|
| 1 | Taking down cementplaster including racking out joints, hacking for key, scrubing down with water etc. completed all as directed. |
| 2 | M&L for rendering 15 mm thick in cement Mortar (1:4) on the surfacesfair faces of brick work/concrete and finished the surface fair and even complete as specified and directed |
| 3 | M&L for rendering 15 mm thick in cement Mortar (1:6) on the surfaces other than fair faces of brick work/concrete/and finished the surface fair and even complete as specified and directed |
| 4 | M&L for rendering 10 mm thick in cement Mortar (1:4) on the surfacesof ceiliing and finished the surface fair and even complete as specified and directed |
| 5 | M&L for 10 mm thick cement plaster in cement mortar 1:3 including concrete work for RCC chajja, fins, facia ceiling of chajja and like not exceeding 60 cm wide including necessary formwork, scoffolding, finished even & smooth without using extra cement complete all as specified and directed. |
| 6 | Complete removal of existing treatment on wall surfaces complete all as directed. |
| 7 | M&L for preparation of newly / old plastered surfaces ofwall and applying a coat of wall care putty 1 mm thick to make the surfaces truly smooth complete all as specified & directed. |
| 8 | M&L for applying two coats of distemper oil emulsion over a coat of primer white or tinted on new wall surfaces (or necessary preparation if required ) complete all as specified and directed. |
| 9 | M&L for preparingthe old surfaces and applying one coat of oil bound distemper white or tinted on walls complete all as specified directed. |
| 10 | M&Lforpreparation of old decorated ceilng surfaces and applying one coatof distemper oil emulsion white or tinted etc complete all as specified and directed by Engr-in-Charge. |
| 11 | M&L for preparation of old surface by brooming down or steel wire brushing, scrapping down smoke soot, moulds moss and efflorescent salts and trading oil and greasy spots and also to remove all loose scale of lime/colour wash, including removing nails making good holes, cracks patches only and applying one coat of white wash (lime) on walls including cornices plastered or un-plastered old decorated surface complete all as specified and directed by Engineer-in-charge. |
| 12 | All as specified in item No-11 above but applying one coat of white wash on ceiling. |
| 13 | M&L for preparation of newly plastered surface of wall and applying two coats of cement base paint over a coat of primar complete all as specified and directed. |
| 14 | M&L for preparation of old decorated surface of walls rubbing,watering etc and applying one coat of cement base paint complete all as specified anddirected. |
| 15 | M&L for preparation of old plastered surface of wall and applying two coats of cement base paintcomplete all as specified and directed. |
| 16 | M&L for preparetion of new steel surfaces and applying two coats of synthetic enamel paints over a coat of primar with red oxide on new steel surfaces over 10cm width or girth |
| 17 | M&L one coat of synthetic enamel paints on old steel surfacesover 10cm width or girth after necessary preperation ofold surfaces. |
| 18 | M&L for preparation of new wood and wood based surfaces and applying two coats of synthetic enamel paints over a primary coat of pink primerover 10cm width or girth |
| 19 | M&L for preparation of old painted surface of wood over 10 cm width or girth and applying one coat synthetic enamel paint complete all as specified and directed. |
| 20 | M&L for preparingthe old surfaces and applying one coat of exterior Emulsionwhite or tinted on walls and soffit of chajja (ceiling) surface complete all as specified directed. |
| 21 | complete removal of existing treatment on wall of any height of bldigs by brooming down with wire brushing, stoping andapplying two coats of exterior weather coat/ plastic emulsion under one coat ofprimer by mechanical applicator, complete all as specified and as directed by Engr-in-Charge(Weather coat shall be of Asian paint, Apex ,ultima or equivalent as approved by GE) |
| 22 | Demolition of brick work built in cement mortar or lime mortar complete of any description all as directed. |
| 23 | M&L for brick work with subclass ‘B’ bricks modular type, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed. |
| 24 | Dismantling floor, hearth or wall liling including cement mortar beding layer all as spd and directed by Engr-in charge. |
| 25 | Roughening old surfaces by picking, sweeping clean and washing down with water remove dust complete all as specified and directed. |
| 26 | M&L for coloured glazed ceramic tiles in vertical surface300x 450x 7 mm(any suitable size available in market) over 10 mm thick cement plaster in CM (1:4); set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces all as specified and directed |
| 27 | M&L for coloured non skid cermic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in CM 1:6. completed all as directed |
