|
| 1 | Demolition of brick work or stone/ boulder masonry built in cement mortar or cement lime mortar including all quions, wall, arches, pillars, man-holes, drain etc complete all as specified and directed. |
| 2 | M & L for burnt clay brick work with sub-class \"B\" bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete all as specified and directed. |
| 3 | Similar as Item No .2 But Except Bricks complete all as specified and directed. |
| 4 | M & L for Burnt Brick work with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, cement mortar 1:4 complete all as specified and directed. |
| 5 | Taking down cement plaster of any description and thickness on walls/ceilings etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 6 | M & L rendering 15mm thick in CM 1:4 mixed with liquid water proofing compound on fair faces of brick work ,concrete surface of wall, fin, facia, chajjas, parapet and similar article finished surface even and smooth without using extra cement complete all as specified and directed. |
| 7 | M & L rendering 10 mm thick in CM 1:6 mixed with liquid water proofing compound onother than fair faces of brick work ,concrete surface of wall, fin, facia, chajjas, parapet and similar article finished surface even and smooth without using extra cement complete all as specified and directed. |
| 8 | M&Lfor 10 mm thick rendering on brick work or concrete surfaces in CM 1:3 as in ceiling of roof slab ,fin, facia, culvert, chajjas, parapet and similar article etcfinishing surfaces even and smooth without using extra cement complete all as specified and directed. |
| 9 | M & L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 10 | M&L for preparation of newly plastered surfaces of walls & applying Three coats of white wash Complete all as specified and directed. |
| 11 | M&L for complete removal of existing treatment all as specified and directed. |
| 12 | M & L for preparation of newly plastered surfaces or Completely Removal Surafce & applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004 for Camoflauge/Normal Pattern for both, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specifiedand directed by Engineer-in-Charge. |
| 13 | M & L for preparation of newly plastered surfaces of wall and applying minimum 02mm thick white cement based wall care putty on wall surfaces & making smooth surface and applying two coat of distemper oil emulsion over and including one coat of primer complete all as specified and directed. |
| 14 | M&L for one coat of distempering with 1st quality acrylic distemper(ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification on old surfaces of walls including prepration of surfaces. |
| 15 | M & L for demolition of Concrete of any description and in any position not otherwise specifically provided complete all as specified and directed. |
| 16 | M & L for cement concrete 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as in Sub-Base , foundations, filling and mass concrete complete all as specified and directed. |
| 17 | M&L for 75mm thick plain Cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection, apron, path and paving finished even and fair complete all as specified and directed. |
| 18 | M& L for Cement Concrete 1:2:4, type B-0(using 12.5 mm stone agg.) in sub base and other Simliar Works complete all as specified and directed. |
| 19 | M&L for PCC 1:2:4 Type B-1 (using 20mm graded crushed stone aggregate) as in coping / benching, roof kerb etc including necessary formwork / moulds complete all as specified and directed. |
| 20 | Demolition of RCC of any description slab , beam , Coloumn, shelves , cover slabs for drain & manholes,chajjas, water tank ,chullah hoods etc and in any position including cutting reinforced as required complete all as specified . |
| 21 | M/L RCC 1:2 :4 typeB1 ( 20mm graded aggregate ) in foundation and plinth beams, etc in sub structures. |
| 22 | M/L RCC 1:2 :4 type B1 ( 20mm graded aggregate ) in Columns |
| 23 | M/L RCC 1:2 :4 type B1 ( 20mm graded aggregate ) in beams |
| 24 | M/L RCC 1:2 :4 type B1 ( 20mm graded aggregate ) in slabs |
| 25 | M/L form work to sides of concrete foundations, footings, bases of columns, raft and raft beams sides and soffits (if any) of Foundation and Plinth Beams and similar work vertical or to better all specified and directed. |
| 26 | M/L form work to sides of columns for fair finished surfaces. |
| 27 | M/L form work to lintels , cantilevers , shelves, including supports, overhangs etc |
| 28 | M/L form work to slab and roof beam all specified and directed. |
| 29 | Formwork to edgesof concrete flats, treads, break in floors, windows cill, concrete railings, openings in concrete walls , floors and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, Horizontal or slopping and Similar Work exc 10cm but n exc 20 cm wide finished fair and smooth. |
