volt AC complete all as specified and as directed by Engineer-in-Charge.
239	S&F switch modular 1 way 16 amps suitable for 240 volt AC complete all as specified and as directed by Engineer-in-Charge.
240	Supply and fixing of electric ding dong bell, 230 volt AC, single pole, complete all as specified and as directed by Engr-in-Charge.
241	Supply and fixing for modular type bell push, 5 Amp complete all as specified and directed by Engr-in-Charge.
242	S&F modular colourful white/ golden / cream / wooden etc cover plate with frame 6 module complete all as specified and directed by Engr in charge.
243	S&F modular colourful white/ golden / cream / wooden etc cover plate with frame 4 module complete all as specified and directed by Engr in charge.
244	S&F modular colourful white/ golden / cream / wooden etc cover plate with frame 2 module complete all as specified and directed by Engr in charge.
245	S&F modular colourful white/ golden / cream / wooden etc cover plate with frame 3 module complete all as specified and directed by Engr in charge.
246	S&F modular colourful white/ golden / cream / wooden etc cover plate with frame 1 module complete all as specified and directed by Engr in charge.
247	S&F modular colourful white/ golden / cream / wooden etc cover plate with frame 8 module complete all as specified and directed by Engr in charge.
248	S&F modular metal flash box for 4 module complete all as specified and as directed by Engr in charge.
249	S&F modular metal flash box for 2 module complete all as specified and as directed by Engr in charge.
250	S&F modular metal flash box for 6 module complete all as specified and as directed by Engr in charge.
251	S&F modular metal flash box for 8 module complete all as specified and as directed by Engr in charge.
252	Supply and fixing for ceiling rose, surface type, 65mm x 50mm, 2 to 3 terminal complete all as specified and as directed by Engr-in-Charge.
253	Supply and fixing for lamp holder, PVC/polycarbonate type, insulated body with back plate of batten fitting with and including LED bulb 9 watt complete all as specified and as directed by Engr-in-Charge.
254	S&F in replacement of 20W LED battens with battery backup (inverter compatible) 4 feet cool day light 6500K, energy efficient, 0.9 P.fcomplete with all accessories internally pre wired and including connecting up with three corecopper conductor cable completeall as specified and directed by Engr-in-Charge.
255	S&F indoor decorative LED Battens integrated type 20 watt 4 feet white 6500K fixture complete with all accessories internally pre wired and including connecting up with twin corecopper conductor cable completeall as specified and as directed by Engr-in-Charge.
256	Supply and fixing of 9 W B22 CDL with 900 Lumens in normal mode and around 350 Lumens in power backup mode with charging time of ( 8 - 10 ) hours & power backup of around 4 hours fixed in pendent holder completeall as specified and directed by Engr-in-Charge.Make:- Havells/Halonix/Philips
257	S&F environment friendly indoor decorative 20 watt LED for wall mounted 20 watt LED batten extruded aluminium heat sink provided for heat dissipation and integrated driver back plate suitable for batten fittings completeall as specified and as directed by Engr-in-Charge.
258	S&F environment friendly indoor decorative mirror LED light fittings 1 x 10 watt with opal diffuser including all accessories suitable for batten fittings complete all as specified and as directed.
259	S&F decorative LED wall bracket light fitting, wall mounting, champagne gold finish fixture with plastic body suitable for B-22 base including one No 12 wattLEDbulb colour warm white/cool white complete all as specified and as directed. Make:- Havells Cat part no. LHFOECE1TZ1B014 or equivalent in make Halonix / C&S / Philips.
260	Supply and fixingLED luminaire 600mm x 600mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp colour warm white/cool white suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. Make:- Bajaj, Philips, Crompton & Havells
261	Supply and fixing sheet metal enclosure for distribution board SPN (when MCBs to be used ) 8 way double door, 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified and as directed by Engr-in-Charge.
262	Supply and fixing sheet metal enclosure for distribution board SPN (when MCBs to be used ) 4 way double door, 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified and as directed by Engr-in-Charge.
263	Supply and fixing vertical type load line distribution board, double door, 4 way, AC, 3 Phase, 415 volts ,TPN, bus bar 200 Amps rating and earth bus & din rail suitable for MCCB as incomer complete all as specified and as directed by Engr-in-Charge.
264	Supply and fixing MCCB,4 Pole 125 Amp, 16 kA complete all as specified and as directed by Engr-in-Charge.
265	Supply and fixing MCB, SPN, 63 Amp, 10 kA complete all as specified and as directed by Engr-in-Charge.
266	Supply and fixing MCB, SPN, 40Amp, 10 kA complete all as specified and as directed by Engr-in-Charge.
267	Supply and fixing MCB, SP, 6-40 Amp, 10 kA complete all as specified and as directed by Engr-in-Charge.
268	S&Fbuilding security light of 30 watt capacity fitting with in-built daylight sensor automatically ON/OFF in the absence/presence of sunlight for road lighting, having secondary optics with uniform distribution of light. Pressure die cast aluminium housing powder coated in grey and toughened glass for better aesthetics, IP 66 protection, IK08 with operating voltage 120 to 270 V 110 Lum/W complete all as specified and directed. Make:- Eveready/Wipro/Philips
269	M&L for GI pipe light grade 40mm dia iron bracket to make shape L type (Min 1.50 mtr) for street light fitting complete all as specified and as directed.
270	M&L of MS flat clamps of size 30mm x 5mm thick including suitable size of nuts, bolts and washers for street light bracket fitting of size 40 mm GI bracket on wall complete all as specified and as directed.
271	Supply and fixing in replacement ofsheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB 20 amps complete all as specified and as directed by Engr-in-Charge.
