|
| 1 | Taking down chowkhats or framewith shuters (without takingshutter from frame)exc 1.5 sqm and n. exc 4.0 sqmand removing from site |
| 2 | Taking down chowkhats or frames not exc 1.5 sqm with shutter (without taking of shutter from the frames) includinghold fasts and PCCblock. |
| 3 | M&L II ndClass teak wood Plain, solid, straight chowkats an frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinnedat joints. |
| 4 | S & F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face prelaminated decorataves panels, commercial type on both sides complete all as specified. |
| 5 | S & F 35 mm thick II class HW Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered orrounded. fitted with cut and mitred beads for securing glass, etc.; as per section 8.28 (a) sizes of me-mbers of shutters as specified . |
| 6 | S & F Solid PVC Door Frame of size 50 mm x47mm made out of 5 mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed. |
| 7 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either sides and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rail with suitable PVC sheet beading and jointed together the solvent cement supplying & fixing in the frame at site as per specification and drawings complete. |
| 8 | S & F for Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed including takig down old un servicable one. |
| 9 | M&L 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane |
| 10 | M&L 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in squareexc 0.5 sq. m in each pane |
| 11 | M&L 5 mm Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane |
| 12 | M&L Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane |
| 13 | S&F Stainless Steel 75 mmButt Hinges grade 304, fixed to chowkhat all as specified and as directed by Engineer-In-Charge. |
| 14 | S&F Stainless Steel 100 mmButt Hinges grade 304, fixed to chowkhat all as specified and as directed by Engineer-In-Charge. |
| 15 | S & F Stainless Steel Tower Bolt 150 mm long grade 304 all as specified and as directed by Engineer-In-Charge. |
| 16 | S&F 250 mm size Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete. |
| 17 | M&L Preparation of new wooden surface of any description not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over pink primeincludingpreparation of new wooden surface all as directed and as specified |
| 18 | Supply fabricate & fix in position anodised aluminium powder coated (minimum thickness of powder coating 50 micron) three track window ( two shutters glazed & one shutter wire gauge) with frame, glazed with 5 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing of Member for wire gauge Section shall be 18.00 x 25.00 x 1.35 (Section No 20791). position, concelled type lock for all three shutter, PVC roller etc all as specified below, including taking down old window and making good jambs, cill, ceiling with 10mm thick plaster in CM (1:4) and applying two coat of Oil bound distumper over a coat of wall care putty complete all as specified and directed including taking down old unservicable one(a) Frame (top & side) section shall of size 92.00 x 31.75 x 1.20 mm ( Section No 21447)(b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.20 mm ( Section No 21446)(c) Top & side Members of shutter Section shall beof size 18.00 x 40.00 x 1.19 (Section No 21455)(d) Shutter Interlock Section shall be of size 18.00 x 40.00 x 1.19 (Section No 21454)(e) Bottom Members of shutter Section shall beof size 18.00 x 40.00 x 1.29 (Section No 20844). Make Jindal/Hindalco/Nalco |
| 19 | S&F aluminium ventilator (powder coated with approved colour)partialy glazed and partialy louvers, outer frame & mullionfabricated with aluminium section of size 82.50 mm x 38.00 mm x 1.20 mm thick, half portion glazed with 4 mm thick frosted glass including rubber beading, & glazing clip, half portion louvers of 80 mm wide & 4 mm thick frosted glass including aluminium louver patti including S.S wire gauge of fixing of 0.36mm dia and 1.40 width of aparture with 25x3mm think aluminium strip with screw to upper half portion of ventilator all fitting & fixture and fixed in position including taking down old ventilator complete all as specified and directed including taking down old unservicable one |