| 30 | M&L for TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending, spirally etc and binding with and including MS (annealed) wire not less than 0.90mm dia complete all as specified and directed. |
| 31 | M&L for TMT bars 6 to 8mm diacut to length, bent to shape required, including cranking, bending, spirally etc and binding with and including MS (annealed) wire not less than 0.90mm dia complete all as specified and directed. |
| 32 | Glazed ceramic tiles coloured, (first quality), of size 300x450mm x7mm thick on vertical surfaces such as skirting dados and risers to walls etc, joint free/joint less, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces over and including 10 mm thick rendering in CM 1:3 incl taking down existing tiles all as specified and directed. |
| 33 | M & LVitrified Ceramic tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc , set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in CM 1:4including dismantling of tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified |
| 34 | All as per srl item No 33 above but as in vertical/skirting surface etc over and including 10mm thick rough cement plaster to receive tiles in CM 1:4 |
| 35 | M & LVitrified Ceramic tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles exc 0.42 but not exceeding 1 sqm (size 600mm*1200mm, 900mm*900mm, 1000mm*1000mm) in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in CM 1:4including dismantling of tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified |
| 36 | All as per srl item No 35 above but as in vertical/skirting surface etc over and including 10mm thick rough cement plaster to receive tiles in CM 1:4 |
| 37 | M&L for non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 15 mm thick cement screed bed in CM1:4 incl taking down existing tiles complete all as specified. |
| 38 | Dismantling wall and ceiling boards or insulation boards any thickness, any description including cover fillets complete all as specified and directed |
| 39 | S & F of Solid PVC Wall Lining consisting of 5mm thick wood grain printedPVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and as directed.Note :- PVC frame shall be measured and paid for separately. |
| 40 | S & F of 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and as directed. |
| 41 | S & F forsuspended false ceiling system using chicago metallic (E grid)exposed supended system, grid section size 600mm X 600mm comprising of GI powder coated Main Runner of dimensions 39 mm X 24mm X 0.8mm thick (thickness comprising of GI/0.4+ PPPCGS/0.3mm & weight of runner 1.35 kg for 3600mm length) Cross Tee of dimensions 29mm X24mmX0.8mm thick and thick wall angle 22.2mmX22.2mmX 0.65 mm thick ( thickness comprising of GI/0.35+ PPPCGS/0.3mm & weight of angle0.70 kg for 3050mm length)with and including 4mm thick HPSC(High pressure steam cured) pre-primed , self embossed . textured designer board, water resistant termite resistant , fire resistant for insulation and acoustic purpose to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins of the roof with butterfly clips(Wt-0.007 Kg/clip)hold down clips (Wt-0.0035 Kg/clip) complete all as directed. |
| 42 | Demolition on of existing roof treatment of APP/mudphuska including removing the salvage from the work site all as specified and directed by Engr-in-charge and Follow Instructions-(i) M&L for Screed bed or bedding layer of mortar 15 mm thickin CM 1:4 for laying floor finishes all as specified and directed(ii) Cleaning the surface and made free of dirt, foreign particles, laitance and supplying and applying High build elastomeric waterproofing coating based on pure, hydrophobic polyurethane, cold applied of spray / brush applied, membrane with an elongation of 280% and tensile strength of 2.7 N/mm2 as per ASTM D 2370, crack bridging ability of 3mm, no leakage upto 5 bars of water pressure as per DIN 1048, min 88 % solid content. The system includes final base preparation, epoxy primer 1:1(Resin:hardner) application with 100 % water dilutionand Pure polyurethane application in 2 coats with a total min consumption of 1.25 Kg per SQM .Application should be done by a company authorised applicator. Approved Make- Asian Paints, Fosrock and BIRLA |
| 43 | Dismantling plain or corrugated asbestos/CGI sheeting, any gauge thickness, incl nainital or similar pattern roof covering, complete all as spd. |
| 44 | S & Fpre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in sunshades ,roof covering, cladding to wall etc fixed with self tapping screws complete all as specified and directed. |
| 45 | S & Fpre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall and as in ridge etcfixed with self-tapping screws complete all as specified and directed. |
