|
| 1 | S&F looking mirror size 600 mm x 450 mmof selected quality glass,5.5 mm thick, mounted on 6 mm thick AC building boardcommercial ply wood with PVC frame all round fixed with chromium plated brass screws including taking down old looking mirror all as specified and as directed. |
| 2 | S & F 3 mm thick Figure glass/ tinted glass ordinary quality and glazing with oil putty/wooden lappingin square not exc 0.58 Sqm each in each pane, lovers etc all as specified and as directed. |
| 3 | Demolition of unreinforced concrete is ground floors and pavings n exc 15 cm thickness (below or above ground level) removing debris outside MOD land. |
| 4 | M&L for 75 mm thick cement concrete type C-2, 1:3:6 (40mm graded stone aggregate) as in plinth protection finishing even and smouth wiyhout using extra cement. |
| 5 | Demolition of reinforced cement concrete in any position and in any description not otherwise specifically provided for. |
| 6 | M& L for RCC M-20 (nominal mix) 20mm graded stone aggregate as in Slabs supported on walls,Slab for self ,Perforateddrain cover with grip, ramp etc. complete all as specified and as directed by EIC. |
| 7 | M&L for TMT steel bars 10mm dia and over cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.9 mm dia or securing with clips in main bar complete |
| 8 | M&L for TMT steel bars 8mm dia cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.9 mm dia or securing with clips in stirrups complete. |
| 9 | M& L for Formwork to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers, lintels, cantilevers, shelves including sup- ports,verhangs, etc. also splays between floors and beams, etc. |
| 10 | Demolitionof brick work or stone/boulder built in any lime mortar or cement mortar including all quins,arches pillars etc but excluding ashlar facing dressed stone work & precast concrete articles for portion ordered to be dismantled and removing debris outside MOD land. |
| 11 | M&L for precast solid block masonary 1:3:6 (type C1) straight or curved on plan exc 6m mean radius, exc 10 cm width and set in CM (1:6) etc complete all as specified.gradaint camber. |
| 12 | M&L for Powder coatedaluminium window/ventilators with double side hungshutter forglazing and gauging and frame with one or more rebates made outanodised aluminium section including section for fixing of aluminium grills with suitable fixtures, jointing cleats for fixing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminiumbeading screws, type B20 100mm long suitable handle and anodised alumium fittings such asstay, hinges glazing with 5.0 mm thick tinted sheet glass and gauging with aluminium wire cloth of size 0.45mm dia of wire and 1.40mm apperture except fixed glazinng (FG) all as specified and directed. (Tint of glass shall be approved by GE ,5mm thick glass sheet glass ortinted glassappx 0.70 Sqm And wiremesh appx 0.70 Sqm included in this item). Size of section for Window frame 100mm X 45mm and 1.20mm thick ( length appx 5.50m).Size of section for Glass shutter 85mm X 45mm and 1.20mm thick(length of shutter appx 4.70m).Size of section for wiremesh shutter 40mm x18 mm and 1.20mm thick ( length of shutter appx 4.80m). |
| 13 | M&L for Powder coated aluminium anodised grill of approved shape with opening in grill 66mm x 80mm (diagonally) or nearest to + 5mmmade out of standard aluminium moulded section of size 4.4 mm x 7mm incl C section bidding for opening window panels bottom and top of window 4 Nos opening both side of middle section of window frame inbult to prevent any injury while opening window panels as per direction of Engineer in Charge . |
| 14 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises |
| 15 | M&L Screed bed or bedding layer or mortar 15mm layer of mortar 15mm thick for laying floor finishes in CM 1:6 |
| 16 | M&L for light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as approved by Engr-In-Charge. |
| 17 | M&L for light shade vetrified ceramic tiles 10mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 sqm in skirtingetcset and jointed in neat cement slurry and pointed in white or coloured cement to match as approved by Engr-In-Charge. |
| 18 | M&L for rendering 10mm thick in CM 1:3 as backing coat on wall surface incl preparation of surfacesto receive dado finished. |
| 19 | M&L for 450x300 x 7mm thick glazed coloured ceramic wall tiles/ digital tilesas in vertical surfaceand jointed in neat cement slurry and pointed in white or coloured cement to match pattern approved by Engr-in-Charge |