| 20 | M&L Demolition ofBlock Masonry wall built in cement mortar or cement lime mortar ashlar facings,dressed stonework, precast concrete articles andprecastconcrete block walling. |
| 21 | M &L Pre-cast cement concrete block masonry set in CM Mortarwith solid blocks, exc. 10 cm in width and setting in mortar, complete |
| 22 | M&L for plastering 15mm thick in CM 1:6 on brick or stone walls to be finished even and smooth (without using extra lime or cement) all as specified and directed . |
| 23 | Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, Including removal of debries out side MD land all specified and directed. |
| 24 | M/L cement plaster 5mm thick in CM 1:3 on concrete surface as on ceilling finished even and smooth without using extra cement complete all as specified. |
| 25 | M/L Providing precast cement concretesolid building blocks orslabs 10cm thick (with plain or interlocking jointsasdirected) setting in mortar,complete, in walls (Type C1 1:3:6 (20mm graded aggregate)Set in cement mortar 1:6 ) |
| 26 | M & L for preparation of new plastered/concrete surfaces of walls, providing 3 mm thickBirla white wall care putty in 2 coats to achieve smooth surfaces and applying two coats ofdistemper oil emulsion of approved shade/tint with make Asian royal Series and equalent over a coat of compatiable priming paint complete all as specified. |
| 27 | M & L Preparation of new ceiling surfacesincluding washing, rubbing down and stopping by brooming down, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats ofoil distemper emulsion on wall surfaces over one coat of primer over 3 mm thickBirla white wall care putty in 2 coats to achieve smooth surfaces complete all as specified. |
| 28 | M & L for preparation of new plastered/concrete surfaces of walls, providing 3 mm thickBirla white wall care putty in 2 coats to achieve smooth surfaces and applying two coats ofexterior grade acrylic emulsion paintof approved shade/tint with make Asian Apex Series and equalent over a coat of compatiable priming paint complete all as specified. |
| 29 | M & L Preparation of old distempered and paintedsurfaces including washing, rubbing down and stopping by brooming down , scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats ofoil distemper emulsion on wall surfaces over one coat of primer over 3 mm thickBirla white wall care putty in 2 coats to achieve smooth surfaces complete all as specified. |
| 30 | M&L preparation of existing treatment of old surface including brooming down , scrapping down smoke soot,mould, moss and efforescent salts and trading oil and grease spouts and cleaning with water on wall applying one coats of Acrylic emulsion (exterior weather coat) paint of any tint as approved complete all as specified and as directed by Engineer-in-Charge. |
| 31 | Grinding the existing paint or putty from the wall using a mechanical grinder orwire brush. Remove all loose and deleterious matter and dust. Fill the crackswith Fosroc PU 50 Sealent. Provide and apply two coats of Fosroc NitoproofDamprotect, a high-performance two-component elastomeric cementitiousdamp-proof coating. |
| 32 | Dismantling og Plain or corrugated steelany gauge, thickness, including Nainital or similar pattern roof covering |
| 33 | S&F pre-colour coated high tensile strength galvalume sheet roofing with yield strength (550 NPA) prepainted with aluminium (55%) and zinc (45%) alloy coating applied through continous hot dip process having tatal coated thickness (TCT) of 0.50mm with minimum coating mass on both sides @ 150gms/sqm in length and width as per site condition fixed with complete acessories as per manufacturer\"s instructions through specialist agency and as per profile and shade as approved by GE. |
| 34 | Pre-painted galvalume aluminum zinc coating GI based Plain sheet roofing with yield strength (550 NPA) prepainted with aluminium (55%) and zinc (45%) alloy coating applied through continous hot dip process having tatal coated thickness (TCT) of 0.50mm with minimum coating mass on both sides @ 150gms/sqm in length and width as per site condition fixed with complete acessories as per manufacturer\"s instructions through |
| 35 | M&L for preparation of old painted of steel or iron surfaces of any description not otherwise described over 10cm width or girth and applying one coat of Synthetic enamel paint complete all as specified. |