| 46 | Dismantling timber scantlings 40sqcm and over in section, in any position as in wooden trusses in framed work of any description complete all as specified and directed. |
| 47 | S &F rolled hollow section as in main and cross beams, hip and jack rafters; purlins where connected to a common rafters and rails and guides for sliding doors;and supports to roof covering, sun-shades,vertical poles etc fixed with angle cleats or other connecting plates Fe-410-W(Gde-E-250) quality B complete all as specified complete all as specified and directed. |
| 48 | S &F in repair Framed work such as grills,gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; railings; framework of water tanks ,framed and hung as in steel gates including pintle hinges, stops,hand-made sliding bolts etc and similar work conforming to Fe.290.Gde-E-165,ornamental and intricate design complete all as spd and directed. |
| 49 | Excavation in post hole for similar hole each n exc 0.50 cum getting out returning filling in and ramming earth or broken rubbel mixed with earth around in layer not exc 25 cm Any type of soil complete. |
| 50 | Taking down chowkhats of frames exceeding 1.5 Sqm and n.exc 4 Sqm(without taking off shutters from the frames) all as spd. |
| 51 | Taking down chowkhats of frames n.exc 1.5 Sqm (without taking off shutters from the frames) all as spd. |
| 52 | Taking down shutters exc 1 Sqm but n.exc 2 sqm all as spd. |
| 53 | S&F Steel window/ventilator factory made, made out of mild steel box type and shutter suitable for double shutter i.e. Glazed and gauged shutter. Glazed shutter made out of hollow\" section with sash bar and gauged shutter made out of hollow section without sash bar including hinges, tower bolt, handle, grill10 mm sq bar includingtwo coat of synthetic enamel paint overonecoat of red oxide primer, tarred hold fasts, PCC bed blocks for fixing hold fast, includingplain/figured glass 3mm thick and stainless steel wire cloth 0.36mm nominal dia of wire & average width of aperture 1.18mm & fixed with stainless steel wire staples`etc complete all as per details shown in drawing No CEPZ/C-TD/032/13 sheet No 1/2 & 2/2including taking down existing spoiled and unserviceablewindows/ventilators of any type ( wooden/steel) complete all as specified and directed |
| 54 | S&F pressed steel frame made out of MS sheet 1.25mm thick of size 105x60 mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc all as specified. |
| 55 | S&F pressed steel frame made out of MS sheet 1.25mm thick of size 125x60 mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc all as specified. |
| 56 | PCC (1:3:6) type C-1 using 20mm graded crushed stone aggregate as in back filling of chowkhat |
| 57 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. |
| 58 | S&F Factory made single extruded WPC (Wood PolymerComposite) UV Coated solid plain flush door shutter of 32 to 35mm sizecomprising of virgin polymer of K value 58-60.(Suspension Grade), calcium carbonate and naturalfibers (wood powder/ rice husk/wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screwwithdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm², modulus ofelasticity 850 N/mm² and resistance to spread of flameof Class A category with property of being termite/borerproof, water/moisture proof and fire retardant and fixingwith stainless steel butt hinges of required size withnecessary full body threaded star headed counter sunk S.S screws NO Black screw and the top end two hinges to be provided, all as per direction of Engineer… |
| 59 | S&F 30mm thick second class hardwood glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) complete all as specified and directed. |
| 60 | S &F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or using metal nut and bolts complete all as specified . |
| 61 | S&F In Repair Factory made single extruded WPC (Wood PolymerComposite) UV Coated solid plain board of 18 to 20 mm sizecomprising of virgin polymer of K value 58-60.(Suspension Grade), calcium carbonate and naturalfibers (wood powder/ rice husk/wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screwwithdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm², modulus ofelasticity 850 N/mm² and resistance to spread of flameof Class A category with property of being termite/borerproof, water/moisture proof and fire retardant and fixingwith stainless steel butt hinges of required size withnecessary full body threaded star headed counter sunk S.S screws NO Black screw and the top end two hinges to be provided, all as per direction of Engineer… |
| 62 | Supply and fixing in repair soft closing hydraulic hings ( Dadduhinges)complete with all accessories with screw all as specified and directed |
| 63 | S & F Continuous (piano) hinges, stainless Steel , bright finish or electrogalvanised with width of flaps (When open) 30 mm complete all as specified and directed. |