| 20 | M& Lfor Non - skid Ceramic Coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry andpointed in white or coloured cement to match |
| 21 | Excavating over areas, n exc 1.5m deep and getting out soft/loose soil |
| 22 | Removing excavted materialexc 250 mbut n exc 500 m and deposting where directed at alevel n. exc 1.5 m above the starting point |
| 23 | M&L for Hard core of gauge n.exc.63 mm, broken stone &bouldersdeposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface. |
| 24 | M &L 100 mm thick PCC (1 :4:8) type D2 using 40mm graded stone aggregate as in sub base and foundation complete. |
| 25 | M&L 25 mm thick Sand filling under floors or in foundationincluding watering and consolidation |
| 26 | Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658 -2006 of 60mm thickness, M-35 Grade with grey cement and pigment as approved by Engr-In-Charge. |
| 27 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete |
| 28 | M & L for Granite (of any type) tiles 20 mm thick machine cut,bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing on floor & Kitchen platform etc complete. |
| 29 | M & L for rounding the edges of stone slabs one edge, such as in steps, cooking platform and other simillar situations |
| 30 | S&F vitreous china white Table top wash basin in repairs having size 450mm x 400mm x 160 mm , Rectangle bowl, Snow White in colour , including making hole as per size into the granite cutting etc complete Make:- CERA , Cat No. : S2020101 |
| 31 | Taking down cement plaster on brick or stone walls,ceilingetc including racking out joints, hacking for key, scrubbing down with water etc. |
| 32 | M&L for 10 mm thick cement plaster on Brick or concrete surfaces in CM 1:6 complete. |
| 33 | M&L for 15mm thick cement plaster on stone or concrete surfaces in CM 1:4 in two layer mixed with water proofing compound @ 3% by weight of cement including 10m height steel scaffolding complete .[Note:-WPC shall be measured and paid seprately . |
| 34 | Supply of integral water proofing compound |
| 35 | M&L forpreparing new plaster surfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance asper IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and includingpriming coat of exterior primer applied @ 0.90 litre/ 10sqmall as per manufacturers instructions and directed including 10m height steel scaffolding complete all as specified by GE/Engineer-in-Charge Make :Asian Paint Apex, Berger weather coator equivalent |
| 36 | M&L forpreparing old plastered incl scraping completely of old paintsurfaces of walls andapplying one coats of Priming plastered and other surfaces with alkali resistant priming paint and 02 coats of oil bound distemper complete all as specified. |
| 37 | Demolition of loose concrete cover of RCC columns, beams, slabs, chajjs and the like as directed, roughening and cleaning concrete surfaces with steel wire brushes, washed with water and allowed to dry, including dusting of steel reinforcement, providing fabric mild steel wire mesh 75X75mm of 2mm dia as reinforcement to concrete surfaces, applying adhesive/admixture over steel mesh and providing ordinary portland cement 53 grade and 2 parts of banas sand mixed with adhesive/admixture at the rate as per manufactures instruction or 2% by wt of cement all as directed with apressure of 2 to 2.5 kgs per sqm by guniting machine including necessary padding, steel scaffolding and shuttering for working platform/formwork , patchwork exc 2.5 sqm each etc complete all as specified and directed. |
| 38 | All as per item 32 abovebutpatch work of area nexc 2.5 sqm each |
| 39 | M&L rendering 5 mm thick in CM 1:3as on concerete surface on ceilings finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 40 | M & L for preparation of newly plastered surfaces & applying threecoatsof white wash on ceilings complete as spd & directed |
| 41 | M&L for Preparing new plastered surfacesof wall, priming plastered and other surfaces with alkali resistant priming paint, and applying two coat of oil emulsion distemper complete all as specified |
| 42 | M&L for preparation of existing treatment on surfaces of wall, chajjas etc in any position washing down with water and cleaning the surface from all loose dirt chalk grease fungi algal flakes etc and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and includingpriming coat of exterior primer applied @ 0.90 litre/ 10sqmall as per manufacturers instructions and directed including 10m height steel scaffolding complete all as specified by GE/Engineer-in-Charge. |
| 43 | M & L for preparation of oldplastrered surfaces of ceiling& applying one coatsof white wash complete as spd & directed |