272	S&F 5 Litre instant water heater (Geyser) with rust and shock proof body and anti corrosive stainless steel inner tank and heating element upto 3 KW with ISI Marked, star rated, fire retardant power cord of suitable capacity 3 core upto 1.5 mtr length with top and bi colour LED Indicator alongwith hot and cold water PVC pipe for connection including warranty upto 5 year on inner tank & 2 years rest of the parts complete all as specified and as directed by Engr in charge.
273	Supply and fixing electric water heater, storage type ABS body type with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc including steel braided flexible connection for pipe of size 15mm bore with GI hexagonal adopters/Nuts on both sides for inlet (cold water supply) and out let (hot water supply), provision of wall mounting arrangement, mounted on wall with suitable size of anchor bolts, making connection including testing complete all as specified and as directed.
274	M & L for in replacement submain wiring with two run of 6 sqmm singlecore PVC insulated butunsheathed FRLS cable of specified size of multistranded copper conductor 1100 volts gradeIS:694 marked and one run of 6 sqmm PVC insulated butunsheathed FRLS cable for earth continuty conductordrawn through and under suitable size of rigid non metallic PVC conduit , medium grade, ISI marked ( not less than 20 mm dia) complete with all acessories and fittingsall laid/fixed concealed in wall/ceiling or surface in wall and surface conduit on ceiling, and also include the specified runs of specified size earth continuityconductorof similar type cable complete all as specified. Note: 2 Runs of 6 Sqmm singlecoreand one run of 6 sqmm single core cable shall be measured 1 RM.
275	M&L in replacement submain wiring with two run of 4 sqmm singlecore PVC insulated butunsheathed FRLS cable of specified size of multistranded copper conductor 1100 volts gradeIS:694 marked and one run of 4 sqmm PVC insulated butunsheathed FRLS cable for earth continuity conductor drawn through and under suitable size of rigid non metallic PVC conduit, medium grade, ISI marked ( not less than 20 mm dia) complete with all acessories and fittingsall laid/fixed concealed in wall/ceiling or surface in wall and surface conduit on ceiling, and also include the specified runs of specified size earth continuityconductorof similar type cable complete all as specified. Note:- 2 Runs of 4 Sqmm singlecoreand one run of 4 sqmm single core cable shall be measured 1 RM.
276	M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 metres below ground level connected to galvanized earth wire 4.00 mm diaby means of nuts, bolts, thimbles, check nuts, washers of GI or steel,PCC (concrete chamber of size 300mm x 300mm x 300mm inside dimension) shall be PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) with fair finish, internal surface of concrete chamber shall be given 15mm thick plaster in CM (1:4), funnel with wire gauge of 22 gauge, 8 mesh per liner inch, 80 mm thick PCC pit cover of size 320mm x 320mm of RCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) reinforced with XPM, JALLI and charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) and specified includingprovision of earth wire protected by 15mm dia medium grade GI pipe and watering GI pipe shall be 20mm bore medium grade etc complete, all excavation and earth work & connecting the earthing to an earthing test point main switch board as specified and testing on completion complete all as specified & as directed by Engr-in-Charge.
277	Taking down ceiling fans of any sweep and any size including cable connectionsand disconnecting of fan bladesand removing the fan with blades and deposit to MES store yard complete all as specified and as directed by Engr-in-charge.
278	Supply and fixing ceiling fans complete with blades, down rods, fan regulator suitable for BLDC fan and accessories, 230 V, 1200 mm sweep, min air delivery 210 CFM with service value 6 BEE and five star rated with brushless direct current motor (BLDC) including provision of PVC flexible copper conductor wire of size 23/0.0076 three core from ceiling rose tofan upto 1 mtr length for giving connection complete all as specified and as directed.
279	S&F exhaust fan with steel body heavy duty with louvers complete of sweep size 300mm, 900 RPM, copper winding single phase motor, with nuts, bolts and washers, size of the bolt 15 cm long 12mm dia embedded in the wall including provision of PVC flexible copper conductor wire of size 23/0.0076 three core from ceiling rose to exhaust fan upto 1.5 mtr length for giving connection alongwith old unserviceable exhaust fan deposited to MES store yard complete all as specified and as directed. Make:- Crompton/Bajaj/Orient/Havells
280	S&F PVC ventilation fan with louvers shutter of sweep size 230/250mm, single phase, embeded in the wall/window including provision of PVC flexible copper conductor wire of size 23/0.0076 three core from ceiling rose to exhaust fan upto 1.5 mtr length for giving connection alongwith provision for mosquito jali on wall complete all as specified and as directed.
281	M&L for cutting holes in wall for fixing exhaust/ventilation fans of size upto 300mm size and making good the disturbed surfaces with (1:4) cement mortar 15mm thick plaster smooth finishing of holes and grouting nuts for fixing of exhaust/ventilation fans complete all as specified and as directed.

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Delhi Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Additional / Alternator To Bldg No. P-24 At Domestic Area In Mcc, Additional / Alternator To Sncos Living In Accn, Additional / Alternator To Certain Toilets In Rock View Area And Provn Of Hard Stand Platform Grouting At Af Stn Palam Under Ge (, Palam-Delhi

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Additional / Alternator To Bldg No. P-24 At Domestic Area In Mcc, Additional / Alternator To Sncos Living In Accn, Additional / Alternator To Certain Toilets In Rock View Area And Provn Of Hard Stand Platform Grouting At Af Stn Palam Under Ge (, Palam-Delhi

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us