| 36 | M&L Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161 1979 grade St.-240 |
| 37 | M&L for preparation of new painted of steel or iron surfaces of any description not otherwise described over 10cm width or girth and applying two coat of Synthetic enamel paint over one coat of red oxide primer complete all as specified. |
| 38 | Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish of the premises all as specified |
| 39 | Demolition of Concrete of any description as in anypositionnot otherwisespecifically provided for all as Specified. |
| 40 | Material and labour for providing plain cement concrete 1:2:4 mix type B0, using 12.5mm graded stone aggregate as in under layer to flooring 25mm thick finished rough to reiceve toping complete all as specified and as directed. |
| 41 | Providing and laying polished vitrified ceramic floor tiles, 8-10 mm thick, with area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm, of approved shade, colour, and pattern (pattern consisting of combination of two or more tiles), conforming to IS 15622 with water absorption less than 0.08%, fixed using approved tile adhesive as per manufacturer’s specifications, with joints maintained using spacers and filled with compatible epoxy-based grout to match the tile colour, laid over and including 15 mm thick screed bed in cement mortar 1:6 (1 cement : 6 coarse sand), complete all as specified and directed by the Engineer-in-Charge. The colour, shade, and pattern shall be approved by the Engineer-in-Charge during execution of work. No extra cost shall be allowed for removing and re-fixing doors, necessary cutting, or wastage, if required during execution of work. |
| 42 | M&L forhigh-quality non skidvetrified tiles exc 0 .36 Sqm not exc 1.0 Sqm of Make Somany or Equevalent , minimum 7-8 mm thick, conforming to IS 15622:2006 using polymer-modified cementitious adhesive (IS 15477:2019) and water-resistant, anti-fungal cement-based or epoxy grout (IS 14490:2018) with 1.5-3 mm joint widths as per approved samples and layout patterns.Method of installation:- 1. do cement plaster (1:4 ratio) to achieve a smooth and plumb surface over which apply adhesive as per manufacturer’s recommendations evenly to the wall surface and back of tilesto ensure full coverage and avoid hollow spots 2. Press tiles firmly into the adhesive, using plastic spacers to maintain consistent joint widths. Ensure tiles are level and flush with adjacent tiles4.Allow adhesive to set for 24-48 hours before grouting,5. Apply grout using a rubber float, ensuring all joints are fully filled andremove excess grout from tile surfaces using a damp sponge during application.Allow grout to cure for 24-72 hours, 5.Apply silicone sealant at corners, edges, and junctions with fixtures to prevent water ingress complete all as specified and as directed.Note:- Rate shall beinclusive of all the items mentioned in this Item |
| 43 | M&L forhigh-quality glazed vetrified/ceramic tiles exc 0 .36 Sqm not exc 1.0 Sqm of Make Somany or Equevalent , minimum 7-8 mm thick, conforming to IS 15622:2006using polymer-modified cementitious adhesive (IS 15477:2019) and water-resistant, anti-fungal cement-based or epoxy grout (IS 14490:2018) with 1.5-3 mm joint widths as per approved samples and layout patterns as in walls.Method of installation:- 1. do cement plaster (1:4 ratio) to achieve a smooth and plumb surface over which apply adhesive as per manufacturer’s recommendations evenly to the wall surface and back of tilesto ensure full coverage and avoid hollow spots 2. Press tiles firmly into the adhesive, using plastic spacers to maintain consistent joint widths. Ensure tiles are level and flush with adjacent tiles4.Allow adhesive to set for 24-48 hours before grouting,5. Apply grout using a rubber float, ensuring all joints are fully filled andremove excess grout from tile surfaces using a damp sponge during application.Allow grout to cure for 24-72 hours, 5.Apply silicone sealant at corners, edges, and junctions with fixtures to prevent water ingress complete all as specified and as directed.Note:- Rate shall beinclusive of all the items mentioned in this Item |
| 44 | M&L for 75 mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in plinth protection, paving including finishing the surface even and fair complete. |