| 44 | M&L for preparation of old wooden surfaces of any description, not otherwise described over 10 cm width or girth and applyone coat of synthetic enamel paint complete all as specified and directed |
| 45 | Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) including iron mongry and removing from site complete all as specified and directed. |
| 46 | Taking downchowkats or frame exc 1.5 sqm but n.exc4 sqm each with shutters (without taking off shuttersfrom the frames). |
| 47 | S&F for Pressed steel frames for doors of size 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified. |
| 48 | S&F 30 mm thick flush shutters, solid core construction, with Block board core and plywoood face panels,commercial type on both sides with one face is covered with decorative face veneer with lipping/frame to match complete all as directed. Note :- Rate = 1620+ 693.20 = 2313.20 |
| 49 | S&F for 35mm thick 2nd class hard wood glazed and skelton shutters divided into squares with plain chamfered or reoundedmiltred and related sash bars number to received glass gauze etc edges of framingplain chamfered or reounded fitted with cutand mitred beads for securing glass etc size of members of shutters as specified inSSR Part-I section 8 clause 8.20(a)supplied and fitted to chawkats |
| 50 | M&L for prepartion newwooden surfaces ofany description, not otherwise described over 10cm width or girth andapplying two coats of synthetic enamed paint over a coat of pink primer. |
| 51 | S&F door sliding bolt aldrop 250 mm long aluminium anodised Make-classic/Shalimar etc equivalent ISI Marked. |
| 52 | S&Fin repair mild steel 300mm ordinary rat tail rod pettern springs including roller and roller plate complete |
| 53 | M& L for Floor door stopper 150mm long , of brass body and tongue, anodised, with hard drawn steel spring, fixed in floor |
| 54 | M&L for solid PVCdoor frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing will be painted to match with printed sheed. |
| 55 | M&L for Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C\" channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 56 | Supply and fix in repairs 25 mm bore Stainless steel heavy duty drapery rod (curtain rod) , cut to length and fix in position including decorative type FINIALS (bracket) colored finish, of approved pattern complete |
| 57 | Taking down existingwater proofing roof treatment of all description and scrapping and properly cleaning of the surface to remove loose particles with wire brushes complete all as specified and directed by Engr-in-Charge |
| 58 | M&L for PCC 1:2:4 B-0 using 12.5mm graded aggregate as levelling course to finished even and smooth with using extra cement.all as specified |
| 59 | M/L forrendering 10mm thick on CM (1:3) on concrete roof top and chajjas surface finished even and smooth to getuniform level surface forlaying of membrane treatement,with using water proofing compound. |
| 60 | M&L for APP modified roof treatment over exissting RCC roof in repairs complete all as specified and as directed by engineer -in-charge and as specified hereunder (a) Applying bitumen primer @ 0.40 lit/sqm with density of 0.87 kg/lit at 25 degree C on the prepared dry roof surface(b) Laying 4mm thick APP membrane including aluminium layer on top, weight not less than 3.50 kg per sqm by torch application with minimum 10cm side lap and 15cm end lap. The laying of membrane shall be got done through an authorised applicator of manufacturer of APP membarane. (c) Over the membrane provide a solar reflective bituminous aluminium paint @ 0.1 kg/sqm prescribed by manufacturer including taking down and refixing any elecric cables, outlet of AC\"s without any damage & wothout any extra cost etc all as specified. |
| 61 | S&F in repairs 15 mm size bib cock (Straight line Model) with wall flange Model No- FLR-504N. Make:- Jaquar/Kohler/Grohe/CERA/Hindware/Jainko. |
| 62 | S & F in repairs 15 mm size pillar taps, cast copper alloy chromium plated, fancy type, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’with long screwed shanksand fly nuts, screwed for iron pipe complete all as specified and as directed. |
| 63 | S&F in repairs 15 mm size stop valve or angle valve cast copper alloy, chromioum plated fancy type, screwed down, high pressure with capston head, screwed both ends for iron pipe or for union all as specified and as directed. |
| 64 | S&F in repairs 15 mm size stop valve with long shank (consealed type) cast copper alloy, chromioum plated fancy type, screwed down, high pressure with capston head, screwed both ends for iron pipe or for union all as specified and as directed. |