| 64 | S&F 100mm long Hasp & staple, safety type, aluminum anodised with hinge pin including bolt to hinge plate with screwscomplete all as specified and directed. |
| 65 | S & F Magnetic Catcher, and brass body/Steel body and striking plate including letting in and fixed complete all as specified and directed. |
| 66 | S&F MS Butt Hinges medium weight, cold rolled Stainless steel 100 mm fixed to steel/wooden shutters complete all as specified and directed. |
| 67 | S&F for Stainless steelbarrel tower bolts 150 mm size,with bright boltfixed in repairs complete all as specified and directed. |
| 68 | S&F for Stainless steelpressed handles 150 mm size complete fixed complete all as specified and directed. |
| 69 | S&F for Stainless steel l sliding door bolts \"bolt type\" 250 mm size with and including 6 nuts and bolts complete fixed in repairs complete all as specified and directed. |
| 70 | S&F in repairs cast iron body hydraulic door closers universal type designation No 3 suitable for door shutters of 851 to 1000 mm wide complete all as specified and directed. |
| 71 | S&F in repair 150mm dia Floor door stopper of aluminum alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 72 | S&F in repair MS Rat tail pattern/helical doors spring 150 to 200 mm, ordinary springs including roller and roller plate complete all as specified and directed. |
| 73 | M & L preparation of wood or wood based surfaces of any descriptionover 10 cm width or girth and applying two coats of synthetic enamelpaint complete. |
| 74 | S&F in Repair Non-adhesive wallpaper, Digitally printed on superior quality, smooth/ matt/glazed print wallpaper.Weight: more than 150 gsm non-woven paper. Fully FR rated for domestic and commercial applicationsincluding adhesive paste,gum and other necessory asscessories pasted by experts Complete all as spd and directed by engr-in-chge. |
| 75 | S&F Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). area Exceeding 2 Sqm Each , Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of wateretc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and including all required accessories. Note: The unit rate quoted by contractor excludes cost of glass. |
| 76 | Providing and fixing factory made uPVC white colour casement Openable Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, includingNeceassary channels, rails & fittings asreqired &drilling ofholes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 77 | Supply and fixing factory made uPVC white/ coloured fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality,. IncludingGlass 5.5mm size excand other Accessories all complete as per approved drawing & direction of Engineer-in-Charge |
| 78 | S & F Powder Coated in any colour (Thickness or powder coating not less than 50 micron) aluminum frame forpartition / doors / windows / ventilators /sliding shutters etc with one or more rebates including joining cleat for fixing etc including taking down old frames with shutters complete all as specified |
| 79 | S & F Powder Coated in any colour (Thickness or powder coating not less than 50 micron) aluminium door shutters, aluminium section (Minimum 81X44 mm of thickness of 16 Gauge or Upgraded)including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,aluminum snap beading, screws etc complete all as specified |
| 80 | S & F Powder Coated in any colour (Thickness or powder coating not less than 50 micron) aluminium window and ventilator shutters, rolling/sliding type, without sash bar, aluminium section (Minimum 44X44mm of thickness of 16 Gauge or Upgraded)including necessary joining cleats, glazing clips, rubber packing,aluminium snap beading, screws etc,suitable handle (1 no.),rolling wheal etc complete all as specified |
| 81 | S & F Powder Coated in any colour (Thickness or powder coating not less than 50 micron) aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections(Minimum 44 X44 mm of thickness of 16 Gauge or Upgraded)including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 nos) ,suitable handle (1no) complete all as specified |
| 82 | S & F Powder Coated in any colour (Thickness or powder coating not less than 50 micron) designer grill (weight of grill shall not less than 2.00 KG/Sqm) of 07mm dia and aperture of 75mmx75mm fixed with and including aluminum chennal section of required sizefixed to aluminium windows/ ventilators Complete all as specified and as directed. |
| 83 | S &F for 5.5mm thick selected quality tinted sheet glass including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws etcin aluminum partition / doors / windows / ventilators etc complete all as specified and directed. |
