|
| 1 | Taking down old XLPE/PVC/Service cable and from 9 mtr height of pole and removing the materials from site and making good thedisturbed surfacesetc complete all as specified and directed. |
| 2 | Supply,laying,jointing,testing andcommissioningXLPE insulated, armoured, heavy duty, LT UG cable with aluminium conductor,1100 volts grade cross sectional area300 sqmm 3.5 core connectedwith aluminium lugsconnectedby cramping toolsall as specified and directed at site.Note:- Excavation andearth work will be measured and paid separately. |
| 3 | Description all as per Srl items No.2here-in-beforebut of size 70 sqmm x 3.5 core |
| 4 | Description all as per Srl items No.2here-in-beforebut of size 50 sqmm x 3.5 core |
| 5 | Description all as per Srl items No.2here-in-beforebut of size 25 sqmm x 4 core |
| 6 | Description all as per Srl items No.2 here-in-beforebut of size 16 sqmm x 4 core |
| 7 | Taking down/dismantling LT PCC/steel tubular poles ,studs,insulator including V clamp,cross arms , earth wire support etc and deposit to MES store complete all as specified and directed at site by Engr-in-charge. |
| 8 | M & L for Erection in vertical position steel tubular sewage pole (ISI market) with cast iron base plate, final taper plug, bolts, nuts & screws etc, type410-SP-31 (09 Mtr long) confirming to IS 2713 part 1 to 3) 1980 including two coats of black bituminous paint throughout internally and externally upto planting depth and two coats of synthetic enamel paint of alternate black and red strips, 30 cm high over one coat of red oxide primer upto 1.5m height from ground level/coping. The remaining portion shall be painted with two coats of aluminium paint over coat of red oxide primer complete all as specified and directed. Note : Necessary earthwork, PCC shall be measured and paid for separately. |
| 9 | Excavation in trenches in soft/loose soil n.exc 1.5 mtr wide and n.exc 1.5 mtr depth and getting out for taking out / laying of cable complete all as specified and directed. |
| 10 | Supply and providing sand cushioning with dry clean sand 15 cm below cable and 8 cm above the cable complete all as specified and directed. Note : Punned thickness shall be measured for the purpose of payments. |
| 11 | Supply and laying unreinforced precast cement concrete cable covers, Class LV, Type-1, size250 mm x 150 mm x 40 mm in trenches for cable protection complete all as specified and as directed by the Engineer - in -Charge. |
| 12 | Removing surplus excavated material not exc 50 mtrs and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed. |
| 13 | Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed. |
| 14 | M&L for PCC(1:4:8) type D2 using 40 mm graded stone aggregate in foundation mass concrete and fillingincluding weathering slightly rounded or chamfered completewith necessary use and waste fo formwork complete all as specified and directed at site. |
| 15 | M&L for PCC(1:2:4) type B1 using 20 mm graded stone aggaregate in kerbs/coping /bed plates and like including weathering slightly rounded or chamfered completewith necessary use and waste fo formwork complete all as specified and directed at site. |
| 16 | Supply and fix in replacement of 100 mm bore GI pipe light grade fixed on pole /trenches/wall/road crossing etc complete with clamp nut bolt etcall as specified and directed at site. |
| 17 | Supply and fix in replacement of 50 mm bore GI pipe light grade fixed on pole /trenches/wall/road crossing etc complete with clamp nut bolt etcall as specified and directed at site. |
| 18 | M&L for trenchless boring of dia 120 mm below the GL 500 mm to 1500mm under road crossings/foot paths by manual / Boring machine complete all as specified and directed at site. |
| 19 | Supply ,fabrication, installation and testing of LT Panel out door type factory made CPRI Approved, water and vermin proof protection of size 1200 mm x 1000 mm x 500 mm (over all dimension) made out of 3.00 mm thick CRCA sheet dully supported with mild steel angle iron of size 50 x 50 x 6 mm vertical frame and legs with mild steel flat iron 25 x 5 mm in horizontal sides of the frame with front and back side openable ,single hinged door / shutter with locking arrengement and powder coated finish both internal and external steel surfaces after necessary preparation of steel surfaces including providing PCC (1:3:6) type C2 foundation of suitable size and connections of all outgoing / incommingcableinclusive of necessary excavation and earthwork as required including the following fitment accessoriesand also including removing old existing one complete all as specified and as directed (Note: The Contractor Shall submit the drawing with sample of accessories and CPRI certificate for approval before execution the work.).INCOMMING :-(a)Copper strip busbar of 650 amps rated capaacity wrapped with PVC sleeves with maintained the colour code and provision of making holes with Copper nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends= 04 Nos, LED Neon indicator lamp (RYB) with holder and fuse holder 230/250 volts, AC -01(set of three) Digital Multifunction meter of suitable capcity.