| 65 | S & F in repairs 15mm size 2-way Bib cock with single handle and wall flange, Model No-FLR-5041N Make Jaquar/Kohler/Grohe/CERA/Hindware/Jainko. |
| 66 | S & F in repairs Shower Make Model No F-70201155 of CERA/Kohler/Grohe/Hindware/JainkoOverhead Rain shower SS 100 x 100 mmwith 200 mm long shower arm and wall flange complete all as specified and as directed by Engr-In-Charge. |
| 67 | S & F in repairs JG Company Vanity Mirror Cabinet for Washbasin | Premium Wall Mounted Storage Cabinet Bathroom with Door | Multipurpose Bathroom Cabinet Rack with Mirror (White) size 54D x 35W x 12H Centimeters, Wall Mount , Plastic etc complete all as specified and as directed by Engr-In-Charge. |
| 68 | S & F PVC connections 15mm size with PTMT nuts of length 750mm |
| 69 | S & F liquid soap container of PTMT fixed with and incl chromium plated brass screws and wooden/ plastic cleats. |
| 70 | S & F in repairs tubular towel rail, aluminium anodised 20mm dia D type 60 CM long between flanges. |
| 71 | S & F 20 mm size gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and including taking down old gate valve all as specified and as directed. |
| 72 | Material and labour in repairs 15 mm bore mild steel galvanized water tubing, medium grade with all fitting and accessories complete ,concealed fixed to walls / ceiling or laid to floors including taking up or down old tubing and connected fitting, fixture complete. |
| 73 | Taking up or down 20 mm bore steel water tubing including connected fitting, fixture, and disconnection of fitting fixture etc. from tubing complete. |
| 74 | Re-fixing of 20 mm bore galvanized iron tubing medium grade retrieved from item No 73 here-in-before, after cleaning of tube and including all fittings and fixtures fixed to walls / ceiling or laid to floors complete. |
| 75 | Material and labour 20 mm bore mild steel galvanized water tubing, medium grade with all fitting and accessories complete fixed to walls / ceiling or laid to floors complete. |
| 76 | Supply and fix in repairs 32 mm size PVC waste pipe, length 1.20m for wash hand basin / urinal / sink complete. |
| 77 | Supply and fix in repairs 32 mm sizePVC waste coupling of PTMTfor wash hand basin / urinal / sink complete. |
| 78 | S & F in repairs 15 mm high density polyethylene (HDPE) pipes of pressure rating 6 kgf/sq.cm concealed pipe fittings etc complete. |
| 79 | S & F in repairs 20 mm high density polyethylene (HDPE) pipes of pressure rating 6 kgf/sq.cm concealed pipe fittings etc complete. |
| 80 | S&F vitreous china white wash hand basin 550 mm x 450 mm including all necessary fitting such as 15 mm CP pillar cock fancy type, CP waste coupling 32mm dia, PVC waste pipe and brackets including supply and grouting 6 to 8 mm dia GI racket bolt at the back side of WHB and making good existing surfaces, including taking down old wash hand basin complete all as specified and as directed. |
| 81 | S&Fin repairs vitrous china squatting pan orrisa pattern, size 580x440 white with integral foot rests or out going pipe and toflushing pipe, antisyphonage pipe etcplastic water seat white/black pattern flat bottom and cover and mild stel chroumium plated. complete all as specified. |
| 82 | S&F in repairs, PVC low level cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket incl taking down of old EWC with flushing cistern etc complete all as specified and directed . |
| 83 | S & F in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe complete. |
| 84 | S & f in repairs 6 mm thick cornerglass self with aluminum / SS railingincl bracketsfor fixing ( size 300 mm x 300 mm )etc complete. |
| 85 | S & F in repairs Stack clamps out of 50mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75mm to 100 mm dia pipe. |
| 86 | S&F in repairs PVC (SWR) pipes 75mm bore single socketed in any length with ruberring jointsfixed to wall. |
| 87 | S&F in repairs PVC (SWR) pipes 110mm bore single socketed in any length with ruberring jointsfixed to wall. |
| 88 | S&F PVC (SWR) bend 75mm bore anyredious with access door |
| 89 | S&F PVC (SWR) 110mm bore branch piece, single (Single \"Y\") equal orwith acess door. |
| 90 | S & F in repairs PVC 110mm bore (SWR) coupler |
| 91 | S&F PVC (SWR) 110mm bore WC connector with liptype ring |
| 92 | S&F PVC (SWR) 110mm bore in mmvent cowl. |
| 93 | S&F PVC (SWR) 75mm diameter out let in mm floor trap, plain withgrating including jointing with solvent cement. |