| 84 | Grinding with machine grinderof granite stone /terrazzo topping with marble aggregate /marble Stone slab / kota slab etc. as in old floor, wall, cooking platform, shelf etc & polishing complete all as specified and directed. |
| 85 | M & L machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete over screed bed or bedding layer 20 mm thick in cement mortar 1:4, complete all as specified and as directed. |
| 86 | M & L machine kota stone slab 16-18mm mm thick in riser of steps, skirting, dado and pillar laid over backing coat 10mm thick in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and as directed. |
| 87 | Providing and laying 60mm thick factorymade chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & patternover and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand all as specified by Engr in charge. |
| 88 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand;complete. |
| 89 | Refixing of machine pressed precast concrete interlocking paver block any shape & size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade rubber mouldedfinish with grey cement and pigment complete all as secified and as directed.Note-Shapes of interlocking paver block shall be triangular/Zigzag/Haxagon/or other ,Colour of paver blocks,laying pattern approved by GE. |
| 90 | Refixing of machine pressed precast concrete interlocking paver block any shape & size confirming to IS 15658-2006 of 80 mm thickness, M-40 grade rubber moulded finish with grey cement and pigment complete all as secified and as directed.Note-Shapes of interlocking paver block shall be triangular/Zigzag/Haxagon/or other ,Colour of paver blocks,laying pattern approved by GE. |
| 91 | M & L sand filling under floors or in foundations including watering and consolidation or layer of sand cushioning below interlocking paver blockcomplete all as specified and as directed. |
| 92 | S&F Cement concrete tiles 30cm x 30cm x22mm thick, with grey cement & pigment machine pressed; set, jointed & pointed in neat cement slurry in floors ,path & cut , polished over and including dismantling of tile and, 20mm thick secreed bed or bedding in CM 1:6 complete all as secified and as directed. |
| 93 | Preparing new surfaces of steel of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 94 | Taking up or down 15mm bore, steel tubing and connection including cleaning for refixing or removal from site complete all as specified and directed. |
| 95 | All as per srl item No 94.00 above but 20mm bore Steel water tubing complete all as specified and directed. |
| 96 | S & F15mm bore Steel water tubing \"medium grade\", galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 97 | All as per srl item No 96.00 above but20mm bore Steel water tubing |
| 98 | Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 toends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubing or conduit wiring, etc and making good, cutting not exceeding 10cm girth complete all as specified and directed. |
| 99 | S&F in repair Door cill powder coated aluminum Rubber type screwed down to shutters complete all as specified and directed. |
| 100 | Taking down eaves gutter and rain water pipe any size any pattern ,PVC/ AC pipeincluding all fittings ,Internal dia of pipe in 75/110mm complete all as specified . |
| 101 | S&F for PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 102 | S&F for PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 103 | S&F for PVC (SWR) bendsISI marked any radius 75mm dia complete all as spd and directed. |
| 104 | S&F for PVC (SWR) bendsISI marked any radius 110mm dia complete all as spd and directed. |
| 105 | Disconnecting existing tanks (PVC/RCC) of capacity exc 250 & not exc 500 liters, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position & Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and directed. |
| 106 | S & FRotational moulded polyethylene water storage tanks of 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of old PVC/RCC water tanks complete all as specified and directed. |
| 107 | All as per srl item No 106.00 above but water storage tanks of 1000 ltrs capacity complete all as specified and directed. |
| 108 | S & Fin repair Ball valves 20mm bore high pressure of PTMT with epoxy coated aluminum rod & high-density plastic bal screwed for iron pipe & fixed (min. weight 20mm-210 gms) complete all as specified and directed. |
| 109 | S & F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe),Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. complete, including Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed. |
| 110 | S & F in repair forOne Piece EWC S Concealed with Soft Close Seat Cover and Twin Flush Fittings 300 mm (710 L x 370 W x 770 H) mm Type One Piece Toilet S-Trap, Colour Snow White, Finish Gloss Finish Material Ceramic complete all as specified and directed. |