| 28 | M&L for coloured non skid cermic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in CM 1:6 all as spedified & directed. |
| 29 | All as item No 28 here in before but on vertical surface as skirting over and incl 10 mm thick rendering in CM 1:3 |
| 30 | M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular)area of each tiles exceeding 0.11 sqm but n.exc 0.18 sqm as in floor etc, with and including over 15 mm thick screed bed in CM(1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces complete all as specified and as directed. |
| 31 | M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular)area of each tiles exceeding 0.11 sqm but n.exc 0.18 sqm as in skirting/dado etc, with and including over 10 mm thick plaster in CM(1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces complete all as specified and as directed. |
| 32 | M&L for vitrified ceramic tiles light shade 10 mm thick (square / rectangular ) polish, area of each tiles not exceeding 0.36 Sqm in size as in floor etc set and jointed, joint free and pointed in white or coloured cement to matchincl 20 mm thick screed bed in CM 1:6 on concrete surface rough finish to recive tiles all as specified and directed. |
| 33 | M&L for vitrified ceramic tiles light shade 10 mm thick (square / rectangular ) polish, area of each tiles not exceeding 0.36 Sqm in sizeas in dado / skirting etc set and jointed, joint free and pointed in white or coloured cement to matchincl 10mm thick rendering in cement mortar 1:4finished rough to recive tiles all as specified and directed. |
| 34 | M&L for Machine cut kota stone slab flooring 18-20 mm thick set over and including 15mm thickscreed base in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with beewax polishingcomplete all as specified and as directed by Engr-in-Charge. |
| 35 | All as per item No-34 but here-in-before as in skirting over 10mm thick cement plaster in CM 1:4complete all as specified and as directed by Engr-in-Charge. |
| 36 | M&L Machine cut black Granite stone slab 16-18 mm thick (as in cooking platform) over 15mm thick (1:6) cement screedbase laid and jointed with greyement slurrymixed with pigment to match the shade of slab including rounding of edges,grinding and polishingcomplete all as specified and as directed by Engr-in-Charge. |
| 37 | Rounding to edges of stone slabs on edge such as in steps cooking platform and other similar situationscomplete all as specified and as directed by Engr-in-Charge. |
| 38 | Demolition of cement concrete (un reinforced) of any description incl. floor tile and in any position not otherwise specifically provided for |
| 39 | M&Lfor water proofing treatment to sunken surface of floor slab/skirting/ dome in following sequence:- |
| 40 | M&L for laying plain cement concrete padding 1:2:4 Type B0 (using 12.50mm graded stone aggregate) with and including integral water proofing compound \" Pidicrete URP manufactured by M/s Dr. Fixit or equivalent as per manufacturer instructions\" |
| 41 | M&L for plaster in CM 1:3, 15mm thick with and includingusing \" Pidicrete URP\" manufactured by Dr Fixit as per manufacturer instruction on floor/vertical surface in sunken portion and 72 Hrs tesing for water tightness by ponding of water. |
| 42 | M&L for applications of two coats of proof coat black manufactured by Dr Fixit or equivalent as per manufacturers instructions all over and testing again for water tightness by ponding of water for 72 Hrs. |
| 43 | M&L for cement concrete 1:5:10 Type E2 (40mm graded stone aggregate) as in mass concrete. |
| 44 | Easing of existing door shutters for easy closing / opening tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed by Engr-in-charge. |
| 45 | Taking down chowkhat or frame with shutters ( without taking off shutters from the frames)n exc 1.50 Sqm each complete all as specified and directed. |
| 46 | Taking down chowkhat or frame with shutters ( without taking off shutters from the frames) Exc 1.50 Sqm butn exc 4 Sqm Sqm each complete all as specified and directed. |
| 47 | Taking down shutters area n exc 1.0 Sqmeachcomplete as specified and directed. |
| 48 | Taking down shutters area exc 1.0 Sqm but n.exc 2.0 sqm each complete as specified and directed. |
| 49 | Taking down of shutters area exc 1.0 Sqm but n.exc 2.0 sqm each and refixing in same opening shuttersincluding cutting to size and fittingcomplete as specified and directed. |
| 50 | M&L for Plain fillets. square, rectangular or triangular in section, exc 6 Sq.cm but n.exc 25 Sq.cm clean sawn, secured with nails or brads. |
| 51 | S&F Pressed steel frames for doors (105X60MM) with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.,complete all as specified and directed. |
| 52 | S&F Pressed steel frames for doors (125X60MM) with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.,complete all as specified and directed. |
| 53 | M&L for cement concrete type C-0,1:3:6 (12.50 mm graded crushed stone aggregate) as in coping, bed block , water trought and similar works including rounding, chamfered and throting complete all as specified and directed. |