| 94 | S&F PVC (SWR) 75mm bore branch piece, single (Single \"Y\") equal orwith acess door. |
| 95 | S&F PVC(SWR) 75mm bore in mm vent cowl. |
| 96 | S & F in repairs PVC (SWR) bends 110mm bore any radius |
| 97 | S&F grating doom grating doom 100 mm diawith waste holeof PTMT (Minimum weight 25 gms) |
| 98 | M & L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement |
| 99 | Demolition of PVC/RCC Water tank up to cap 500 Lts & removal of all retrieved material |
| 100 | S&F 500 litres,Rotational moulded polyethylene water storagetanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part complete all as specified and directed by Engineer-in-Charge.(Note : PVC tanks shall be ISI marked) |
| 101 | Re-securing or easing and adjusting without taking down shutters of any description and size all as specified and as directed |
| 102 | S &F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framedbalusters; walk ways; railings; framework of water tanksand similar work conforming to Fe.290.Gde-E-165 |
| 103 | M & Lfor preparation of new steel surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer. |
| 104 | M&L for DWCPE (SN8) 200 (OD)/175(ID) mmdiameter pipes laid on 150mm thick PCC bad 1:4:8 with excavation in any type of soil at and at depth 0.7m-1.65m deep , incl manholes /drop manhole of standard size made of Brick masonry/RCC with SFRC ventilating cover and frame. includes all items and activities to execute and make sewer line functional. |
| 105 | M&L for Cutting into existing manholes for connecting new drains,making good to pipe and rendering,cutting of existing benching for and forming branch channel 1/2 round or 3/4 section in PCC 1:2:4 ,type B-1 forming existing drain making good to walling and rendering cutting out branch channel and making good benching for 300 mm bore pipe. |
| 106 | Demolition and breaking up drain pipes, 200 mm internal dia (Salt glazed stoneware, AC or reinforced concrete) (internal dia) set in cement mortar including haunching and bed concrete. |
| 107 | Pulling down the existing U/S wiring of any type from concealedwiring carefully of aluminium/copper point wiring (light, fan, bell, socket, power point etc.) with or without conduit, along with all connected accessories such as ceiling rose, switches, sockets, switch boards, fan regulator etc complete andall as directed by EIC |
| 108 | Taking down main switch/DB’s including MCB’s with board andfixture of any description and making good disturbed surface of walls etc complete. |
| 109 | M&L for sub main wiring with two runs of PVC insulated and unsheathed FRLSH cable 650/1100 Volts grade, conforming to IS-1536-1977 multi-stranded 1.5 Sqmm single core, copper conductor drawn through existing conduitsISI marked with accessories and 1.5 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade, ISI marked as earth continuity wire complete all as specified and directed.(Note: Two runs of conductor with one run of earth wire and PVC casing capping will be measured & paid as one unit) |
| 110 | M&L for sub main wiring with two runs of PVC insulated and unsheathed FRLSH cable 650/1100 Volts grade, conforming to IS-1536-1977 multi-stranded 2.5 Sqmm single core, copper conductor drawn through existing conduits ISI marked with accessories and 2.5 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade, ISI marked as earth continuity wire complete all as specified and directed.(Note: Two runs of conductor with one run of earth wire and PVC casing capping will be measured & paid as one unit) |
| 111 | M&L for sub main wiring with two runs of PVC insulated and unsheathed FRLSH cable 650/1100 Volts grade, conforming to IS-1536-1977 multi-strandedSqmm single core, copper conductor drawn through and including PVC cassing cappingISI marked with accessories and 4 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade, ISI marked as earth continuity wire complete all as specified and directed.(Note: Two runs of conductor with one run of earth wire and PVC casing capping will be measured & paid as one unit) |
| 112 | S&F in repair including testing of storage type Water Heater/Geyser of vertical type of capacity 25 Ltr, Rated 2000W,230V, 50Hzauto cutoff with a High tech adjustable thermostat,multifuction saftey valve,Magnesium anode Coated heating element, Rust Proof External Body with Unique Polymer protective coated inner Tank, Red and Green indicator lamp, Suitable for highrise building Suitable for water pressure head upto 8 bars Star rating (BEE): -5 Star,High Density & thick PUF that Ensures energy efficiency and reduced electricity bills ,15 Amps heavy duty plug complete all as specified and directed.Model :-CDR of Make:Racold or Equivalent in Venus/Crompton Greaves/Havells/BajajNote:-The rate quoated shall be in including hanging of Geyser in wall with 2/4 nos of stainless steel fastner of suitable size no extra payment will be allowed to contractor in this regard. |