| 45 | Demolition of cement concrete in ground floors and paving ( reinforced) n exc. 15 cm. thicknesses, below or above ground level, complete all as specified. |
| 46 | Supply and Fixing of a wall-mounted mirror measuring 0.60 m (width) x 0.90 m (height). The mirror shall be made of high-quality, clear, distortion-free float glass with a minimum thickness of 5 mm, featuring polished edges for safety. The mirror shall be fixed securely to the wall using appropriate mounting hardware, ensuring level installation and compliance with relevant standards. All materials and workmanship shall conform to approved specifications and site requirements |
| 47 | Supply and Fixingof a rimless wall-hung European Water Closet (EWC) with dimensions 515 mm (length) x 360 mm (width) x 370 mm (height), equivalent to CERA Cat. No. A1044111 or approved equivalent. The EWC shall be made of high-quality vitreous china with a glossy finish, featuring a rimless design for enhanced hygiene and ease of cleaning. It shall include a concealed P-trap for improved aesthetics and efficient waste removal. The toilet shall be equipped with a Duroplast slim soft-close seat cover to ensure quiet and gentle closure, preventing slamming and enhancing durability. The EWC shall incorporate a water-saving dual flush system and all other connected items including Concealed cistern knobs equelent to Cat no B1120101RG. The installation shall include a concealed cistern and all necessary mounting hardware, ensuring secure wall fixation at a standard height of 38-48 cm from the floor to the top of the bowl, as per approved site requirements. All materials and workmanship shall comply with relevant standards and specifications, with the product sourced from CERA or an equivalent reputed manufacturer, subject to approval by the engineer-in-charge.Note : Rates include all materials including concealed Flushing cisterna and connected items |
| 48 | Supply and Fixing of a table-top wash basin equivalent to CERA Cat. No. S2020175 RG or approved equivalent. The wash basin shall be made of premium-grade vitreous china with a glossy finish, designed to sit on a countertop, offering a modern and stylish aesthetic. The basin shall feature a rectangular shape with dimensions approximately 600 mm (length) x 450 mm (width) x 150 mm (height), subject to manufacturer specifications. It shall include a thin-rim design for easy cleaning and enhanced hygiene, with anti-splash features and efficient water-holding capacity. The basin shall be finished in a snow-white or equivalent color for a clean, elegant look. The scope includes supply and installation with necessary fittings, including a compatible waste coupling and tap hole provision (if applicable), ensuring secure placement on the countertop. All materials and workmanship shall conform to relevant standards and specifications, with the product sourced from CERA or an equivalent reputed manufacturer, subject to approval by the engineer-in-charge. |
| 49 | Supply and Fixing of a pillar tap equivalent to CERA Cat. No. F1005452AC or approved equivalent.The tap shall feature a single-lever or quarter-turn operation for smooth and precise control of water flow and temperature. It shall have a height and spout length suitable for table-top wash basins, providing adequate clearance for user convenience. The installation shall include all necessary fittings, such as flexible hoses, mounting nuts, and gaskets, ensuring a secure and leak-proof connection to the water supply. The pillar tap shall comply with relevant standards for plumbing fixtures, with materials and workmanship sourced from CERA or an equivalent reputed manufacturer, subject to approval by the engineer-in-charge. |