(b) 4 Pole MCCB 400 Amps with rotaryhandle, adjustable thermal magnetic release type, 4 pole, 415 Volts, Ics = 100% Icu, 36 KA breaking capacity including all fixing accessories with both ends spreader links-01 NosOUTGOING :-(a) 4 Pole MCCB 200 Amps with rotaryhandle, adjustable thermal magnetic release type, 4 pole, 415 Volts, Ics = 100% Icu, 25 KA breaking capacity including all fixing accessories with both ends spreader links-02 Nos(b)4 Pole MCCB 100 Amps with rotaryhandle, adjustable thermal magnetic release type, 4 poles, 415 Volts, Ics = 100% Icu, 16 KA breaking capacityincluding all fixing accessories with both ends spreader links-03 No (c)4 Pole MCCB 63 Amps with rotaryhandle, adjustable thermal magnetic release type, 4 poles, 415 Volts, Ics = 100% Icu, 16 KA breaking capacity including all fixing accessories with both ends spreader links-02 Nos |
| 20 | Supply ,fabrication, installation and testing of LT Panel out door type factory made CPRI Approved, water and vermin proof protection of size 1000 mm x 1000 mm x 600 mm (over all dimension) made out of 3.00 mm thick CRCA sheet dully supported with mild steel angle iron of size 50 x 50 x 6 mm vertical frame and legs with mild steel flat iron 25 x 5 mm in horizontal sides of the frame with front and back side openable ,single hinged door / shutter with locking arrengement and powder coated finish both internal and external steel surfaces after necessary preparation of steel surfaces including providing PCC (1:3:6) type C2 foundation of suitable size and connections of all outgoing / incommingcableinclusive of necessary excavation and earthwork as required including the following fitment accessories complete all as specified and as directed (Note: The Contractor Shall submit the drawing with sample of accessories and CPRI certificate for approval before execution the work.)INCOMMING :-(a)Copper strip busbar of 300 amps rated capaacity wrapped with PVC sleeves with maintained the colour code and provision of making holes with Copper nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends= 04 Nos, LED Neon indicator lamp (RYB) with holder and fuse holder 230/250 volts, AC -01(set of three) Digital Multifunction meter of suitable capcity.(b) 4 Pole MCCB 200 Amps with rotaryhandle, adjustable thermal magnetic release type, 4 pole, 415 Volts, Ics = 100% Icu, 36 KA breaking capacity including all fixing accessories with both ends spreader links-01 NosOUTGOING :-(a)4 Pole MCCB 100 Amps with rotary handle, adjustable thermal magnetic release type, 4 poles, 415 Volts, Ics = 100% Icu, 16 KA breaking capacityincluding all fixing accessories with both ends spreader links-03 No (c)4 Pole MCCB 63 Amps with rotary handle, adjustable thermal magnetic release type, 4 poles, 415 Volts, Ics = 100% Icu, 16 KA breaking capacity including all fixing accessories with both ends spreader links-03 Nos |
| 21 | Supply ,fabrication, installation of loop in loop out boxwater and vermin proof protection of size 500 mm x 500 mm x 400 mm (over all dimension) made out of 3.00 mm thick CRCA sheet dully supported with mild steel angle iron of size 50 x 50 x 6 mm vertical frame and legs with mild steel flat iron 25 x 5 mm in horizontal sides of the frame with front and back side openable ,single hinged door / shutter with locking arrengement and powder coated finish both internal and external steel surfaces after necessary preparation of steel surfaces including providing PCC (1:3:6) type C2 foundation of suitable size and connections of all outgoing / incommingcableinclusive of necessary excavation and earthwork as required including the following fitment accessories complete all as specified and as directed.INCOMMING :-(a)Copper strip busbar of 150 amps rated capaacity wrapped with PVC sleeves with maintained the colour code and provision of making holes with Copper nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends= 04 Nos, LED Neon indicator lamp (RYB).(b) 4 Pole MCCB 100 Amps with rotaryhandle, adjustable thermal magnetic release type, 4 pole, 415 Volts, Ics = 100% Icu, 16 KA breaking capacity including all fixing accessories with both ends spreader links-01 Nos |