| 54 | M&L for 2nd class hardwood plain, solid, straight chowkhats and frame, wrought, framed rebated on solid, rounded or chamfered, put together with glue pinned at joints supply & fixed. |
| 55 | S&F flush shutter (35mm thick) factory made solid core construction, with block board core and plywood face panels, commercial type on both sides and fitted to chowkats complete all as specified and directed. complete all as specified and directed. |
| 56 | S&F factory made 35 mm thick glazed and Skelton door shutter 2nd class HW (rail and style ) open rebated and prepared to receive glass / Gauged divided in to squareswithplain chamfered or rounded mitred and rebatedfitted with cut and mitered beads for securing glass/ gauged etc size of members of shutters as specified in SSR Part – I section-8,clause 8.24(a) and fixed to Chowkhats, complete all as specified and directed. |
| 57 | S&F factory made 30 mm thick glazed and Skelton windows and ventilator shutter 2nd class HW open rebated and prepared to receive glass / Gauged divided in to squareswithplain chamfered or rounded mitred and rebated with sash bars (any numbers) fitted with cut and mitered beads for securing glass/ gauged etc size of members of shutters as specified in SSR Part – I section-8,clause 8.24(b) and fixed to Chowkhats, complete all as specified and directed. |
| 58 | S&F solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube S&F in opening all as shown on drawing and specified. |
| 59 | S&F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap inside for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/seated to the stiles and rail with suitable PVC sheet bending and jointed to gather with solvent cement supplying and fixing in the frame at site as per specification and drawingcomplete all as specified and directed. |
| 60 | S&F powder coated aluminium ventilator louvre type with frame, aluminium section weighing 0.55 Kg/M including 4mm thick glass/ss wire mesh necessary joining cleats, glazing clips, rubber packing, side handles fixed to wall with fastener etc., complete all as specified and as directed |
| 61 | S&F powder coated Aluminium three track sliding glazed window manufactured with approved aluminium section with three sliding shutters each shutter width one half of the length of window with the following specifiecation and making good the adjascent surfaces :-(a) Window frame of cross section 101mmx40mmx1.5mm thick.(b) Three way track for smooth slding shutters of cross sections 91.80mmx31.75mmx1.1mm thick. (c) Sliding shutter frame of cross section 40x18x1mm.(d) Aluminium glazing stip of size 18.2x16.66mm. (e)4mm thick flat glass superior quality for two shutter. (f) IDPE rubber gasket for fixing glass. (g) Locking cleat/device as shutter 01 Nos. (h) 02 Nos sliding roller per shutters. (j)aluminium wire cloth 0.36mm stainless steel nominal dia of wire and average width of aperature 1.40mm for one shutter.(k) Fixing screws for frame with wall 06 per window with fancy design.(Note: Window will be measured outer to outer frame and no extra to be paid. |
| 62 | S&F powder coated alumunium glazed door shutter with two panel made of vertical style of size 85x44.5x1.5mm and Top rail size 114.30x44.5mmx1.5mm bottom rail 150mmx44.5mmx1.5mm and middle rail 114.3mmx44.5mmx1.5mm all alumunium section including all fittings as per door shutter such as alumunium door handles round type-2 Nos ,stainless steel hinge 100mm size -4Nos,central mortice lock ,alumunium tower bolts 300mm-2 Nos double leg alumunium anodised door stopper and hydraullic door closer ,designation No 2, universal type ,cast iron body ISI marked and necessary clips rubber packing and alumunium beading to receive and including 5.5mm thick plain tined glass or 6mm thcik alumunium composite panel in top and bottom panel. complete (Note: Door shutter will be measured outer to outer frame |
| 63 | S&F in Repair prelaminated particle board 18-19 mm thick interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination in cupboard complete all as specified and directed. |
| 64 | M&L for framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled incl 1 mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as requiredfor fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete. |
| 65 | M&L for 30mm width of flap MS piano hinges complete as directed at site |
| 66 | S&F Aluminimum anolised barrel tower bolt of extroded section 150mm long , complete all as specified and directed |
| 67 | S&F Aluminum handle cast type anodized size 150 mm long, completeall as specified and directed. |
| 68 | S&F for 300 mm mild steel helicalspring including roller and roller plate, complete all as specified and directed |
| 69 | S&F for MS Butt hinges medium weight,cold rolled Mild Steel for 100 mm size all as specified |
| 70 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed (Length of bolt in 300mm) |