| 50 | Supply and FIXING of a set of stop cocks, comprising an exposed part equivalent to CERA Cat. No. F1005351AC and a concealed part equivalent to CERA Cat. No. F4050502, or approved equivalent. The stop cock set shall be cantique copper finish. The exposed part shall feature a quarter-turn operation with a ceramic disc cartridge for smooth and reliable control of water flow. The concealed part shall be designed for in-wall installation, providing a robust and leak-proof connection to the plumbing system, with compatibility for standard pipe sizes (15 mm or as specified). The stop cock set shall be suitable for high-pressure water systems and include all necessary components for installation, such as mounting hardware, gaskets, and seals, ensuring a secure and watertight fit. The design shall allow for easy maintenance and access to the concealed valve. All materials and workmanship shall comply with relevant plumbing standards, with the product sourced from CERA or an equivalent reputed manufacturer, subject to approval by the engineer-in-charge. |
| 51 | Supply and fFixing of a wall-mounted single lever basin mixer, Cera Ruby Series or equivalent, comprising an exposed part (Cat. No. F1005473 AC) with a single lever handle, spout, and chrome-plated wall flange, and a concealed part (Cat. No. F4065101 AC) with a 35 mm ceramic cartridge for smooth, leak-proof operation. Constructed from high-quality brass with a polished chrome (AC - Anti-Corrosion) finish, the mixer ensures durability, corrosion resistance, and a modern aesthetic suitable for residential or commercial bathrooms. It features a water-efficient design with WEP-I Green certification, precise hot and cold water mixing, and compatibility with standard basins, with equivalent products from brands like Jaquar, Hindware, or Parryware meeting similar specifications in material, finish, and performance, compliant with ISI standards, and backed by a standard manufacturer warranty. |
| 52 | Supply and Fixing of a high flow single lever concealed diverter, Cera Ruby Series or equivalent, comprising an exposed part (Cat. No. F1005721AC) with a single lever handle and chrome-plated wall flange, and a concealed part (Cat. No. F4030101AC) featuring a 35 mm ceramic cartridge for smooth, leak-proof operation and precise control of water flow and temperature. Constructed from high-quality brass with a polished chrome (AC - Anti-Corrosion) finish, this diverter ensures compatibility with standard shower systems, with equivalent products from reputable brands like Jaquar, Hindware, or Parryware meeting similar specifications in material, finish, and performance, adhering to ISI standards, and backed by a standard manufacturer warranty. all as specified and as directed by engineering charge |
| 53 | Supply and Fixing of a bib cock with wall flange and aerator, Cera Ruby Series or equivalent (Cat. No. F1005151AC),equivalent products from reputable brands like Jaquar, Hindware, or Parryware meeting similar specifications in material, finish, and water-saving features, backed by a standard manufacturer warranty. |
| 54 | Providing and fixing CERA Soap Dish, Cat No: F5013106RG or equelent The unit shall be wall-mounted using approved fasteners and installed as per manufacturer’s specifications. Rate to include supply, transportation, handling, installation, and all incidental works complete in all respects. |
| 55 | Providing and fixing CERA Towel Ring, Cat No: F5013105RG, or equelent constructed from high-quality brass with corrosion-resistant coating. The item shall be fixed to the wall securely with concealed screws and aligned for aesthetic consistency. Rate to include all materials, labor, and fittings complete. |
| 56 | Providing and fixing CERA Towel Rail of 600 mm length, Cat No: F5013103RG, or eqelent The rail shall be mounted horizontally on the wall using suitable fixtures and aligned properly. Rate includes supply, installation, and all associated accessories and labor. |
| 57 | Providing and fixing CERA Toilet Paper Holder, Cat No: F5013110RG, or equelent. The holder shall be wall-mounted with concealed fittings and installed as per design layout. Rate includes all materials, labor, and installation complete. |
| 58 | Providing and fixing CERA Liquid Soap Dispenser, Cat No: F5001111RG, or equelent, designed for wall mounting and constructed from high-quality brass and glass/acrylic components. The dispenser shall be securely fixed and tested for proper function. Rate includes supply, installation, and all necessary fittings. |
| 59 | Providing and fixing CERA Health Faucet, Cat No: F8035101Gor equelent, including flexible hose and wall hook. The unit shall be connected to the water supply line and tested for leak-free operation. Rate includes all plumbing connections, accessories, and labor complete. |