| 22 | S and F in repair thermoplastic junction loop in / loop out box of internal size 230x170x105 mm made out of FRP (Hot moulded type) with weather proof canopy and locking screws alongwith 5/6 Amps MCB-01 No, 15 Amps rated 3 pole connector - 01 Nos, neutral link mounted and Din rail suitable size for mounting MCB/Connector complete in the box, duly fixed to steel tubular pole using 25 x 3mm FI clamp with suitable gland and lugs for connecting cable including taking down old one complete all as specified and as directed. |
| 23 | Supply and fix 1.5 Sqmm, single core Two runs PVC insulated and unsheathed FR cable 1100 Volts grade with multistranded copper conductor and one run of 1.5 Sqmm cable for common earth dolly drawn through heavy duty PVC conduitfor street light pole including connection from kiosk box to street light fittings complete all as specified and directed. |
| 24 | Supply and Fix Heavy duty PVC Non metallic conduit of externaldia 20 mmcomplete all as specified and directed at site.Make : Anchor/Polycab/Plaza |
| 25 | M &L for GI Earthing complete with GIearth plate electrode 60cm x 60cm x6 mm buried directly in ground verticvally to size of depth not less than 0.90x 0.60 x 2.25 mtr below ground level with top edge ofthe plate at a depth not less than 1.5 mtr below ground level, earth plate connected to galvanised earthstripof size 25x3 mm, 7.5 mtr long by means of brazing nuts, bolts, check nuts, & washers,testing of completion (drawn in earth lead protection pipe light gade GI of size 32/40 mm dia) by means brazing at both edges with vertical plane of electrode all as shown in plate No 3 of SSRPart - I connected to earthing lead with Main switch/main control board,filling with charcoal dust 200 Kg, and common salt 100 KG ,including necessary excavation and earth work in any type of soil ,perforated watering pipe,funnel with wire mesh,earth lead protection pipe light grade PCC chamber 1:3:6 type C1 (for even finish on both the faces) and RCC cover 1:2:4 Type B1,450 x450 x50 mm thick with 6 mm dia CTD bars 150 mm c/c with 2 Nos of handles of 10 mm dia steel rod all as specified and directed and testing on completion and connected to equipment with lugs and screw nuts etc all as specified and directed by EICNote :(i) 7.5 RM GI earth wire deemed to be included in quoted rates beyond 7.5 RM wire shall be measured and paid separately.(ii) Earth resistance of earth pit should be not more than 02 Ohms on testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost.(iii) Rate quoted by the tenderer is deemed to included salt & Charcoal upto & above 450 mm top of GI Plate. |
| 26 | S&F GIstrip of size 25x4 mm connected both ends with necessary bolts, nuts & washrs complete all as specified and directed. |
| 27 | M&L mild steel as in cross arms bracing supports clamps and back planes fabricated from structural steel section including nut, bolts washers welding welding drilling holes for bolts in any shape and size as indicated or directedand inclusive of one proimer coat one undercoat one finishing coat of aluminium paint complete. paint complete to support the cables all as specified. |
| 28 | Supply & Fix wire mess fencing of opening size 35mm x 35mm and 2mm dia of wire MS galvanisd fencing, any or type complete all as specified and as directed. |
| 29 | M & L , hardcore of gauge n-exc. 40mm, deposited ,spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface. Note:- Hardcore of gauge not exceeding 40mm shall executed near base of electric Panels and inside the transformer fencing etc. |
| 30 | Dismantling/ Taking down existing overhead line ACSR conductor of any description |
| 31 | Dismantling/ Taking down LT insulator, 1100 volts of any description |
| 32 | Dismantling/ Taking down existing cross arms of any description |
| 33 | Excavating in trenches, n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc, or for shafts, wells, cesspits, manholes, pier holes, etc n exc 10 sqm on plan and n.exc 1.5m in depth and getting out any type of soil. |
| 34 | M & L Brick wk with sub class ‘B’ bricks straight or curved on plan exc. 6m means radius in CM 1:6. |
| 35 | M & L for RCC (1:2:4) type B-1using 20 mm graded stone aggregateas in plinth beam, cantilevers, bressummers, lintle over 1.5m span etc. |