| 111 | S & F in repair for vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) squatting pan including connection to trap, and to flushing pipe, anti-syphonagepipe, etc. complete including making good to floor complete all as specified anddirected. |
| 112 | S & F in repair for Plastic water closet seat cover, any colour, closed pattern with recessed bottom, & cover & mild steel CP or aluminized hinging device complete all as specified and directed. |
| 113 | S&F in repair forfor Vitreous China wash basin, white or in matching colour of tiles, flat back, size 630x450mm including brackets, CP brass waste fitting 32 mm dia,PVC waste pipe 750 mm long( Minimum) cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed. |
| 114 | S & F in repair for 10 ltrs capacity PVC valve less, syphonic action type, flushing cistern, low level, white, with intel, ball valve, float and handle including brackets ,fush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specified and directed. |
| 115 | S & F in repair for 15mm dia PVC connections 600mm long with PTMT nuts complete all as specified and directed. |
| 116 | S & F in repair for 125mm dia chromium plated perforated grating with hole/without hole for waste pipe fixed over floor/nahani trap complete all as specified and directed. |
| 117 | S & F in repair for 600mmx450mm beveled edge mirror of selected quality glass not less than 5.5 mm thick with edges rounded or beveled , mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 118 | S & F in repair 15mm bore dia fancy type, chromium plated angular valves /stop valves, cast copper alloy, screwed down, high pressure ,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed (minimum weight 575 grams) complete all as specified and directed. |
| 119 | S&F in repair for 15 mm bore chromium plated fancy type Bib taps, cast copper alloy with crutch or above butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed (minimum weight 575 grams) complete all as specified and directed. |
| 120 | S & F in repair 15mm bore dia Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed for basin, sink, bath complete all as specified and directed. |
| 121 | S&F in repair Hand Shower (Health Faucet) with 8 mm dia,1.2 m longFlexible Tube Chrome Finish & Wall Hook for Water closet complete all as specified and directed. |
| 122 | S & F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 123 | S & F in repair corner glass shelf with bracket fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed. |
| 124 | S&F in repair chrome finish Toilet paper Roll Holderwith fixing arrangement complete all as specified and as directed. |
| 125 | S&F in repair Stainless Steel Soap Dish or Soap Holder Dish for Bathroom with fixing arrangement complete all as specified and as directed. |
| 126 | S & F in repair for 75mm PVC floor trap, ISI marked with perforated grating incl jointing to waste pipe fixed with solventcement complete all as specified. |
| 127 | Repairs to any type of wooden joinery works such asdoor, window, Ventilator, wardrobes, cupboard, kitchen cabinet of any description by taking down & re-fixing in the same opening including Re-securing, easening / plaining, adjusting ,re-fixing builders hardware, renewal ofscrews, welding (if required) etc making smooth functioning etc complete all as specified and directed. |
| 128 | S&F in repair for fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed (minimum weight 665 grams) complete all as specified and directed. |
| 129 | S & F in repair 32mm bore PVC waste pipe flexible type including all cups and sockets with minimum length 800mm complete all as specified and directed. |
| 130 | M & L03 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane including hacking out old broken glass from wooden/steel frames complete all as specified and directed. |
| 131 | M & L for 04mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane including hacking out old broken glass from wooden/steel frames complete all as specified . |
| 132 | Preparing surface of sunken slab in toilet flooringand applying 15 mm thick cement plaster 1:4 cement sand mortar with integral water proofing compound both on floor and wall. including, laying and testing ofbituminous coating system based on bituminous emulsion, including application of one coat of primer and laying of app membrane as per manufacturer specification in sunken portion withand including sunken floor shall be filled with brick concrete 1:4:8 as per existing thickness ,a pipe of dia 40mm 600mm long GI spout incl. fitting in floor and incl.demolition of floor complete all as specified. |
| 133 | Taking Out the Earth/mud/soil of any type from any Position and Refilling it in 30 CM layers and each layer should rammed By minimum 30 blows in plain manner Directed by Engr-in-Charge and complete all as specified . |