| 60 | Providing and fixing CERA Overhead Shower, Cat No: F7010112RG ,or equelent The shower shall be installed at designated height with proper alignment and connected to the water supply system. Rate includes all materials, fittings, and installation complete. |
| 61 | Taking up or down PVC tubing and connections,including cleaning for re fixing or removal to store |
| 62 | Supply and fix of CPVC Pipes20 mm dia including all necessary fittings on walls/ceiling or laying in floorscomplete all as specified |
| 63 | Providing and laying ferrocement slab including preparation of surface, fabrication of skeletal framework using mild steel bars (6 mm to 10 mm dia) spaced appropriately, and fixing multiple layers of galvanized wire mesh (typically 24 gauge, 6 mm opening) to form the reinforcement cage. The slab shall be cast in situ or precast using rich cement mortar mix of 1:2 (cement:sand) with water-cement ratio not exceeding 0.45, applied in layers by hand troweling or shotcreting to achieve a dense, impermeable finish. Curing shall be done for a minimum of 7 days to ensure strength and durability. The slab thickness shall be aminimum 25 mm. Rate shall include all materials, labor, formwork (if any), scaffolding, curing, finishing, and incidental works complete in all respects as per engineer in charge. |
| 64 | M&L Granite 18 mm thick of any type work (table rubbed and polished) in steps, treads jambs, pillars, window- cills, cooking platforms, other plateforms and like inover and including 10mm thick backing coat in CM 1:4 cmplete all as specified. including pointing in white cement or colour cement(1:2) using marble dust with admixture of pigment to match withshade of granite( including mouldingect). |
| 65 | M&L for rounding to edges of Granite slabs one edge, such as in steps cooking plateform, and other similar situation. |
| 66 | S&F PVC (SWR) pipes single socketed,inanylength with rubber ring joints, laid in trenches or in floors ( 75mm bore diameter ) |
| 67 | S&F PVC (SWR) pipes single socketed,inanylength with rubber ring joints, laid in trenches or in floors ( 110mm bore diameter ) |
| 68 | S&FPVC (SWR) floor trap, plain with grating including jointing with solvent cement ( Diameter of outlet in 75 mm) |
| 69 | Cleaning the surface with mechanical grinder / wire brush .Filling & Coving done with SBR Cement or equivalent modified mortar. Pre wet thesurface and Providing and applying waterproofing treatment by applying two coats of Birla Opus Prime C2Kor equivalent acrylic cementitious, polymer modified elastomeric waterproof coating. |
| 70 | Material and Labour for Mangalore pattern roofing tile of any direction and in any position laid with cement mortat 1:6 over top of RCC roofing including necessary budding/ filletingcomplete all as specified including taking down old damaged tiles of any place and in any postion/ direction complete all as specified and as directed. |
| 71 | Providing and fixing suspended gypsum board false ceiling using 12.5 mm thick tapered edge gypsum boards conforming to IS:2095-1982, screw-fixed to G.I. ceiling framework comprising perimeter channels (0.55 mm thick) fixed to walls with nylon sleeves and screws, intermediate channels (45 mm x 0.9 mm thick) suspended from soffit at 1220 mm centers using ceiling angles and steel expansion fasteners, and ceiling sections (51.5 mm web with 26 mm flanges) fixed perpendicular to intermediate channels using connecting clips. Boards shall be mechanically screw-fixed with 25 mm drywall screws at 230 mm centers. All joints and tapered edges shall be finished flush using jointing compound, paper/fiber tape, and two coats of topcoat as per manufacturer’s specifications. The entire ceiling surface shall be finished with one coats of primer, followed by two coats of wall puttyin 3 mm and two or more coats of plastic emulsion paint of approved shade to achieve a smooth, uniform finish. |
| 72 | Demolition of Concrete of any description as in anypositionnot otherwisespecifically provided for all as Specified. |
| 73 | Supply and fabrication of 18mm thick MDF boards for cupboard carcass (sides, top, bottom, partitions), interior-grade, ISI-marked (IS:12406), density 600-800 kg/m³, brands like Century/Greenply. Free from warping/defects, suitable for lamination/painting. Includes cutting, shaping, assembling by skilled carpenters |