| 36 | Use & waste frame workto soffits of suspended slab such as floor or roof slab, chajjas and similar work not exc 200 mm thick (Horizontal or slopeing) rough finished complete. |
| 37 | M & L Mild steel bars 10mm diaTMT Bars and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to |
| 38 | Description all as per ser item No 37 above but, 6mm to 8mm dia. |
| 39 | M&L for broken stone hardcore of gauge n exc. 63mm, deposited, spread and levelled in layer n exc. 15cm thick, watered and rammed to a true surface complete. |
| 40 | M&L for 75mm thick PCC type C2 1:3:6 (using 40mm graded stone agg) as inplinth protection/Path/floor finishing surface of concrete topping even and fair without using extra cement complete. |
| 41 | M&L for 100mm thick PCC type D2, 1:4:8 (using 40mm graded stone agg) as insub-floor surface complete. |
| 42 | M&L, 20mm thick screed bed or bedding layer of mortar in CM (1:6) for lying floor finishes and surface fair and even. |
| 43 | M&L for machine cut kota stone slab 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including circular cutting,chamfering of edges as required. |
| 44 | M&L for treating the surface with beeswax polishing by machine to existing kota stone flooring. |
| 45 | M&L for Chequered cement concrete tiles (300x300x25)mm thick, set, jointed and pointed in neat grey cement slurry with grey pigment cement and pigment in floors |
| 46 | M & L, 10mm thick rendering on fair faces of brick work/concrete surface in CM (1:6) surface finished fair & even complete. |
| 47 | M & L, 15mm thick rendering on fair faces of brick work/concrete surface in CM (1:4) with applying water proofing compound (As per manufrature instruction) surface finished fair & even complete.(WPC will be paid saperatelly) |
| 48 | Supply only liquid water proofing compound. |
| 49 | S&F powder coated anodised/aluminium frame of size 65mm x 38mm x 1.00 thick or appropriate section as directed including with frame standard section for sliding type windows /ventilatorss with oneor more rebates including joining cleats, beading, handle with locking arrangement, rubber gasket for fixing etc complete with and including 5.5 mm thicktinted glass n.exc 1 Sqm each panes(window of frame 3 tract wt not less than 0.50kg/RM and shutter having wt not less 0.45kg/RM) all as specified and directed |
| 50 | S&F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanized wire staples over steel windows and gauzed door. |
| 51 | M&L for applying Two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 ltr/10sqm over and including priming coat of exterior primer applied @ 0.90 ltr/10sqm over a coat of plaster of paris putty of 1mm thickness on new plastered wall surfaces. |
| 52 | M & L preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of 1mm thick wall care putty complete. |
| 53 | S&F for Roof trusses (framed), trusses, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) incl distance pieces, cleats etc completeFe 410-W(Gde E-250) quality-A. |
| 54 | M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing completeFe 410-W(Gde E-250) quality-A |
| 55 | M&L Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming tofe.290.Gde-E-165 |
| 56 | M&L, applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of newly steel surfaces of any description over 10cm width or girth not otherwise described. |
| 57 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated/ semi - corrugated steel sheet 0.50mm thick of an colour having tensile strengthof 550 Mpa as in roof covering fixed with coach screw as per manufacturers instrution complete. |
| 58 | S&FPre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering as ridge/cladding to wall, fixed with self tapping screws as specified |
| 59 | S&F for Anodised Aluminium snap grid size 605x604mm frame work for false ceiling all as specified and directed by Engr-in- charge. |
| 60 | M&L 4mm thicknon asbestos fibre cement designer building board of size 600X600 fixed or laid/inserted to timber/GI/Aluminium framework fixed in ceiling flat or sloping. |
| 61 | M&L for PCC type C2 1:3:6 (using 40mm graded stone agg) as in surface channels and drains. |
| 62 | M&L for extra forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra, including forms, moulds, mitred/ stopped end etc. |
| 63 | M & L PCC 1:2:4 type B-1 using 20 mm graded store aggregate as in coping and channel including use and waste of form work where necessary. |