| 71 | S&F in repairs Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed (Length of bolt in 300mm) |
| 72 | S&F in repairs Aluminimum anolised barrel tower bolt of extroded section 150mm long , complete all as specified and directed |
| 73 | S&F in repair Aluminum handle cast type anodized size 150 mm long, completeall as specified and directed. |
| 74 | M&L for framed work such as grills, grating doors or gates etc. of angle iron, flat iron with ends of bars shouldered and or rivetted or forged into spikes framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings for terrace, framework of water tanks and similar work confirming to Fe 290. |
| 75 | S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 76 | S & F in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 77 | Hacking out old broken glass (any thickness, size, quality or desereption) from wooden/Steel frames. |
| 78 | M&L 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc. 0.5 Sqm in each pan including glazing pins where required. |
| 79 | S&F 3.00mm thickpin head, figured glass and glasing with oil putty in Squres/Ractangle n.exc 0.5 Sqm in each paneincluding glazing pins where required. |
| 80 | M&L for cement concrete type B1,1:2:4 (20 mm graded crushed stone aggregate) as in coping, bed block , water trought, hold fast and similar works including rounding, chamfered and throting complete all as specified |
| 81 | S&F in repairs decorative curtain rod made out of 25mm dia (outer dia) MS pipe having wall thickness 0.63mm, PVC coated of any colour and pattern as approved overall dia 28 to 28mm, includiing and including two nos brackets on each ends alongwith globe on each ends for earch window/door fro fixing complete all as specified and directed with fancy design |
| 82 | S&F in repairs curtain rails 20 mm dia, mild steel, chromium plated including with fixing brackets, stops, rollers etc for cub board. |
| 83 | S&F utensil rack / Kitchen rackstainless steel size 850 mm x 800 mm x 270mm approved Make complete all as specified and directed with fancy design. |
| 84 | Supply and fix in repair, sinks with drainage board made of stainless steel 1 mm thick sheet for, kitchen or laboratory with plugs, washers and waste pipe; cast iron cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mmcomplete all as specified and as directed by Engr-in-Charge. |
| 85 | S&F in repar vitreous China squatting pattern water closet\"orissa pattern \" size 580 x 440 mm white with integrated foot rests including provn of lime concrete |
| 86 | S&F in repaire Premium one piece ceramic western floor mounted one piece water closet westerncommode with soft closed seat cover for Lavatory in built flushing cistern, toilet including connection to drain ( or outgoing pipe) and to flushing pipe, antisyphonage pipe etc incl P or S trap. |
| 87 | S&F in repaire Vitreous china white wash down water closet (Pedestal pattern) including connection to drain ( or outgoing pipe) and to flushing pipe, antisyphonage pipe etc incl P or S trap. |
| 88 | Supply onlyplastic water closet seat, white closed pattern with flat bottom and cover and mild steel chromium plated or anodised hinging device |
| 89 | S&F in repair 600mm x 450 mm bevelled edge mirror of selected quility glass, mounted on 6 mm thick commercial ply wood and fixed to wooden plugs with chromium plated brass screwesand cup washers complete (with fancy design) |
| 90 | S&F in repair Bath cabinet mirror of size 350 x 450 mm made ofPTMT alloy complete all as specified. With fancy design. |
| 91 | S&F inrear Health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in positiion complete in all respect as specified |
| 92 | S&F in repair chromium plated hand shower with fancy design. |
| 93 | S&F in repair chromium plated toilet paper holder size 150 x150mm complete all as specified and directed. |
| 94 | S&F in repair for 10ltrs capacity flushing cistern PVC low level valve less, symphonic action type flushing cistern white with inlet, ball valve, float and handle including brackets and 32 mm flush pipe of polyethylene complete all as specified and directed. |
| 95 | S&F in repairs. vitreous china wash basin, white flat back size 550x400mm (excluding taps, incl.CP waste coupling & PVC waste pipe and brackets |
| 96 | S&F in repair for PVC waste pipe of 32/38/40 mm dia and 1000 mm long to WHB, urinal and Kitchen sink complete all as specified and directed with fancy design. |
| 97 | Taking up or down steel tubing and connection of 15 bore. |
| 98 | Taking up or down steel tubing and connection of 20 bore. |
| 99 | Cutting chases in brickwall pinning in making good to facings where required and pointing in cement mortar 1:3 to ends and cutting chases for concealed water tubing and making good cutting n.exc. 10 cm girth. |
| 100 | S&F 15mm dia tubes medium grade galvanised with, all new fitting and fixed complete to walls and ceiling or laid in floor |