| 74 | Supply and fabrication of22mm thick MDF boards for shutters/doors, interior-grade, IS:12406, pre-laminated or plain for painting/veneering. Includes cutting, shaping, assembling, and edge lipping with PVC/wood.Color as per architect approval. |
| 75 | Supply and fabrication of 18mm thick MDF boards for shelves/back panels, interior-grade, IS:12406. Shelves to support 20-50 kg load. Pre-laminated or plain. Includes cutting, assembling, and 5% wastage. |
| 76 | Supply and application of 1.0mm thick high-pressure decorative laminates (external surfaces) and 0.8mm (internal surfaces), IS:2046, brands like Greenlam/Century. Satin/matte/glossy finish, color as approved. 1.5mm thick for horizontal surfaces. Includes surface preparation and bonding with synthetic resin adhesive (e.g., Fevicol SH). |
| 77 | Supply and application of PVC/wooden edge banding, 0.5mm-2mm thick, for exposed MDF edges. Color-matched to laminates or melamine-polished. Applied with hot-melt adhesive. |
| 78 | Supply and installation of primer and lacquer paint (e.g., Asian Paints Bekshar) for non-laminated MDF surfaces. Includes surface preparation, one primer coat, two finish coats. Or melamine/PU polish, two coats, glossy/matte. Color as approved. |
| 79 | Supply and fixing of stainless steel auto-close/soft-close hinges (e.g., Hettich/Hafele), 2-4 per shutter, 20-30 kg load, corrosion-resistant, nickel/chrome finish. Includes screws. BIS-compliant. |
| 80 | Supply and fixing of stainless steel/brass handles/knobs, 4-6 inch for doors corrosion-resistant, chrome/matte finish, brands like Godrej/Dorset. Includes screws. |
| 81 | Supply and fixing of stainless steel/brass handles/knobs, 2-4 inch for (drawers), corrosion-resistant, chrome/matte finish, brands like Godrej/Dorset. Includes screws. |
| 82 | Supply and fixing of multipoint/cylinder locks, key-operated, stainless steel/brass, brands like Godrej/Yale. Includes mounting hardware. BIS-compliant. |
| 83 | Supply and fixing of full-extension, ball-bearing drawer slides, side-mounted, soft-close, 30-40 kg load, brands like Hettich/Hafele. Stainless steel. Includes screws. |
| 84 | Supply and installation of wardrobe hanging rods (stainless steel, 25mm dia.) as per design. |
| 85 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc complete all as specified and directed. |
| 86 | Taking down of Split type Air Conditioner of any capacity 1.5/2 TR from existing location incl removal of outdoor unit by opening all electrical connection and suction & discharge line connection carefully & removing materials to store for keeping in safe custody for reuse at site. Filling the opening of old location with cement mortor, applying white wash on wall with matching with existing colour of the site. Refixing, installation of Split type Air Conditioner of any capacity 1.5/2 TRby filling of refrigerent, fixing of new bracket for installation of outdoor unit, fixing of suction and discharge copper tubes with replacement of insulation of suction & discharge line and making holes for passing of suction & discharge line through brick wall incl well finish with cement mortor, applying white wash, colour wash, distemper etc on wall to match with existing colour of the adjacent surface at new location, etc. complete all as specified and directed. |
| 87 | M & L for point wiring using 1.5 Sqmm lSI marked 1.1 KV grade single core FR LS flexible cable, conforming to IS: 694-1990, having multi-drawn thin strands of electrolytic copper conductors, conforming.to IS: 8130-1984 and insulation conforming to IS:5831-1984, for phase, neutral and earth continuity conductor connecting to earth dolly, drawn in (concealed) and including not less than 25 mm NB PVC medium grade conduits,conforming to IS: 9537 (Part 3) -1983, colour coded as specified in IS: 11353-1985, including factory made sunken,galvanized, not less than 1.00 mm thick modular flush sheet metal enclosure having top, bottom, side and back-wall knockout for conduit entry from any direction,conforming to IS: 14772- 2000 and suitable for modular cover-plates complete all as specified in IS: 732-1989 and directed. Note:- Circuit wire from DB to switch boards shall be included in the quoted rate. No additional payment will be paid to the contractor for the circuit submain. One light/fan point controlled by one switch 6 Amps |