| 113 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) ®Note old ceiling fan deposited in MES store yard. |
| 114 | Supply and Fix in replacement of PVC body exhaust fan, AC single phase 230/240V of size 300 mm sweep including louyer with net frame including making hole of suitable size/ Alteration to the existing hole to fix the Exhaust fan all as directed by Engineer-in-Charge.(Note: Old unserviceable Exhaust Fan will be deposited in MES store yard). |
| 115 | Supply and Fix in replacement energy saving, evironment friendly, long life, corrosion resistent, impact proof, Mini LED building securitylight made up of pressure die cast housing with prismatic polycarbonate diffuser and individual LEDs with secondary optics and IP 65 protection with LED 20 W light source including material and labour for suitable bracket made of 20 mm dia light grade GI pipe & MS clamps complete with nuts and bolts and washersall as specified and directed by Engineer-in-Charge. |
| 116 | Supply and Fixingin repairs wall mounted decorative ultra slimLED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack instant start with uniform light distribution 10 W 2 ft indoor decorative with 2 Core copper wire from ceiling rose to light fitting all as directed by EIC. |
| 117 | All as per item No 116 above but 20Watt 4 ft LED lighting fixture |
| 118 | S&F in Replacement double doorSheet metal enclosures factory made DBsprotection class IP-43, suitable for fixing of MCBs, Isolators etc, confirming to IS 13032 triple pole and neutral 4 ways with 200 Amp rated bus bar 415 volts powder coatedall as specified. |
| 119 | All as per item No. 118above but SPN 8 way with 200 Amp rated Busbar. |
| 120 | S&F in replacement of isolators, MCBs, etc. In distribution board of the following rating and capacities. |
| 121 | MCCBs 415 volts 63 Amps Capacity, 16 KA |
| 122 | MCB SPN 32 Amps Capacity, \"C\" series, 10 KA |
| 123 | MCBSP of 240 volts 5-32 Amps Capacity, \"C\" series, 10 KA |
| 124 | S&F in replacement, switch piano type, 5 Amp. SP, one way all as directed/ specified. |
| 125 | S&F in replacement socket outlet 3 pin, 5A, flush type all as directed/ specified. |
| 126 | S&F in replacementswitch socket combination 2 in 1, 5/16A 5 in 1 Amp flush type universal all as directed/ specified. |
| 127 | S&F in replacement of ceiling fan regulator all as specified and directedby Engineer-in-Charge. |
| 128 | S&F in replacement lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings all as specified and directed. |
| 129 | S&F in replacement of Ceiling rose 3 phase, PVC/ Polycarbonate body all as directed/ specified. |
| 130 | S&F in replacement of LED lamp,7 watt,type of capacity B22 ,wide operating range 140 V- 280V, in put current 08mA- 30mA ,luman 180- 300, uv and IRfree light ,color temp 6500 K ,cool day light ,up to 80% Energy saving over GLS complete allspecified and directed. |
| 131 | S&F in replacement, same board for 5A switch sockets all as directed/ specified. |
| 132 | S&F in replacement, independent board for 5A switch sockets all as directed/ specified. |
| 133 | S&F in replacement, independent board for 15A switch sockets all as directed/ specified. |
| 134 | S&F in replacement,armoured cable XLPE 35 sqmm 3.5 core all as directed/ specified. |
| 135 | Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes pier holes etc not exc. 10sqm on plan and not exc 1.5m in depth and getting out in hard/dense soil soil complete all as specified and directed by Engineer-in-Charge. |
| 136 | Returning filling in soil and including spreading leveling watering and well ramming in layers n.exc. 25 cm thick complete all as specified and directed. |
| 137 | Removing excavated soil to a distance n.exc. 50 mtr and depositing where directed at a level n.exc. 1.5m above the starting points complete all specified and directed. |
| 138 | M&L for sand cushioning for UG cables using dry river sand; gently punning down all as directed and specified. ( Note : For measurement purpose punned thickness shall be considered) |
| 139 | M & L unreinforced precast concrete cable covers CLASS LV type II, flat size 300 x 180 x 40 mm laid transverse to cable.complete all as specified and directed by Engineer-in-Charge. |