| 101 | Refixing old steel tubing and connections in new or old position 15mm dia |
| 102 | S&F 20mm dia tubes medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floor |
| 103 | Refixing old steel tubing and connections in new or old position 20mm dia |
| 104 | S&F in repairs pillar tap cast 15mm bore copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without lettered head \"HOT\" or \"COLD\" with long screwed shank and flynuts screwed for iron pipe (half turn type). complete all as specified & directed. |
| 105 | S&F in repairstop valve (concealed type), cast copper alloy fancy type chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm bore. complete all as specified & directed.complete all as specified & directed. |
| 106 | S&F in repair Angle valve / stop valve , cast copper alloy fancy type chromium plated with long shankandcup (concealed type) screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm bore with fancy design (half turn type).complete all as specified & directed. |
| 107 | S&F in repair Angle valve two way, cast copper alloy fancy type chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm bore with fancy design (half turn type). complete all as specified & directed. |
| 108 | S&F in repairs brass CP wall mixer tap, fancy type, half turn 15mm dia bore (three in one) for mixing hot and cold water screwed down for iron pipe and fixed in wall and all as specified and directed. |
| 109 | S&F in repairs Brass CP mixer basin tap (mixer pillar tap) 15mm dia borefor mixing hot & cold water with lettered HOT and COLD screwed down for iron pipe with fancy design. |
| 110 | S&F in repairs Bib taps fancy type cast copper alloy chormium plated 15mm bore with crutch or butterfly handle, screwed down, screwed for iron pipeor for brass ferrule (half turn type) |
| 111 | S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm |
| 112 | M&L Brass Chromium plated shower rose 125mm size with or without swivel joints any size including fixing to steel pipe or union incl shower. |
| 113 | S&F in repair Brass chromium plated tubular towel rail 20mm dia,D type, 60 cm long between flanges. |
| 114 | Dismantalling of existing water tanks and removinging to store and S&F 1000 ltr capacity Rotational moulded polyethylene water storage tank (three layer)(cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I,including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod &highdensity plastic ball screwed for iron pipe and fixed. |
| 115 | Dismantalling of existing water tanks and removinging to store and S&F 500 ltr capacity Rotational moulded polyethylene water storage tank (three layer) (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I,including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod &highdensity plastic ball screwed for iron pipe and fixed. |
| 116 | S&F as in repair water tank cover for 500/1000 Ltrs capacity suitable for PVC tank |
| 117 | M&L for cleaning and removing all scale and dirt etc, from 1000 ltr tanks and from mouths of circulating pipes etc,complete all as specified and directed. |
| 118 | S & F in repair 20 mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm - 690 gms) |
| 119 | S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long |
| 120 | S&F Corner Glass Shelf 300 mm (with fancy ABS brackets) of size (300x300)mm complete all as specified and as directed with fancy design. |
| 121 | S&F in repair CP soap Dish approx size 160x 160x90mm complete all as specified and directed |
| 122 | M&L for roof treatment in repair by complete removel of existing oldtreatment and treatedwith following specifications :-(a)Brushing neat cement slurry @ 3Kg per Sqm on roof slab.(b)15 mm thick cement plaster fair finished using cement mortar (1:4) with WPC on roof slab.(c)Applying oil based bitumen primer @ 0.30 ltr/Sqm on plastered surface.(d) Applying modified APP polymeric membrane 3mm thick and minimum weight 3.00 Kg / Sqm for water proofing of roof , sealing as directed at site with 100 mm over laps as per manufacture\"s instruction.(e)Applying two coat of aluminium paint @200 gm/Sqm over bituminous surface of membrane.Note : Supply only WPC shall be measured and paid separately under relevant item. |
| 123 | Supply only integral water proofing compound. ISI marked |
| 124 | M&L for 100 mm thick cement concrete in foundations/sub base of floor in cement morter (1:4:8) type D-2 complete all as specified and as directed by Engr-in-Charge. |
| 125 | M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35Grade with grey cement and pigmentlaid over and including 50mm thick sand cushion, joints of tiles filled with dry sand |
| 126 | M&L for coloured glazed chequered cement concrete tiles with grey cement and no pigment 30cmx30cmx25mm thick over 15mm thick screed bed in CM 1:6 set jointed and pointed in neat cement slurry in floors complete all as specified and as directed by Engr-in-Charge. |
| 127 | S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to I.S. 1161-1998 |