| 88 | All as per iten no 87here-in-before for One 3 pin socket outlet 6 Amps on Independent board |
| 89 | All as per iten no 87here-in-before but for 4 sq mm PVC insulated copper conductor incl 4 sq mm PVC copper conductor used as earth wire for power point/AC point on independent board |
| 90 | Supply and fixing of Modular switch, one way, 6 Amps complete all as specified and directed. |
| 91 | Supply and fixing of Modular socket outlet, 6 Amps, 2/3 pin, 2 module combined complete all as specified and directed. |
| 92 | Supply and fix in replacement of SwitchSocket Combination2 in 1, 5 Amps /16 AmpsflushtypeComplete all as specified and directed. |
| 93 | Supply and fixing of Modular fan regulator step type, 120 Watt, 2 Module complete all as specified and directed |
| 94 | Supply and fixing single pole and neutral enclouser with a two pin and earth plug and socket complete with one MCB single pole 20 Amps complete all as specified and directed. |
| 95 | Supply and fix exhaust fan made of sturdy Engineering plastic complete withlouvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250 mm complete all as specified and directed. |
| 96 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 97 | Supply and fixing LED lights fitting 1x 10W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 98 | Supply and fixing round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders,LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 99 | Supply and fixing MCB SP 6-32 amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of single pole in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 100 | Supply and fixing MCB SPN 63 amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of single pole in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 101 | Supply and fixing Triple pole and neutral (TPN) 100 AMP 415V 10KA \"C\" curve miniature circuit breaker (MCB) of triple pole and neutral 100 Amp current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed. |
| 102 | Supply and fixing of Triple pole & neutral, double door, 4 way metallic modular distribution board confrming to IEC 61439-3, suitable for flush/surface mounting with provision for FP RCCB /RCBO /Isolator /MCB as incomer and TPN/SP MCBs as outgoing, reversible metal door, 200 Amps rated copper bus bar for each phase, fully insulated & shrouded neutral bar, earth bar, wiriest & cable ties for cable management, profited masking sheet etc. having IK 09 & IP 43 protection complete all as specified and directed . |
| 103 | Supply and fixing sheet metal enclosure distribution board (DB),when MCB to be used, dust and vermin proof, Single pole and neutral (SPN) 8 way with 200 Amps rated copper bus bar double doorprotection, neutral bar,earth bar, single pole and neutral 240 volts, MCBs used as incommerDouble door, flush to wall complete all as specified and directed. |
| 104 | Sub main wiring with 2 runs of 6 sqmm single core, multistranded PVC insulated unsheathed cable 1100 volts grade with copper conductor with 1 runs of 6 sqmm (1X6 Sqmm) PVC insulated unsheathed copper conductor cable as earth continuity conductor and connecting to common earth dolly, drawn in to and including PVC casing and caping incl all accessories as bend,tee, junction boxes elbows etc. complete all as specified and directed.Note : 2 runs of cable, 1 run of earth wire and one run of casing and caping shall be measured as one length. all as specified and directed. |
| 105 | Material and labour for extension of ceiling fan Down rod of size 20 mm dia medium grade steel tub, for existing ceiling fan up to a length suitable to comes just below the false ciling including painting of two coat synthetic enamel paint over a coat of red oxide primer including necessary welding and drilling works complete all as specified and directed. |
| 106 | Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less\"than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts andwashers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion |
| 107 | Schedule of Credit (Minus) Rs.13120.00NOTE: Bidder shall insert credit amount of Rs.13120.00 as ratein Green field under Col-13. |
